aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAge
* ENGR00313685-4 of/irq: Refactor interrupt-map parsingGrant Likely2014-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2361613206e66ce59cc0e08efa8d98ec15b84ed1 upstream. All the users of of_irq_parse_raw pass in a raw interrupt specifier from the device tree and expect it to be returned (possibly modified) in an of_phandle_args structure. However, the primary function of of_irq_parse_raw() is to check for translations due to the presence of one or more interrupt-map properties. The actual placing of the data into an of_phandle_args structure is trivial. If it is refactored to accept an of_phandle_args structure directly, then it becomes possible to consume of_phandle_args from other sources. This is important for an upcoming patch that allows a device to be connected to more than one interrupt parent. It also simplifies the code a bit. The biggest complication with this patch is that the old version works on the interrupt specifiers in __be32 form, but the of_phandle_args structure is intended to carry it in the cpu-native version. A bit of churn was required to make this work. In the end it results in tighter code, so the churn is worth it. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Conflicts: drivers/of/irq.c
* ENGR00313685-3 of/irq: simplify args to irq_create_of_mappingGrant Likely2014-05-16
| | | | | | | | | | | | | | | | | | | | | | | commit e6d30ab1e7d1281784672c0fc2ffa385cfb7279e upstream. All the callers of irq_create_of_mapping() pass the contents of a struct of_phandle_args structure to the function. Since all the callers already have an of_phandle_args pointer, why not pass it directly to irq_create_of_mapping()? Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Conflicts: arch/arm/mach-integrator/pci_v3.c arch/mips/pci/pci-rt3883.c kernel/irq/irqdomain.c
* ENGR00313685-2 of/irq: Replace of_irq with of_phandle_argsGrant Likely2014-05-16
| | | | | | | | | | | | | | | | | | | | | commit 530210c7814e83564c7ca7bca8192515042c0b63 upstream. struct of_irq and struct of_phandle_args are exactly the same structure. This patch makes the kernel use of_phandle_args everywhere. This in itself isn't a big deal, but it makes some follow-on patches simpler. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Conflicts: arch/arm/mach-integrator/pci_v3.c arch/mips/pci/pci-rt3883.c include/linux/of_irq.h
* ENGR00313685-1 of/irq: Rename of_irq_map_* functions to of_irq_parse_*Grant Likely2014-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0c02c8007ea5554d028f99fd3e29fc201fdeeab3 upstream. The OF irq handling code has been overloading the term 'map' to refer to both parsing the data in the device tree and mapping it to the internal linux irq system. This is probably because the device tree does have the concept of an 'interrupt-map' function for translating interrupt references from one node to another, but 'map' is still confusing when the primary purpose of some of the functions are to parse the DT data. This patch renames all the of_irq_map_* functions to of_irq_parse_* which makes it clear that there is a difference between the parsing phase and the mapping phase. Kernel code can make use of just the parsing or just the mapping support as needed by the subsystem. The patch was generated mechanically with a handful of sed commands. Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Conflicts: arch/arm/mach-integrator/pci_v3.c arch/mips/pci/pci-rt3883.c drivers/of/irq.c
* PCI: use weak functions for MSI arch-specific functionsThomas Petazzoni2014-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, the MSI architecture-specific functions could be overloaded using a fairly complex set of #define and compile-time conditionals. In order to prepare for the introduction of the msi_chip infrastructure, it is desirable to switch all those functions to use the 'weak' mechanism. This commit converts all the architectures that were overidding those MSI functions to use the new strategy. Note that we keep two separate, non-weak, functions default_teardown_msi_irqs() and default_restore_msi_irqs() for the default behavior of the arch_teardown_msi_irqs() and arch_restore_msi_irqs(), as the default behavior is needed by x86 PCI code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: linux-ia64@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* powerpc: Make sure "cache" directory is removed when offlining cpuPaul Mackerras2014-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 91b973f90c1220d71923e7efe1e61f5329806380 upstream. The code in remove_cache_dir() is supposed to remove the "cache" subdirectory from the sysfs directory for a CPU when that CPU is being offlined. It tries to do this by calling kobject_put() on the kobject for the subdirectory. However, the subdirectory only gets removed once the last reference goes away, and the reference being put here may well not be the last reference. That means that the "cache" subdirectory may still exist when the offlining operation has finished. If the same CPU subsequently gets onlined, the code tries to add a new "cache" subdirectory. If the old subdirectory has not yet been removed, we get a WARN_ON in the sysfs code, with stack trace, and an error message printed on the console. Further, we ultimately end up with an online cpu with no "cache" subdirectory. This fixes it by doing an explicit kobject_del() at the point where we want the subdirectory to go away. kobject_del() removes the sysfs directory even though the object still exists in memory. The object will get freed at some point in the future. A subsequent onlining operation can create a new sysfs directory, even if the old object still exists in memory, without causing any problems. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix the setup of CPU-to-Node mappings during CPU onlineSrivatsa S. Bhat2014-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d4edc5b6c480a0917e61d93d55531d7efa6230be upstream. On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* KVM: PPC: e500: Fix bad address type in deliver_tlb_misss()Mihai Caraman2014-02-06
| | | | | | | | | | | commit 70713fe315ed14cd1bb07d1a7f33e973d136ae3d upstream. Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss(). Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* KVM: PPC: Book3S HV: use xics_wake_cpu only when definedAndreas Schwab2014-02-06
| | | | | | | | | commit 48eaef0518a565d3852e301c860e1af6a6db5a84 upstream. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bpf: do not use reciprocal divideEric Dumazet2014-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit aee636c4809fa54848ff07a899b326eb1f9987a2 ] At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Align p_endAnton Blanchard2014-01-09
| | | | | | | | | | | | | | | | commit 286e4f90a72c0b0621dde0294af6ed4b0baddabb upstream. p_end is an 8 byte value embedded in the text section. This means it is only 4 byte aligned when it should be 8 byte aligned. Fix this by adding an explicit alignment. This fixes an issue where POWER7 little endian builds with CONFIG_RELOCATABLE=y fail to boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix bad stack check in exception entryMichael Neuling2014-01-09
| | | | | | | | | | | | | | | | | | | | | | | commit 90ff5d688e61f49f23545ffab6228bd7e87e6dc7 upstream. In EXCEPTION_PROLOG_COMMON() we check to see if the stack pointer (r1) is valid when coming from the kernel. If it's not valid, we die but with a nice oops message. Currently we allocate a stack frame (subtract INT_FRAME_SIZE) before we check to see if the stack pointer is negative. Unfortunately, this won't detect a bad stack where r1 is less than INT_FRAME_SIZE. This patch fixes the check to compare the modified r1 with -INT_FRAME_SIZE. With this, bad kernel stack pointers (including NULL pointers) are correctly detected again. Kudos to Paulus for finding this. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: kvm: fix rare but potential deadlock scenepingfan liu2014-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 91648ec09c1ef69c4d840ab6dab391bfb452d554 upstream. Since kvmppc_hv_find_lock_hpte() is called from both virtmode and realmode, so it can trigger the deadlock. Suppose the following scene: Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of vcpus. If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be caught in realmode for a long time. What makes things even worse if the following happens, On cpuM, bitlockX is hold, on cpuN, Y is hold. vcpu_B_2 try to lock Y on cpuM in realmode vcpu_A_2 try to lock X on cpuN in realmode Oops! deadlock happens Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix PTE page address mismatch in pgtable ctor/dtorHong H. Pham2013-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cf77ee54362a245f9a01f240adce03a06c05eb68 upstream. In pte_alloc_one(), pgtable_page_ctor() is passed an address that has not been converted by page_address() to the newly allocated PTE page. When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor() with an address to the PTE page that has been converted by page_address(). The mismatch in the PTE's page address causes pgtable_page_dtor() to access invalid memory, so resources for that PTE (such as the page lock) is not properly cleaned up. On PPC32, only SMP kernels are affected. On PPC64, only SMP kernels with 4K page size are affected. This bug was introduced by commit d614bb041209fd7cb5e4b35e11a7b2f6ee8f62b8 "powerpc: Move the pte free routines from common header". On a preempt-rt kernel, a spinlock is dynamically allocated for each PTE in pgtable_page_ctor(). When the PTE is freed, calling pgtable_page_dtor() with a mismatched page address causes a memory leak, as the pointer to the PTE's spinlock is bogus. On mainline, there isn't any immediately obvious symptoms, but the problem still exists here. Fixes: d614bb041209fd7c "powerpc: Move the pte free routes from common header" Cc: Paul Mackerras <paulus@samba.