/*
* arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling
*
* Copyright (C) 1997 Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/errno.h>
#include <asm/ptrace.h>
#include <asm/signal.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/open_pic.h>
#include <asm/i8259.h>
#include "open_pic_defs.h"
#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx)
#define OPENPIC_BIG_ENDIAN
#endif
void __iomem *OpenPIC_Addr;
static volatile struct OpenPIC __iomem *OpenPIC = NULL;
/*
* We define OpenPIC_InitSenses table thusly:
* bit 0x1: sense, 0 for edge and 1 for level.
* bit 0x2: polarity, 0 for negative, 1 for positive.
*/
u_int OpenPIC_NumInitSenses __initdata = 0;
u_char *OpenPIC_InitSenses __initdata = NULL;
extern int use_of_interrupt_tree;
static u_int NumProcessors;
static u_int NumSources;
static int open_pic_irq_offset;
static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
static int openpic_cascade_irq = -1;
static int (*openpic_cascade_fn)(struct pt_regs *);
/* Global Operations */
static void openpic_disable_8259_pass_through(void);
static void openpic_set_spurious(u_int vector);
#ifdef CONFIG_SMP
/* Interprocessor Interrupts */
static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *);
#endif
/* Timer Interrupts */
static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
static void openpic_maptimer(u_int timer, cpumask_t cpumask);
/* Interrupt Sources */
static void openpic_enable_irq(u_int irq);
static void openpic_disable_irq(u_int irq);
static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
int is_level);
static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
/*
* These functions are not used but the code is kept here
* for completeness and future reference.
*/
#ifdef notused
static void openpic_enable_8259_pass_through(void);
static u_int openpic_get_spurious(void);
static void openpic_set_sense(u_int irq, int sense);
#endif /* notused */
/*
* Description of the openpic for the higher-level irq code
*/
static void openpic_end_irq(unsigned int irq_nr);
static void openpic_ack_irq(unsigned int irq_nr);
static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
struct hw_interrupt_type open_pic = {
.typename = " OpenPIC ",
.enable = openpic_enable_irq,
.disable = openpic_disable_irq,
.ack = openpic_ack_irq,
.end = openpic_end_irq,
.set_affinity = openpic_set_affinity,
};
#ifdef CONFIG_SMP
static void openpic_end_ipi(unsigned int irq_nr);
static void openpic_ack_ipi(unsigned int irq_nr);
static void openpic_enable_ipi(unsigned int irq_nr);
static void openpic_disable_ipi(unsigned int irq_nr);
struct hw_interrupt_type open_pic_ipi = {
.typename = " OpenPIC ",
.enable = openpic_enable_ipi,
.disable = openpic_disable_ipi,
.ack = openpic_ack_ipi,
.end = openpic_end_ipi,
};
#endif /* CONFIG_SMP */
/*
* Accesses to the current processor's openpic registers
*/
#ifdef CONFIG_SMP
#define THIS_CPU Processor[cpu]
#define DECL_THIS_CPU int cpu = smp_hw_index[smp_processor_id()]
#define CHECK_THIS_CPU check_arg_cpu(cpu)
#else
#define THIS_CPU Processor[0]
#define DECL_THIS_CPU
#define CHECK_THIS_CPU
#endif /* CONFIG_SMP */
#if 1
#define check_arg_ipi(ipi) \
if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
#define check_arg_timer(timer) \
if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
#define check_arg_vec(vec) \
if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
#define check_arg_pri(pri) \
if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
/*
* Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
* data has probably been corrupted and we're going to panic or deadlock later
* anyway --Troy
*/
#define check_arg_irq(irq) \
if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
|| ISR[irq - open_pic_irq_offset] == 0) { \
printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
dump_stack(); }
#define check_arg_cpu(cpu) \
