aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
authorPaul Walmsley <paul@pwsan.com>2008-03-18 04:35:15 -0400
committerTony Lindgren <tony@atomide.com>2008-04-14 13:29:38 -0400
commit6b8858a972a0eff1dc1ab77b0fd9fc25387c217c (patch)
treea34e94f4d372670c5125e8f490c85e9364d222df /arch/arm/mach-omap2
parent543d93781a3c744017594d0721c4c1814a26bcce (diff)
ARM: OMAP2: Change 24xx to use shared clock code and new reg access
This patch changes 24xx to use shared clock code and new register access. Note that patch adds some temporary OLD_CK defines to keep patch more readable. These temporary defines will be removed in the next patch. Also not all clocks are changed in this patch to limit the size. Also, the patch fixes few incorrect clock defines in clock24xx.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/Makefile2
-rw-r--r--arch/arm/mach-omap2/clock.c2
-rw-r--r--arch/arm/mach-omap2/clock24xx.c319
-rw-r--r--arch/arm/mach-omap2/clock24xx.h320
-rw-r--r--arch/arm/mach-omap2/memory.c48
-rw-r--r--arch/arm/mach-omap2/memory.h2
6 files changed, 467 insertions, 226 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index be2b671552a..a3b2507fcc5 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
3# 3#
4 4
5# Common support 5# Common support
6obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o mux.o \ 6obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
7 devices.o serial.o gpmc.o timer-gp.o 7 devices.o serial.o gpmc.o timer-gp.o
8 8
9# Power Management 9# Power Management
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a921efd43a7..b76c9fc1b8e 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -122,7 +122,7 @@ u32 omap2_get_dpll_rate(struct clk *clk)
122 if (dd->div2_reg) { 122 if (dd->div2_reg) {
123 dpll = __raw_readl(dd->div2_reg); 123 dpll = __raw_readl(dd->div2_reg);
124 dpll_div = dpll & dd->div2_mask; 124 dpll_div = dpll & dd->div2_mask;
125 dpll_div >>= __fss(dd->div2_mask); 125 dpll_div >>= __ffs(dd->div2_mask);
126 do_div(dpll_clk, dpll_div + 1); 126 do_div(dpll_clk, dpll_div + 1);
127 } 127 }
128 128
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 5c24781f6d9..c3ccac1b721 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -15,6 +15,8 @@
15 * it under the terms of the GNU General Public License version 2 as 15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation. 16 * published by the Free Software Foundation.
17 */ 17 */
18#undef DEBUG
19
18#include <linux/module.h> 20#include <linux/module.h>
19#include <linux/kernel.h> 21#include <linux/kernel.h>
20#include <linux/device.h> 22#include <linux/device.h>
@@ -23,29 +25,64 @@
23#include <linux/delay.h> 25#include <linux/delay.h>
24#include <linux/clk.h> 26#include <linux/clk.h>
25 27
26#include <asm/io.h> 28#include <linux/io.h>
29#include <linux/cpufreq.h>
27 30
28#include <asm/arch/clock.h> 31#include <asm/arch/clock.h>
29#include <asm/arch/sram.h> 32#include <asm/arch/sram.h>
30#include <asm/div64.h> 33#include <asm/div64.h>
34#include <asm/bitops.h>
31 35
32#include "prcm-regs.h"
33#include "memory.h" 36#include "memory.h"
37#include "clock.h"
34#include "clock24xx.h" 38#include "clock24xx.h"
39#include "prm.h"
40#include "prm-regbits-24xx.h"
41#include "cm.h"
42#include "cm-regbits-24xx.h"
35 43
36#undef DEBUG 44/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
45#define EN_APLL_STOPPED 0
46#define EN_APLL_LOCKED 3
37 47
38//#define DOWN_VARIABLE_DPLL 1 /* Experimental */ 48/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
49#define APLLS_CLKIN_19_2MHZ 0
50#define APLLS_CLKIN_13MHZ 2
51#define APLLS_CLKIN_12MHZ 3
52
53/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
39 54
40static struct prcm_config *curr_prcm_set; 55static struct prcm_config *curr_prcm_set;
41static u32 curr_perf_level = PRCM_FULL_SPEED;
42static struct clk *vclk; 56static struct clk *vclk;
43static struct clk *sclk; 57static struct clk *sclk;
44 58
45/*------------------------------------------------------------------------- 59/*-------------------------------------------------------------------------
46 * Omap2 specific clock functions 60 * Omap24xx specific clock functions
47 *-------------------------------------------------------------------------*/ 61 *-------------------------------------------------------------------------*/
48 62
63static int omap2_enable_osc_ck(struct clk *clk)
64{
65 u32 pcc;
66
67 pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
68
69 __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
70 OMAP24XX_PRCM_CLKSRC_CTRL);
71
72 return 0;
73}
74
75static void omap2_disable_osc_ck(struct clk *clk)
76{
77 u32 pcc;
78
79 pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
80
81 __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
82 OMAP24XX_PRCM_CLKSRC_CTRL);
83}
84
85#ifdef OLD_CK
49/* Recalculate SYST_CLK */ 86/* Recalculate SYST_CLK */
50static void omap2_sys_clk_recalc(struct clk * clk) 87static void omap2_sys_clk_recalc(struct clk * clk)
51{ 88{
@@ -55,17 +92,18 @@ static void omap2_sys_clk_recalc(struct clk * clk)
55 clk->rate = (clk->parent->rate / div); 92 clk->rate = (clk->parent->rate / div);
56 propagate_rate(clk); 93 propagate_rate(clk);
57} 94}
95#endif /* OLD_CK */
58 96
59static u32 omap2_get_dpll_rate(struct clk * tclk) 97/* This actually returns the rate of core_ck, not dpll_ck. */
98static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
60{ 99{
61 long long dpll_clk; 100 long long dpll_clk;
62 int dpll_mult, dpll_div, amult; 101 u8 amult;
102
103 dpll_clk = omap2_get_dpll_rate(tclk);
63 104
64 dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */ 105 amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
65 dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */ 106 amult &= OMAP24XX_CORE_CLK_SRC_MASK;
66 dpll_clk = (long long)tclk->parent->rate * dpll_mult;
67 do_div(dpll_clk, dpll_div + 1);
68 amult = CM_CLKSEL2_PLL & 0x3;
69 dpll_clk *= amult; 107 dpll_clk *= amult;
70 108
71 return dpll_clk; 109 return dpll_clk;
@@ -84,6 +122,7 @@ static void omap2_propagate_rate(struct clk * clk)
84 propagate_rate(clk); 122 propagate_rate(clk);
85} 123}
86 124
125#ifdef OLD_CK
87static void omap2_set_osc_ck(int enable) 126static void omap2_set_osc_ck(int enable)
88{ 127{
89 if (enable) 128 if (enable)
@@ -91,39 +130,40 @@ static void omap2_set_osc_ck(int enable)
91 else 130 else
92 PRCM_CLKSRC_CTRL |= 0x3 << 3; 131 PRCM_CLKSRC_CTRL |= 0x3 << 3;
93} 132}
133#endif /* OLD_CK */
94 134
95/* Enable an APLL if off */ 135/* Enable an APLL if off */
96static void omap2_clk_fixed_enable(struct clk *clk) 136static int omap2_clk_fixed_enable(struct clk *clk)
97{ 137{
98 u32 cval, i=0; 138 u32 cval, apll_mask;
99 139
100 if (clk->enable_bit == 0xff) /* Parent will do it */ 140 apll_mask = EN_APLL_LOCKED << clk->enable_bit;
101 return;
102 141
103 cval = CM_CLKEN_PLL; 142 cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
104 143
105 if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit)) 144 if ((cval & apll_mask) == apll_mask)
106 return; 145 return 0; /* apll already enabled */
107 146
108 cval &= ~(0x3 << clk->enable_bit); 147 cval &= ~apll_mask;
109 cval |= (0x3 << clk->enable_bit); 148 cval |= apll_mask;
110 CM_CLKEN_PLL = cval; 149 cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
111 150
112 if (clk == &apll96_ck) 151 if (clk == &apll96_ck)
113 cval = (1 << 8); 152 cval = OMAP24XX_ST_96M_APLL;
114 else if (clk == &apll54_ck) 153 else if (clk == &apll54_ck)
115 cval = (1 << 6); 154 cval = OMAP24XX_ST_54M_APLL;
116 155
117 while (!(CM_IDLEST_CKGEN & cval)) { /* Wait for lock */ 156 omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
118 ++i; 157 clk->name);
119 udelay(1); 158
120 if (i == 100000) { 159 /*
121 printk(KERN_ERR "Clock %s didn't lock\n", clk->name); 160 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
122 break; 161 * fails?
