aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi
Commit message (Collapse)AuthorAge
* iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160Emmanuel Grumbach2014-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | commit 6960a059b2c618f32fe549f13287b3d2278c09e9 upstream. We changed the timeout for the interrupt coealescing for calibration, but that wasn't effective since we changed that value back before loading the firmware. Since calibrations are notification from firmware and not Rx packets, this doesn't change anyway - the firmware will fire an interrupt straight away regardless of the interrupt coalescing value. Also, a HW issue has been discovered in 7000 devices series. The work around is to disable the new interrupt coalescing timeout feature - do this by setting bit 31 in CSR_INT_COALESCING. This has been fixed in 7265 which means that we can't rely on the device family and must have a hint in the iwl_cfg structure. Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: enable oscillator for L1 exitEmmanuel Grumbach2014-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2d93aee152b1758a94a18fe15d72153ba73b5679 upstream. Enabling the oscillator consumes slightly more power (100uA) but allows to make sure that we exit from L1 on time. Not doing so might lead to a PCIe specification violation since we might wake up from L1 at the wrong time. This issue has been identified on 3160 and 7260 only. On older NICs L1 off is not enabled, on newer NICs (7265), the issue is fixed. When the bug occurs the user sees that the NIC has disappeared from the PCI bridge, any access to the device returns 0xff. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64541 and has been extensively discussed here: http://markmail.org/thread/mfmpzqt3r333n4bo Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reported-and-tested-by: wzyboy <wzyboy@wzyboy.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix missing cleanup in .start() error pathEliad Peller2014-02-06
| | | | | | | | | | | | | | | | | commit 91b0d1198417cf4fd9a7bd4138b6909f0b359099 upstream. Cleanup of iwl_mvm_leds was missing in case of error, resulting in the following warning: WARNING: at lib/kobject.c:196 kobject_add_internal+0x1f4/0x210() kobject_add_internal failed for phy0-led with -EEXIST, don't try to register things with the same name in the same directory. which prevents further reloads of the driver. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: check sta_id/drain values in debugfsJohannes Berg2013-12-20
| | | | | | | | | | | | | | | commit 60765a47a433d54e4744c285ad127f182dcd80aa upstream. The station ID must be valid, if it's out of range then the array access may crash. Validate the station ID to the array length, and also validate the drain value even if that doesn't matter all that much. Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: dvm: don't override mac80211's queue settingEmmanuel Grumbach2013-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f6b129527ca15bae29ffb9417ddaa1c9d99ffc5d upstream. Since we set IEEE80211_HW_QUEUE_CONTROL, we can let mac80211 do the queue assignement and don't need to override its decisions. While reassiging the same values is harmless of course, it triggered a WARNING when iwlwifi and mac80211 came to different conclusions. This happened when mac80211 set IEEE80211_TX_CTL_SEND_AFTER_DTIM, but didn't route the packet to the cab_queue because no stations were asleep. iwlwifi should not override mac80211's decicions for offchannel packets and packets to be sent after DTIM, but it should override mac80211's decision for AMPDUs since we have a special queue for them. So for AMPDU, we still override info->hw_queue by the AMPDU queue. This avoids: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2531 at drivers/net/wireless/iwlwifi/dvm/tx.c:456 iwlagn_tx_skb+0x6c5/0x883() Modules linked in: CPU: 0 PID: 2531 Comm: hostapd Not tainted 3.12.0-rc5+ #1 Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013 0000000000000000 0000000000000009 ffffffff8189aa62 0000000000000000 ffffffff8105a4f2 ffff880058339a48 ffffffff815f8a04 0000000000000000 ffff8800560097b0 0000000000000208 0000000000000000 ffff8800561a9e5e Call Trace: [<ffffffff8189aa62>] ? dump_stack+0x41/0x51 [<ffffffff8105a4f2>] ? warn_slowpath_common+0x78/0x90 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff815f8a04>] ? iwlagn_tx_skb+0x6c5/0x883 [<ffffffff818a0040>] ? put_cred+0x15/0x15 [<ffffffff815f6db4>] ? iwlagn_mac_tx+0x19/0x2f [<ffffffff8186cc45>] ? __ieee80211_tx+0x226/0x29b [<ffffffff8186e6bd>] ? ieee80211_tx+0xa6/0xb5 [<ffffffff8186e98b>] ? ieee80211_monitor_start_xmit+0x1e9/0x204 [<ffffffff8171ce5f>] ? dev_hard_start_xmit+0x271/0x3ec [<ffffffff817351ac>] ? sch_direct_xmit+0x66/0x164 [<ffffffff8171d1bf>] ? dev_queue_xmit+0x1e5/0x3c8 [<ffffffff817fac5a>] ? packet_sendmsg+0xac5/0xb3d [<ffffffff81709a09>] ? sock_sendmsg+0x37/0x52 [<ffffffff810f9e0c>] ? __do_fault+0x338/0x36b [<ffffffff81713820>] ? verify_iovec+0x44/0x94 [<ffffffff81709e63>] ? ___sys_sendmsg+0x1f1/0x283 [<ffffffff81140a73>] ? __inode_wait_for_writeback+0x67/0xae [<ffffffff8111735e>] ? __cache_free.isra.46+0x178/0x187 [<ffffffff811173b1>] ? kmem_cache_free+0x44/0x84 [<ffffffff81132c22>] ? dentry_kill+0x13d/0x149 [<ffffffff81132f6f>] ? dput+0xe5/0xef [<ffffffff81136e04>] ? fget_light+0x2e/0x7c [<ffffffff8170ae62>] ? __sys_sendmsg+0x39/0x57 [<ffffffff818a7e39>] ? system_call_fastpath+0x16/0x1b ---[ end trace 1b3eb79359c1d1e6 ]--- Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: don't WARN on host commands sent when firmware is deadEmmanuel Grumbach2013-12-04
| | | | | | | | | | | | | commit 8ca95995e64f5d270889badb3e449dca91106a2b upstream. This triggers automatic bug reports and add no valuable information. Print a simple error instead and drop the host command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC seriesMatti Gottlieb2013-11-20
| | | | | | | | | | | | commit b49926629fb5c324bb1ed3960fb0d7905a4a8562 upstream. Add some new PCI IDs to the table for 7000 & 3160 series Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: add new 7260 and 3160 series device IDsOren Givon2013-11-20
| | | | | | | | | | | | commit 93fc64114b994f9ef6901697f9b0de00762680e9 upstream. Add new device IDs and configurations to support all the devices. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 seriesEmmanuel Grumbach2013-11-12
| | | | | | | | | | | commit 08a5dd3842f2ac61c6d69661d2d96022df8ae359 upstream. Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: disable L1 Active after pci_enable_deviceEmmanuel Grumbach2013-08-29
| | | | | | | | | | | | | | commit eabc4ac5d7606a57ee2b7308cb7323ea8f60183b upstream. As Arjan pointed out, we mustn't do anything related to PCI configuration until the device is properly enabled with pci_enable_device(). Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: dvm: fix calling ieee80211_chswitch_done() with NULLStanislaw Gruszka2013-08-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9186a1fd9ed190739423db84bc344d258ef3e3d7 upstream. If channel switch is pending and we remove interface we can crash like showed below due to passing NULL vif to mac80211: BUG: unable to handle kernel paging request at fffffffffffff8cc IP: [<ffffffff8130924d>] strnlen+0xd/0x40 Call Trace: [<ffffffff8130ad2e>] string.isra.3+0x3e/0xd0 [<ffffffff8130bf99>] vsnprintf+0x219/0x640 [<ffffffff8130c481>] vscnprintf+0x11/0x30 [<ffffffff81061585>] vprintk_emit+0x115/0x4f0 [<ffffffff81657bd5>] printk+0x61/0x63 [<ffffffffa048987f>] ieee80211_chswitch_done+0xaf/0xd0 [mac80211] [<ffffffffa04e7b34>] iwl_chswitch_done+0x34/0x40 [iwldvm] [<ffffffffa04f83c3>] iwlagn_commit_rxon+0x2a3/0xdc0 [iwldvm] [<ffffffffa04ebc50>] ? iwlagn_set_rxon_chain+0x180/0x2c0 [iwldvm] [<ffffffffa04e5e76>] iwl_set_mode+0x36/0x40 [iwldvm] [<ffffffffa04e5f0d>] iwlagn_mac_remove_interface+0x8d/0x1b0 [iwldvm] [<ffffffffa0459b3d>] ieee80211_do_stop+0x29d/0x7f0 [mac80211] This is because we nulify ctx->vif in iwlagn_mac_remove_interface() before calling some other functions that teardown interface. To fix just check ctx->vif on iwl_chswitch_done(). We should not call ieee80211_chswitch_done() as channel switch works were already canceled by mac80211 in ieee80211_do_stop() -> ieee80211_mgd_stop(). Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=979581 Reported-by: Lukasz Jagiello <jagiello.lukasz@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: adjust firmware D3 configuration APIJohannes Berg2013-08-29
| | | | | | | | | | | commit dfcb4c3aacedee6838e436fb575b31e138505203 upstream. The D3 firmware API changed to include a new field, adjust the driver to it to avoid getting an NMI when configuring. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: bump required firmware API version for 3160/7260Johannes Berg2013-08-29