if (cpu < 0 || cpu >= NumProcessors){ \
printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
dump_stack(); }
#else
#define check_arg_ipi(ipi) do {} while (0)
#define check_arg_timer(timer) do {} while (0)
#define check_arg_vec(vec) do {} while (0)
#define check_arg_pri(pri) do {} while (0)
#define check_arg_irq(irq) do {} while (0)
#define check_arg_cpu(cpu) do {} while (0)
#endif
u_int openpic_read(volatile u_int __iomem *addr)
{
u_int val;
#ifdef OPENPIC_BIG_ENDIAN
val = in_be32(addr);
#else
val = in_le32(addr);
#endif
return val;
}
static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
{
#ifdef OPENPIC_BIG_ENDIAN
out_be32(addr, val);
#else
out_le32(addr, val);
#endif
}
static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
{
u_int val = openpic_read(addr);
return val & mask;
}
inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
u_int field)
{
u_int val = openpic_read(addr);
openpic_write(addr, (val & ~mask) | (field & mask));
}
static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield(addr, mask, 0);
}
static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield(addr, mask, mask);
}
static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
u_int field)
{
openpic_setfield(addr, OPENPIC_MASK);
while (openpic_read(addr) & OPENPIC_ACTIVITY);
openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
}
#ifdef CONFIG_SMP
/* yes this is right ... bug, feature, you decide! -- tgall */
u_int openpic_read_IPI(volatile u_int __iomem * addr)
{
u_int val = 0;
#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
val = in_be32(addr);
#else
val = in_le32(addr);
#endif
return val;
}
/* because of the power3 be / le above, this is needed */
inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
{
u_int val = openpic_read_IPI(addr);
openpic_write(addr, (val & ~mask) | (field & mask));
}
static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield_IPI(addr, mask, 0);
}
static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
{
openpic_writefield_IPI(addr, mask, mask);
}
static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
{
openpic_setfield_IPI(addr, OPENPIC_MASK);
/* wait until it's not in use */
/* BenH: Is this code really enough ? I would rather check the result
* and eventually retry ...
*/
while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_EPIC_SERIAL_MODE
/* On platforms that may use EPIC serial mode, the default is enabled. */
int epic_serial_mode = 1;
static void __init openpic_eicr_set_clk(u_int clkval)
{
openpic_writefield(&OpenPIC->Global.Global_Configuration1,
OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
}
static void __init openpic_enable_sie(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration1,
OPENPIC_EICR_SIE);
}
#endif
#if defined(CONFIG_EPIC_SERIAL_MODE)
static void openpic_reset(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_RESET);
while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_RESET))
mb();
}
#endif
void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
{
volatile OpenPIC_Source __iomem *src = first_ISR;
int i, last_irq;
last_irq = first_irq + num_irqs;
if (last_irq > NumSources)
NumSources = last_irq;
if (src == 0)
src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
for (i = first_irq; i < last_irq; ++i, ++src)
ISR[i] = src;
}
/*
* The `offset' parameter defines where the interrupts handled by the
* OpenPIC start in the space of interrupt numbers that the kernel knows
* about. In other words, the OpenPIC's IRQ0 is numbered `offset' in the
* kernel's interrupt numbering scheme.
* We assume there is only one OpenPIC.
*/
void __init openpic_init(int offset)
{
u_int t, i;
u_int timerfreq;
const char *version;
if (!OpenPIC_Addr) {
printk("No OpenPIC found !\n");
return;
}
OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
#ifdef CONFIG_EPIC_SERIAL_MODE
/* Have to start from ground zero.