123 } 162 */
124 } 163 return 0;
125} 164}
126 165
166#ifdef OLD_CK
127static void omap2_clk_wait_ready(struct clk *clk) 167static void omap2_clk_wait_ready(struct clk *clk)
128{ 168{
129 unsigned long reg, other_reg, st_reg; 169 unsigned long reg, other_reg, st_reg;
@@ -199,20 +239,19 @@ static int _omap2_clk_enable(struct clk * clk)
199 239
200 return 0; 240 return 0;
201} 241}
242#endif /* OLD_CK */
202 243
203/* Stop APLL */ 244/* Stop APLL */
204static void omap2_clk_fixed_disable(struct clk *clk) 245static void omap2_clk_fixed_disable(struct clk *clk)
205{ 246{
206 u32 cval; 247 u32 cval;
207 248
208 if(clk->enable_bit == 0xff) /* let parent off do it */ 249 cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
209 return; 250 cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
210 251 cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
211 cval = CM_CLKEN_PLL;
212 cval &= ~(0x3 << clk->enable_bit);
213 CM_CLKEN_PLL = cval;
214} 252}
215 253
254#ifdef OLD_CK
216/* Disables clock without considering parent dependencies or use count */ 255/* Disables clock without considering parent dependencies or use count */
217static void _omap2_clk_disable(struct clk *clk) 256static void _omap2_clk_disable(struct clk *clk)
218{ 257{
@@ -269,6 +308,7 @@ static void omap2_clk_disable(struct clk *clk)
269 omap2_clk_disable(clk->parent); 308 omap2_clk_disable(clk->parent);
270 } 309 }
271} 310}
311#endif /* OLD_CK */
272 312
273/* 313/*
274 * Uses the current prcm set to tell if a rate is valid. 314 * Uses the current prcm set to tell if a rate is valid.
@@ -276,9 +316,12 @@ static void omap2_clk_disable(struct clk *clk)
276 */ 316 */
277static u32 omap2_dpll_round_rate(unsigned long target_rate) 317static u32 omap2_dpll_round_rate(unsigned long target_rate)
278{ 318{
279 u32 high, low; 319 u32 high, low, core_clk_src;
280 320
281 if ((CM_CLKSEL2_PLL & 0x3) == 1) { /* DPLL clockout */ 321 core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
322 core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
323
324 if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
282 high = curr_prcm_set->dpll_speed * 2; 325 high = curr_prcm_set->dpll_speed * 2;
283 low = curr_prcm_set->dpll_speed; 326 low = curr_prcm_set->dpll_speed;
284 } else { /* DPLL clockout x 2 */ 327 } else { /* DPLL clockout x 2 */
@@ -300,6 +343,7 @@ static u32 omap2_dpll_round_rate(unsigned long target_rate)
300 343
301} 344}
302 345
346#ifdef OLD_CK
303/* 347/*
304 * Used for clocks that are part of CLKSEL_xyz governed clocks. 348 * Used for clocks that are part of CLKSEL_xyz governed clocks.
305 * REVISIT: Maybe change to use clk->enable() functions like on omap1? 349 * REVISIT: Maybe change to use clk->enable() functions like on omap1?
@@ -486,55 +530,72 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force)
486 530
487 return prev; 531 return prev;
488} 532}
533#endif /* OLD_CK */
534
535static void omap2_dpll_recalc(struct clk *clk)
536{
537 clk->rate = omap2_get_dpll_rate_24xx(clk);
538
539 propagate_rate(clk);
540}
489 541
490static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate) 542static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
491{ 543{
492 u32 flags, cur_rate, low, mult, div, valid_rate, done_rate; 544 u32 cur_rate, low, mult, div, valid_rate, done_rate;
493 u32 bypass = 0; 545 u32 bypass = 0;
494 struct prcm_config tmpset; 546 struct prcm_config tmpset;
547 const struct dpll_data *dd;
548 unsigned long flags;
495 int ret = -EINVAL; 549 int ret = -EINVAL;
496 550
497 local_irq_save(flags); 551 local_irq_save(flags);
498 cur_rate = omap2_get_dpll_rate(&dpll_ck); 552 cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
499 mult = CM_CLKSEL2_PLL & 0x3; 553 mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
554 mult &= OMAP24XX_CORE_CLK_SRC_MASK;
500 555
501 if ((rate == (cur_rate / 2)) && (mult == 2)) { 556 if ((rate == (cur_rate / 2)) && (mult == 2)) {
502 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); 557 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
503 } else if ((rate == (cur_rate * 2)) && (mult == 1)) { 558 } else if ((rate == (cur_rate * 2)) && (mult == 1)) {
504 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); 559 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
505 } else if (rate != cur_rate) { 560 } else if (rate != cur_rate) {
506 valid_rate = omap2_dpll_round_rate(rate); 561 valid_rate = omap2_dpll_round_rate(rate);
507 if (valid_rate != rate) 562 if (valid_rate != rate)
508 goto dpll_exit; 563 goto dpll_exit;
509 564
510 if ((CM_CLKSEL2_PLL & 0x3) == 1) 565 if (mult == 1)
511 low = curr_prcm_set->dpll_speed; 566 low = curr_prcm_set->dpll_speed;
512 else 567 else
513 low = curr_prcm_set->dpll_speed / 2; 568 low = curr_prcm_set->dpll_speed / 2;
514 569
515 tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL; 570 dd = clk->dpll_data;
516 tmpset.cm_clksel1_pll &= ~(0x3FFF << 8); 571 if (!dd)
572 goto dpll_exit;
573
574 tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
575 tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
576 dd->div1_mask);
517 div = ((curr_prcm_set->xtal_speed / 1000000) - 1); 577 div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
518 tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL; 578 tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
519 tmpset.cm_clksel2_pll &= ~0x3; 579 tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
520 if (rate > low) { 580 if (rate > low) {
521 tmpset.cm_clksel2_pll |= 0x2; 581 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
522 mult = ((rate / 2) / 1000000); 582 mult = ((rate / 2) / 1000000);
523 done_rate = PRCM_FULL_SPEED; 583 done_rate = CORE_CLK_SRC_DPLL_X2;
524 } else { 584 } else {
525 tmpset.cm_clksel2_pll |= 0x1; 585 tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
526 mult = (rate / 1000000); 586 mult = (rate / 1000000);
527 done_rate = PRCM_HALF_SPEED; 587 done_rate = CORE_CLK_SRC_DPLL;
528 } 588 }
529 tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12)); 589 tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
590 tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
530 591
531 /* Worst case */ 592 /* Worst case */