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/signals: Improved mark VSX not saved with small contexts fixMichael Neuling2013-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ec67ad82814bee92251fd963bf01c7a173856555 upstream. In a recent patch: commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42 Author: Michael Neuling <mikey@neuling.org> powerpc/signals: Mark VSX not saved with small contexts We fixed an issue but an improved solution was later discussed after the patch was merged. Firstly, this patch doesn't handle the 64bit signals case, which could also hit this issue (but has never been reported). Secondly, the original patch isn't clear what MSR VSX should be set to. The new approach below always clears the MSR VSX bit (to indicate no VSX is in the context) and sets it only in the specific case where VSX is available (ie. when VSX has been used and the signal context passed has space to provide the state). This reverts the original patch and replaces it with the improved solution. It also adds a 64 bit version. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/signals: Mark VSX not saved with small contextsMichael Neuling2013-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42 upstream. The VSX MSR bit in the user context indicates if the context contains VSX state. Currently we set this when the process has touched VSX at any stage. Unfortunately, if the user has not provided enough space to save the VSX state, we can't save it but we currently still set the MSR VSX bit. This patch changes this to clear the MSR VSX bit when the user doesn't provide enough space. This indicates that there is no valid VSX state in the user context. This is needed to support get/set/make/swapcontext for applications that use VSX but only provide a small context. For example, getcontext in glibc provides a smaller context since the VSX registers don't need to be saved over the glibc function call. But since the program calling getcontext may have used VSX, the kernel currently says the VSX state is valid when it's not. If the returned context is then used in setcontext (ie. a small context without VSX but with MSR VSX set), the kernel will refuse the context. This situation has been reported by the glibc community. Based on patch from Carlos O'Donell. Tested-by: Haren Myneni <haren@linux.vnet.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: ppc64 address space capped at 32TB, mmap randomisation disabledAnton Blanchard2013-11-29
| | | | | | | | | | | | | | | | | | | | commit 5a049f14902982c26538250bdc8d54156d357252 upstream. Commit fba2369e6ceb (mm: use vm_unmapped_area() on powerpc architecture) has a bug in slice_scan_available() where we compare an unsigned long (high_slices) against a shifted int. As a result, comparisons against the top 32 bits of high_slices (representing the top 32TB) always returns 0 and the top of our mmap region is clamped at 32TB This also breaks mmap randomisation since the randomised address is always up near the top of the address space and it gets clamped down to 32TB. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michel Lespinasse <walken@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/powernv: Add PE to its own PELTVGavin Shan2013-11-29
| | | | | | | | | | | | | | | commit 631ad691b5818291d89af9be607d2fe40be0886e upstream. We need add PE to its own PELTV. Otherwise, the errors originated from the PE might contribute to other PEs. In the result, we can't clear up the error successfully even we're checking and clearing errors during access to PCI config space. Reported-by: kalshett@in.ibm.com Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/vio: use strcpy in modalias_showPrarit Bhargava2013-11-29
| | | | | | | | | | | | | | commit 411cabf79e684171669ad29a0628c400b4431e95 upstream. Commit e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 used strcat instead of strcpy which can result in an overflow of newlines on the buffer. Signed-off-by: Prarit Bhargava Cc: benh@kernel.crashing.org Cc: ben@decadent.org.uk Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/52xx: fix build breakage for MPC5200 LPBFIFO moduleAnatolij Gustschin2013-11-29
| | | | | | | | | | | | commit 2bf75084f6d9f9a91ba6e30a501ff070d8a1acf6 upstream. The MPC5200 LPBFIFO driver requires the bestcomm module to be enabled, otherwise building will fail. Fix it. Reported-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* compiler/gcc4: Add quirk for 'asm goto' miscompilation bugIngo Molnar2013-10-18
| | | | | | | | | | | | | | | | | | | | | | | | commit 3f0116c3238a96bc18ad4b4acefe4e7be32fa861 upstream. Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto' constructs, as outlined here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Implement a workaround suggested by Jakub Jelinek. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Suggested-by: Jakub Jelinek <jakub@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20131015062351.GA4666@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* KVM: PPC: Book3S HV: Fix typo in saving DSCRPaul Mackerras2013-10-18
