aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/usb
Commit message (Collapse)AuthorAge
* dm9601: work around tx fifo sync issue on dm962xPeter Korsgaard2014-01-09
| | | | | | | | | | | | | | | | | | | | | | commit 4263c86dca5198da6bd3ad826d0b2304fbe25776 upstream. Certain dm962x revisions contain an bug, where if a USB bulk transfer retry (E.G. if bulk crc mismatch) happens right after a transfer with odd or maxpacket length, the internal tx hardware fifo gets out of sync causing the interface to stop working. Work around it by adding up to 3 bytes of padding to ensure this situation cannot trigger. This workaround also means we never pass multiple-of-maxpacket size skb's to usbnet, so the length adjustment to handle usbnet's padding of those can be removed. Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm9601: fix reception of full size ethernet frames on dm9620/dm9621aPeter Korsgaard2014-01-09
| | | | | | | | | | | | commit 407900cfb54bdb2cfa228010b6697305f66b2948 upstream. dm9620/dm9621a require room for 4 byte padding even in dm9601 (3 byte header) mode. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbnet: fix status interrupt urb handlingFelix Fietkau2013-12-08
| | | | | | | | | | | | | | | | | [ Upstream commit 52f48d0d9aaa621ffa5e08d79da99a3f8c93b848 ] Since commit 7b0c5f21f348a66de495868b8df0284e8dfd6bbf "sierra_net: keep status interrupt URB active", sierra_net triggers status interrupt polling before the net_device is opened (in order to properly receive the sync message response). To be able to receive further interrupts, the interrupt urb needs to be re-submitted, so this patch removes the bogus check for netif_running(). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: qmi_wwan: add new Qualcomm devicesBjørn Mork2013-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | commit 0470667caa8261beb8a9141102b04a5357dd45b5 upstream. Adding the device list from the Windows driver description files included with a new Qualcomm MDM9615 based device, "Alcatel-sbell ASB TL131 TDD LTE", from China Mobile. This device is tested and verified to work. The others are assumed to work based on using the same Windows driver. Many of these devices support multiple QMI/wwan ports, requiring multiple interface matching entries. All devices are composite, providing a mix of one or more serial, storage or Android Debug Brigde functions in addition to the wwan function. This device list included an update of one previously known device, which was incorrectly assumed to have a Gobi 2K layout. This is corrected. Reported-by: 王康 <scateu@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* dm9601: fix IFF_ALLMULTI handlingPeter Korsgaard2013-10-13
| | | | | | | | | | | | [ Upstream commit bf0ea6380724beb64f27a722dfc4b0edabff816e ] Pass-all-multicast is controlled by bit 3 in RX control, not bit 2 (pass undersized frames). Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: usb: cdc_ether: Use wwan interface for Telit modulesFabio Porcedda2013-10-01
| | | | | | | | | | commit 0092820407901a0b2c4e343e85f96bb7abfcded1 upstream. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: usb: Add HP hs2434 device to ZLP exception tableRob Gardner2013-09-14
| | | | | | | | | | | | | | | | | | | | [ Upstream commit 03803a59e32453ee5737c6096a295f748f03cc49 ] This patch adds another entry (HP hs2434 Mobile Broadband) to the list of exceptional devices that require a zero length packet in order to function properly. This list was added in commit 844e88f0. The hs2434 is manufactured by Sierra Wireless, who also produces the MC7710, which the ZLP exception list was created for in the first place. So hopefully it is just this one producer's devices that will need this workaround. Tested on a DM1-4310NR HP notebook, which does not function without this change. Signed-off-by: Rob Gardner <robmatic@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usbnet: do not pretend to support SG/TSOEric Dumazet2013-08-11
| | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 20f0170377264e8449b6987041f0bcc4d746d3ed ] usbnet doesn't support yet SG, so drivers should not advertise SG or TSO capabilities, as they allow TCP stack to build large TSO packets that need to be linearized and might use order-5 pages. This adds an extra copy overhead and possible allocation failures. Current code ignore skb_linearize() return code so crashes are even possible. Best is to not pretend SG/TSO is supported, and add this again when/if usbnet really supports SG for devices who could get a performance gain. Based on a prior patch from Freddy Xin <freddy@asix.com.tw> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* qmi_wwan: add various Novatel Gobi1K IDsDan Williams2013-06-24