532 tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS; 593 tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
533 594
534 if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ 595 if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */
535 bypass = 1; 596 bypass = 1;
536 597
537 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */ 598 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
538 599
539 /* Force dll lock mode */ 600 /* Force dll lock mode */
540 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, 601 omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
@@ -544,7 +605,7 @@ static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
544 omap2_init_memory_params(omap2_dll_force_needed()); 605 omap2_init_memory_params(omap2_dll_force_needed());
545 omap2_reprogram_sdrc(done_rate, 0); 606 omap2_reprogram_sdrc(done_rate, 0);
546 } 607 }
547 omap2_clksel_recalc(&dpll_ck); 608 omap2_dpll_recalc(&dpll_ck);
548 ret = 0; 609 ret = 0;
549 610
550dpll_exit: 611dpll_exit:
@@ -552,8 +613,13 @@ dpll_exit:
552 return(ret); 613 return(ret);
553} 614}
554 615
555/* Just return the MPU speed */ 616/**
556static void omap2_mpu_recalc(struct clk * clk) 617 * omap2_table_mpu_recalc - just return the MPU speed
618 * @clk: virt_prcm_set struct clk
619 *
620 * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
621 */
622static void omap2_table_mpu_recalc(struct clk *clk)
557{ 623{
558 clk->rate = curr_prcm_set->mpu_speed; 624 clk->rate = curr_prcm_set->mpu_speed;
559} 625}
@@ -565,9 +631,9 @@ static void omap2_mpu_recalc(struct clk * clk)
565 * Some might argue L3-DDR, others ARM, others IVA. This code is simple and 631 * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
566 * just uses the ARM rates. 632 * just uses the ARM rates.
567 */ 633 */
568static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate) 634static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
569{ 635{
570 struct prcm_config * ptr; 636 struct prcm_config *ptr;
571 long highest_rate; 637 long highest_rate;
572 638
573 if (clk != &virt_prcm_set) 639 if (clk != &virt_prcm_set)
@@ -576,6 +642,8 @@ static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
576 highest_rate = -EINVAL; 642 highest_rate = -EINVAL;
577 643
578 for (ptr = rate_table; ptr->mpu_speed; ptr++) { 644 for (ptr = rate_table; ptr->mpu_speed; ptr++) {
645 if (!(ptr->flags & cpu_mask))
646 continue;
579 if (ptr->xtal_speed != sys_ck.rate) 647 if (ptr->xtal_speed != sys_ck.rate)
580 continue; 648 continue;
581 649
@@ -588,6 +656,7 @@ static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
588 return highest_rate; 656 return highest_rate;
589} 657}
590 658
659#ifdef OLD_CK
591/* 660/*
592 * omap2_convert_field_to_div() - turn field value into integer divider 661 * omap2_convert_field_to_div() - turn field value into integer divider
593 */ 662 */
@@ -938,24 +1007,19 @@ static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
938 set_parent_error: 1007 set_parent_error:
939 return ret; 1008 return ret;
940} 1009}
1010#endif /* OLD_CK */
941 1011
942/* Sets basic clocks based on the specified rate */ 1012/* Sets basic clocks based on the specified rate */
943static int omap2_select_table_rate(struct clk * clk, unsigned long rate) 1013static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
944{ 1014{
945 u32 flags, cur_rate, done_rate, bypass = 0; 1015 u32 cur_rate, done_rate, bypass = 0, tmp;
946 u8 cpu_mask = 0;
947 struct prcm_config *prcm; 1016 struct prcm_config *prcm;
948 unsigned long found_speed = 0; 1017 unsigned long found_speed = 0;
1018 unsigned long flags;
949 1019
950 if (clk != &virt_prcm_set) 1020 if (clk != &virt_prcm_set)
951 return -EINVAL; 1021 return -EINVAL;
952 1022
953 /* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
954 if (cpu_is_omap2420())
955 cpu_mask = RATE_IN_242X;
956 else if (cpu_is_omap2430())
957 cpu_mask = RATE_IN_243X;
958
959 for (prcm = rate_table; prcm->mpu_speed; prcm++) { 1023 for (prcm = rate_table; prcm->mpu_speed; prcm++) {
960 if (!(prcm->flags & cpu_mask)) 1024 if (!(prcm->flags & cpu_mask))
961 continue; 1025 continue;
@@ -976,38 +1040,42 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
976 } 1040 }
977 1041
978 curr_prcm_set = prcm; 1042 curr_prcm_set = prcm;
979 cur_rate = omap2_get_dpll_rate(&dpll_ck); 1043 cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
980 1044
981 if (prcm->dpll_speed == cur_rate / 2) { 1045 if (prcm->dpll_speed == cur_rate / 2) {
982 omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1); 1046 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
983 } else if (prcm->dpll_speed == cur_rate * 2) { 1047 } else if (prcm->dpll_speed == cur_rate * 2) {
984 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); 1048 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
985 } else if (prcm->dpll_speed != cur_rate) { 1049 } else if (prcm->dpll_speed != cur_rate) {
986 local_irq_save(flags); 1050 local_irq_save(flags);
987 1051
988 if (prcm->dpll_speed == prcm->xtal_speed) 1052 if (prcm->dpll_speed == prcm->xtal_speed)
989 bypass = 1; 1053 bypass = 1;
990 1054
991 if ((prcm->cm_clksel2_pll & 0x3) == 2) 1055 if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
992 done_rate = PRCM_FULL_SPEED; 1056 CORE_CLK_SRC_DPLL_X2)
1057 done_rate = CORE_CLK_SRC_DPLL_X2;
993 else 1058 else
994 done_rate = PRCM_HALF_SPEED; 1059 done_rate = CORE_CLK_SRC_DPLL;
995 1060
996 /* MPU divider */ 1061 /* MPU divider */
997 CM_CLKSEL_MPU = prcm->cm_clksel_mpu; 1062 cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
998 1063
999 /* dsp + iva1 div(2420), iva2.1(2430) */ 1064 /* dsp + iva1 div(2420), iva2.1(2430) */
1000 CM_CLKSEL_DSP = prcm->cm_clksel_dsp; 1065 cm_write_mod_reg(prcm->cm_clksel_dsp,
1066 OMAP24XX_DSP_MOD, CM_CLKSEL);
1001 1067
1002 CM_CLKSEL_GFX = prcm->cm_clksel_gfx; 1068 cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
1003 1069
1004 /* Major subsystem dividers */ 1070 /* Major subsystem dividers */
1005 CM_CLKSEL1_CORE = prcm->cm_clksel1_core; 1071 tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
1072 cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
1006 if (cpu_is_omap2430()) 1073 if (cpu_is_omap2430())
1007 CM_CLKSEL_MDM = prcm->cm_clksel_mdm; 1074 cm_write_mod_reg(prcm->cm_clksel_mdm,
1075 OMAP2430_MDM_MOD, CM_CLKSEL);
