ixgb: use DPRINTK and msglvl, and ethtool to control it

Use DPRINTK and msglvl, and ethtool to control it. Add proper names
to netdev structs and mappings.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>

3 files changed, 54 insertions, 15 deletions

diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index c83271b3862..a687f1210cb 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -84,7 +84,12 @@ struct ixgb_adapter;
 #define IXGB_DBG(args...)
 #endif
 
-#define IXGB_ERR(args...) printk(KERN_ERR "ixgb: " args)
+#define PFX "ixgb: "
+#define DPRINTK(nlevel, klevel, fmt, args...) \
+        (void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
+        printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
+                __FUNCTION__ , ## args))
+
 
 /* TX/RX descriptor defines */
 #define DEFAULT_TXD      256
@@ -192,6 +197,7 @@ struct ixgb_adapter {
 
         /* structs defined in ixgb_hw.h */
         struct ixgb_hw hw;
+        u16 msg_enable;
         struct ixgb_hw_stats stats;
 #ifdef CONFIG_PCI_MSI
         boolean_t have_msi;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index f6baf2866ca..560b4b6c79d 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -250,6 +250,19 @@ ixgb_set_tso(struct net_device *netdev, uint32_t data)
 } 
 #endif /* NETIF_F_TSO */
 
+static uint32_t
+ixgb_get_msglevel(struct net_device *netdev)
+{
+        struct ixgb_adapter *adapter = netdev->priv;
+        return adapter->msg_enable;
+}
+
+static void
+ixgb_set_msglevel(struct net_device *netdev, uint32_t data)
+{
+        struct ixgb_adapter *adapter = netdev->priv;
+        adapter->msg_enable = data;
+}
 #define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_
 
 static int 
@@ -709,6 +722,8 @@ static struct ethtool_ops ixgb_ethtool_ops = {
         .set_tx_csum = ixgb_set_tx_csum,
         .get_sg = ethtool_op_get_sg,
         .set_sg = ethtool_op_set_sg,
+        .get_msglevel = ixgb_get_msglevel,
+        .set_msglevel = ixgb_set_msglevel,
 #ifdef NETIF_F_TSO
         .get_tso = ethtool_op_get_tso,
         .set_tso = ixgb_set_tso,
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 0de3ed08ff5..4115bf360d9 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -150,6 +150,11 @@ MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+static int debug = DEFAULT_DEBUG_LEVEL_SHIFT;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
 /* some defines for controlling descriptor fetches in h/w */
 #define RXDCTL_WTHRESH_DEFAULT 16       /* chip writes back at this many or RXT0 */
 #define RXDCTL_PTHRESH_DEFAULT 0                /* chip considers prefech below
@@ -251,7 +256,7 @@ ixgb_up(struct ixgb_adapter *adapter)
         if (!pcix)
            adapter->have_msi = FALSE;
         else if((err = pci_enable_msi(adapter->pdev))) {
-                printk (KERN_ERR
+                DPRINTK(PROBE, ERR,
                  "Unable to allocate MSI interrupt Error: %d\n", err);
                 adapter->have_msi = FALSE;
                 /* proceed to try to request regular interrupt */
@@ -261,8 +266,11 @@ ixgb_up(struct ixgb_adapter *adapter)
 #endif
         if((err = request_irq(adapter->pdev->irq, &ixgb_intr,
                                   SA_SHIRQ | SA_SAMPLE_RANDOM,
-                                  netdev->name, netdev)))
+                                  netdev->name, netdev))) {
+                DPRINTK(PROBE, ERR,
+                 "Unable to allocate interrupt Error: %d\n", err);
                 return err;
+        }
 
         /* disable interrupts and get the hardware into a known state */
         IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff);
@@ -328,7 +336,7 @@ ixgb_reset(struct ixgb_adapter *adapter)
 
         ixgb_adapter_stop(&adapter->hw);
         if(!ixgb_init_hw(&adapter->hw))
-                IXGB_DBG("ixgb_init_hw failed.\n");
+                DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n");
 }
 
 /**
@@ -365,7 +373,8 @@ ixgb_probe(struct pci_dev *pdev,
         } else {
                 if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) ||
                    (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
-                        IXGB_ERR("No usable DMA configuration, aborting\n");
+                        printk(KERN_ERR
+                         "ixgb: No usable DMA configuration, aborting\n");
                         goto err_dma_mask;
                 }
                 pci_using_dac = 0;
@@ -390,6 +399,7 @@ ixgb_probe(struct pci_dev *pdev,
         adapter->netdev = netdev;
         adapter->pdev = pdev;
         adapter->hw.back = adapter;
+        adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT);
 
         mmio_start = pci_resource_start(pdev, BAR_0);
         mmio_len = pci_resource_len(pdev, BAR_0);
@@ -430,6 +440,7 @@ ixgb_probe(struct pci_dev *pdev,
         netdev->poll_controller = ixgb_netpoll;
 #endif
 
