[SCSI] 53c700: m68k support for the 53c700 SCSI core

Add m68k support to the 53c700 SCSI driver

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

3 files changed, 20 insertions, 18 deletions

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 405d9d6f965..92dd7a6b524 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -653,7 +653,6 @@ NCR_700_chip_setup(struct Scsi_Host *host)
 {
         struct NCR_700_Host_Parameters *hostdata = 
                 (struct NCR_700_Host_Parameters *)host->hostdata[0];
-        __u32 dcntl_extra = 0;
         __u8 min_period;
         __u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
 
@@ -678,13 +677,14 @@ NCR_700_chip_setup(struct Scsi_Host *host)
                                 burst_disable = BURST_DISABLE;
                                 break;
                 }
-                dcntl_extra = COMPAT_700_MODE;
+                hostdata->dcntl_extra |= COMPAT_700_MODE;
 
-                NCR_700_writeb(dcntl_extra, host, DCNTL_REG);
+                NCR_700_writeb(hostdata->dcntl_extra, host, DCNTL_REG);
                 NCR_700_writeb(burst_length | hostdata->dmode_extra,
                                host, DMODE_710_REG);
-                NCR_700_writeb(burst_disable | (hostdata->differential ? 
-                                                DIFF : 0), host, CTEST7_REG);
+                NCR_700_writeb(burst_disable | hostdata->ctest7_extra |
+                               (hostdata->differential ? DIFF : 0),
+                               host, CTEST7_REG);
                 NCR_700_writeb(BTB_TIMER_DISABLE, host, CTEST0_REG);
                 NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY | PARITY
                                | AUTO_ATN, host, SCNTL0_REG);
@@ -719,13 +719,13 @@ NCR_700_chip_setup(struct Scsi_Host *host)
                  * of spec: sync divider 2, async divider 3 */
                 DEBUG(("53c700: sync 2 async 3\n"));
                 NCR_700_writeb(SYNC_DIV_2_0, host, SBCL_REG);
-                NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
+                NCR_700_writeb(ASYNC_DIV_3_0 | hostdata->dcntl_extra, host, DCNTL_REG);
                 hostdata->sync_clock = hostdata->clock/2;
         } else  if(hostdata->clock > 50  && hostdata->clock <= 75) {
                 /* sync divider 1.5, async divider 3 */
                 DEBUG(("53c700: sync 1.5 async 3\n"));
                 NCR_700_writeb(SYNC_DIV_1_5, host, SBCL_REG);
-                NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
+                NCR_700_writeb(ASYNC_DIV_3_0 | hostdata->dcntl_extra, host, DCNTL_REG);
                 hostdata->sync_clock = hostdata->clock*2;
                 hostdata->sync_clock /= 3;
                 
@@ -733,18 +733,18 @@ NCR_700_chip_setup(struct Scsi_Host *host)
                 /* sync divider 1, async divider 2 */
                 DEBUG(("53c700: sync 1 async 2\n"));
                 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
-                NCR_700_writeb(ASYNC_DIV_2_0 | dcntl_extra, host, DCNTL_REG);
+                NCR_700_writeb(ASYNC_DIV_2_0 | hostdata->dcntl_extra, host, DCNTL_REG);
                 hostdata->sync_clock = hostdata->clock;
         } else if(hostdata->clock > 25 && hostdata->clock <=37) {
                 /* sync divider 1, async divider 1.5 */
                 DEBUG(("53c700: sync 1 async 1.5\n"));
                 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
-                NCR_700_writeb(ASYNC_DIV_1_5 | dcntl_extra, host, DCNTL_REG);
+                NCR_700_writeb(ASYNC_DIV_1_5 | hostdata->dcntl_extra, host, DCNTL_REG);
                 hostdata->sync_clock = hostdata->clock;
         } else {
                 DEBUG(("53c700: sync 1 async 1\n"));
                 NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
-                NCR_700_writeb(ASYNC_DIV_1_0 | dcntl_extra, host, DCNTL_REG);
+                NCR_700_writeb(ASYNC_DIV_1_0 | hostdata->dcntl_extra, host, DCNTL_REG);
                 /* sync divider 1, async divider 1 */
                 hostdata->sync_clock = hostdata->clock;
         }
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h
index 841e1bb27d5..e06bdfeab42 100644
--- a/drivers/scsi/53c700.h
+++ b/drivers/scsi/53c700.h
@@ -177,6 +177,7 @@ struct NCR_700_command_slot {
         __u8    state;
         #define NCR_700_FLAG_AUTOSENSE  0x01
         __u8    flags;
+        __u8    pad1[2];        /* Needed for m68k where min alignment is 2 bytes */
         int     tag;
         __u32   resume_offset;
         struct scsi_cmnd *cmnd;
@@ -196,6 +197,8 @@ struct NCR_700_Host_Parameters {
         void __iomem    *base;          /* the base for the port (copied to host) */
         struct device   *dev;
         __u32   dmode_extra;    /* adjustable bus settings */
+        __u32   dcntl_extra;    /* adjustable bus settings */
+        __u32   ctest7_extra;   /* adjustable bus settings */
         __u32   differential:1; /* if we are differential */
 #ifdef CONFIG_53C700_LE_ON_BE
         /* This option is for HP only.  Set it if your chip is wired for
@@ -352,6 +355,7 @@ struct NCR_700_Host_Parameters {
 #define         SEL_TIMEOUT_DISABLE     0x10 /* 710 only */
 #define         DFP                     0x08
 #define         EVP                     0x04
+#define         CTEST7_TT1              0x02
 #define         DIFF                    0x01
 #define CTEST6_REG                      0x1A
 #define TEMP_REG                        0x1C
@@ -385,6 +389,7 @@ struct NCR_700_Host_Parameters {
 #define         SOFTWARE_RESET          0x01
 #define         COMPAT_700_MODE         0x01
 #define         SCRPTS_16BITS           0x20
+#define         EA_710                  0x20
 #define         ASYNC_DIV_2_0           0x00
 #define         ASYNC_DIV_1_5           0x40
 #define         ASYNC_DIV_1_0           0x80
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index aac9cd9a172..da5e888c49d 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1006,6 +1006,11 @@ config SCSI_STEX
           To compile this driver as a module, choose M here: the
           module will be called stex.
 
+config 53C700_BE_BUS
+        bool
+        depends on M68K
+        default y
+
 config SCSI_SYM53C8XX_2
         tristate "SYM53C8XX Version 2 SCSI support"
         depends on PCI && SCSI
@@ -1727,14 +1732,6 @@ config BVME6000_SCSI
           SCSI controller chip.  Almost everyone using one of these boards
           will want to say Y to this question.
 
-config SCSI_NCR53C7xx_FAST
-        bool "allow FAST-SCSI [10MHz]"
-        depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI
-        help
-          This will enable 10MHz FAST-SCSI transfers with your host
-          adapter. Some systems have problems with that speed, so it's safest
-          to say N here.
-
 config SUN3_SCSI
         tristate "Sun3 NCR5380 SCSI"
         depends on SUN3 && SCSI