ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim

Add Contec Micro9-Slim support

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5750/1
Signed-off-by: Hubert Feurstein <hubert.feurstein@contec.at>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 23 insertions, 1 deletions

diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 4ad0380ff80..9167c3d2a5e 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -153,6 +153,14 @@ config MACH_MICRO9L
           Say 'Y' here if you want your kernel to support the
           Contec Micro9-Lite board.
 
+config MACH_MICRO9S
+        bool "Support Contec Micro9-Slim"
+        depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+        select MACH_MICRO9
+        help
+          Say 'Y' here if you want your kernel to support the
+          Contec Micro9-Slim board.
+
 config MACH_TS72XX
         bool "Support Technologic Systems TS-72xx SBC"
         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 49fbee5adde..d83b80478b0 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,6 +28,7 @@
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
  * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
 
@@ -70,7 +71,7 @@ static void __init micro9_register_flash(void)
 {
         if (machine_is_micro9())
                 __micro9_register_flash(4);
-        else if (machine_is_micro9m())
+        else if (machine_is_micro9m() || machine_is_micro9s())
                 __micro9_register_flash(micro9_detect_bootwidth());
 }
 
@@ -129,3 +130,16 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
         .init_machine   = micro9_init_machine,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+        /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+        .phys_io        = EP93XX_APB_PHYS_BASE,
+        .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+        .map_io         = ep93xx_map_io,
+        .init_irq       = ep93xx_init_irq,
+        .timer          = &ep93xx_timer,
+        .init_machine   = micro9_init_machine,
+MACHINE_END
+#endif