*/
openpic_reset();
#endif
if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
switch (t & OPENPIC_FEATURE_VERSION_MASK) {
case 1:
version = "1.0";
break;
case 2:
version = "1.2";
break;
case 3:
version = "1.3";
break;
default:
version = "?";
break;
}
NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
if (NumSources == 0)
openpic_set_sources(0,
((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
NULL);
printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
version, NumProcessors, NumSources, OpenPIC);
timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
if (timerfreq)
printk("OpenPIC timer frequency is %d.%06d MHz\n",
timerfreq / 1000000, timerfreq % 1000000);
open_pic_irq_offset = offset;
/* Initialize timer interrupts */
if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
/* Disabled, Priority 0 */
openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
/* No processor */
openpic_maptimer(i, CPU_MASK_NONE);
}
#ifdef CONFIG_SMP
/* Initialize IPI interrupts */
if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
for (i = 0; i < OPENPIC_NUM_IPI; i++) {
/* Disabled, increased priorities 10..13 */
openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
OPENPIC_VEC_IPI+i+offset);
/* IPIs are per-CPU */
irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
}
#endif
/* Initialize external interrupts */
if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
openpic_set_priority(0xf);
/* Init all external sources, including possibly the cascade. */
for (i = 0; i < NumSources; i++) {
int sense;
if (ISR[i] == 0)
continue;
/* the bootloader may have left it enabled (bad !) */
openpic_disable_irq(i+offset);
sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
if (sense & IRQ_SENSE_MASK)
irq_desc[i+offset].status = IRQ_LEVEL;
/* Enabled, Default priority */
openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
(sense & IRQ_POLARITY_MASK),
(sense & IRQ_SENSE_MASK));
/* Processor 0 */
openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
}
/* Init descriptors */
for (i = offset; i < NumSources + offset; i++)
irq_desc[i].handler = &open_pic;
/* Initialize the spurious interrupt */
if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
openpic_disable_8259_pass_through();
#ifdef CONFIG_EPIC_SERIAL_MODE
if (epic_serial_mode) {
openpic_eicr_set_clk(7); /* Slowest value until we know better */
openpic_enable_sie();
}
#endif
openpic_set_priority(0);
if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
}
#ifdef notused
static void openpic_enable_8259_pass_through(void)
{
openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
}
#endif /* notused */
static void openpic_disable_8259_pass_through(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
}
/*
* Find out the current interrupt
*/
u_int openpic_irq(void)
{
u_int vec;
DECL_THIS_CPU;
CHECK_THIS_CPU;
vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
OPENPIC_VECTOR_MASK);
return vec;
}
void openpic_eoi(void)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
/* Handle PCI write posting */
(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
}
u_int openpic_get_priority(void)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
OPENPIC_CURRENT_TASK_PRIORITY_MASK);
}
void openpic_set_priority(u_int pri)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
check_arg_pri(pri);
openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
}
/*
* Get/set the spurious vector
*/
#ifdef notused
static u_int openpic_get_spurious(void)
{
return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
OPENPIC_VECTOR_MASK);
}
#endif /* notused */
static void openpic_set_spurious(u_int vec)
{
check_arg_vec(vec);
openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
vec);
}
#ifdef CONFIG_SMP
/*
* Convert a cpu mask from logical to physical cpu numbers.
*/
static inline cpumask_t physmask(cpumask_t cpumask)
{
int i;
cpumask_t mask = CPU_MASK_NONE;
cpus_and(cpumask, cpu_online_map, cpumask);
for (i = 0; i < NR_CPUS; i++)
if (cpu_isset(i, cpumask))
cpu_set(smp_hw_index[i], mask);
return mask;
}
#else
#define physmask(cpumask) (cpumask)
#endif
void openpic_reset_processor_phys(u_int mask)
{
openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
}
#if defined(CONFIG_SMP) || defined(CONFIG_PM)
static DEFINE_SPINLOCK(openpic_setup_lock);
#endif
#ifdef CONFIG_SMP
/*
* Initialize an interprocessor interrupt (and disable it)
*
* ipi: OpenPIC interprocessor interrupt number
* pri: interrupt source priority
* vec: the vector it will produce
*/
static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
{
check_arg_ipi(ipi);
check_arg_pri(pri);
check_arg_vec(vec);
openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
(pri << OPENPIC_PRIORITY_SHIFT) | vec);
}
/*
* Send an IPI to one or more CPUs
*
* Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
* and not a system-wide interrupt number
*/
void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
{
DECL_THIS_CPU;
CHECK_THIS_CPU;
check_arg_ipi(ipi);
openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
cpus_addr(physmask(cpumask))[0]);
}
void openpic_request_IPIs(void)
{
int i;
/*
* Make sure this matches what is defined in smp.c for
* smp_message_{pass|recv}() or what shows up in
* /proc/interrupts will be wrong!!! --Troy */
if (OpenPIC == NULL)
return;
/* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
openpic_ipi_action, SA_INTERRUPT,
"IPI0 (call function)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
openpic_ipi_action, SA_INTERRUPT,
"IPI1 (reschedule)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
openpic_ipi_action, SA_INTERRUPT,
"IPI2 (invalidate tlb)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
openpic_ipi_action, SA_INTERRUPT,
"IPI3 (xmon break)", NULL);
for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
}
/*
* Do per-cpu setup for SMP systems.