1008 1076
1009 /* x2 to enter init_mem */ 1077 /* x2 to enter init_mem */
1010 omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); 1078 omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
1011 1079
1012 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, 1080 omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
1013 bypass); 1081 bypass);
@@ -1017,7 +1085,7 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
1017 1085
1018 local_irq_restore(flags); 1086 local_irq_restore(flags);
1019 } 1087 }
1020 omap2_clksel_recalc(&dpll_ck); 1088 omap2_dpll_recalc(&dpll_ck);
1021 1089
1022 return 0; 1090 return 0;
1023} 1091}
@@ -1051,27 +1119,45 @@ static struct clk_functions omap2_clk_functions = {
1051 .clk_disable_unused = omap2_clk_disable_unused, 1119 .clk_disable_unused = omap2_clk_disable_unused,
1052}; 1120};
1053 1121
1054static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys) 1122static u32 omap2_get_apll_clkin(void)
1055{ 1123{
1056 u32 div, aplls, sclk = 13000000; 1124 u32 aplls, sclk = 0;
1057 1125
1058 aplls = CM_CLKSEL1_PLL; 1126 aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
1059 aplls &= ((1 << 23) | (1 << 24) | (1 << 25)); 1127 aplls &= OMAP24XX_APLLS_CLKIN_MASK;
1060 aplls >>= 23; /* Isolate field, 0,2,3 */ 1128 aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
1061 1129
1062 if (aplls == 0) 1130 if (aplls == APLLS_CLKIN_19_2MHZ)
1063 sclk = 19200000; 1131 sclk = 19200000;
1064 else if (aplls == 2) 1132 else if (aplls == APLLS_CLKIN_13MHZ)
1065 sclk = 13000000; 1133 sclk = 13000000;
1066 else if (aplls == 3) 1134 else if (aplls == APLLS_CLKIN_12MHZ)
1067 sclk = 12000000; 1135 sclk = 12000000;
1068 1136
1069 div = PRCM_CLKSRC_CTRL; 1137 return sclk;
1070 div &= ((1 << 7) | (1 << 6)); 1138}
1071 div >>= sys->rate_offset; 1139
1140static u32 omap2_get_sysclkdiv(void)
1141{
1142 u32 div;
1143
1144 div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
1145 div &= OMAP_SYSCLKDIV_MASK;
1146 div >>= OMAP_SYSCLKDIV_SHIFT;
1072 1147
1073 osc->rate = sclk * div; 1148 return div;
1074 sys->rate = sclk; 1149}
1150
1151static void omap2_osc_clk_recalc(struct clk *clk)
1152{
1153 clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
1154 propagate_rate(clk);
1155}
1156
1157static void omap2_sys_clk_recalc(struct clk *clk)
1158{
1159 clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
1160 propagate_rate(clk);
1075} 1161}
1076 1162
1077/* 1163/*
@@ -1100,8 +1186,7 @@ static int __init omap2_clk_arch_init(void)
1100 if (omap2_select_table_rate(&virt_prcm_set, mpurate)) 1186 if (omap2_select_table_rate(&virt_prcm_set, mpurate))
1101 printk(KERN_ERR "Could not find matching MPU rate\n"); 1187 printk(KERN_ERR "Could not find matching MPU rate\n");
1102 1188
1103 propagate_rate(&osc_ck); /* update main root fast */ 1189 recalculate_root_clocks();
1104 propagate_rate(&func_32k_ck); /* update main root slow */
1105 1190
1106 printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " 1191 printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
1107 "%ld.%01ld/%ld/%ld MHz\n", 1192 "%ld.%01ld/%ld/%ld MHz\n",
@@ -1115,13 +1200,21 @@ arch_initcall(omap2_clk_arch_init);
1115int __init omap2_clk_init(void) 1200int __init omap2_clk_init(void)
1116{ 1201{
1117 struct prcm_config *prcm; 1202 struct prcm_config *prcm;
1118 struct clk ** clkp; 1203 struct clk **clkp;
1119 u32 clkrate; 1204 u32 clkrate;
1120 1205
1206 if (cpu_is_omap242x())
1207 cpu_mask = RATE_IN_242X;
1208 else if (cpu_is_omap2430())
1209 cpu_mask = RATE_IN_243X;
1210
1121 clk_init(&omap2_clk_functions); 1211 clk_init(&omap2_clk_functions);
1122 omap2_get_crystal_rate(&osc_ck, &sys_ck);
1123 1212
1124 for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks); 1213 omap2_osc_clk_recalc(&osc_ck);
1214 omap2_sys_clk_recalc(&sys_ck);
1215
1216 for (clkp = onchip_24xx_clks;
1217 clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
1125 clkp++) { 1218 clkp++) {
1126 1219
1127 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) { 1220 if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
@@ -1136,8 +1229,10 @@ int __init omap2_clk_init(void)
1136 } 1229 }
1137 1230
1138 /* Check the MPU rate set by bootloader */ 1231 /* Check the MPU rate set by bootloader */
1139 clkrate = omap2_get_dpll_rate(&dpll_ck); 1232 clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
1140 for (prcm = rate_table; prcm->mpu_speed; prcm++) { 1233 for (prcm = rate_table; prcm->mpu_speed; prcm++) {
1234 if (!(prcm->flags & cpu_mask))
1235 continue;
1141 if (prcm->xtal_speed != sys_ck.rate) 1236 if (prcm->xtal_speed != sys_ck.rate)
1142 continue; 1237 continue;
1143 if (prcm->dpll_speed <= clkrate) 1238 if (prcm->dpll_speed <= clkrate)
@@ -1145,8 +1240,7 @@ int __init omap2_clk_init(void)
1145 } 1240 }
1146 curr_prcm_set = prcm; 1241 curr_prcm_set = prcm;
1147 1242
1148 propagate_rate(&osc_ck); /* update main root fast */ 1243 recalculate_root_clocks();
1149 propagate_rate(&func_32k_ck); /* update main root slow */
1150 1244
1151 printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " 1245 printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
1152 "%ld.%01ld/%ld/%ld MHz\n", 1246 "%ld.%01ld/%ld/%ld MHz\n",
@@ -1157,16 +1251,7 @@ int __init omap2_clk_init(void)
1157 * Only enable those clocks we will need, let the drivers 1251 * Only enable those clocks we will need, let the drivers
1158 * enable other clocks as necessary 1252 * enable other clocks as necessary
1159 */ 1253 */
1160 clk_enable(&sync_32k_ick); 1254 clk_enable_init_clocks();
1161 clk_enable(&omapctrl_ick);
1162
1163 /* Force the APLLs always active. The clocks are idled
1164 * automatically by hardware. */
1165 clk_enable(&apll96_ck);
1166 clk_enable(&apll54_ck);
1167
1168 if (cpu_is_omap2430())
1169 clk_enable(&sdrc_ick);
1170 1255
1171 /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ 1256 /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
1172 vclk = clk_get(NULL, "virt_prcm_set"); 1257 vclk = clk_get(NULL, "virt_prcm_set");
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 4f791866b91..9363c207f58 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -14,24 +14,29 @@
14 * published by the Free Software Foundation. 14 * published by the Free Software Foundation.
