/*
* Low-Level PCI Access for i386 machines.
*
* (c) 1999 Martin Mares <mj@ucw.cz>
*/
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
#define PCI_PROBE_BIOS 0x0001
#define PCI_PROBE_CONF1 0x0002
#define PCI_PROBE_CONF2 0x0004
#define PCI_PROBE_MMCONF 0x0008
#define PCI_PROBE_MASK 0x000f
#define PCI_PROBE_NOEARLY 0x0010
#define PCI_NO_CHECKS 0x0400
#define PCI_USE_PIRQ_MASK 0x0800
#define PCI_ASSIGN_ROMS 0x1000
#define PCI_BIOS_IRQ_SCAN 0x2000
#define PCI_ASSIGN_ALL_BUSSES 0x4000
#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
#define PCI_USE__CRS 0x10000
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
#define PCI_NOASSIGN_ROMS 0x80000
extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
enum pci_bf_sort_state {
pci_bf_sort_default,
pci_force_nobf,
pci_force_bf,
pci_dmi_bf,
};
/* pci-i386.c */
extern unsigned int pcibios_max_latency;
void pcibios_resource_survey(void);
/* pci-pc.c */
extern int pcibios_last_bus;
extern struct pci_bus *pci_root_bus;
extern struct pci_ops pci_root_ops;
/* pci-irq.c */
struct irq_info {
u8 bus, devfn; /* Bus, device and function */
struct {
u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
u16 bitmap; /* Available IRQs */
} __attribute__((packed)) irq[4];
u8 slot; /* Slot number, 0=onboard */
u8 rfu;
} __attribute__((packed));
struct irq_routing_table {
u32 signature; /* PIRQ_SIGNATURE should be here */
u16 version; /* PIRQ_VERSION */
u16 size; /* Table size in bytes */
u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
u32 miniport_data; /* Crap */
u8 rfu[11];
u8 checksum; /* Modulo 256 checksum must give zero */
struct irq_info slots[0];
} __attribute__((packed));
extern unsigned int pcibios_irq_mask;
extern int pcibios_scanned;
extern spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
struct pci_raw_ops {
int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val);
int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val);
};
extern struct pci_raw_ops *raw_pci_ops;
extern struct pci_raw_ops *raw_pci_ext_ops;
extern struct pci_raw_ops pci_direct_conf1;
/* arch_initcall level */
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
extern int pci_olpc_init(void);
extern void __init dmi_check_pciprobe(void);
extern void __init dmi_check_skip_isa_align(void);
/* some common used subsys_initcalls */
extern int __init pci_acpi_init(void);
extern int __init pcibios_irq_init(void);
extern int __init pci_numa_init(void);
extern int __init pcibios_init(void);
/* pci-mmconfig.c */
extern int __init pci_mmcfg_arch_init(void);
extern void __init pci_mmcfg_arch_free(void);
/*
* AMD Fam10h CPUs are buggy, and cannot access MMIO config space
* on their northbrige except through the * %eax register. As such, you MUST
* NOT use normal IOMEM accesses, you need to only use the magic mmio-config
* accessor functions.
* In fact just use pci_config_*, nothing else please.
*/
static inline unsigned char mmio_config_readb(void __iomem *pos)
{
u8 val;
asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
return val;
}
static inline unsigned short mmio_config_readw(void __iomem *pos)
{
u16 val;
asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
return val;
}
static inline unsigned int mmio_config_readl(void __iomem *pos)
{
u32 val;
asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
return val;
}
static inline void mmio_config_writeb(void __iomem *pos, u8 val)
{
asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
}
static inline void mmio_config_writew(void __iomem *pos, u16 val)
{
asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
}
static inline void mmio_config_writel(void __iomem *pos, u32 val)
{
asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
}