| | | | | | | | | | | Found in the Windows INF files while investigating the Novatel/Verizon USB-1000 device. The USB-1000 is verified as a Gobi1K device and works with QMI after loading appropriate firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* qmi_wwan/cdc_ether: let qmi_wwan handle the Huawei E1820Bjørn Mork2013-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another QMI speaking Qualcomm based device, which should be driven by qmi_wwan, while cdc_ether should ignore it. Like on other Huawei devices, the wwan function can appear either as a single vendor specific interface or as a CDC ECM class function using separate control and data interfaces. The ECM control interface protocol is 0xff, likely in an attempt to indicate that vendor specific management is required. In addition to the near standard CDC class, Huawei also add vendor specific AT management commands to their firmwares. This is probably an attempt to support non-Windows systems using standard class drivers. Unfortunately, this part of the firmware is often buggy. Linux is much better off using whatever native vendor specific management protocol the device offers, and Windows uses, whenever possible. This means QMI in the case of Qualcomm based devices. The E1820 has been verified to work fine with QMI. Matching on interface number is necessary to distiguish the wwan function from serial functions in the single interface mode, as both function types will have class/subclass/function set to ff/ff/ff. The control interface number does not change in CDC ECM mode, so the interface number matching rule is sufficient to handle both modes. The cdc_ether blacklist entry is only relevant in CDC ECM mode, but using a similar interface number based rule helps document this as a transfer from one driver to another. Other Huawei 02/06/ff devices are left with the cdc_ether driver because we do not know whether they are based on Qualcomm chips. The Huawei specific AT command management is known to be somewhat hardware independent, and their usage of these class codes may also be independent of the modem hardware. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-05-24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "It's been a while since my last pull request so quite a few fixes have piled up." Indeed. 1) Fix nf_{log,queue} compilation with PROC_FS disabled, from Pablo Neira Ayuso. 2) Fix data corruption on some tg3 chips with TSO enabled, from Michael Chan. 3) Fix double insertion of VLAN tags in be2net driver, from Sarveshwar Bandi. 4) Don't have TCP's MD5 support pass > PAGE_SIZE page offsets in scatter-gather entries into the crypto layer, the crypto layer can't handle that. From Eric Dumazet. 5) Fix lockdep splat in 802.1Q MRP code, also from Eric Dumazet. 6) Fix OOPS in netfilter log module when called from conntrack, from Hans Schillstrom. 7) FEC driver needs to use netif_tx_{lock,unlock}_bh() rather than the non-BH disabling variants. From Fabio Estevam. 8) TCP GSO can generate out-of-order packets, fix from Eric Dumazet. 9) vxlan driver doesn't update 'used' field of fdb entries when it should, from Sridhar Samudrala. 10) ipv6 should use kzalloc() to allocate inet6 socket cork options, otherwise we can OOPS in ip6_cork_release(). From Eric Dumazet. 11) Fix races in bonding set mode, from Nikolay Aleksandrov. 12) Fix checksum generation regression added by "r8169: fix 8168evl frame padding.", from Francois Romieu. 13) ip_gre can look at stale SKB data pointer, fix from Eric Dumazet. 14) Fix checksum handling when GSO is enabled in bnx2x driver with certain chips, from Yuval Mintz. 15) Fix double free in batman-adv, from Martin Hundebøll. 16) Fix device startup synchronization with firmware in tg3 driver, from Nithin Sujit. 17) perf networking dropmonitor doesn't work at all due to mixed up trace parameter ordering, from Ben Hutchings. 18) Fix proportional rate reduction handling in tcp_ack(), from Nandita Dukkipati. 19) IPSEC layer doesn't return an error when a valid state is detected, causing an OOPS. Fix from Timo Teräs. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) be2net: bug fix on returning an invalid nic descriptor tcp: xps: fix reordering issues net: Revert unused variable changes. xfrm: properly handle invalid states as an error virtio_net: enable napi for all possible queues during open tcp: bug fix in proportional rate reduction. net: ethernet: sun: drop unused variable net: ethernet: korina: drop unused variable net: ethernet: apple: drop unused variable qmi_wwan: Added support for Cinterion's PLxx WWAN Interface perf: net_dropmonitor: Remove progress indicator perf: net_dropmonitor: Use bisection in symbol lookup perf: net_dropmonitor: Do not assume ordering of dictionaries perf: net_dropmonitor: Fix symbol-relative addresses perf: net_dropmonitor: Fix trace parameter order net: fec: use a more proper compatible string for MVF type device qlcnic: Fix updating netdev->features qlcnic: remove netdev->trans_start updates within the driver qlcnic: Return proper error codes from probe failure paths tg3: Update version to 3.132 ...