| | | | | | | | | | | | | | commit a2d0909a687b4d250cc2b7481072e361678745ba upstream. As the firmware API has changed significantly and we don't have support code for the old APIs, bump the version to be able to release the version 7 API firmware. Unfortunately this means that the driver in 3.9 and 3.10 can't work, but that's still better than crashing the device/driver there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: unregister leds when registration failedEmmanuel Grumbach2013-08-29
| | | | | | | | | | | | commit b7327d89ae694a89f9934d428bde520b77b3131c upstream. This was missing and prevented any further attempts to load the module. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: take the seqno from packet if transmit failedEmmanuel Grumbach2013-08-29
| | | | | | | | | | | | commit ebea2f32e814445f94f9e087b646f1cf4d55fa5a upstream. The fw is unreliable in all the cases in which the packet wasn't sent. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: don't set the MCAST queue in STA's queue listEmmanuel Grumbach2013-08-29
| | | | | | | | | | | | | | commit 837fb69f10588caafc883c4473a864660e1403ce upstream. The MCAST queue should be enabled after DTIM only. According to fw API, the MCAST must not be attached to any station, but should appear in the mcast_qid of the AP's mac context only. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: properly tell the fw that a STA is awakeEmmanuel Grumbach2013-08-29
| | | | | | | | | | | commit 5af01772ee1d6e96849adf728ff837bd71b119c0 upstream. The firmware API wasn't being used correctly, fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix MCAST in AP modeEmmanuel Grumbach2013-08-29
| | | | | | | | | | | | | | | | commit 9116a3683902583a302ac5dcb283416d504d9bb4 upstream. In multicast, there is no retries nor RTS since there is no specific recipient that can ACK or send CTS. This means that we must not use the rate scale table for multicast frames. This true for any frame that doesn't have a valid ieee80211_sta pointer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: correctly configure MCAST in AP modeEmmanuel Grumbach2013-08-29
| | | | | | | | | | | | | | | | | | | | commit 86a91ec757338edbce51de5dabd7afb0366f485c upstream. The AP mode needs to use the MCAST fifo for the MCAST frames sent after the DTIM. This fifo needs to be configured with the same parameters as the VOICE FIFO. A separate SCD queue is mapped to this fifo - the cab_queue (cab stands for Content After Beacon). This queue isn't connected to any station, but rather to the MAC context. This queue should (and is already) be set as the MCAST queue - this is part of the of MAC context command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: dvm: don't send BT_CONFIG on devices w/o BluetoothJohannes Berg2013-08-11
| | | | | | | | | | | | | | | | | | commit 707aee401d2467baa785a697f40a6e2d9ee79ad5 upstream. The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: set SSID bits for passive channelsDavid Spinadel2013-08-11
| | | | | | | | | | | | | | | | | | | commit bb963c4a43eb5127eb0bbfa16c7a6a209b0af5db upstream. Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix flushing not started aggregation sessionsJohannes Berg2013-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b6658ff80c43bcf84be0bbe371c88af1452e7776 upstream. When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [<ffffffff81036492>] warn_slowpath_common+0x72/0xa0 [<ffffffff81036577>] warn_slowpath_fmt+0x47/0x50 [<ffffffffa0368d6c>] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [<ffffffffa03a2099>] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [<ffffffffa0396c43>] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [<ffffffffa0293ad3>] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [<ffffffffa0294ed8>] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [<ffffffffa029159f>] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [<ffffffffa028a686>] __sta_info_destroy+0x66/0x370 [mac80211] [<ffffffffa028abb4>] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [<ffffffffa02a3e26>] ieee80211_del_station+0x26/0x50 [mac80211] [<ffffffffa01e6395>] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: add DELL SKU for 5150 HMCEmmanuel Grumbach2013-08-11
| | | | | | | | | | | | | commit a1923f1d4723e5757cefdd60f7c7ab30e472007a upstream. This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: refuse connection to APs with BI < 16Johannes Berg2013-08-11
| | | | | | | | | | | | | | | commit 48bc13072109ea58465542aa1ee31b4e1065468a upstream. Due to a firmware bug, it crashes when the beacon interval is smaller than 16. Avoid this by refusing the station state change creating the AP station, causing mac80211 to abandon the attempt to connect to the AP, and eventually wpa_s to blacklist it. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix bug in scan ssidDavid Spinadel2013-08-11
| | | | | | | | | | | | | commit fe04e83706037802c502ea41c0d1799ec35fc0d7 upstream. Increment index in each iteration. Without this increment we are overriding the added SSIDs and we will send only the last SSId and (n_ssids - 1) broadcast probes. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: mvm: fix L2P BA ressources leakEmmanuel Grumbach2013-08-11
| | | | | | | | | | | | commit 93a426673fbfeae7fa6b27008828e2ac4c08dbee upstream. We didn't release the Rx AMPDU ressources properly. This bug led to firmware assert after 16 BA sessions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: wake the queue if stopped when being unmappedEmmanuel Grumbach2013-07-21
| | | | | | | | | | | | | | | | | | | commit 8a487b1a7432b20ff3f82387a8ce7555a964b44e upstream. When the queue is unmapped while it was so loaded that mac80211's was stopped, we need to wake the queue after having freed all the packets in the queue. Not doing so can result in weird stuff like: * run lots of traffic (mac80211's queue gets stopped) * RFKILL * de-assert RFKILL * no traffic Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: pcie: fix race in queue unmappingEmmanuel Grumbach2013-07-21
| | | | | | | | | | | | | | | | commit b967613d7e7c7bad176f5627c55e2d8c5aa2480e upstream. When a queue is disabled, it frees all its entries. Later, the op_mode might still get notifications from the firmware that triggers to free entries in the tx queue. The transport should be prepared for these races and know to ignore reclaim calls on queues that have been disabled and whose entries have been freed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iwlwifi: fix rate control regressionMoshe Benji2013-06-12
| | | | | | | | | | | | | Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. [same fix as for iwlegacy, thanks Stanislaw!] Signed-off-by: Moshe Benji <Moshe.Benji@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: mvm: correctly set the flags for BAREmmanuel Grumbach2013-06-04
| | | | | | | Somehow, the Tx flags for BAR were completely wrong. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: dvm: fix chain noise calibrationNikolay Martynov2013-06-04
| | | | | | | | | | | | | | First step of chain noise calibration process had disable flag check inverted. Chain noise calibration never started because of this. Tested on intel 5300 with two antennas attached. The driver correctly disabled one chain. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: don't print module loading error if not modularJohannes Berg2013-06-04
| | | | | | | | | | | If the opmode modules aren't modular, there's no point in printing an error message that request_module() failed. This will happen because the probe runs during iwlwifi's init and the opmode is only added during its init. Reported-by: Jörg Otte <jrg.otte@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: dvm: fix zero LQ CMD sending avoidanceEmmanuel Grumbach2013-05-27
| | | | | | | | | | | | | | | | | | In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: mvm: fix aggregation drain flowEmmanuel Grumbach2013-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the counter for non-AMPDU frames to mvm. It is needed for the drain flow which happens once the ieee80211_sta has been freed, so keeping it in iwl_mvm_sta which is embed into ieee80211_sta is not a good idea. Also, since its purpose it to remove the STA in the fw only after all the frames for this station have exited the shared Tx queues, we need to decrement it in the reclaim flow. This flow can happen after ieee80211_sta has been removed, which means that we have no iwl_mvm_sta there. So we can't know what is the vif type. Hence, we know audit these frames for all the vif types. In order to avoid spawning sta_drained_wk all the time, we now check that we are in a flow in which draining might happen - only when mvmsta is NULL. This is better than previous code that would spawn sta_drained_wk all the time in AP mode. Cc: stable@vger.kernel.org [3.9] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: mvm: Prevent setting assoc flag in MAC_CONTEXT_CMDAlexander Bondar2013-05-16