*
* Get IPI's working and start taking interrupts.
* -- Cort
*/
void __devinit do_openpic_setup_cpu(void)
{
#ifdef CONFIG_IRQ_ALL_CPUS
int i;
cpumask_t msk = CPU_MASK_NONE;
#endif
spin_lock(&openpic_setup_lock);
#ifdef CONFIG_IRQ_ALL_CPUS
cpu_set(smp_hw_index[smp_processor_id()], msk);
/* let the openpic know we want intrs. default affinity
* is 0xffffffff until changed via /proc
* That's how it's done on x86. If we want it differently, then
* we should make sure we also change the default values of irq_affinity
* in irq.c.
*/
for (i = 0; i < NumSources; i++)
openpic_mapirq(i, msk, CPU_MASK_ALL);
#endif /* CONFIG_IRQ_ALL_CPUS */
openpic_set_priority(0);
spin_unlock(&openpic_setup_lock);
}
#endif /* CONFIG_SMP */
/*
* Initialize a timer interrupt (and disable it)
*
* timer: OpenPIC timer number
* pri: interrupt source priority
* vec: the vector it will produce
*/
static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
{
check_arg_timer(timer);
check_arg_pri(pri);
check_arg_vec(vec);
openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
(pri << OPENPIC_PRIORITY_SHIFT) | vec);
}
/*
* Map a timer interrupt to one or more CPUs
*/
static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
{
cpumask_t phys = physmask(cpumask);
check_arg_timer(timer);
openpic_write(&OpenPIC->Global.Timer[timer].Destination,
cpus_addr(phys)[0]);
}
/*
* Change the priority of an interrupt
*/
void __init
openpic_set_irq_priority(u_int irq, u_int pri)
{
check_arg_irq(irq);
openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
OPENPIC_PRIORITY_MASK,
pri << OPENPIC_PRIORITY_SHIFT);
}
/*
* Initalize the interrupt source which will generate an NMI.
* This raises the interrupt's priority from 8 to 9.
*
* irq: The logical IRQ which generates an NMI.
*/
void __init
openpic_init_nmi_irq(u_int irq)
{
check_arg_irq(irq);
openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
}
/*
*
* All functions below take an offset'ed irq argument
*
*/
/*
* Hookup a cascade to the OpenPIC.
*/
static struct irqaction openpic_cascade_irqaction = {
.handler = no_action,
.flags = SA_INTERRUPT,
.mask = CPU_MASK_NONE,
};
void __init
openpic_hookup_cascade(u_int irq, char *name,
int (*cascade_fn)(struct pt_regs *))
{
openpic_cascade_irq = irq;
openpic_cascade_fn = cascade_fn;
if (setup_irq(irq, &openpic_cascade_irqaction))
printk("Unable to get OpenPIC IRQ %d for cascade\n",
irq - open_pic_irq_offset);
}
/*
* Enable/disable an external interrupt source
*
* Externally called, irq is an offseted system-wide interrupt number
*/
static void openpic_enable_irq(u_int irq)
{
volatile u_int __iomem *vpp;
check_arg_irq(irq);
vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
openpic_clearfield(vpp, OPENPIC_MASK);
/* make sure mask gets to controller before we return to user */
do {
mb(); /* sync is probably useless here */
} while (openpic_readfield(vpp, OPENPIC_MASK));
}
static void openpic_disable_irq(u_int irq)
{
volatile u_int __iomem *vpp;
u32 vp;
check_arg_irq(irq);
vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
openpic_setfield(vpp, OPENPIC_MASK);
/* make sure mask gets to controller before we return to user */
do {
mb(); /* sync is probably useless here */
vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
}
#ifdef CONFIG_SMP
/*
* Enable/disable an IPI interrupt source
*
* Externally called, irq is an offseted system-wide interrupt number
*/
void openpic_enable_ipi(u_int irq)
{
irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
check_arg_ipi(irq);
openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
}
void openpic_disable_ipi(u_int irq)
{
irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
check_arg_ipi(irq);
openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
}
#endif
/*
* Initialize an interrupt source (and disable it!)