| * qmi_wwan: Added support for Cinterion's PLxx WWAN InterfaceHans-Christoph Schemmel2013-05-22
| | | | | | | | | | | | | | | | | | | | Added support for Cinterion's PLxx WWAN Interface by adding QMI_FIXED_INTF with Cinterion's Vendor ID as well as Product ID and WWAN Interface Number. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers: net: usb: rtl8150: concurrent URB bugfixPetko Manolov2013-05-20
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a potential race with concurrently running asynchronous write requests. The values for device's RX control register are now stored in dynamically allocated buffers so each URB submission has it's own copy. Doing it the old way is data clobbering prone. This patch is against latest 'net' tree. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | USB: remove remaining instances of USB_SUSPENDAlan Stern2013-05-15
|/ | | | | | | | | | Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sierra_net: keep status interrupt URB activeDan Williams2013-05-08
| | | | | | | | | | | | | | | | The driver and firmware sync up through SYNC messages, and the firmware's affirmative reply to these SYNC messages appears to be the "Reset" indication received via the status interrupt endpoint. Thus the driver needs the status interrupt endpoint always active so that the Reset indication can be received even if the netdev is closed, which is the case right after device insertion. If the Reset indication is not received by the driver, it continues sending SYNC messages to the firmware, which crashes about 10 seconds later and the device stops responding. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: allow status interrupt URB to always be activeDan Williams2013-05-08
| | | | | | | | | | | | | | | | | | | | | Some drivers (sierra_net) need the status interrupt URB active even when the device is closed, because they receive custom indications from firmware. Add functions to refcount the status interrupt URB submit/kill operation so that sub-drivers and the generic driver don't fight over whether the status interrupt URB is active or not. A sub-driver can call usbnet_status_start() at any time, but the URB is only submitted the first time the function is called. Likewise, when the sub-driver is done with the URB, it calls usbnet_status_stop() but the URB is only killed when all users have stopped it. The URB is still killed and re-submitted for suspend/resume, as before, with the same refcount it had at suspend. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams2013-05-08
| | | | | | | | | | | A rebranded Novatel E371 for AT&T's LTE bands. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/usb: new driver for RTL8152hayeswang2013-05-06
| | | | | | | | Add new driver for supporting Realtek RTL8152 Based USB 2.0 Ethernet Adapters Signed-off-by: Hayes Wang <hayeswang@realtek.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* asix: fix BUG in receive path when lowering MTUholger@eitzenberger.org2013-05-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is bug in the receive path of the asix driver at the time a packet is received larger than MTU size and DF bit set: BUG: unable to handle kernel paging request at 0000004000000001 IP: [<ffffffff8126f65b>] skb_release_head_state+0x2d/0xd2 ... Call Trace: <IRQ> [<ffffffff8126f86d>] ? skb_release_all+0x9/0x1e [<ffffffff8126f8ad>] ? __kfree_skb+0x9/0x6f [<ffffffffa00b4200>] ? asix_rx_fixup_internal+0xff/0x1ae [asix] [<ffffffffa00fb3dc>] ? usbnet_bh+0x4f/0x226 [usbnet] ... It is easily reproducable by setting an MTU of 512 e. g. and sending something like ping -s 1472 -c 1 -M do $SELF from another box. And this is because the rx->ax_skb is freed on error, but rx->ax_skb is not reset, and the size is not reset to zero in this case. And since the skb is added again to the usbnet->done skb queue it is accessing already freed memory, resulting in the BUG when freeing a 2nd time. I therefore think the value 0x0000004000000001 show in the trace is more or less random data. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qmi_wwan: Add Telewell TW-LTE 4GTeppo Kotilainen2013-05-03
| | | | | | | | | | | | | | Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: pegasus: endian bug in write_mii_word()Dan Carpenter2013-05-03
| | | | | | | | We're only passing the two high bytes of an integer. It works for little endian but not for big endian. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-05-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
| * drivers: net: usb: pegasus: fix control urb submissionPetko Manolov2013-04-29
| | | | | | | | | | | | | | | | | | | | | | | | Pegasus driver used single callback for sync and async control URBs. Special flags were employed to distinguish between both, but due to flawed logic it didn't always work. As a result of this change [get|set]_registers() are now much simpler. Async write is also leaner and does not use single, statically allocated memory for usb_ctrlrequest, which is another potential race when asynchronously submitting URBs. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers: net: usb: pegasus: read/write_mii_word optimisedPetko Manolov2013-04-29
| | | | | | | | | | | | | | | | Duplicated code in routines reading and writing MII registers is now packed in __mii_op(). Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * drivers: net: usb: pegasus: remove skb poolPetko Manolov2013-04-29
| | | | | | | | | | | | | | | | | | The socket buffer pool for the receive path is now gone. It's existence didn't make much difference (performance-wise) and the code is better off without the spinlocks protecting it. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-04-22
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: vlan: add protocol argument to packet tagging functionsPatrick McHardy2013-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy2013-04-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: cdc_ether: silence sparse __CHECK_ENDIAN__ warningBjørn Mork2013-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove warning introduced by commit 418fc57 ("usbnet: cdc-ether: apply usbnet_link_change"): CHECK .../drivers/net/usb/cdc_ether.c .../drivers/net/usb/cdc_ether.c:409:46: warning: incorrect type in argument 2 (different base types) .../drivers/net/usb/cdc_ether.c:409:46: expected bool [unsigned] [usertype] <noident> .../drivers/net/usb/cdc_ether.c:409:46: got restricted __le16 [usertype] wValue Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: handle link changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The link change is detected via the interrupt pipe, and bulk pipes are responsible for transfering packets, so it is reasonable to stop bulk transfer after link is reported as off. Two adavantages may be obtained with stopping bulk transfer after link becomes off: - USB bus bandwidth is saved(USB bus is shared bus except for USB3.0), for example, lots of 'IN' token packets and 'NYET' handshake packets is transfered on 2.0 bus. - probabaly power might be saved for usb host controller since cancelling bulk transfer may disable the asynchronous schedule of host controller. With this patch, when link becomes off, about ~10% performance boost can be found on bulk transfer of anther usb device which is attached to same bus with the usbnet device, see below test on next-20130410: - read from usb mass storage(Sandisk Extreme USB 3.0) on pandaboard with below command after unplugging ethernet cable: dd if=/dev/sda iflag=direct of=/dev/null bs=1M count=800 - without the patch 1, 838860800 bytes (839 MB) copied, 36.2216 s, 23.2 MB/s 2, 838860800 bytes (839 MB) copied, 35.8368 s, 23.4 MB/s 3, 838860800 bytes (839 MB) copied, 35.823 s, 23.4 MB/s 4, 838860800 bytes (839 MB) copied, 35.937 s, 23.3 MB/s 5, 838860800 bytes (839 MB) copied, 35.7365 s, 23.5 MB/s average: 23.6MB/s - with the patch 1, 838860800 bytes (839 MB) copied, 32.3817 s, 25.9 MB/s 2, 838860800 bytes (839 MB) copied, 31.7389 s, 26.4 MB/s 3, 838860800 bytes (839 MB) copied, 32.438 s, 25.9 MB/s 4, 838860800 bytes (839 MB) copied, 32.5492 s, 25.8 MB/s 5, 838860800 bytes (839 MB) copied, 31.6178 s, 26.5 MB/s average: 26.1MB/s Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | Use usbnet_link_change to handle link change centrally. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: sierra: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | Use usbnet_link_change to handle link change centrally. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: dm9601: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use usbnet_link_change to handle link change centrally. Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: cdc-ether: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | Use usbnet_link_change to handle link change centrally. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: ax88179_1781: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | Use usbnet_link_change to handle link change centrally. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: asix: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | Use usbnet_link_change to handle link change centrally. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: cdc_ncm: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | Use the introduced usbnet_link_change to handle link change. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: mcs7830: apply usbnet_link_changeMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | This patch uses the introduced usbnet_link_change() to handle link change. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: mcs7830: don't reset linkMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't implement link_reset() callback, so it needn't to send link reset event. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | usbnet: introduce usbnet_link_change APIMing Lei2013-04-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the API of usbnet_link_change, so that usbnet can handle link change centrally, which may help to implement killing traffic URBs for saving USB bus bandwidth and host controller power. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: cdc_ncm: demote "unexpected notification" to debug levelBjørn Mork2013-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Receiving unhandled notifications is most certainly not an error and should not be logged as one. Knowing that the device sends notifications we don't handle is useful for developers, but there is very little a user can do about this. The message is therefore just annoying noise to most users with devices sending unhandled notifications like e.g. USB_CDC_NOTIFY_RESPONSE_AVAILABLE Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-04-01
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | cdc_ncm: return -ENOMEM if kzalloc failsDevendra Naga2013-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return -ENOMEM instead if kzalloc of cdc_ncm_ctx structure is failed. and also remove the comparision of ctx structure with NULL and make it as !ctx. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds2013-04-29
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
| * \ \ \ Merge 3.9-rc6 into usb-nextGreg Kroah-Hartman2013-04-08
| |\ \ \ \ | | | |/ / | | |/| | | | | | | | | | | | | | | | | We want the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usbnet: smsc75xx: don't recover device if suspend fails in system sleepMing Lei2013-03-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch doesn't recover device under this situation. Also add comments on this case. Acked-by: David S. Miller <davem@davemloft.net> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usbnet: smsc95xx: don't recover device if suspend fails in system sleepMing Lei2013-03-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch doesn't recover device under this situation. Also add comments on the case. Acked-by: David S. Miller <davem@davemloft.net> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usbnet: qmi_wwan: comments on suspend failureMing Lei2013-03-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch comments on the case and requires that both usbnet_suspend() and subdriver->suspend() MUST return 0 in system sleep context. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usbnet: cdc_mbim: comments on suspend failureMing Lei2013-03-25
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch comments on the case and requires that both usbnet_suspend() and subdriver->suspend() MUST return 0 in system sleep context. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds2013-04-29
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-13 01:22:17 -0400