1 files changed, 504 insertions, 0 deletions

diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h
new file mode 100644
index 000000000000..67699c8e321c
--- /dev/null
+++ b/drivers/scsi/isci/phy.h
@@ -0,0 +1,504 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ISCI_PHY_H_
+#define _ISCI_PHY_H_
+
+#include <scsi/sas.h>
+#include <scsi/libsas.h>
+#include "isci.h"
+#include "sas.h"
+
+/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS
+ * before restarting the starting state machine.  Technically, the old parallel
+ * ATA specification required up to 30 seconds for a device to issue its
+ * signature FIS as a result of a soft reset.  Now we see that devices respond
+ * generally within 15 seconds, but we'll use 25 for now.
+ */
+#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT    25000
+
+/* This is the timeout for the SATA OOB/SN because the hardware does not
+ * recognize a hot plug after OOB signal but before the SN signals.  We need to
+ * make sure after a hotplug timeout if we have not received the speed event
+ * notification from the hardware that we restart the hardware OOB state
+ * machine.
+ */
+#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT  250
+
+enum sci_phy_protocol {
+        SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
+        SCIC_SDS_PHY_PROTOCOL_SAS,
+        SCIC_SDS_PHY_PROTOCOL_SATA,
+        SCIC_SDS_MAX_PHY_PROTOCOLS
+};
+
+/**
+ * isci_phy - hba local phy infrastructure
+ * @sm:
+ * @protocol: attached device protocol
+ * @phy_index: physical index relative to the controller (0-3)
+ * @bcn_received_while_port_unassigned: bcn to report after port association
+ * @sata_timer: timeout SATA signature FIS arrival
+ */
+struct isci_phy {
+        struct sci_base_state_machine sm;
+        struct isci_port *owning_port;
+        enum sas_linkrate max_negotiated_speed;
+        enum sci_phy_protocol protocol;
+        u8 phy_index;
+        bool bcn_received_while_port_unassigned;
+        bool is_in_link_training;
+        struct sci_timer sata_timer;
+        struct scu_transport_layer_registers __iomem *transport_layer_registers;
+        struct scu_link_layer_registers __iomem *link_layer_registers;
+        struct asd_sas_phy sas_phy;
+        struct isci_port *isci_port;
+        u8 sas_addr[SAS_ADDR_SIZE];
+        union {
+                struct sas_identify_frame iaf;
+                struct dev_to_host_fis fis;
+        } frame_rcvd;
+};
+
+static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy)
+{
+        struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy);
+
+        return iphy;
+}
+
+struct sci_phy_cap {
+        union {
+                struct {
+                        /*
+                         * The SAS specification indicates the start bit shall
+                         * always be set to
+                         * 1.  This implementation will have the start bit set
+                         * to 0 if the PHY CAPABILITIES were either not
+                         * received or speed negotiation failed.
+                         */
+                        u8 start:1;
+                        u8 tx_ssc_type:1;
+                        u8 res1:2;
+                        u8 req_logical_linkrate:4;
+
+                        u32 gen1_no_ssc:1;
+                        u32 gen1_ssc:1;
+                        u32 gen2_no_ssc:1;
+                        u32 gen2_ssc:1;
+                        u32 gen3_no_ssc:1;
+                        u32 gen3_ssc:1;
+                        u32 res2:17;
+                        u32 parity:1;
+                };
+                u32 all;
+        };
+}  __packed;
+
+/* this data structure reflects the link layer transmit identification reg */
+struct sci_phy_proto {
+        union {
+                struct {
+                        u16 _r_a:1;
+                        u16 smp_iport:1;
+                        u16 stp_iport:1;
+                        u16 ssp_iport:1;
+                        u16 _r_b:4;
+                        u16 _r_c:1;
+                        u16 smp_tport:1;
+                        u16 stp_tport:1;
+                        u16 ssp_tport:1;
+                        u16 _r_d:4;
+                };
+                u16 all;
+        };
+} __packed;
+
+
+/**
+ * struct sci_phy_properties - This structure defines the properties common to
+ *    all phys that can be retrieved.
+ *
+ *
+ */
+struct sci_phy_properties {
+        /**
+         * This field specifies the port that currently contains the
+         * supplied phy.  This field may be set to NULL
+         * if the phy is not currently contained in a port.
+         */
+        struct isci_port *iport;
+
+        /**
+         * This field specifies the link rate at which the phy is
+         * currently operating.
+         */
+        enum sas_linkrate negotiated_link_rate;
+
+        /**
+         * This field specifies the index of the phy in relation to other
+         * phys within the controller.  This index is zero relative.
+         */
+        u8 index;
+};
+
+/**
+ * struct sci_sas_phy_properties - This structure defines the properties,
+ *    specific to a SAS phy, that can be retrieved.