| | | | | | | | | | | | | | | | commit cfc860253abd73e1681696c08ea268d33285a2c4 upstream. This fixes a typo in the code that saves the guest DSCR (Data Stream Control Register) into the kvm_vcpu_arch struct on guest exit. The effect of the typo was that the DSCR value was saved in the wrong place, so changes to the DSCR by the guest didn't persist across guest exit and entry, and some host kernel memory got corrupted. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Restore registers on error exit from csum_partial_copy_generic()Paul E. McKenney2013-10-13
| | | | | | | | | | | | | | | | | | commit 8f21bd0090052e740944f9397e2be5ac7957ded7 upstream. The csum_partial_copy_generic() function saves the PowerPC non-volatile r14, r15, and r16 registers for the main checksum-and-copy loop. Unfortunately, it fails to restore them upon error exit from this loop, which results in silent corruption of these registers in the presumably rare event of an access exception within that loop. This commit therefore restores these register on error exit from the loop. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/sysfs: Disable writing to PURR in guest modeMadhavan Srinivasan2013-10-13
| | | | | | | | | | | | | commit d1211af3049f4c9c1d8d4eb8f8098cc4f4f0d0c7 upstream. arch/powerpc/kernel/sysfs.c exports PURR with write permission. This may be valid for kernel in phyp mode. But writing to the file in guest mode causes crash due to a priviledge violation Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix parameter clobber in csum_partial_copy_generic()Paul E. McKenney2013-10-13
| | | | | | | | | | | | | | | | | commit d9813c3681a36774b254c0cdc9cce53c9e22c756 upstream. The csum_partial_copy_generic() uses register r7 to adjust the remaining bytes to process. Unfortunately, r7 also holds a parameter, namely the address of the flag to set in case of access exceptions while reading the source buffer. Lacking a quantum implementation of PowerPC, this commit instead uses register r9 to do the adjusting, leaving r7's pointer uncorrupted. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/vio: Fix modalias_show return valuesPrarit Bhargava2013-10-13
| | | | | | | | | | | | | | | | | | | | commit e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 upstream. modalias_show() should return an empty string on error, not -ENODEV. This causes the following false and annoying error: > find /sys/devices -name modalias -print0 | xargs -0 cat >/dev/null cat: /sys/devices/vio/4000/modalias: No such device cat: /sys/devices/vio/4001/modalias: No such device cat: /sys/devices/vio/4002/modalias: No such device cat: /sys/devices/vio/4004/modalias: No such device cat: /sys/devices/vio/modalias: No such device Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/tm: Switch out userspace PPR and DSCR soonerMichael Neuling2013-10-13
| | | | | | | | | | | | | | | | | | | | | commit e9bdc3d6143d1c4b8d8ce5231fc958268331f983 upstream. When we do a treclaim or trecheckpoint we end up running with userspace PPR and DSCR values. Currently we don't do anything special to avoid running with user values which could cause a severe performance degradation. This patch moves the PPR and DSCR save and restore around treclaim and trecheckpoint so that we run with user values for a much shorter period. More care is taken with the PPR as it's impact is greater than the DSCR. This is similar to user exceptions, where we run HTM_MEDIUM early to ensure that we don't run with a userspace PPR values in the kernel. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/perf: Fix handling of FAB eventsMichael Ellerman2013-10-13
| | | | | | | | | | | | | | | | | | | | | | | commit a53b27b3abeef406de92a2bb0ceb6fb4c3fb8fc4 upstream. Commit 4df4899 "Add power8 EBB support" included a bug in the handling of the FAB_CRESP_MATCH and FAB_TYPE_MATCH fields. These values are pulled out of the event code using EVENT_THR_CTL_SHIFT, however we were then or'ing that value directly into MMCR1. This meant we were failing to set the FAB fields correctly, and also potentially corrupting the value for PMC4SEL. Leading to no counts for the FAB events and incorrect counts for PMC4. The fix is simply to shift left the FAB value correctly before or'ing it with MMCR1. Reported-by: Sooraj Ravindran Nair <soonair3@in.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/iommu: Use GFP_KERNEL instead of GFP_ATOMIC in iommu_init_table()Nishanth Aravamudan2013-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1cf389df090194a0976dc867b7fffe99d9d490cb upstream. Under heavy (DLPAR?) stress, we tripped this panic() in arch/powerpc/kernel/iommu.c::iommu_init_table(): page = alloc_pages_node(nid, GFP_ATOMIC, get_order(sz)); if (!page) panic("iommu_init_table: Can't allocate %ld bytes\n", sz); Before the panic() we got a page allocation failure for an order-2 allocation. There appears to be memory free, but perhaps not in the ATOMIC context. I looked through all the call-sites of iommu_init_table() and didn't see any obvious reason to need an ATOMIC allocation. Most call-sites in fact have an explicit GFP_KERNEL allocation shortly before the call to iommu_init_table(), indicating we are not in an atomic context. There is some indirection for some paths, but I didn't see any locks indicating that GFP_KERNEL is inappropriate. With this change under the same conditions, we have not been able to reproduce the panic. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* KVM: PPC: Book3S: Fix compile error in XICS emulationPaul Mackerras2013-09-26
