6 files changed, 22 insertions, 21 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 717ebc9ff941..600d82348511 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -264,7 +264,7 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
                 ret = -ENODEV;
                 goto err0;
         }
-        dwc->revision = reg & DWC3_GSNPSREV_MASK;
+        dwc->revision = reg;
 
         dwc3_core_soft_reset(dwc);
 
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 8efe0fa9228d..1ed56d8492d7 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1748,7 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 
         /* rm9200 needs manual D+ pullup; off by default */
         if (cpu_is_at91rm9200()) {
-                if (udc->board.pullup_pin <= 0) {
+                if (gpio_is_valid(udc->board.pullup_pin)) {
                         DBG("no D+ pullup?\n");
                         retval = -ENODEV;
                         goto fail0;
@@ -1815,7 +1815,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
                 DBG("request irq %d failed\n", udc->udp_irq);
                 goto fail1;
         }
-        if (udc->board.vbus_pin > 0) {
+        if (gpio_is_valid(udc->board.vbus_pin)) {
                 retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
                 if (retval < 0) {
                         DBG("request vbus pin failed\n");
@@ -1859,10 +1859,10 @@ static int __init at91udc_probe(struct platform_device *pdev)
         INFO("%s version %s\n", driver_name, DRIVER_VERSION);
         return 0;
 fail4:
-        if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled)
+        if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
                 free_irq(udc->board.vbus_pin, udc);
 fail3:
-        if (udc->board.vbus_pin > 0)
+        if (gpio_is_valid(udc->board.vbus_pin))
                 gpio_free(udc->board.vbus_pin);
 fail2:
         free_irq(udc->udp_irq, udc);
@@ -1897,7 +1897,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 
         device_init_wakeup(&pdev->dev, 0);
         remove_debug_file(udc);
-        if (udc->board.vbus_pin > 0) {
+        if (gpio_is_valid(udc->board.vbus_pin)) {
                 free_irq(udc->board.vbus_pin, udc);
                 gpio_free(udc->board.vbus_pin);
         }
@@ -1941,7 +1941,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
                 enable_irq_wake(udc->udp_irq);
 
         udc->active_suspend = wake;
-        if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
+        if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled && wake)
                 enable_irq_wake(udc->board.vbus_pin);
         return 0;
 }
@@ -1951,7 +1951,7 @@ static int at91udc_resume(struct platform_device *pdev)
         struct at91_udc *udc = platform_get_drvdata(pdev);
         unsigned long   flags;
 
-        if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+        if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled &&
             udc->active_suspend)
                 disable_irq_wake(udc->board.vbus_pin);
 
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 596a0b464e61..4dff83d2f265 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -130,9 +130,6 @@ ep_matches (
                         num_req_streams = ep_comp->bmAttributes & 0x1f;
                         if (num_req_streams > ep->max_streams)
                                 return 0;
-                        /* Update the ep_comp descriptor if needed */
-                        if (num_req_streams != ep->max_streams)
-                                ep_comp->bmAttributes = ep->max_streams;
                 }
 
         }
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index a7dc1e1d45f2..2ac4ac2e4ef9 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -18,7 +18,7 @@
 
 #include "isp1760-hcd.h"
 
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -31,7 +31,7 @@
 #include <linux/pci.h>
 #endif
 
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
 struct isp1760 {
         struct usb_hcd *hcd;
         int rst_gpio;
@@ -437,7 +437,7 @@ static int __init isp1760_init(void)
         ret = platform_driver_register(&isp1760_plat_driver);
         if (!ret)
                 any_ret = 0;
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
         ret = platform_driver_register(&isp1760_of_driver);
         if (!ret)
                 any_ret = 0;
@@ -457,7 +457,7 @@ module_init(isp1760_init);
 static void __exit isp1760_exit(void)
 {
         platform_driver_unregister(&isp1760_plat_driver);
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ)
         platform_driver_unregister(&isp1760_of_driver);
 #endif
 #ifdef CONFIG_PCI
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 95a9fec38e89..5df0b0e3392b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -223,7 +223,7 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int
         if (port < 0 || port >= 2)
                 return;
 
-        if (pdata->vbus_pin[port] <= 0)
+        if (!gpio_is_valid(pdata->vbus_pin[port]))
                 return;
 
         gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
@@ -234,7 +234,7 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
         if (port < 0 || port >= 2)
                 return -EINVAL;
 
-        if (pdata->vbus_pin[port] <= 0)
+        if (!gpio_is_valid(pdata->vbus_pin[port]))
                 return -EINVAL;
 
         return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
@@ -465,7 +465,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 
         if (pdata) {
                 for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
-                        if (pdata->vbus_pin[i] <= 0)
+                        if (!gpio_is_valid(pdata->vbus_pin[i]))
                                 continue;
                         gpio_request(pdata->vbus_pin[i], "ohci_vbus");
                         ohci_at91_usb_set_power(pdata, i, 1);
@@ -474,7 +474,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
                 for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
                         int ret;
 
-                        if (pdata->overcurrent_pin[i] <= 0)
+                        if (!gpio_is_valid(pdata->overcurrent_pin[i]))
                                 continue;
                         gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
 
@@ -499,14 +499,14 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 
         if (pdata) {
                 for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
-                        if (pdata->vbus_pin[i] <= 0)
+                        if (!gpio_is_valid(pdata->vbus_pin[i]))
                                 continue;
                         ohci_at91_usb_set_power(pdata, i, 0);
                         gpio_free(pdata->vbus_pin[i]);
                 }
 
                 for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
-                        if (pdata->overcurrent_pin[i] <= 0)
+                        if (!gpio_is_valid(pdata->overcurrent_pin[i]))
                                 continue;
                         free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
                         gpio_free(pdata->overcurrent_pin[i]);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 60ddba8066ea..79cb0af779fa 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -774,6 +774,10 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
                         if (musb->double_buffer_not_ok)
                                 musb_writew(epio, MUSB_TXMAXP,
                                                 hw_ep->max_packet_sz_tx);
+                        else if (can_bulk_split(musb, qh->type))
+                                musb_writew(epio, MUSB_TXMAXP, packet_sz
+                                        | ((hw_ep->max_packet_sz_tx /
+                                                packet_sz) - 1) << 11);
                         else
                                 musb_writew(epio, MUSB_TXMAXP,
                                                 qh->maxpacket |