OMAP2/3 board-*.c files: read bootloader configuration earlier

Most board-*.c files read configuration data from the bootloader in
their .init_machine() function.  This needs to happen earlier, at some
point before omap2_init_common_hw() is called.  This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 10 insertions, 10 deletions

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index b6501d241c1..eaa02d012c5 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -268,14 +268,6 @@ static void __init h4_init_flash(void)
         h4_flash_resource.end   = base + SZ_64M - 1;
 }
 
-static void __init omap_h4_init_irq(void)
-{
-        omap2_init_common_hw(NULL, NULL);
-        omap_init_irq();
-        omap_gpio_init();
-        h4_init_flash();
-}
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
         .ctrl_name      = "internal",
 };
@@ -317,6 +309,16 @@ static struct omap_board_config_kernel h4_config[] = {
         { OMAP_TAG_LCD,         &h4_lcd_config },
 };
 
+static void __init omap_h4_init_irq(void)
+{
+        omap_board_config = h4_config;
+        omap_board_config_size = ARRAY_SIZE(h4_config);
+        omap2_init_common_hw(NULL, NULL);
+        omap_init_irq();
+        omap_gpio_init();
+        h4_init_flash();
+}
+
 static struct at24_platform_data m24c01 = {
         .byte_len       = SZ_1K / 8,
         .page_size      = 16,
@@ -361,8 +363,6 @@ static void __init omap_h4_init(void)
                         ARRAY_SIZE(h4_i2c_board_info));
 
         platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-        omap_board_config = h4_config;
-        omap_board_config_size = ARRAY_SIZE(h4_config);
         omap_usb_init(&h4_usb_config);
         omap_serial_init();
 }