| | | | | | | | | | | | | | | | | commit 7bfa9ad55d691f2b836b576769b11eca2cf50816 upstream. Commit 8e44ddc3f3 ("powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation") added a call to get_tb() but didn't include the header that defines it, and on some configs this means book3s_xics.c fails to compile: arch/powerpc/kvm/book3s_xics.c: In function ‘kvmppc_xics_hcall’: arch/powerpc/kvm/book3s_xics.c:812:3: error: implicit declaration of function ‘get_tb’ [-Werror=implicit-function-declaration] Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Default arch idle could cede processor on pseriesVaidyanathan Srinivasan2013-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 363edbe2614aa90df706c0f19ccfa2a6c06af0be upstream. When adding cpuidle support to pSeries, we introduced two regressions: - The new cpuidle backend driver only works under hypervisors supporting the "SLPLAR" option, which isn't the case of the old POWER4 hypervisor and the HV "light" used on js2x blades - The cpuidle driver registers fairly late, meaning that for a significant portion of the boot process, we end up having all threads spinning. This slows down the boot process and increases the overall resource usage if the hypervisor has shared processors. This fixes both by implementing a "default" idle that will cede to the hypervisor when possible, in a very simple way without all the bells and whisles of cpuidle. Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Handle unaligned ldbrx/stdbrxAnton Blanchard2013-09-26
| | | | | | | | | | | | | | | | | | | | | | | | commit 230aef7a6a23b6166bd4003bfff5af23c9bd381f upstream. Normally when we haven't implemented an alignment handler for a load or store instruction the process will be terminated. The alignment handler uses the DSISR (or a pseudo one) to locate the right handler. Unfortunately ldbrx and stdbrx overlap lfs and stfs so we incorrectly think ldbrx is an lfs and stdbrx is an stfs. This bug is particularly nasty - instead of terminating the process we apply an incorrect fixup and continue on. With more and more overlapping instructions we should stop creating a pseudo DSISR and index using the instruction directly, but for now add a special case to catch ldbrx/stdbrx. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Don't Oops when accessing /proc/powerpc/lparcfg without hypervisorBenjamin Herrenschmidt2013-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | commit f5f6cbb61610b7bf9d9d96db9c3979d62a424bab upstream. /proc/powerpc/lparcfg is an ancient facility (though still actively used) which allows access to some informations relative to the partition when running underneath a PAPR compliant hypervisor. It makes no sense on non-pseries machines. However, currently, not only can it be created on these if the kernel has pseries support, but accessing it on such a machine will crash due to trying to do hypervisor calls. In fact, it should also not do HV calls on older pseries that didn't have an hypervisor either. Finally, it has the plumbing to be a module but is a "bool" Kconfig option. This fixes the whole lot by turning it into a machine_device_initcall that is only created on pseries, and adding the necessary hypervisor check before calling the H_GET_EM_PARMS hypercall Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Work around gcc miscompilation of __pa() on 64-bitPaul Mackerras2013-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | commit bdbc29c19b2633b1d9c52638fb732bcde7a2031a upstream. On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/tm: Fix context switching TAR, PPR and DSCR SPRsMichael Neuling2013-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 28e61cc466d8daace4b0f04ba2b83e0bd68f5832 upstream. If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Save the TAR register earlierMichael Neuling2013-08-15
| | | | | | | | | | | | | | | | | commit c2d52644e2da8a07ecab5ca62dd0bc563089e8dc upstream. This moves us to save the Target Address Register (TAR) a earlier in __switch_to. It introduces a new function save_tar() to do this. We need to save the TAR earlier as we will overwrite it in the transactional memory reclaim/recheckpoint path. We are going to do this in a subsequent patch which will fix saving the TAR register when it's modified inside a transaction. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix context switch DSCR on POWER8Michael Neuling2013-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | commit 2517617e0de65f8f7cfe75cae745d06b1fa98586 upstream. POWER8 allows the DSCR to be accessed directly from userspace via a new SPR number 0x3 (Rather than 0x11. DSCR SPR number 0x11 is still used on POWER8 but like POWER7, is only accessible in HV and OS modes). Currently, we allow this by setting H/FSCR DSCR bit on boot. Unfortunately this doesn't work, as the kernel needs to see the DSCR change so that it knows to no longer restore the system wide version of DSCR on context switch (ie. to set thread.dscr_inherit). This clears the H/FSCR DSCR bit initially. If a process then accesses the DSCR (via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in facility_unavailable_exception(). We also change _switch() so that we set or clear the H/FSCR DSCR bit based on the thread.dscr_inherit. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Rework setting up H/FSCR bit definitionsMichael Neuling2013-08-15
| | | | | | | | | | | | | | | commit 74e400cee6c0266ba2d940ed78d981f1e24a8167 upstream. This reworks the Facility Status and Control Regsiter (FSCR) config bit definitions so that we can access the bit numbers. This is needed for a subsequent patch to fix the userspace DSCR handling. HFSCR and FSCR bit definitions are the same, so reuse them. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Fix hypervisor facility unavaliable vector numberMichael Neuling2013-08-15
| | | | | | | | | | | | | | | | | | commit 88f094120bd2f012ff494ae50a8d4e0d8af8f69e upstream. Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we mark it as an OS facility unavaliable (0xf60) as the two share the same code path. The becomes a problem in facility_unavailable_exception() as we aren't able to see the hypervisor facility unavailable exceptions. Below fixes this by duplication the required macros. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: On POWERNV enable PPC_DENORMALISATION by defaultAnton Blanchard2013-08-15
| | | | | | | | | | | | | commit 4e90a2a7375e86827541bda9393414c03e7721c6 upstream. We want PPC_DENORMALISATION enabled when POWERNV is enabled, so update the Kconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: VPHN topology change updates all siblingsRobert Jennings2013-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3be7db6ab45b21345386d1a466da133b19cde5e4 upstream. When an associativity level change is found for one thread, the siblings threads need to be updated as well. This is done today for PRRN in stage_topology_update() but is missing for VPHN in update_cpu_associativity_changes_mask(). This patch will correctly update all thread siblings during a topology change. Without this patch a topology update can result in a CPU in init_sched_groups_power() getting stuck indefinitely in a loop. This loop is built in build_sched_groups(). As a result of the thread moving to a node separate from its siblings the struct sched_group will have its next pointer set to point to itself rather than the sched_group struct of the next thread. This happens because we have a domain without the SD_OVERLAP flag, which is correct, and a topology that doesn't conform with reality (threads on the same core assigned to different numa nodes). When this list is traversed by init_sched_groups_power() it will reach the thread's sched_group structure and loop indefinitely; the cpu will be stuck at this point. The bug was exposed when VPHN was enabled in commit b7abef0 (v3.9). Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/modules: Module CRC relocation fix causes perf issuesAnton Blanchard2013-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0e0ed6406e61434d3f38fb58aa8464ec4722b77e upstream. Module CRCs are implemented as absolute symbols that get resolved by a linker script. We build an intermediate .o that contains an unresolved symbol for each CRC. genksysms parses this .o, calculates the CRCs and writes a linker script that "resolves" the symbols to the calculated CRC. Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols that need relocating and relocates them at boot. Commit d4703aef (module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y) added a hook to reverse the bogus relocations. Part of this patch created a symbol at 0x0: # head -2 /proc/kallsyms 0000000000000000 T reloc_start c000000000000000 T .__start This reloc_start symbol is causing lots of confusion to perf. It thinks reloc_start is a massive function that stretches from 0x0 to 0xc000000000000000 and we get various cryptic errors out of perf, including: problem incrementing symbol count, skipping event This patch removes the reloc_start linker script label and instead defines it as PHYSICAL_START. We also need to wrap it with CONFIG_PPC64 because the ppc32 kernel can set a non zero PHYSICAL_START at compile time and we wouldn't want to subtract it from the CRCs in that case. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/perf: Don't enable if we have zero eventsMichael Ellerman2013-07-25
