aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/ether.c
Commit message (Collapse)AuthorAge
* ENGR00320792-3 usb: gadget: mark init as late_initcallPeter Chen2014-07-04
| | | | | | | | | | | | | | | | | | | Since we introduce -EPROBE_DEFER for udc driver, it will be probed at late_initcall if it is defered. When the gadget is built in, it will return "couldn't find an available UDC" at such case. That's the problem we met at below link: http://marc.info/?l=linux-usb&m=137706435611447&w=2 We have no driver's probe at gadget driver, so we can't return -EPROBE_DEFER. And it is also not suitable to defer udc_bind_to_driver if the udc is not found temporarily, since it is hard to decide the return value for usb_gadget_probe_driver. Due to above reasons, mark gadget's init as late_initcall may be a moderate solution. Signed-off-by: Peter Chen <peter.chen@freescale.com>
* ENGR00320792-1 Revert "usb: gadget: remove __init from gadget driver bind ↵Peter Chen2014-07-04
| | | | | | | | function" This reverts commit 6d9f0704e3acf4b754188817974247c1963c1493. Signed-off-by: Peter Chen <peter.chen@freescale.com>
* usb: gadget: remove __init from gadget driver bind functionPeter Chen2014-06-26
| | | | | | | | | Since the .bind may not be called at the driver's initialization routine due to the udc is not ready, we remove __init marker for it. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> (cherry picked from commit 2f12561502a0dab918ff47dfa5bd75236817581a)
* usb: gadget: move the global the_dev variable to their usersSebastian Andrzej Siewior2013-04-03
| | | | | | | | | | | the u_ether.c file has a global variable named the_dev which keeps a pointer to the network device after it has been created via gether_setup_name(). It is only used internally by u_ether. This patches moves the variable to its users and passes it via the port.ioport where it is saved later anyway. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: remove usb_gadget_controller_number()Sebastian Andrzej Siewior2012-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bcdDevice field is defined as |Device release number in binary-coded decimal in the USB 2.0 specification. We use this field to distinguish the UDCs from each other. In theory this could be used on the host side to apply certain quirks if the "special" UDC in combination with this gadget is used. This hasn't been done as far as I am aware. In practice it would be better to fix the UDC driver before shipping since a later release might not need this quirk anymore. There are some driver in tree (on the host side) which use the bcdDevice field to figure out special workarounds for a given firmware revision. This seems to make sense. Therefore this patch converts all gadgets (except a few) to use the kernel version instead a random 2 or 3 plus the UDC number. The few that don't report kernel's version are: - webcam This one reports always a version 0x10 so allow it to do so in future. - nokia This one reports always 0x211. The comment says that this gadget works only if the UDC supports altsettings so I added a check for this. - serial This one reports 0x2400 + UDC number. Since the gadget version is 2.4 this could make sense. Therefore bcdDevice is 0x2400 here. I also remove various gadget_is_<name> macros which are unused. The remaining few macros should be moved to feature / bug bitfield. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: libcomposite: move composite.c into libcompositeSebastian Andrzej Siewior2012-09-10
| | | | | | | | | This moves composite.c into libcomposite and updates all gadgets. Finally! Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: Provide a default implementation of default manufacturer stringSebastian Andrzej Siewior2012-09-10
| | | | | | | | | | | | | | | | | Some gadgets provide custom entry here. Some may override it with an etntry that is also created by composite if there was no value sumbitted at all. This patch removes all "custom manufacturer" strings which are the same as these which are created by composite. Then it moves the creation of the default manufacturer string to usb_composite_overwrite_options() in case no command line argument has been used and the entry is still an empty string. By doing this we get rid of the global variable "composite_manufacturer" in composite. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: make sure each gadget is using same index for Product, Serial,…Sebastian Andrzej Siewior2012-09-10
| | | | | | | | | | | | | | The index in usb_string array is defined by the gadget. The gadget can choose which index entry it assigns for the serial number and which the product name. The gadget has just to ensure that the descriptor contains the proper string id which is assigned by composite. If the composite layer knows the index of the "default" information which will be overwritten by module parameters, it can be used later to overwrite it. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: push VID/PID/USB BCD module option into gadgetsSebastian Andrzej Siewior2012-09-10
| | | | | | | | | | | This patch moves the module options idVendor, idProduct and bcdDevice from composite.c into each gadgets. This ensures compatibility with current gadgets and removes the global variable which brings me step closer towards composite.c in libcomposite Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: use usb_string_ids_tab instead multiple usb_string_id()Sebastian Andrzej Siewior2012-09-10
| | | | | | | | | Using usb_string_ids_tab() instead multiple calls of usb_string_id() seems to be handy. It also allows to add string without many checks. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: libcomposite: add epautoconf.c to libcompositeSebastian Andrzej Siewior2012-09-10
| | | | | | | | This patch adds epautoconf.c into libcomposite and updates all gadgets. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: libcomposite: move config.c into libcompositeSebastian Andrzej Siewior2012-09-10
| | | | | | | | This patch moves config.c into libcomposite and updates all gadgets. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: start with libcompositeSebastian Andrzej Siewior2012-09-10
| | | | | | | | | | This patch aims to be simple. It removes #include usbstribgs.c line from each gadget and creates libcomposite.ko which has only one member, that is usbstribgs.c. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: move bind() callback back to struct usb_composite_driverSebastian Andrzej Siewior2012-09-10
| | | | | | | | | | | This partly reverts 07a18bd7 ("usb gadget: don't save bind callback in struct usb_composite_driver") and fixes new drivers. The section missmatch problems was solved by whitelisting structs in question via __ref. Cc: devel@driverdev.osuosl.org Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: push all usb_composite_driver structs into __refdataSebastian Andrzej Siewior2012-09-10
| | | | | | | | | | | | | | As it turns out, Sam's comment was better than I initially assumed. This patch pushes as struct usb_composite_driver data structures into __refdata section to avoid a section missmatch report from modpost because the ->bind() can be marked __init. The only downside is that modpost does not check between ->bind() and other member. However, it is temporary. Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-12
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* usb gadget: clean up FSF boilerplate textKlaus Schwarzkopf2011-09-09
| | | | | | | | | | | | | | | | remove the following two paragraphs as they are not needed: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc.,59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: add SS descriptors to Ethernet gadgetPaul Zimmerman2011-07-08
| | | | | | | | | | | | Add SuperSpeed descriptors to the Network USB function drivers. This has been lightly tested using a Linux host. I was able to ssh from device to host and host to device, no obvious problems seen. Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: gadget: add max_speed to usb_composite_driverTatyana Brokhman2011-07-01
| | | | | | | | | | | | | | | This field is used by the Gadget drivers to specify the maximum speed they support, meaning: the maximum speed they can provide descriptors for. The driver speed will be set in consideration of this value. [ balbi@ti.com : dropped the ifdeffery ] Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: don't save bind callback in struct usb_configurationUwe Kleine-König2010-10-22
| | | | | | | | | | | | | The bind function is most of the time only called at init time so there is no need to save a pointer to it in the configuration structure. This fixes many section mismatches reported by modpost. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [m.nazarewicz@samsung.com: updated for -next] Signed-off-by: Michał Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: don't save bind callback in struct usb_composite_driverMichal Nazarewicz2010-10-22
| | | | | | | | | | | The bind function is most of the time only called at init time so there is no need to save a pointer to it in the composite driver structure. This fixes many section mismatches reported by modpost. Signed-off-by: Michał Nazarewicz <m.nazarewicz@samsung.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Revert "USB: gadget: section mismatch warning fixed"Michal Nazarewicz2010-10-22
| | | | | | | | | | | | | This reverts a commit which proposed an invalid solution for a section mismatch. Next 3 commits will fix it correctly. Conflicts: drivers/usb/gadget/mass_storage.c Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: section mismatch warning fixedMichal Nazarewicz2010-08-10
| | | | | | | | | | | | | In may gadgets bind and bind like functions were in a init section as they were only run during initialisation. However, being callback functions they were referenced from structures in “normal” sections. Changing the tag from “__init” to “__ref” fixes the warnings. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Correct CONFIG variable typo.Robert P. J. Day2010-03-02
| | | | | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDISMichal Nazarewicz2009-12-11
| | | | | | | | | | | | | If g_ether and g_multi are both built CONFIG_USB_ETH_RNDIS symbol may be redefined in the later and, whats even worse, g_ether's settings may affect g_multi's. This adds a USB_ETH_RNDIS symbol defined at the beginning of ether.c and multi.c according toproper KConfig settings. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: Fix EEM driver comments and VID/PIDBrian Niebuhr2009-10-14
| | | | | | | Remove expository comments and fix USB VID and PID Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: Add EEM gadget driverBrian Niebuhr2009-09-23
