[MIPS] MTX-1 code style cleanup

Fix many errors and warnings given by checkpatch.pl:

- space after opening and before closing parentheses;

- use of C99 // comments;

- leading spaces instead of tabs;

- brace not on the same line with 'else' in the 'if' statement;
  statement;

- printk() without KERN_* facility level;

- using simple_strtol() where strict_strtol() could be used.

- including <asm/gpio.h> instead of <linux/gpio.h>.

In addition to these changes, also do the following:

- insert spaces between operator and its operands;

- replace tab between the function type and name with space in
  mtx1_pci_idsel() declaration;

- remove space after the type cast's closing parenthesis;

- insert missing space before closing brace in the array/structure
  initializers;

- update MontaVista copyright;

- remove Pete Popov's old email address...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

5 files changed, 46 insertions, 52 deletions

diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 85a90941de4..7c67b3d33be 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
 #
 #  Copyright 2003 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#       ppopov@mvista.com or source@mvista.com
+#  Author: MontaVista Software, Inc. <source@mvista.com>
 #       Bruno Randolf <bruno.randolf@4g-systems.biz>
 #
 # Makefile for 4G Systems MTX-1 board.
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 5736354829c..3f8079186cf 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      4G Systems MTX-1 board setup.
  *
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *         Bruno Randolf <bruno.randolf@4g-systems.biz>
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -34,7 +33,7 @@
 #include <asm/mach-au1x00/au1000.h>
 
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int    mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
 
 void board_reset(void)
 {
@@ -45,36 +44,36 @@ void board_reset(void)
 void __init board_setup(void)
 {
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-        // enable USB power switch
-        au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
-        au_writel( 0x100000, GPIO2_OUTPUT );
+        /* Enable USB power switch */
+        au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+        au_writel(0x100000, GPIO2_OUTPUT);
 #endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
 
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
-        au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+        au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
 #else
         au_writel(0xf, Au1500_PCI_CFG);
 #endif
 #endif
 
-        // initialize sys_pinfunc:
-        au_writel( SYS_PF_NI2, SYS_PINFUNC );
+        /* Initialize sys_pinfunc */
+        au_writel(SYS_PF_NI2, SYS_PINFUNC);
 
-        // initialize GPIO
-        au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
-        au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
-        au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
-        au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
-        au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
+        /* Initialize GPIO */
+        au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+        au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+        au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+        au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+        au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
 
-        // enable LED and set it to green
-        au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
-        au_writel( 0x18000800, GPIO2_OUTPUT );
+        /* Enable LED and set it to green */
+        au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+        au_writel(0x18000800, GPIO2_OUTPUT);
 
         board_pci_idsel = mtx1_pci_idsel;
 
-        printk("4G Systems MTX-1 Board\n");
+        printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
 int
@@ -82,20 +81,18 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 {
 #define MTX_IDSEL_ONLY_0_AND_3 0
 #if MTX_IDSEL_ONLY_0_AND_3
-       if (devsel != 0 && devsel != 3) {
-               printk("*** not 0 or 3\n");
-               return 0;
-       }
+        if (devsel != 0 && devsel != 3) {
+                printk(KERN_ERR "*** not 0 or 3\n");
+                return 0;
+        }
 #endif
 
-       if (assert && devsel != 0) {
-               // suppress signal to cardbus
-               au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
-       }
-       else {
-               au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
-       }
-       au_sync_udelay(1);
-       return 1;
+        if (assert && devsel != 0)
+                /* Suppress signal to Cardbus */
+                au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+        else
+                au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+        au_sync_udelay(1);
+        return 1;
 }
 
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index c015cbce1cc..33a4aebe0cb 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      4G Systems MTX-1 board setup
  *
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *         Bruno Randolf <bruno.randolf@4g-systems.biz>
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -47,8 +46,8 @@ void __init prom_init(void)
         unsigned long memsize;
 
         prom_argc = fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
 
@@ -56,6 +55,6 @@ void __init prom_init(void)
         if (!memsize_str)
                 memsize = 0x04000000;
         else
-                memsize = simple_strtol(memsize_str, NULL, 0);
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 78d70c42c9d..f2bf02951e9 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
- [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
- [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
- [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
- [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+        [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+        [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+        [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+        [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+        [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+        [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+        [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+        [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-       { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+       { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
        { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
        { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
        { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index a7edbf0829a..9807be37c32 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/gpio.h>
-
 static struct gpio_keys_button mtx1_gpio_button[] = {
         {
                 .gpio = 207,