DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs

For best performance, codecs often setup linked triggered
transfers with a contiguous block of params, and that is when
this API is used. Setup/configuration of these parameter RAMs
is most efficient if they are contiguous.
There is an API to allocate a set of contiguous parameter RAMs and
a corresponding API to free a set of contiguous parameter RAMs

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

1 files changed, 137 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index e6d7e6aca33..f2e57d27295 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -509,6 +509,45 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
         return IRQ_HANDLED;
 }
 
+static int reserve_contiguous_params(int ctlr, unsigned int id,
+                                     unsigned int num_params,
+                                     unsigned int start_param)
+{
+        int i, j;
+        unsigned int count = num_params;
+
+        for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+                j = EDMA_CHAN_SLOT(i);
+                if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+                        count--;
+                        if (count == 0)
+                                break;
+                else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
+                        break;
+                else
+                        count = num_params;
+        }
+
+        /*
+         * We have to clear any bits that we set
+         * if we run out parameter RAMs, i.e we do find a set
+         * of contiguous parameter RAMs but do not find the exact number
+         * requested as we may reach the total number of parameter RAMs
+         */
+        if (count) {
+                for (j = i - num_params + count + 1; j <= i ; ++j)
+                        clear_bit(j, edma_info[ctlr]->edma_inuse);
+
+                return -EBUSY;
+        }
+
+        for (j = i - num_params + 1; j <= i; ++j)
+                memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
+                        &dummy_paramset, PARM_SIZE);
+
+        return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+}
+
 /*-----------------------------------------------------------------------*/
 
 /* Resource alloc/free:  dma channels, parameter RAM slots */
@@ -700,6 +739,104 @@ void edma_free_slot(unsigned slot)
 }
 EXPORT_SYMBOL(edma_free_slot);
 
+
+/**
+ * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
+ * The API will return the starting point of a set of
+ * contiguous PARAM's that have been requested
+ *
+ * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
+ * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ * @count: number of contiguous Paramter RAM's
+ * @param  - the start value of Parameter RAM that should be passed if id
+ * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ *
+ * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
+ * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
+ * and 32 in the case of Primus
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
+ * set of contiguous parameter RAMs from the "param" that is passed as an
+ * argument to the API.
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
+ * starts looking for a set of contiguous parameter RAMs from the "param"
+ * that is passed as an argument to the API. On failure the API will try to
+ * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
+{
+        /*
+         * The start slot requested should be greater than
+         * the number of channels and lesser than the total number
+         * of slots
+         */
+        if (slot < edma_info[ctlr]->num_channels ||
+                slot >= edma_info[ctlr]->num_slots)
+                return -EINVAL;
+
+        /*
+         * The number of parameter RAMs requested cannot be less than 1
+         * and cannot be more than the number of slots minus the number of
+         * channels
+         */
+        if (count < 1 || count >
+                (edma_info[ctlr]->num_slots - edma_info[ctlr]->num_channels))
+                return -EINVAL;
+
+        switch (id) {
+        case EDMA_CONT_PARAMS_ANY:
+                return reserve_contiguous_params(ctlr, id, count,
+                                                 edma_info[ctlr]->num_channels);
+        case EDMA_CONT_PARAMS_FIXED_EXACT:
+        case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
+                return reserve_contiguous_params(ctlr, id, count, slot);
+        default:
+                return -EINVAL;
+        }
+
+}
+EXPORT_SYMBOL(edma_alloc_cont_slots);
+
+/**
+ * edma_free_cont_slots - deallocate DMA parameter RAMs
+ * @slot: first parameter RAM of a set of parameter RAMs to be freed
+ * @count: the number of contiguous parameter RAMs to be freed
+ *
+ * This deallocates the parameter RAM slots allocated by
+ * edma_alloc_cont_slots.
+ * Callers/applications need to keep track of sets of contiguous
+ * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * API.
+ * Callers are responsible for ensuring the slots are inactive, and will
+ * not be activated.
+ */
+int edma_free_cont_slots(unsigned slot, int count)
+{
+        unsigned ctlr;
+        int i;
+
+        ctlr = EDMA_CTLR(slot);
+        slot = EDMA_CHAN_SLOT(slot);
+
+        if (slot < edma_info[ctlr]->num_channels ||
+                slot >= edma_info[ctlr]->num_slots ||
+                count < 1)
+                return -EINVAL;
+
+        for (i = slot; i < slot + count; ++i) {
+                ctlr = EDMA_CTLR(i);
+                slot = EDMA_CHAN_SLOT(i);
+
+                memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+                        &dummy_paramset, PARM_SIZE);
+                clear_bit(slot, edma_info[ctlr]->edma_inuse);
+        }
+
+        return 0;
+}
+EXPORT_SYMBOL(edma_free_cont_slots);
+
 /*-----------------------------------------------------------------------*/
 
 /* Parameter RAM operations (i) -- read/write partial slots */