| | | | | | | | | | | | | | | | | | This patch adds a CDC EEM ethernet gadget driver. CDC EEM is a newer USB ethernet specification that uses a simpler interface than the older CDC ECM. This makes CDC EEM usable by a wider set of USB hardware. By default the ethernet gadget will still use CDC ECM/Subset, but kernel configuration and/or a module parameter will allow alternative use of the CDC EEM protocol. Changes since last version: - Brought in missing RNDIS changes that caused compile error - Modified 'sentinel CRC' checking to match EEM host driver Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: RNDIS gadget, fix issues talking from PXADavid Brownell2009-07-12
| | | | | | | | | | | | | | | | | | The reworked Ethernet gadget has an RNDIS interop problem when used with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware, which currently has a hard time talking to MS-Windows hosts. The issue is that Microsoft requires USB_CLASS_COMM. Fix by tweaking the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS is used in some other device configuration. [ UPDATED: some "statements" were comma-terminated; fix that. ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Aric Blumer <aric@sdgsystems.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: replace uses of __constant_{endian}Harvey Harrison2009-03-24
| | | | | | | | The base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: USB_GADGET_VBUS_DRAW Kconfig optionDavid Brownell2008-10-17
| | | | | | | | | | | | | | | | | | Offer a "how much VBUS power to request" configuration option for USB gadgets that aren't using board-specific customization of their gadget or (composite) configuration drivers. Also remove a couple pointless "depends on USB_GADGET" bits from the Kconfig text; booleans inside an "if USB_GADGET" will already have that dependency. Based on a patch from Justin Clacherty. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Justin Clacherty <justin@redfish-group.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: link fixes for network gadgetDavid Brownell2008-10-16
| | | | | | | | | | | | | | Change how the Ethernet/RNDIS gadget driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". This is a bit more complicated than most of the others because it had to resolve a few symbol collisions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Rename WARN() to WARNING() to clear the namespaceArjan van de Ven2008-07-25
| | | | | | | | | | | | | We want to use WARN() as a variant of WARN_ON(), however a few drivers are using WARN() internally. This patch renames these to WARNING() to avoid the namespace clash. A few cases were defining but not using the thing, for those cases I just deleted the definition. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Greg KH <greg@kroah.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usb ethernet gadget: use composite gadget frameworkDavid Brownell2008-07-21
| | | | | | | | | | | | | | | | | | | Building on the previous patches which took code from this driver and pakaged it in more-reusable network "function" components, this patch gets rid of the original code and uses those components instead. As seen with the other gadget driver conversions, the resulting code is much easier to understand and (presumably) work with. In this case that's especially true, since the Ethernet gadget had grown to handle three (!) different Ethernet-over-USB protocols. This modularization should make it much easier to add a fourth option for the newish CDC "Ethernet Emulation Model" (or EEM). Lightly tested, primarily at full speed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: RNDIS cleanupsDavid Brownell2008-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some cleanup to the RNDIS code: - Minor bugfix: rndis_unit() is supposed to put the link into the RNDIS_UNINITIALIZED state, which does not mean "unused". There's a separate method to stop using the link. (Bug doesn't affect anything right now because of how the code is used.) - Reduce coupling between RNDIS code and its user(s), in preparation for updates in that code: * Decouple RNDIS_RESPONSE_AVAILABLE notifications from net_device by passing just a void* handle. (Also, remove the unused return value of the notification callback.) * When it needs a copy of net_device stats, just ask for it - Remove unused/untested code backing various never-used OIDs: * RNDIS_PM, RNDIS_WAKEUP ... "should" get implemented, but the relevant docs were unclear, ambguous, and incomplete. Someone with access to the Hidden Gospels (maybe in the EU?) might be able to figure out what this should do. * RNDIS_OPTIONAL_STATS ... as the name suggests, optional. Never implemented in part because not all the semantics were clear. * OID_GEN_RNDIS_CONFIG_PARAMETER, which has been #if 0 forever. - A few small whitespace fixes Plus switch the VERBOSE symbol over to the newer VERBOSE_DEBUG style. There should be no functional changes because of this patch; it's a net source code shrink (because of the dead/unused code removal) and a small object code shrink (a couple hundred bytes on ARMv5). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb dev_name() instead of dev->bus_idKay Sievers2008-07-21
| | | | | | | | The bus_id field is going away, use the dev_name() function instead. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC ↵Philipp Zabel2008-07-09
