mxc: add common debug board for 3-stack platforms

The debug board is little different for all mxc 3-stack(PDK)
platforms, it is possible here to add a common implementation to
support this board.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 232 insertions, 0 deletions

diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
new file mode 100644
index 00000000000..639c54a0799
--- /dev/null
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/hardware.h>
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR(n)    (n + 0x0)
+/* External UART */
+#define UARTA_BASE_ADDR(n)      (n + 0x8000)
+#define UARTB_BASE_ADDR(n)      (n + 0x10000)
+
+#define BOARD_IO_ADDR(n)        (n + 0x20000)
+/* LED switchs */
+#define LED_SWITCH_REG          0x00
+/* buttons */
+#define SWITCH_BUTTONS_REG      0x08
+/* status, interrupt */
+#define INTR_STATUS_REG 0x10
+#define INTR_MASK_REG           0x38
+#define INTR_RESET_REG          0x20
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER1_REG       0x40
+#define MAGIC_NUMBER2_REG       0x48
+/* CPLD code version */
+#define CPLD_CODE_VER_REG       0x50
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER3_REG       0x58
+/* module reset register*/
+#define MODULE_RESET_REG        0x60
+/* CPU ID and Personality ID */
+#define MCU_BOARD_ID_REG        0x68
+
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_GPIO(irq)    ((irq) - MXC_INTERNAL_IRQS)
+
+#define MXC_EXP_IO_BASE         (MXC_BOARD_IRQ_START)
+#define MXC_MAX_EXP_IO_LINES    16
+
+/* interrupts like external uart , external ethernet etc*/
+#define EXPIO_INT_ENET          (MXC_BOARD_IRQ_START + 0)
+#define EXPIO_INT_XUART_A       (MXC_BOARD_IRQ_START + 1)
+#define EXPIO_INT_XUART_B       (MXC_BOARD_IRQ_START + 2)
+#define EXPIO_INT_BUTTON_A      (MXC_BOARD_IRQ_START + 3)
+#define EXPIO_INT_BUTTON_B      (MXC_BOARD_IRQ_START + 4)
+
+static void __iomem *brd_io;
+static void expio_ack_irq(u32 irq);
+
+static struct resource smsc911x_resources[] = {
+        {
+                .flags = IORESOURCE_MEM,
+        } , {
+                .start = EXPIO_INT_ENET,
+                .end = EXPIO_INT_ENET,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+        .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+        .name = "smsc911x",
+        .id = 0,
+        .dev = {
+                .platform_data = &smsc911x_config,
+        },
+        .num_resources = ARRAY_SIZE(smsc911x_resources),
+        .resource = smsc911x_resources,
+};
+
+static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+        u32 imr_val;
+        u32 int_valid;
+        u32 expio_irq;
+
+        desc->chip->mask(irq);  /* irq = gpio irq number */
+
+        imr_val = __raw_readw(brd_io + INTR_MASK_REG);
+        int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+
+        expio_irq = MXC_BOARD_IRQ_START;
+        for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+                struct irq_desc *d;
+                if ((int_valid & 1) == 0)
+                        continue;
+                d = irq_desc + expio_irq;
+                if (unlikely(!(d->handle_irq)))
+                        pr_err("\nEXPIO irq: %d unhandled\n", expio_irq);
+                else
+                        d->handle_irq(expio_irq, d);
+        }
+
+        desc->chip->ack(irq);
+        desc->chip->unmask(irq);
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * Irq is an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+        u16 reg;
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+        reg = __raw_readw(brd_io + INTR_MASK_REG);
+        reg |= (1 << expio);
+        __raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static void expio_ack_irq(u32 irq)
+{
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+        __raw_writew(1 << expio, brd_io + INTR_RESET_REG);
+        __raw_writew(0, brd_io + INTR_RESET_REG);
+        expio_mask_irq(irq);
+}
+
+static void expio_unmask_irq(u32 irq)
+{
+        u16 reg;
+        u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+        reg = __raw_readw(brd_io + INTR_MASK_REG);
+        reg &= ~(1 << expio);
+        __raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+        .ack = expio_ack_irq,
+        .mask = expio_mask_irq,
+        .unmask = expio_unmask_irq,
+};
+
+int __init mxc_expio_init(u32 base, u32 p_irq)
+{
+        int i;
+
+        brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
+        if (brd_io == NULL)
+                return -ENOMEM;
+
+        if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+            (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+            (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+                pr_info("3-Stack Debug board not detected\n");
+                iounmap(brd_io);
+                brd_io = NULL;
+                return -ENODEV;
+        }
+
+        pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
+                readw(brd_io + CPLD_CODE_VER_REG));
+
+        /*
+         * Configure INT line as GPIO input
+         */
+        gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
+        gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
+
+        /* disable the interrupt and clear the status */
+        __raw_writew(0, brd_io + INTR_MASK_REG);
+        __raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
+        __raw_writew(0, brd_io + INTR_RESET_REG);
+        __raw_writew(0x1F, brd_io + INTR_MASK_REG);
+        for (i = MXC_EXP_IO_BASE;
+             i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
+                set_irq_chip(i, &expio_irq_chip);
+                set_irq_handler(i, handle_level_irq);
+                set_irq_flags(i, IRQF_VALID);
+        }
+        set_irq_type(p_irq, IRQF_TRIGGER_LOW);
+        set_irq_chained_handler(p_irq, mxc_expio_irq_handler);
+
+        /* Register Lan device on the debugboard */
+        smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
+        smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+        platform_device_register(&smsc_lan9217_device);
+
+        return 0;
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 20b2e79e54f..0527e65318f 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -80,6 +80,17 @@ config MXC_PWM
         help
           Enable support for the i.MX PWM controller(s).
 
+config MXC_DEBUG_BOARD
+        bool "Enable MXC debug board(for 3-stack)"
+        help
+          The debug board is an integral part of the MXC 3-stack(PDK)
+          platforms, it can be attached or removed from the peripheral
+          board. On debug board, several debug devices(ethernet, UART,
+          buttons, LEDs and JTAG) are implemented. Between the MCU and
+          these devices, a CPLD is added as a bridge which performs
+          data/address de-multiplexing and decode, signal level shift,
+          interrupt control and various board functions.
+
 config MXC_ULPI
         bool
 
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index c7506a80eb3..78d405ed861 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
new file mode 100644
index 00000000000..a384fdd49c6
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_3DS_DB_H__
+#define __ASM_ARCH_MXC_3DS_DB_H__
+
+extern int __init mxc_expio_init(u32 base, u32 p_irq);
+
+#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */