Merge branch 'clps7500' into devel

Conflicts:

	arch/arm/Kconfig

2 files changed, 0 insertions, 90 deletions

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index c47f2a3f8f8..fbe5eef1f6c 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -23,10 +23,6 @@ ifeq ($(CONFIG_ARCH_L7200),y)
 OBJS            += head-l7200.o
 endif
 
-ifeq ($(CONFIG_ARCH_CLPS7500),y)
-HEAD            = head-clps7500.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS            += head-sa1100.o
diff --git a/arch/arm/boot/compressed/head-clps7500.S b/arch/arm/boot/compressed/head-clps7500.S
deleted file mode 100644
index 4f3c78ac30a..00000000000
--- a/arch/arm/boot/compressed/head-clps7500.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-clps7500.S
- *
- * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
- */
-
-
-                /* There are three different ways the kernel can be
-                   booted on a 7500 system: from Angel (loaded in RAM), from
-                   16-bit ROM or from 32-bit Flash.  Luckily, a single kernel
-                   image does for them all. */
-                /* This branch is taken if the CPU memory width matches the
-                   actual device in use.  The default at power on is 16 bits
-                   so we must be prepared for a mismatch. */
-                .section ".start", "ax"
-2:
-                b       1f
-                .word   0xffff
-                .word   0xb632          @ mov r11, #0x03200000
-                .word   0xe3a0
-                .word   0x0000          @ mov r0, #0
-                .word   0xe3a0
-                .word   0x0080          @ strb r0, [r11, #0x80]
-                .word   0xe5cb
-                .word   0xf000          @ mov pc, #0
-                .word   0xe3a0
-1:
-                adr     r1, 2b
-                teq     r1, #0
-                bne     .Langel
-                /* This is a direct-from-ROM boot.  Copy the kernel into 
-                   RAM and run it there. */
-                mov     r0, #0x30
-                mcr     p15, 0, r0, c1, c0, 0
-                mov     r0, #0x13
-                msr     cpsr_cxsf, r0
-                mov     r12, #0x03000000        @ point to LEDs
-                orr     r12, r12, #0x00020000
-                orr     r12, r12, #0xba00
-                mov     r0, #0x5500
-                str     r0, [r12]
-                mov     r0, #0x10000000
-                orr     r0, r0, #0x8000
-                mov     r4, r0
-                ldr     r2, =_end
-2:
-                ldr     r3, [r1], #4
-                str     r3, [r0], #4
-                teq     r0, r2
-                bne     2b
-                mov     r0, #0xff00
-                str     r0, [r12]
-1:      
-                mov     r12, #0x03000000        @ point to LEDs
-                orr     r12, r12, #0x00020000
-                orr     r12, r12, #0xba00
-                mov     r0, #0xfe00
-                str     r0, [r12]
-
-                adr     lr, 1f
-                mov     r0, #0
-                mov     r1, #14         /* MACH_TYPE_CLPS7500 */
-                mov     pc, lr
-.Langel:
-#ifdef CONFIG_ANGELBOOT
-                /* Call Angel to switch into SVC mode. */
-                mov     r0, #0x17
-                swi     0x123456
-#endif
-                /* Ensure all interrupts are off and MMU disabled */
-                mrs     r0, cpsr
-                orr     r0, r0, #0xc0
-                msr     cpsr_cxsf, r0
-
-                adr     lr, 1b
-                orr     lr, lr, #0x10000000
-                mov     r0, #0x30               @ MMU off
-                mcr     p15, 0, r0, c1, c0, 0
-                mov     r0, r0
-                mov     pc, lr
-
-                .ltorg
-
-1:
-/* And the rest */
-#include "head.S"