15 */ 15 */
16 16
17#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H 17#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
18#define __ARCH_ARM_MACH_OMAP2_CLOCK_H 18#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
19 19
20static void omap2_sys_clk_recalc(struct clk * clk); 20#include "clock.h"
21static void omap2_clksel_recalc(struct clk * clk); 21
22static void omap2_followparent_recalc(struct clk * clk); 22#include "prm.h"
23static void omap2_propagate_rate(struct clk * clk); 23#include "cm.h"
24static void omap2_mpu_recalc(struct clk * clk); 24#include "prm-regbits-24xx.h"
25#include "cm-regbits-24xx.h"
26#include "sdrc.h"
27
28static void omap2_table_mpu_recalc(struct clk * clk);
25static int omap2_select_table_rate(struct clk * clk, unsigned long rate); 29static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
26static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate); 30static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
27static void omap2_clk_disable(struct clk *clk);
28static void omap2_sys_clk_recalc(struct clk * clk); 31static void omap2_sys_clk_recalc(struct clk * clk);
29static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val); 32static void omap2_osc_clk_recalc(struct clk * clk);
30static u32 omap2_clksel_get_divisor(struct clk *clk); 33static void omap2_sys_clk_recalc(struct clk * clk);
31 34static void omap2_dpll_recalc(struct clk * clk);
32 35static int omap2_clk_fixed_enable(struct clk * clk);
33#define RATE_IN_242X (1 << 0) 36static void omap2_clk_fixed_disable(struct clk * clk);
34#define RATE_IN_243X (1 << 1) 37static int omap2_enable_osc_ck(struct clk * clk);
38static void omap2_disable_osc_ck(struct clk * clk);
39static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate);
35 40
36/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. 41/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
37 * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP 42 * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
@@ -52,16 +57,6 @@ struct prcm_config {
52 unsigned char flags; 57 unsigned char flags;
53}; 58};
54 59
55/* Mask for clksel which support parent settign in set_rate */
56#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
57 CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
58
59/* Mask for clksel regs which support rate operations */
60#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
61 CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
62 CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
63 CM_SYSCLKOUT_SEL1)
64
65/* 60/*
66 * The OMAP2 processor can be run at several discrete 'PRCM configurations'. 61 * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
67 * These configurations are characterized by voltage and speed for clocks. 62 * These configurations are characterized by voltage and speed for clocks.
@@ -174,7 +169,7 @@ struct prcm_config {
174#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ 169#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
175#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ 170#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
176#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ 171#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
177#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */ 172#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */
178#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ 173#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
179#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ 174#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
180 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ 175 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
@@ -182,6 +177,27 @@ struct prcm_config {
182#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ 177#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
183#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX 178#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
184 179
180/* 2420-PRCM I 660MHz core */
181#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */
182#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */
183#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */
184#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \
185 RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
186 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
187 RI_CLKSEL_L4 | RI_CLKSEL_L3
188#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */
189#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU
190#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */
191#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */
192#define RI_SYNC_DSP (1 << 7) /* Activate sync */
193#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */
194#define RI_SYNC_IVA (0 << 13) /* Bypass sync */
195#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \
196 RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
197 RI_CLKSEL_DSP
198#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */
199#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX
200
185/* 2420-PRCM VII (boot) */ 201/* 2420-PRCM VII (boot) */
186#define RVII_CLKSEL_L3 (1 << 0) 202#define RVII_CLKSEL_L3 (1 << 0)
187#define RVII_CLKSEL_L4 (1 << 5) 203#define RVII_CLKSEL_L4 (1 << 5)
@@ -224,7 +240,6 @@ struct prcm_config {
224 240
225/* 241/*
226 * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed 242 * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
227 * #2 (ratio1) baseport-target
228 * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz 243 * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
229 */ 244 */
230#define M5A_DPLL_MULT_12 (133 << 12) 245#define M5A_DPLL_MULT_12 (133 << 12)
@@ -232,13 +247,13 @@ struct prcm_config {
232#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ 247#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
233 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ 248 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
234 MX_APLLS_CLIKIN_12 249 MX_APLLS_CLIKIN_12
235#define M5A_DPLL_MULT_13 (266 << 12) 250#define M5A_DPLL_MULT_13 (61 << 12)
236#define M5A_DPLL_DIV_13 (12 << 8) 251#define M5A_DPLL_DIV_13 (2 << 8)
237#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ 252#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
238 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ 253 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
239 MX_APLLS_CLIKIN_13 254 MX_APLLS_CLIKIN_13
240#define M5A_DPLL_MULT_19 (180 << 12) 255#define M5A_DPLL_MULT_19 (55 << 12)
241#define M5A_DPLL_DIV_19 (12 << 8) 256#define M5A_DPLL_DIV_19 (3 << 8)
242#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ 257#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
243 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ 258 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
244 MX_APLLS_CLIKIN_19_2 259 MX_APLLS_CLIKIN_19_2
@@ -260,7 +275,27 @@ struct prcm_config {
260 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ 275 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
261 MX_APLLS_CLIKIN_19_2 276 MX_APLLS_CLIKIN_19_2
262/* 277/*
263 * #4 (ratio2) 278 * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
279 */
280#define M4_DPLL_MULT_12 (133 << 12)
281#define M4_DPLL_DIV_12 (3 << 8)
282#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
283 M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
284 MX_APLLS_CLIKIN_12
285
286#define M4_DPLL_MULT_13 (399 << 12)
287#define M4_DPLL_DIV_13 (12 << 8)
288#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
289 M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
290 MX_APLLS_CLIKIN_13
291
292#define M4_DPLL_MULT_19 (145 << 12)
293#define M4_DPLL_DIV_19 (6 << 8)
294#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
295 M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
296 MX_APLLS_CLIKIN_19_2
297
298/*
264 * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz 299 * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
265 */ 300 */
266#define M3_DPLL_MULT_12 (55 << 12) 301#define M3_DPLL_MULT_12 (55 << 12)
@@ -268,16 +303,41 @@ struct prcm_config {
268#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ 303#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
269 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ 304 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
270 MX_APLLS_CLIKIN_12 305 MX_APLLS_CLIKIN_12
271#define M3_DPLL_MULT_13 (330 << 12) 306#define M3_DPLL_MULT_13 (76 << 12)
272#define M3_DPLL_DIV_13 (12 << 8) 307#define M3_DPLL_DIV_13 (2 << 8)
273#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ 308#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
274 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ 309 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
275 MX_APLLS_CLIKIN_13 310 MX_APLLS_CLIKIN_13
276#define M3_DPLL_MULT_19 (275 << 12) 311#define M3_DPLL_MULT_19 (17 << 12)
277#define M3_DPLL_DIV_19 (15 << 8) 312#define M3_DPLL_DIV_19 (0 << 8)
278#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ 313#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
279 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ 314 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
280 MX_APLLS_CLIKIN_19_2 315 MX_APLLS_CLIKIN_19_2
316
317/*
318 * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
319 */
320#define M2_DPLL_MULT_12 (55 << 12)
321#define M2_DPLL_DIV_12 (1 << 8)
322#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
323 M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
324 MX_APLLS_CLIKIN_12
325
326/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
327 * relock time issue */
328/* Core frequency changed from 330/165 to 329/164 MHz*/
329#define M2_DPLL_MULT_13 (76 << 12)
330#define M2_DPLL_DIV_13 (2 << 8)
331#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
332 M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
333 MX_APLLS_CLIKIN_13
334
335#define M2_DPLL_MULT_19 (17 << 12)
336#define M2_DPLL_DIV_19 (0 << 8)
337#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
338 M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
339 MX_APLLS_CLIKIN_19_2
340
281/* boot (boot) */ 341/* boot (boot) */
282#define MB_DPLL_MULT (1 << 12) 342#define MB_DPLL_MULT (1 << 12)
283#define MB_DPLL_DIV (0 << 8) 343#define MB_DPLL_DIV (0 << 8)
@@ -300,6 +360,13 @@ struct prcm_config {
300 * boot (boot) 360 * boot (boot)
301 */ 361 */
302 362
363/* PRCM I target DPLL = 2*330MHz = 660MHz */
364#define MI_DPLL_MULT_12 (55 << 12)
365#define MI_DPLL_DIV_12 (1 << 8)
366#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
367 MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
368 MX_APLLS_CLIKIN_12
369
303/* 370/*
304 * 2420 Equivalent - mode registers 371 * 2420 Equivalent - mode registers
305 * PRCM II , target DPLL = 2*300MHz = 600MHz 372 * PRCM II , target DPLL = 2*300MHz = 600MHz
@@ -335,28 +402,6 @@ struct prcm_config {
335#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) 402#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
336#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) 403#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
337 404
338/*
339 * These represent optimal values for common parts, it won't work for all.
