ARM: OMAP: Split omap_cfg_reg() into omap processor specific functions

Use omap processor specific function depending on system type.
Based on an earlier patch by Klaus Pedersen <klaus.k.pedersen@nokia.com>.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 103 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index d74f6798d08..cf3bdc00cfd 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -314,7 +314,110 @@ MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
 
 int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 {
+        static DEFINE_SPINLOCK(mux_spin_lock);
+        unsigned long flags;
+        unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+                pull_orig = 0, pull = 0;
+        unsigned int mask, warn = 0;
+
+        /* Check the mux register in question */
+        if (cfg->mux_reg) {
+                unsigned        tmp1, tmp2;
+
+                spin_lock_irqsave(&mux_spin_lock, flags);
+                reg_orig = omap_readl(cfg->mux_reg);
+
+                /* The mux registers always seem to be 3 bits long */
+                mask = (0x7 << cfg->mask_offset);
+                tmp1 = reg_orig & mask;
+                reg = reg_orig & ~mask;
+
+                tmp2 = (cfg->mask << cfg->mask_offset);
+                reg |= tmp2;
+
+                if (tmp1 != tmp2)
+                        warn = 1;
+
+                omap_writel(reg, cfg->mux_reg);
+                spin_unlock_irqrestore(&mux_spin_lock, flags);
+        }
+
+        /* Check for pull up or pull down selection on 1610 */
+        if (!cpu_is_omap15xx()) {
+                if (cfg->pu_pd_reg && cfg->pull_val) {
+                        spin_lock_irqsave(&mux_spin_lock, flags);
+                        pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+                        mask = 1 << cfg->pull_bit;
+
+                        if (cfg->pu_pd_val) {
+                                if (!(pu_pd_orig & mask))
+                                        warn = 1;
+                                /* Use pull up */
+                                pu_pd = pu_pd_orig | mask;
+                        } else {
+                                if (pu_pd_orig & mask)
+                                        warn = 1;
+                                /* Use pull down */
+                                pu_pd = pu_pd_orig & ~mask;
+                        }
+                        omap_writel(pu_pd, cfg->pu_pd_reg);
+                        spin_unlock_irqrestore(&mux_spin_lock, flags);
+                }
+        }
+
+        /* Check for an associated pull down register */
+        if (cfg->pull_reg) {
+                spin_lock_irqsave(&mux_spin_lock, flags);
+                pull_orig = omap_readl(cfg->pull_reg);
+                mask = 1 << cfg->pull_bit;
+
+                if (cfg->pull_val) {
+                        if (pull_orig & mask)
+                                warn = 1;
+                        /* Low bit = pull enabled */
+                        pull = pull_orig & ~mask;
+                } else {
+                        if (!(pull_orig & mask))
+                                warn = 1;
+                        /* High bit = pull disabled */
+                        pull = pull_orig | mask;
+                }
+
+                omap_writel(pull, cfg->pull_reg);
+                spin_unlock_irqrestore(&mux_spin_lock, flags);
+        }
+
+        if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+                printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+        }
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+        if (cfg->debug || warn) {
+                printk("MUX: Setting register %s\n", cfg->name);
+                printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+                       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+                if (!cpu_is_omap15xx()) {
+                        if (cfg->pu_pd_reg && cfg->pull_val) {
+                                printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+                                       cfg->pu_pd_name, cfg->pu_pd_reg,
+                                       pu_pd_orig, pu_pd);
+                        }
+                }
+
+                if (cfg->pull_reg)
+                        printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+                               cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+        }
+#endif
+
+#ifdef CONFIG_OMAP_MUX_ERRORS
+        return warn ? -ETXTBSY : 0;
+#else
         return 0;
+#endif
 }
 
 int __init omap1_mux_init(void)