| | | | | | | | | | | | | commit 4ea355b5368bde0574c12430df53334c4be3bdcf upstream. In power_pmu_enable() we still enable the PMU even if we have zero events. This should have no effect but doesn't make much sense. Instead just return after telling the hypervisor that we are not using the PMCs. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/perf: Use existing out label in power_pmu_enable()Michael Ellerman2013-07-25
| | | | | | | | | | | | commit 0a48843d6c5114cfa4a9540ee4d6af87628cec01 upstream. In power_pmu_enable() we can use the existing out label to reduce the number of return paths. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/perf: Freeze PMC5/6 if we're not using themMichael Ellerman2013-07-25
| | | | | | | | | | | | | | | commit 7a7a41f9d5b28ac3a916b057a7d3cd3f435ee9a6 upstream. On Power8 we can freeze PMC5 and 6 if we're not using them. Normally they run all the time. As noticed by Anshuman, we should unfreeze them when we disable the PMU as there are legacy tools which expect them to run all the time. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/perf: Rework disable logic in pmu_disable()Michael Ellerman2013-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 378a6ee99e4a431ec84e4e61893445c041c93007 upstream. In pmu_disable() we disable the PMU by setting the FC (Freeze Counters) bit in MMCR0. In order to do this we have to read/modify/write MMCR0. It's possible that we read a value from MMCR0 which has PMAO (PMU Alert Occurred) set. When we write that value back it will cause an interrupt to occur. We will then end up in the PMU interrupt handler even though we are supposed to have just disabled the PMU. We can avoid this by making sure we never write PMAO back. We should not lose interrupts because when the PMU is re-enabled the overflowed values will cause another interrupt. We also reorder the clearing of SAMPLE_ENABLE so that is done after the PMU is frozen. Otherwise there is a small window between the clearing of SAMPLE_ENABLE and the setting of FC where we could take an interrupt and incorrectly see SAMPLE_ENABLE not set. This would for example change the logic in perf_read_regs(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/perf: Check that events only include valid bits on Power8Michael Ellerman2013-07-25
| | | | | | | | | | | | | | | | | | commit d8bec4c9cd58f6d3679e09b7293851fb92ad7557 upstream. A mistake we have made in the past is that we pull out the fields we need from the event code, but don't check that there are no unknown bits set. This means that we can't ever assign meaning to those unknown bits in future. Although we have once again failed to do this at release, it is still early days for Power8 so I think we can still slip this in and get away with it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/numa: Do not update sysfs cpu registration from invalid contextNathan Fontenot2013-07-25
| | | | | | | | | | | | | | | commit dd023217e17e72b46fb4d49c7734c426938c3dba upstream. The topology update code that updates the cpu node registration in sysfs should not be called while in stop_machine(). The register/unregister calls take a lock and may sleep. This patch moves these calls outside of the call to stop_machine(). Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/smp: Section mismatch from smp_release_cpus to __initdata ↵Chen Gang2013-07-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spinning_secondaries commit 8246aca7058f3f2c2ae503081777965cd8df7b90 upstream. the smp_release_cpus is a normal funciton and called in normal environments, but it calls the __initdata spinning_secondaries. need modify spinning_secondaries to match smp_release_cpus. the related warning: (the linker report boot_paca.33377, but it should be spinning_secondaries) ----------------------------------------------------------------------------- WARNING: arch/powerpc/kernel/built-in.o(.text+0x23176): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377 The function .smp_release_cpus() references the variable __initdata boot_paca.33377. This is often because .smp_release_cpus lacks a __initdata annotation or the annotation of boot_paca.33377 is wrong. WARNING: arch/powerpc/kernel/built-in.o(.text+0x231fe): Section mismatch in reference from the function .smp_release_cpus() to the variable .init.data:boot_paca.33377 The function .smp_release_cpus() references the variable __initdata boot_paca.33377. This is often because .smp_release_cpus lacks a __initdata annotation or the annotation of boot_paca.33377 is wrong. ----------------------------------------------------------------------------- Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc: Wire up the HV facility unavailable exceptionMichael Ellerman2013-07-25
| | | | | | | | | | | | | | | commit b14b6260efeee6eb8942c6e6420e31281892acb6 upstream. Similar to the facility unavailble exception, except the facilities are controlled by HFSCR. Adapt the facility_unavailable_exception() so it can be called for either the regular or Hypervisor facility unavailable exceptions. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-02 17:06:42 -0400