340 * As long as you scale down, most parameters are still work, they just
341 * become sub-optimal. The RFR value goes in the opposite direction. If you
342 * don't adjust it down as your clock period increases the refresh interval
343 * will not be met. Setting all parameters for complete worst case may work,
344 * but may cut memory performance by 2x. Due to errata the DLLs need to be
345 * unlocked and their value needs run time calibration. A dynamic call is
346 * need for that as no single right value exists acorss production samples.
347 *
348 * Only the FULL speed values are given. Current code is such that rate
349 * changes must be made at DPLLoutx2. The actual value adjustment for low
350 * frequency operation will be handled by omap_set_performance()
351 *
352 * By having the boot loader boot up in the fastest L4 speed available likely
353 * will result in something which you can switch between.
354 */
355#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
356#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
357#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
358#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
359
360/* MPU speed defines */ 405/* MPU speed defines */
361#define S12M 12000000 406#define S12M 12000000
362#define S13M 13000000 407#define S13M 13000000
@@ -365,15 +410,21 @@ struct prcm_config {
365#define S100M 100000000 410#define S100M 100000000
366#define S133M 133000000 411#define S133M 133000000
367#define S150M 150000000 412#define S150M 150000000
413#define S164M 164000000
368#define S165M 165000000 414#define S165M 165000000
415#define S199M 199000000
369#define S200M 200000000 416#define S200M 200000000
370#define S266M 266000000 417#define S266M 266000000
371#define S300M 300000000 418#define S300M 300000000
419#define S329M 329000000
372#define S330M 330000000 420#define S330M 330000000
421#define S399M 399000000
373#define S400M 400000000 422#define S400M 400000000
374#define S532M 532000000 423#define S532M 532000000
375#define S600M 600000000 424#define S600M 600000000
425#define S658M 658000000
376#define S660M 660000000 426#define S660M 660000000
427#define S798M 798000000
377 428
378/*------------------------------------------------------------------------- 429/*-------------------------------------------------------------------------
379 * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. 430 * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
@@ -394,78 +445,93 @@ struct prcm_config {
394 * Note: This table needs to be sorted, fastest to slowest. 445 * Note: This table needs to be sorted, fastest to slowest.
395 *-------------------------------------------------------------------------*/ 446 *-------------------------------------------------------------------------*/
396static struct prcm_config rate_table[] = { 447static struct prcm_config rate_table[] = {
448 /* PRCM I - FAST */
449 {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
450 RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
451 RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
452 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
453 RATE_IN_242X},
454
397 /* PRCM II - FAST */ 455 /* PRCM II - FAST */
398 {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ 456 {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
399 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 457 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
400 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, 458 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
401 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 459 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
402 RATE_IN_242X}, 460 RATE_IN_242X},
403 461
404 {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ 462 {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
405 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 463 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
406 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, 464 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
407 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 465 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
408 RATE_IN_242X}, 466 RATE_IN_242X},
409 467
410 /* PRCM III - FAST */ 468 /* PRCM III - FAST */
411 {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ 469 {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
412 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 470 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
413 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, 471 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
414 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 472 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
415 RATE_IN_242X}, 473 RATE_IN_242X},
416 474
417 {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ 475 {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
418 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 476 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
419 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, 477 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
420 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 478 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
421 RATE_IN_242X}, 479 RATE_IN_242X},
422 480
423 /* PRCM II - SLOW */ 481 /* PRCM II - SLOW */
424 {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ 482 {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
425 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 483 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
426 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, 484 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
427 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 485 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
428 RATE_IN_242X}, 486 RATE_IN_242X},
429 487
430 {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ 488 {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
431 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, 489 RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
432 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, 490 RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
433 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz, 491 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
434 RATE_IN_242X}, 492 RATE_IN_242X},
435 493
436 /* PRCM III - SLOW */ 494 /* PRCM III - SLOW */
437 {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ 495 {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
438 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 496 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
439 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, 497 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
440 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 498 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
441 RATE_IN_242X}, 499 RATE_IN_242X},
442 500
443 {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ 501 {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
444 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, 502 RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
445 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, 503 RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
446 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz, 504 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
447 RATE_IN_242X}, 505 RATE_IN_242X},
448 506
449 /* PRCM-VII (boot-bypass) */ 507 /* PRCM-VII (boot-bypass) */
450 {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ 508 {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
451 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, 509 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
452 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, 510 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
453 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, 511 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
454 RATE_IN_242X}, 512 RATE_IN_242X},
455 513
456 /* PRCM-VII (boot-bypass) */ 514 /* PRCM-VII (boot-bypass) */
457 {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ 515 {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
458 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, 516 RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
459 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, 517 RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
460 MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS, 518 MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