+        strcpy(netdev->name, pci_name(pdev));
         netdev->mem_start = mmio_start;
         netdev->mem_end = mmio_start + mmio_len;
         netdev->base_addr = adapter->hw.io_base;
@@ -461,7 +472,7 @@ ixgb_probe(struct pci_dev *pdev,
         /* make sure the EEPROM is good */
 
         if(!ixgb_validate_eeprom_checksum(&adapter->hw)) {
-                printk(KERN_ERR "The EEPROM Checksum Is Not Valid\n");
+                DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
                 err = -EIO;
                 goto err_eeprom;
         }
@@ -470,6 +481,7 @@ ixgb_probe(struct pci_dev *pdev,
         memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
 
         if(!is_valid_ether_addr(netdev->perm_addr)) {
+                DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
                 err = -EIO;
                 goto err_eeprom;
         }
@@ -483,6 +495,7 @@ ixgb_probe(struct pci_dev *pdev,
         INIT_WORK(&adapter->tx_timeout_task,
                   (void (*)(void *))ixgb_tx_timeout_task, netdev);
 
+        strcpy(netdev->name, "eth%d");
         if((err = register_netdev(netdev)))
                 goto err_register;
 
@@ -491,8 +504,7 @@ ixgb_probe(struct pci_dev *pdev,
         netif_carrier_off(netdev);
         netif_stop_queue(netdev);
 
-        printk(KERN_INFO "%s: Intel(R) PRO/10GbE Network Connection\n",
-                   netdev->name);
+        DPRINTK(PROBE, INFO, "Intel(R) PRO/10GbE Network Connection\n");
         ixgb_check_options(adapter);
         /* reset the hardware with the new settings */
 
@@ -573,7 +585,7 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
                         hw->mac_type = ixgb_82597;
         else {
                 /* should never have loaded on this device */
-                printk(KERN_ERR "ixgb: unsupported device id\n");
+                DPRINTK(PROBE, ERR, "unsupported device id\n");
         }
 
         /* enable flow control to be programmed */
@@ -671,6 +683,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
         size = sizeof(struct ixgb_buffer) * txdr->count;
         txdr->buffer_info = vmalloc(size);
         if(!txdr->buffer_info) {
+                DPRINTK(PROBE, ERR,
+                 "Unable to allocate transmit descriptor ring memory\n");
                 return -ENOMEM;
         }
         memset(txdr->buffer_info, 0, size);
@@ -683,6 +697,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
         txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
         if(!txdr->desc) {
                 vfree(txdr->buffer_info);
+                DPRINTK(PROBE, ERR,
+                 "Unable to allocate transmit descriptor memory\n");
                 return -ENOMEM;
         }
         memset(txdr->desc, 0, txdr->size);
@@ -756,6 +772,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
         size = sizeof(struct ixgb_buffer) * rxdr->count;
         rxdr->buffer_info = vmalloc(size);
         if(!rxdr->buffer_info) {
+                DPRINTK(PROBE, ERR,
+                 "Unable to allocate receive descriptor ring\n");
                 return -ENOMEM;
         }
         memset(rxdr->buffer_info, 0, size);
@@ -769,6 +787,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
 
         if(!rxdr->desc) {
                 vfree(rxdr->buffer_info);
+                DPRINTK(PROBE, ERR,
+                 "Unable to allocate receive descriptors\n");
                 return -ENOMEM;
         }
         memset(rxdr->desc, 0, rxdr->size);
@@ -1118,8 +1138,8 @@ ixgb_watchdog(unsigned long data)
 
         if(adapter->hw.link_up) {
                 if(!netif_carrier_ok(netdev)) {
-                        printk(KERN_INFO "ixgb: %s NIC Link is Up %d Mbps %s\n",
-                                   netdev->name, 10000, "Full Duplex");
+                        DPRINTK(LINK, INFO,
+                                "NIC Link is Up 10000 Mbps Full Duplex\n");
                         adapter->link_speed = 10000;
                         adapter->link_duplex = FULL_DUPLEX;
                         netif_carrier_on(netdev);
@@ -1129,9 +1149,7 @@ ixgb_watchdog(unsigned long data)
                 if(netif_carrier_ok(netdev)) {
                         adapter->link_speed = 0;
                         adapter->link_duplex = 0;
-                        printk(KERN_INFO
-                                   "ixgb: %s NIC Link is Down\n",
-                                   netdev->name);
+                        DPRINTK(LINK, INFO, "NIC Link is Down\n");
                         netif_carrier_off(netdev);
                         netif_stop_queue(netdev);
 
@@ -1529,7 +1547,7 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu)
 
         if((max_frame < IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH)
            || (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
-                IXGB_ERR("Invalid MTU setting\n");
+                DPRINTK(PROBE, ERR, "Invalid MTU setting %d\n", new_mtu);
                 return -EINVAL;
         }