[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx

Patch from Tony Lindgren

This patch adds support for omap24xx series of processors.
The files live in arch/arm/mach-omap2, and share common
files with omap15xx and omap16xx processors in
arch/arm/plat-omap.

Omap24xx support was originally added for 2.6.9 by TI.
This code was then improved and integrated to share common
code with omap15xx and omap16xx processors by various
omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak,
Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah
et al.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 197 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
new file mode 100644
index 00000000000..f2554469a76
--- /dev/null
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-h4.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *
+ * Modified from mach-omap/omap1/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/prcm.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+static struct mtd_partition h4_partitions[] = {
+        /* bootloader (U-Boot, etc) in first sector */
+        {
+              .name             = "bootloader",
+              .offset           = 0,
+              .size             = SZ_128K,
+              .mask_flags       = MTD_WRITEABLE, /* force read-only */
+        },
+        /* bootloader params in the next sector */
+        {
+              .name             = "params",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = SZ_128K,
+              .mask_flags       = 0,
+        },
+        /* kernel */
+        {
+              .name             = "kernel",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = SZ_2M,
+              .mask_flags       = 0
+        },
+        /* file system */
+        {
+              .name             = "filesystem",
+              .offset           = MTDPART_OFS_APPEND,
+              .size             = MTDPART_SIZ_FULL,
+              .mask_flags       = 0
+        }
+};
+
+static struct flash_platform_data h4_flash_data = {
+        .map_name       = "cfi_probe",
+        .width          = 2,
+        .parts          = h4_partitions,
+        .nr_parts       = ARRAY_SIZE(h4_partitions),
+};
+
+static struct resource h4_flash_resource = {
+        .start          = H4_CS0_BASE,
+        .end            = H4_CS0_BASE + SZ_64M - 1,
+        .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device h4_flash_device = {
+        .name           = "omapflash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &h4_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &h4_flash_resource,
+};
+
+static struct resource h4_smc91x_resources[] = {
+        [0] = {
+                .start  = OMAP24XX_ETHR_START,          /* Physical */
+                .end    = OMAP24XX_ETHR_START + 0xf,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+                .end    = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device h4_smc91x_device = {
+        .name           = "smc91x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(h4_smc91x_resources),
+        .resource       = h4_smc91x_resources,
+};
+
+static struct platform_device *h4_devices[] __initdata = {
+        &h4_smc91x_device,
+        &h4_flash_device,
+};
+
+static inline void __init h4_init_smc91x(void)
+{
+        /* Make sure CS1 timings are correct */
+        GPMC_CONFIG1_1 = 0x00011200;
+        GPMC_CONFIG2_1 = 0x001f1f01;
+        GPMC_CONFIG3_1 = 0x00080803;
+        GPMC_CONFIG4_1 = 0x1c091c09;
+        GPMC_CONFIG5_1 = 0x041f1f1f;
+        GPMC_CONFIG6_1 = 0x000004c4;
+        GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+        udelay(100);
+
+        omap_cfg_reg(M15_24XX_GPIO92);
+        if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+                printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+                        OMAP24XX_ETHR_GPIO_IRQ);
+                return;
+        }
+        omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_h4_init_irq(void)
+{
+        omap_init_irq();
+        omap_gpio_init();
+        h4_init_smc91x();
+}
+
+static struct omap_uart_config h4_uart_config __initdata = {
+        .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_mmc_config h4_mmc_config __initdata = {
+        .mmc [0] = {
+                .enabled        = 1,
+                .wire4          = 1,
+                .wp_pin         = -1,
+                .power_pin      = -1,
+                .switch_pin     = -1,
+        },
+};
+
+static struct omap_lcd_config h4_lcd_config __initdata = {
+        .panel_name     = "h4",
+        .ctrl_name      = "internal",
+};
+
+static struct omap_board_config_kernel h4_config[] = {
+        { OMAP_TAG_UART,        &h4_uart_config },
+        { OMAP_TAG_MMC,         &h4_mmc_config },
+        { OMAP_TAG_LCD,         &h4_lcd_config },
+};
+
+static void __init omap_h4_init(void)
+{
+        /*
+         * Make sure the serial ports are muxed on at this point.
+         * You have to mux them off in device drivers later on
+         * if not needed.
+         */
+        platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
+        omap_board_config = h4_config;
+        omap_board_config_size = ARRAY_SIZE(h4_config);
+        omap_serial_init();
+}
+
+static void __init omap_h4_map_io(void)
+{
+        omap_map_common_io();
+}
+
+MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
+        /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+        .phys_ram       = 0x80000000,
+        .phys_io        = 0x48000000,
+        .io_pg_offst    = ((0xd8000000) >> 18) & 0xfffc,
+        .boot_params    = 0x80000100,
+        .map_io         = omap_h4_map_io,
+        .init_irq       = omap_h4_init_irq,
+        .init_machine   = omap_h4_init,
+        .timer          = &omap_timer,
+MACHINE_END