461 RATE_IN_242X}, 519 RATE_IN_242X},
462 520
463 /* PRCM #3 - ratio2 (ES2) - FAST */ 521 /* PRCM #4 - ratio2 (ES2.1) - FAST */
464 {S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ 522 {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
465 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, 523 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
466 R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, 524 R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
467 MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, 525 MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
468 V24XX_SDRC_RFR_CTRL_110MHz, 526 SDRC_RFR_CTRL_133MHz,
527 RATE_IN_243X},
528
529 /* PRCM #2 - ratio1 (ES2) - FAST */
530 {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
531 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
532 R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
533 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
534 SDRC_RFR_CTRL_165MHz,
469 RATE_IN_243X}, 535 RATE_IN_243X},
470 536
471 /* PRCM #5a - ratio1 - FAST */ 537 /* PRCM #5a - ratio1 - FAST */
@@ -473,7 +539,7 @@ static struct prcm_config rate_table[] = {
473 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 539 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
474 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, 540 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
475 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, 541 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
476 V24XX_SDRC_RFR_CTRL_133MHz, 542 SDRC_RFR_CTRL_133MHz,
477 RATE_IN_243X}, 543 RATE_IN_243X},
478 544
479 /* PRCM #5b - ratio1 - FAST */ 545 /* PRCM #5b - ratio1 - FAST */
@@ -481,15 +547,23 @@ static struct prcm_config rate_table[] = {
481 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 547 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
482 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, 548 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
483 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, 549 MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
484 V24XX_SDRC_RFR_CTRL_100MHz, 550 SDRC_RFR_CTRL_100MHz,
485 RATE_IN_243X}, 551 RATE_IN_243X},
486 552
487 /* PRCM #3 - ratio2 (ES2) - SLOW */ 553 /* PRCM #4 - ratio1 (ES2.1) - SLOW */
488 {S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ 554 {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
489 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, 555 R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
490 R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL, 556 R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
491 MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, 557 MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
492 V24XX_SDRC_RFR_CTRL_110MHz, 558 SDRC_RFR_CTRL_133MHz,
559 RATE_IN_243X},
560
561 /* PRCM #2 - ratio1 (ES2) - SLOW */
562 {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
563 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
564 R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
565 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
566 SDRC_RFR_CTRL_165MHz,
493 RATE_IN_243X}, 567 RATE_IN_243X},
494 568
495 /* PRCM #5a - ratio1 - SLOW */ 569 /* PRCM #5a - ratio1 - SLOW */
@@ -497,7 +571,7 @@ static struct prcm_config rate_table[] = {
497 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 571 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
498 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, 572 R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
499 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, 573 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
500 V24XX_SDRC_RFR_CTRL_133MHz, 574 SDRC_RFR_CTRL_133MHz,
501 RATE_IN_243X}, 575 RATE_IN_243X},
502 576
503 /* PRCM #5b - ratio1 - SLOW*/ 577 /* PRCM #5b - ratio1 - SLOW*/
@@ -505,7 +579,7 @@ static struct prcm_config rate_table[] = {
505 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, 579 R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
506 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, 580 R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
507 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, 581 MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
508 V24XX_SDRC_RFR_CTRL_100MHz, 582 SDRC_RFR_CTRL_100MHz,
509 RATE_IN_243X}, 583 RATE_IN_243X},
510 584
511 /* PRCM-boot/bypass */ 585 /* PRCM-boot/bypass */
@@ -513,7 +587,7 @@ static struct prcm_config rate_table[] = {
513 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, 587 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
514 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, 588 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
515 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, 589 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
516 V24XX_SDRC_RFR_CTRL_BYPASS, 590 SDRC_RFR_CTRL_BYPASS,
517 RATE_IN_243X}, 591 RATE_IN_243X},
518 592
519 /* PRCM-boot/bypass */ 593 /* PRCM-boot/bypass */
@@ -521,7 +595,7 @@ static struct prcm_config rate_table[] = {
521 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, 595 RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
522 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, 596 RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
523 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, 597 MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
524 V24XX_SDRC_RFR_CTRL_BYPASS, 598 SDRC_RFR_CTRL_BYPASS,
525 RATE_IN_243X}, 599 RATE_IN_243X},
526 600
527 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, 601 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
@@ -547,6 +621,7 @@ static struct prcm_config rate_table[] = {
547 * clocks. 621 * clocks.
548 *-------------------------------------------------------------------------*/ 622 *-------------------------------------------------------------------------*/
549 623
624#ifdef OLD_CK
550/* Base external input clocks */ 625/* Base external input clocks */
551static struct clk func_32k_ck = { 626static struct clk func_32k_ck = {
552 .name = "func_32k_ck", 627 .name = "func_32k_ck",
@@ -554,7 +629,7 @@ static struct clk func_32k_ck = {
554 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 629 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
555 RATE_FIXED | ALWAYS_ENABLED, 630 RATE_FIXED | ALWAYS_ENABLED,
556}; 631};
557 632#endif /* OLD_CK */
558/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */ 633/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
559static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */ 634static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
560 .name = "osc_ck", 635 .name = "osc_ck",
@@ -570,10 +645,9 @@ static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
570 .rate = 13000000, 645 .rate = 13000000,
571 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 646 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
572 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, 647 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
573 .rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */
574 .recalc = &omap2_sys_clk_recalc, 648 .recalc = &omap2_sys_clk_recalc,
575}; 649};
576 650#ifdef OLD_CK
577static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */ 651static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
578 .name = "alt_ck", 652 .name = "alt_ck",
579 .rate = 54000000, 653 .rate = 54000000,
@@ -581,29 +655,43 @@ static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
581 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES, 655 RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
582 .recalc = &omap2_propagate_rate, 656 .recalc = &omap2_propagate_rate,
583}; 657};
584 658#endif /* OLD_CK */
585/* 659/*
586 * Analog domain root source clocks 660 * Analog domain root source clocks
587 */ 661 */
588 662
589/* dpll_ck, is broken out in to special cases through clksel */ 663/* dpll_ck, is broken out in to special cases through clksel */
664/* REVISIT: Rate changes on dpll_ck trigger a full set change. ...
665 * deal with this
666 */
667
668static const struct dpll_data dpll_dd = {
669 .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
670 .mult_mask = OMAP24XX_DPLL_MULT_MASK,
671 .div1_mask = OMAP24XX_DPLL_DIV_MASK,
672};
673
590static struct clk dpll_ck = { 674static struct clk dpll_ck = {
591 .name = "dpll_ck", 675 .name = "dpll_ck",
592 .parent = &sys_ck, /* Can be func_32k also */ 676 .parent = &sys_ck, /* Can be func_32k also */
677 .dpll_data = &dpll_dd,
593 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 678 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