| | | | | | | | | | | | | | In the normal flow first MAC_CONTEXT_CMD for particular interface is never sent while associated. The exception is fw restart flow when resuming from suspend when WoWLAN is enabled. In this case successive "add" and "modify" MAC_CONTEXT_CMD commands may be sent with assoc flag set what cause FW mal functioning. To prevent this never set assoc flag in MAC_CONTEXT_CMD with action "add". Cc: stable@vger.kernel.org Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: mvm: tell firmware to let multicast frames inEmmanuel Grumbach2013-05-16
| | | | | | | | | | Without this command, the firmware will filter out all the multicast frames. Let them all in as for now. Later we will want to optimize this to save power. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* iwlwifi: mvm: Always use SCAN_TYPE_FORCEDIlan Peer2013-05-16
| | | | | | | | | | | | The FW AUX framework does not handle well cases where time events fail to be scheduled (and as a result issues assert 0x3330). Until a proper fix is in place, WA this by always setting the scan type to SCAN_TYPE_FORCED. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge branch 'master' of ↵John W. Linville2013-04-29
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
| * Merge branch 'for-john' of ↵John W. Linville2013-04-26
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
| | * iwlwifi: add a subdevice ID for 7000 seriesEmmanuel Grumbach2013-04-18
| | | | | | | | | | | | | | | | | | | | | Add another ID for a 7000 series device. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: dvm: don't send zeroed LQ cmdEmmanuel Grumbach2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the stations are being restored because of unassoc RXON, the LQ cmd may not have been initialized because it is initialized only after association. Sending zeroed LQ_CMD makes the fw unhappy: it raises SYSASSERT_2078. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> [move zero_lq and make static const] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: remove unneeded goto from iwl_dbgfs_log_event_readStanislaw Gruszka2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make code simpler a bit. Reported-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: mvm: remove usage of power_save module parameterAlexander Bondar2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make power management in MVM driver enabled by default and remove using the power_save module parameter. Rely only on the power_scheme parameter to decide if power management should be used. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: remove redundant argument from iwl_dump_nic_event_logStanislaw Gruszka2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | We can check buf against NULL instead of having additional bool variable. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: fix freeing uninitialized pointerStanislaw Gruszka2013-04-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If on iwl_dump_nic_event_log() error occurs before that function initialize buf, we process uninitiated pointer in iwl_dbgfs_log_event_read() and can hit "BUG at mm/slub.c:3409" Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=951241 Cc: stable@vger.kernel.org Reported-by: ian.odette@eprize.com Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: mvm: change TX/RX AM-to-PSM transition time for LP modeAlexander Bondar2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently in low power (LP) mode FW moved from active to power save mode after TX/RX completion faster than in balanced power mode (BPS). Change AM-to-PSM transition time so that it will be the same as for BPS. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: mvm: fix first_antennaEmmanuel Grumbach2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | first_antenna is supposed to return the first antenna as a 0-based bitmap: ANT_A is BIT(0), ANT_B is BIT(1), etc... Since ffs is 1 based (ffs(BIT(0)) = 1), then we had an off-by-one bug: BIT(ffs(ANT_A)) = BIT(ffs(BIT(0))) = BIT(1) = ANT_B. So what we really want is: BIT(ffs(ANT_A) - 1) = BIT(ffs(BIT(0)) - 1) = BIT(0) = ANT_A. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * iwlwifi: mvm: remove TODO which has been addressedEmmanuel Grumbach2013-04-16
| | | | | | | | | | | | | | | | | | | | | | | | Chain noise is done in the firmware and Bluetooth Coexistence is implemented now. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge branch 'master' of ↵John W. Linville2013-04-24
|\| | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
| * | Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg2013-04-22
| |\ \
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-04 03:15:59 -0400