*
* irq: OpenPIC interrupt number
* pri: interrupt source priority
* vec: the vector it will produce
* pol: polarity (1 for positive, 0 for negative)
* sense: 1 for level, 0 for edge
*/
static void __init
openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
{
openpic_safe_writefield(&ISR[irq]->Vector_Priority,
OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
(pri << OPENPIC_PRIORITY_SHIFT) | vec |
(pol ? OPENPIC_POLARITY_POSITIVE :
OPENPIC_POLARITY_NEGATIVE) |
(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
}
/*
* Map an interrupt source to one or more CPUs
*/
static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
{
if (ISR[irq] == 0)
return;
if (!cpus_empty(keepmask)) {
cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
cpus_and(irqdest, irqdest, keepmask);
cpus_or(physmask, physmask, irqdest);
}
openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
}
#ifdef notused
/*
* Set the sense for an interrupt source (and disable it!)
*
* sense: 1 for level, 0 for edge
*/
static void openpic_set_sense(u_int irq, int sense)
{
if (ISR[irq] != 0)
openpic_safe_writefield(&ISR[irq]->Vector_Priority,
OPENPIC_SENSE_LEVEL,
(sense ? OPENPIC_SENSE_LEVEL : 0));
}
#endif /* notused */
/* No spinlocks, should not be necessary with the OpenPIC
* (1 register = 1 interrupt and we have the desc lock).
*/
static void openpic_ack_irq(unsigned int irq_nr)
{
#ifdef __SLOW_VERSION__
openpic_disable_irq(irq_nr);
openpic_eoi();
#else
if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
openpic_eoi();
#endif
}
static void openpic_end_irq(unsigned int irq_nr)
{
#ifdef __SLOW_VERSION__
if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
&& irq_desc[irq_nr].action)
openpic_enable_irq(irq_nr);
#else
if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
openpic_eoi();
#endif
}
static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
{
openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
}
#ifdef CONFIG_SMP
static void openpic_ack_ipi(unsigned int irq_nr)
{
openpic_eoi();
}
static void openpic_end_ipi(unsigned int irq_nr)
{
}
static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *regs)
{
smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset, regs);
return IRQ_HANDLED;
}
#endif /* CONFIG_SMP */
int
openpic_get_irq(struct pt_regs *regs)
{
int irq = openpic_irq();
/*
* Check for the cascade interrupt and call the cascaded
* interrupt controller function (usually i8259_irq) if so.