594 RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1, 679 RATE_PROPAGATES | ALWAYS_ENABLED,
595 .recalc = &omap2_clksel_recalc, 680 .recalc = &omap2_dpll_recalc,
681 .set_rate = &omap2_reprogram_dpll,
596}; 682};
597 683
598static struct clk apll96_ck = { 684static struct clk apll96_ck = {
599 .name = "apll96_ck", 685 .name = "apll96_ck",
600 .parent = &sys_ck, 686 .parent = &sys_ck,
601 .rate = 96000000, 687 .rate = 96000000,
602 .flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X | 688 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
603 RATE_FIXED | RATE_PROPAGATES, 689 RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
604 .enable_reg = (void __iomem *)&CM_CLKEN_PLL, 690 .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
605 .enable_bit = 0x2, 691 .enable_bit = OMAP24XX_EN_96M_PLL_SHIFT,
606 .recalc = &omap2_propagate_rate, 692 .enable = &omap2_clk_fixed_enable,
693 .disable = &omap2_clk_fixed_disable,
694 .recalc = &propagate_rate,
607}; 695};
608 696
609static struct clk apll54_ck = { 697static struct clk apll54_ck = {
@@ -611,15 +699,18 @@ static struct clk apll54_ck = {
611 .parent = &sys_ck, 699 .parent = &sys_ck,
612 .rate = 54000000, 700 .rate = 54000000,
613 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 701 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
614 RATE_FIXED | RATE_PROPAGATES, 702 RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
615 .enable_reg = (void __iomem *)&CM_CLKEN_PLL, 703 .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
616 .enable_bit = 0x6, 704 .enable_bit = OMAP24XX_EN_54M_PLL_SHIFT,
617 .recalc = &omap2_propagate_rate, 705 .enable = &omap2_clk_fixed_enable,
706 .disable = &omap2_clk_fixed_disable,
707 .recalc = &propagate_rate,
618}; 708};
619 709
620/* 710/*
621 * PRCM digital base sources 711 * PRCM digital base sources
622 */ 712 */
713#ifdef OLD_CK
623static struct clk func_54m_ck = { 714static struct clk func_54m_ck = {
624 .name = "func_54m_ck", 715 .name = "func_54m_ck",
625 .parent = &apll54_ck, /* can also be alt_clk */ 716 .parent = &apll54_ck, /* can also be alt_clk */
@@ -631,15 +722,15 @@ static struct clk func_54m_ck = {
631 .enable_bit = 0xff, 722 .enable_bit = 0xff,
632 .recalc = &omap2_propagate_rate, 723 .recalc = &omap2_propagate_rate,
633}; 724};
634 725#endif /* OLD_CK */
635static struct clk core_ck = { 726static struct clk core_ck = {
636 .name = "core_ck", 727 .name = "core_ck",
637 .parent = &dpll_ck, /* can also be 32k */ 728 .parent = &dpll_ck, /* can also be 32k */
638 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 729 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
639 ALWAYS_ENABLED | RATE_PROPAGATES, 730 ALWAYS_ENABLED | RATE_PROPAGATES,
640 .recalc = &omap2_propagate_rate, 731 .recalc = &followparent_recalc,
641}; 732};
642 733#ifdef OLD_CK
643static struct clk sleep_ck = { /* sys_clk or 32k */ 734static struct clk sleep_ck = { /* sys_clk or 32k */
644 .name = "sleep_ck", 735 .name = "sleep_ck",
645 .parent = &func_32k_ck, 736 .parent = &func_32k_ck,
@@ -726,7 +817,7 @@ static struct clk emul_ck = {
726 .recalc = &omap2_propagate_rate, 817 .recalc = &omap2_propagate_rate,
727 818
728}; 819};
729 820#endif /* OLD_CK */
730/* 821/*
731 * MPU clock domain 822 * MPU clock domain
732 * Clocks: 823 * Clocks:
@@ -740,13 +831,17 @@ static struct clk emul_ck = {
740static struct clk mpu_ck = { /* Control cpu */ 831static struct clk mpu_ck = { /* Control cpu */
741 .name = "mpu_ck", 832 .name = "mpu_ck",
742 .parent = &core_ck, 833 .parent = &core_ck,
743 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL | 834 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
744 ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP | 835 ALWAYS_ENABLED | DELAYED_APP |
745 CONFIG_PARTICIPANT | RATE_PROPAGATES, 836 CONFIG_PARTICIPANT | RATE_PROPAGATES,
746 .rate_offset = 0, /* bits 0-4 */ 837 .init = &omap2_init_clksel_parent,
838 .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
839 .clksel_mask = OMAP24XX_CLKSEL_MPU_MASK,
747 .recalc = &omap2_clksel_recalc, 840 .recalc = &omap2_clksel_recalc,
841 .round_rate = &omap2_clksel_round_rate,
842 .set_rate = &omap2_clksel_set_rate
748}; 843};
749 844#ifdef OLD_CK
750/* 845/*
751 * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain 846 * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
752 * Clocks: 847 * Clocks:
@@ -1933,7 +2028,7 @@ static struct clk mmchsdb2_fck = {
1933 .enable_bit = 17, 2028 .enable_bit = 17,
1934 .recalc = &omap2_followparent_recalc, 2029 .recalc = &omap2_followparent_recalc,
1935}; 2030};
1936 2031#endif /* OLD_CK */
1937/* 2032/*
1938 * This clock is a composite clock which does entire set changes then 2033 * This clock is a composite clock which does entire set changes then
1939 * forces a rebalance. It keys on the MPU speed, but it really could 2034 * forces a rebalance. It keys on the MPU speed, but it really could
@@ -1953,11 +2048,10 @@ static struct clk virt_prcm_set = {
1953 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | 2048 .flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
1954 VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP, 2049 VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
1955 .parent = &mpu_ck, /* Indexed by mpu speed, no parent */ 2050 .parent = &mpu_ck, /* Indexed by mpu speed, no parent */
1956 .recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */
1957 .set_rate = &omap2_select_table_rate, 2051 .set_rate = &omap2_select_table_rate,
1958 .round_rate = &omap2_round_to_table_rate, 2052 .round_rate = &omap2_round_to_table_rate,
1959}; 2053};
1960 2054#ifdef OLD_CK
1961static struct clk *onchip_clks[] = { 2055static struct clk *onchip_clks[] = {
1962 /* external root sources */ 2056 /* external root sources */
1963 &func_32k_ck, 2057 &func_32k_ck,
@@ -2107,5 +2201,17 @@ static struct clk *onchip_clks[] = {
2107 &mmchsdb1_fck, 2201 &mmchsdb1_fck,
2108 &mmchsdb2_fck, 2202 &mmchsdb2_fck,
2109}; 2203};
2204#endif /* OLD_CK */
2205
2206static struct clk *onchip_24xx_clks[] __initdata = {
2207 /* external root sources */
2208 &osc_ck,
2209 &sys_ck,
2210 /* internal analog sources */
2211 &dpll_ck,
2212 &apll96_ck,
2213 &apll54_ck,
2214};
2110 2215
2111#endif 2216#endif
2217
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index b56c1a082d9..12479081881 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -53,6 +53,54 @@ u32 omap2_memory_get_type(void)
53 return mem_timings.m_type; 53 return mem_timings.m_type;
54} 54}
55 55
56/*
57 * Check the DLL lock state, and return tue if running in unlock mode.
58 * This is needed to compensate for the shifted DLL value in unlock mode.
59 */
60u32 omap2_dll_force_needed(void)
61{
62 /* dlla and dllb are a set */
63 u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
64
65 if ((dll_state & (1 << 2)) == (1 << 2))
66 return 1;
67 else
68 return 0;
69}
70
71/*
72 * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
73 * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
74 * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
75 */
76u32 omap2_reprogram_sdrc(u32 level, u32 force)
77{
78 u32 dll_ctrl, m_type;
79 u32 prev = curr_perf_level;
80 unsigned long flags;
81
82 if ((curr_perf_level == level) && !force)
83 return prev;
84
85 if (level == CORE_CLK_SRC_DPLL) {
86 dll_ctrl = omap2_memory_get_slow_dll_ctrl();
87 } else if (level == CORE_CLK_SRC_DPLL_X2) {
88 dll_ctrl = omap2_memory_get_fast_dll_ctrl();
89 } else {
90 return prev;
91 }
92
93 m_type = omap2_memory_get_type();
94
95 local_irq_save(flags);
96 __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
97 omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
98 curr_perf_level = level;
99 local_irq_restore(flags);
100
101 return prev;
102}
103
56void omap2_init_memory_params(u32 force_lock_to_unlock_mode) 104void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
57{ 105{
58 unsigned long dll_cnt; 106 unsigned long dll_cnt;
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index d212eea83a0..9a280b50a89 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -32,3 +32,5 @@ extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
32extern u32 omap2_memory_get_slow_dll_ctrl(void); 32extern u32 omap2_memory_get_slow_dll_ctrl(void);
33extern u32 omap2_memory_get_fast_dll_ctrl(void); 33extern u32 omap2_memory_get_fast_dll_ctrl(void);
34extern u32 omap2_memory_get_type(void); 34extern u32 omap2_memory_get_type(void);
35u32 omap2_dll_force_needed(void);
36u32 omap2_reprogram_sdrc(u32 level, u32 force);
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-11 21:04:37 -0500