[POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360

Compatible names should refer to a specific version of the hardware,
without wildcards.  Change each instance of mv64x60 to mv64360, which
is the oldest version we currently support.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 21 insertions, 21 deletions

diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
index 822aac7e5bb..cb26b007980 100644
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -46,7 +46,7 @@
                 #address-cells = <1>;
                 #size-cells = <1>;
                 model = "mv64360";                      /* Default */
-                compatible = "marvell,mv64x60";
+                compatible = "marvell,mv64360";
                 clock-frequency = <133333333>;
                 reg = <0xf1000000 0x10000>;
                 virtual-reg = <0xf1000000>;
@@ -74,7 +74,7 @@
                         #address-cells = <1>;
                         #size-cells = <0>;
                         device_type = "mdio";
-                        compatible = "marvell,mv64x60-mdio";
+                        compatible = "marvell,mv64360-mdio";
                         PHY0: ethernet-phy@1 {
                                 device_type = "ethernet-phy";
                                 compatible = "broadcom,bcm5421";
@@ -95,7 +95,7 @@
                         reg = <0x2000 0x2000>;
                         eth0 {
                                 device_type = "network";
-                                compatible = "marvell,mv64x60-eth";
+                                compatible = "marvell,mv64360-eth";
                                 block-index = <0>;
                                 interrupts = <32>;
                                 interrupt-parent = <&PIC>;
@@ -104,7 +104,7 @@
                         };
                         eth1 {
                                 device_type = "network";
-                                compatible = "marvell,mv64x60-eth";
+                                compatible = "marvell,mv64360-eth";
                                 block-index = <1>;
                                 interrupts = <33>;
                                 interrupt-parent = <&PIC>;
@@ -115,7 +115,7 @@
 
                 SDMA0: sdma@4000 {
                         device_type = "dma";
-                        compatible = "marvell,mv64x60-sdma";
+                        compatible = "marvell,mv64360-sdma";
                         reg = <0x4000 0xc18>;
                         virtual-reg = <0xf1004000>;
                         interrupt-base = <0>;
@@ -125,7 +125,7 @@
 
                 SDMA1: sdma@6000 {
                         device_type = "dma";
-                        compatible = "marvell,mv64x60-sdma";
+                        compatible = "marvell,mv64360-sdma";
                         reg = <0x6000 0xc18>;
                         virtual-reg = <0xf1006000>;
                         interrupt-base = <0>;
@@ -134,7 +134,7 @@
                 };
 
                 BRG0: brg@b200 {
-                        compatible = "marvell,mv64x60-brg";
+                        compatible = "marvell,mv64360-brg";
                         reg = <0xb200 0x8>;
                         clock-src = <8>;
                         clock-frequency = <133333333>;
@@ -143,7 +143,7 @@
                 };
 
                 BRG1: brg@b208 {
-                        compatible = "marvell,mv64x60-brg";
+                        compatible = "marvell,mv64360-brg";
                         reg = <0xb208 0x8>;
                         clock-src = <8>;
                         clock-frequency = <133333333>;
@@ -166,7 +166,7 @@
 
                 MPSC0: mpsc@8000 {
                         device_type = "serial";
-                        compatible = "marvell,mpsc";
+                        compatible = "marvell,mv64360-mpsc";
                         reg = <0x8000 0x38>;
                         virtual-reg = <0xf1008000>;
                         sdma = <&SDMA0>;
@@ -186,7 +186,7 @@
 
                 MPSC1: mpsc@9000 {
                         device_type = "serial";
-                        compatible = "marvell,mpsc";
+                        compatible = "marvell,mv64360-mpsc";
                         reg = <0x9000 0x38>;
                         virtual-reg = <0xf1009000>;
                         sdma = <&SDMA1>;
@@ -205,14 +205,14 @@
                 };
 
                 wdt@b410 {                      /* watchdog timer */
-                        compatible = "marvell,mv64x60-wdt";
+                        compatible = "marvell,mv64360-wdt";
                         reg = <0xb410 0x8>;
                         timeout = <10>;         /* wdt timeout in seconds */
                 };
 
                 i2c@c000 {
                         device_type = "i2c";
-                        compatible = "marvell,mv64x60-i2c";
+                        compatible = "marvell,mv64360-i2c";
                         reg = <0xc000 0x20>;
                         virtual-reg = <0xf100c000>;
                         freq_m = <8>;
@@ -226,18 +226,18 @@
                 PIC: pic {
                         #interrupt-cells = <1>;
                         #address-cells = <0>;
-                        compatible = "marvell,mv64x60-pic";
+                        compatible = "marvell,mv64360-pic";
                         reg = <0x0 0x88>;
                         interrupt-controller;
                 };
 
                 mpp@f000 {
-                        compatible = "marvell,mv64x60-mpp";
+                        compatible = "marvell,mv64360-mpp";
                         reg = <0xf000 0x10>;
                 };
 
                 gpp@f100 {
-                        compatible = "marvell,mv64x60-gpp";
+                        compatible = "marvell,mv64360-gpp";
                         reg = <0xf100 0x20>;
                 };
 
@@ -246,7 +246,7 @@
                         #size-cells = <2>;
                         #interrupt-cells = <1>;
                         device_type = "pci";
-                        compatible = "marvell,mv64x60-pci";
+                        compatible = "marvell,mv64360-pci";
                         reg = <0xcf8 0x8>;
                         ranges = <0x01000000 0x0        0x0
                                         0x88000000 0x0 0x01000000
@@ -285,28 +285,28 @@
                 };
 
                 cpu-error@0070 {
-                        compatible = "marvell,mv64x60-cpu-error";
+                        compatible = "marvell,mv64360-cpu-error";
                         reg = <0x70 0x10 0x128 0x28>;
                         interrupts = <3>;
                         interrupt-parent = <&PIC>;
                 };
 
                 sram-ctrl@0380 {
-                        compatible = "marvell,mv64x60-sram-ctrl";
+                        compatible = "marvell,mv64360-sram-ctrl";
                         reg = <0x380 0x80>;
                         interrupts = <13>;
                         interrupt-parent = <&PIC>;
                 };
 
                 pci-error@1d40 {
-                        compatible = "marvell,mv64x60-pci-error";
+                        compatible = "marvell,mv64360-pci-error";
                         reg = <0x1d40 0x40 0xc28 0x4>;
                         interrupts = <12>;
                         interrupt-parent = <&PIC>;
                 };
 
                 mem-ctrl@1400 {
-                        compatible = "marvell,mv64x60-mem-ctrl";
+                        compatible = "marvell,mv64360-mem-ctrl";
                         reg = <0x1400 0x60>;
                         interrupts = <17>;
                         interrupt-parent = <&PIC>;
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index 9960421eb6b..8b3607cb53f 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -119,7 +119,7 @@ int serial_console_init(void)
 
         if (dt_is_compatible(devp, "ns16550"))
                 rc = ns16550_console_init(devp, &serial_cd);
-        else if (dt_is_compatible(devp, "marvell,mpsc"))
+        else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
                 rc = mpsc_console_init(devp, &serial_cd);
         else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
                  dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||