* This should move to irq.c eventually. -- paulus
*/
if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
int cirq = openpic_cascade_fn(regs);
/* Allow for the cascade being shared with other devices */
if (cirq != -1) {
irq = cirq;
openpic_eoi();
}
} else if (irq == OPENPIC_VEC_SPURIOUS)
irq = -1;
return irq;
}
#ifdef CONFIG_SMP
void
smp_openpic_message_pass(int target, int msg, unsigned long data, int wait)
{
cpumask_t mask = CPU_MASK_ALL;
/* make sure we're sending something that translates to an IPI */
if (msg > 0x3) {
printk("SMP %d: smp_message_pass: unknown msg %d\n",
smp_processor_id(), msg);
return;
}
switch (target) {
case MSG_ALL:
openpic_cause_IPI(msg, mask);
break;
case MSG_ALL_BUT_SELF:
cpu_clear(smp_processor_id(), mask);
openpic_cause_IPI(msg, mask);
break;
default:
openpic_cause_IPI(msg, cpumask_of_cpu(target));
break;
}
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_PM
/*
* We implement the IRQ controller as a sysdev and put it
* to sleep at powerdown stage (the callback is named suspend,
* but it's old semantics, for the Device Model, it's really
* powerdown). The possible problem is that another sysdev that
* happens to be suspend after this one will have interrupts off,
* that may be an issue... For now, this isn't an issue on pmac
* though...
*/
static u32 save_ipi_vp[OPENPIC_NUM_IPI];
static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
static int openpic_suspend_count;
static void openpic_cached_enable_irq(u_int irq)
{
check_arg_irq(irq);
save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
}
static void openpic_cached_disable_irq(u_int irq)
{
check_arg_irq(irq);
save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
}
/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
* we need something better to deal with that... Maybe switch to S1 for
* cpufreq changes
*/
int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
{
int i;
unsigned long flags;
spin_lock_irqsave(&openpic_setup_lock, flags);
if (openpic_suspend_count++ > 0) {
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
openpic_set_priority(0xf);
open_pic.enable = openpic_cached_enable_irq;
open_pic.disable = openpic_cached_disable_irq;
for (i=0; i<NumProcessors; i++) {
save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
}
for (i=0; i<OPENPIC_NUM_IPI; i++)
save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
for (i=0; i<NumSources; i++) {
if (ISR[i] == 0)
continue;
save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
}
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
* we need something better to deal with that... Maybe switch to S1 for
* cpufreq changes
*/
int openpic_resume(struct sys_device *sysdev)
{
int i;
unsigned long flags;
u32 vppmask = OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
OPENPIC_MASK;
spin_lock_irqsave(&openpic_setup_lock, flags);
if ((--openpic_suspend_count) > 0) {
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
/* OpenPIC sometimes seem to need some time to be fully back up... */
do {
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
!= OPENPIC_VEC_SPURIOUS);
openpic_disable_8259_pass_through();
for (i=0; i<OPENPIC_NUM_IPI; i++)
openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
save_ipi_vp[i]);
for (i=0; i<NumSources; i++) {
if (ISR[i] == 0)
continue;
openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
/* make sure mask gets to controller before we return to user */
do {
openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
!= (save_irq_src_vp[i] & vppmask));
}
for (i=0; i<NumProcessors; i++)
openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
save_cpu_task_pri[i]);
open_pic.enable = openpic_enable_irq;
open_pic.disable = openpic_disable_irq;
openpic_set_priority(0);
spin_unlock_irqrestore(&openpic_setup_lock, flags);
return 0;
}
#endif /* CONFIG_PM */
static struct sysdev_class openpic_sysclass = {
set_kset_name("openpic"),
};
static struct sys_device device_openpic = {
.id = 0,
.cls = &openpic_sysclass,
};
static struct sysdev_driver driver_openpic = {
#ifdef CONFIG_PM
.suspend = &openpic_suspend,
.resume = &openpic_resume,
#endif /* CONFIG_PM */
};
static int __init init_openpic_sysfs(void)
{
int rc;
if (!OpenPIC_Addr)
return -ENODEV;
printk(KERN_DEBUG "Registering openpic with sysfs...\n");
rc = sysdev_class_register(&openpic_sysclass);
if (rc) {
printk(KERN_ERR "Failed registering openpic sys class\n");
return -ENODEV;
}
rc = sysdev_register(&device_openpic);
if (rc) {
printk(KERN_ERR "Failed registering openpic sys device\n");
return -ENODEV;
}
rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
if (rc) {
printk(KERN_ERR "Failed registering openpic sys driver\n");
return -ENODEV;
}
return 0;
}
subsys_initcall(init_openpic_sysfs);