| | | | | | | | | | | | | | | | | | | | | | drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* usb: pxa27x_udc driverRobert Jarzmik2008-05-02
| | | | | | | | | | | | | | | | Adds pxa27x udc driver to support USB peripherals on pxa27x chips. The driver is compatible with: Gadget Zero, the File Storage gadget, and the Ethernet gadget (only in CDC subset mode). The driver can't properly support multiple interfaces, because of hardware bugs without possible workaround. That means no RNDIS support from g_ether, and no CDC ACM support in g_serial. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-25
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget section fixesDavid Brownell2008-04-25
| | | | | | | | | | | | Restore some section annotations: they were switched to "__devinit" while they should have been "__init", because of bogus warnings. The warnings are now fixed, so the runtime footprint of various drivers can now shrink a bit. On ARMv5, it's about 600 bytes except for the Ethernet gadget, where it can save a bit more. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: queue usb USB_CDC_GET_ENCAPSULATED_RESPONSE messageJan Altenberg2008-02-21
| | | | | | | | | | | | | | commit 0cf4f2de0a0f4100795f38ef894d4910678c74f8 introduced a bug, which prevents sending an USB_CDC_GET_ENCAPSULATED_RESPONSE message. This breaks the RNDIS initialization (especially / only Windoze machines dislike this behavior...). Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: ethernet error path potential oops fixDavid Brownell2008-02-01
| | | | | | | | | | | | Fix potential (never-observed) oops on rare error path, bugzilla #9594. Fix uses the same test as used earlier. Also make the adjacent "else" block look like an "else" block instead of hiding like a bug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h>David Brownell2007-10-12
| | | | | | | | | Move <linux/usb_gadget.h> to <linux/usb/gadget.h>, reducing some of the clutter in the main include directory. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-gadget-ether: prevent oops caused by error interrupt raceBenedikt Spranger2007-10-12
| | | | | | | | | | | | | | | | | | | | | | Fix a longstanding race in the Ethernet gadget driver, which can cause an oops on device disconnect. The fix is just to make the TX path check whether its freelist is empty. That check is otherwise not necessary, since the queue is always stopped when that list empties (and restarted when request completion puts an entry back on that freelist). The race window starts when the network code decides to transmit a packet, and ends when hard_start_xmit() grabs the freelist lock. When disconnect() is called inside that window, it shuts down the TX queue and breaks the otherwise-solid assumption that packets are never sent through a TX queue that's stopped. Signed-off-by: Benedikt Spranger <bene@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: ethernet gadget cleanups, shrinkageDavid Brownell2007-10-12
| | | | | | | | | | | | | | | | | | | | | | Clean up the ethernet gadget, using newer APIs and conventions: - gadget_is_dualspeed() and gadget_is_otg() ... #ifdef removal - Remove many now-needless #includes - Use the VERBOSE_DEBUG convention - Minor whitespace fixes. - Fix a warning from "sparse". Surprisingly, this saved about 2K of code (16%) on a fullspeed-only ARMv4 platform. I'm bit puzzled by that (it's so much!), but approve of the result. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle2007-10-10
| | | | | | | | | | | | It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* USB: "sparse" cleanups for usb gadgetsDavid Brownell2007-07-30
| | | | | | | | | | This removes complaints about the gadget stack which are generated by the currrent "sparse": it doesn't like the fact that zero is the null pointer. (Last I checked, C guarantees that's correct ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: amd5536 UDC driver (in GEODE southbridge)Thomas Dahlmann2007-07-19
| | | | | | | | | | | | Driver for the AMD5536 UDC, as found in the AMD Geode CS5536 (southbridge). This is a high speed DMA-capable controller, which can also be used in OTG configurations (which are not supported by this patch). Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: Rename husb2dev -> usbaHaavard Skinnemoen2007-07-12
| | | | | | | | | | husb2dev was the internal name of the USB Device Controller on AT32AP7000. Rename it to "atmel_usba", which is closer to the official name used in documentation and marketing material. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb gadget, dead config cleanupDavid Brownell2007-07-12
| | | | | | | | | | | Remove some dead CONFIG_ symbols, and document the status of a few others. The "gadget_chips.h" references are by and large to drivers which exist but haven't yet been submitted for merging to the main 2.6 tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: m66592-udc: peripheral controller driver for M66592Yoshihiro Shimoda2007-07-12
| | | | | | | | | | | | | | I would like to submit Renesas M66592 udc driver. The M66592 is Renesas USB 2.0 peripheral controller. This controller supports USB high-speed. The driver has been tested Gadget Zero, Ethernet Gadget, File-backed Storage Gadget, and passed usbtest script. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-09-08 09:09:40 -0400