+ *
+ *
+ */
+struct sci_sas_phy_properties {
+        /**
+         * This field delineates the Identify Address Frame received
+         * from the remote end point.
+         */
+        struct sas_identify_frame rcvd_iaf;
+
+        /**
+         * This field delineates the Phy capabilities structure received
+         * from the remote end point.
+         */
+        struct sci_phy_cap rcvd_cap;
+
+};
+
+/**
+ * struct sci_sata_phy_properties - This structure defines the properties,
+ *    specific to a SATA phy, that can be retrieved.
+ *
+ *
+ */
+struct sci_sata_phy_properties {
+        /**
+         * This field delineates the signature FIS received from the
+         * attached target.
+         */
+        struct dev_to_host_fis signature_fis;
+
+        /**
+         * This field specifies to the user if a port selector is connected
+         * on the specified phy.
+         */
+        bool is_port_selector_present;
+
+};
+
+/**
+ * enum sci_phy_counter_id - This enumeration depicts the various pieces of
+ *    optional information that can be retrieved for a specific phy.
+ *
+ *
+ */
+enum sci_phy_counter_id {
+        /**
+         * This PHY information field tracks the number of frames received.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_FRAME,
+
+        /**
+         * This PHY information field tracks the number of frames transmitted.
+         */
+        SCIC_PHY_COUNTER_TRANSMITTED_FRAME,
+
+        /**
+         * This PHY information field tracks the number of DWORDs received.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD,
+
+        /**
+         * This PHY information field tracks the number of DWORDs transmitted.
+         */
+        SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD,
+
+        /**
+         * This PHY information field tracks the number of times DWORD
+         * synchronization was lost.
+         */
+        SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR,
+
+        /**
+         * This PHY information field tracks the number of received DWORDs with
+         * running disparity errors.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR,
+
+        /**
+         * This PHY information field tracks the number of received frames with a
+         * CRC error (not including short or truncated frames).
+         */
+        SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR,
+
+        /**
+         * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+         * primitives received.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT,
+
+        /**
+         * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+         * primitives transmitted.
+         */
+        SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT,
+
+        /**
+         * This PHY information field tracks the number of times the inactivity
+         * timer for connections on the phy has been utilized.
+         */
+        SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED,
+
+        /**
+         * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+         * primitives received.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT,
+
+        /**
+         * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+         * primitives transmitted.
+         */
+        SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT,
+
+        /**
+         * This PHY information field tracks the number of CREDIT BLOCKED
+         * primitives received.
+         * @note Depending on remote device implementation, credit blocks
+         *       may occur regularly.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED,
+
+        /**
+         * This PHY information field contains the number of short frames
+         * received.  A short frame is simply a frame smaller then what is
+         * allowed by either the SAS or SATA specification.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME,
+
+        /**
+         * This PHY information field contains the number of frames received after
+         * credit has been exhausted.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT,
+
+        /**
+         * This PHY information field contains the number of frames received after
+         * a DONE has been received.
+         */
+        SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE,
+
+        /**
+         * This PHY information field contains the number of times the phy
+         * failed to achieve DWORD synchronization during speed negotiation.
+         */
+        SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
+};
+
+enum sci_phy_states {
+        /**
+         * Simply the initial state for the base domain state machine.
+         */
+        SCI_PHY_INITIAL,
+
+        /**
+         * This state indicates that the phy has successfully been stopped.
+         * In this state no new IO operations are permitted on this phy.
+         * This state is entered from the INITIAL state.
+         * This state is entered from the STARTING state.
+         * This state is entered from the READY state.
+         * This state is entered from the RESETTING state.
+         */
+        SCI_PHY_STOPPED,
+
+        /**
+         * This state indicates that the phy is in the process of becomming
+         * ready.  In this state no new IO operations are permitted on this phy.
+         * This state is entered from the STOPPED state.
+         * This state is entered from the READY state.
+         * This state is entered from the RESETTING state.
+         */
+        SCI_PHY_STARTING,
+
+        /**
+         * Initial state
+         */
+        SCI_PHY_SUB_INITIAL,
+
+        /**
+         * Wait state for the hardware OSSP event type notification
+         */
+        SCI_PHY_SUB_AWAIT_OSSP_EN,
+
+        /**
+         * Wait state for the PHY speed notification
+         */
+        SCI_PHY_SUB_AWAIT_SAS_SPEED_EN,
+
+        /**
+         * Wait state for the IAF Unsolicited frame notification
+         */
+        SCI_PHY_SUB_AWAIT_IAF_UF,
+
+        /**
+         * Wait state for the request to consume power
+         */
+        SCI_PHY_SUB_AWAIT_SAS_POWER,
+
+        /**
+         * Wait state for request to consume power
+         */
+        SCI_PHY_SUB_AWAIT_SATA_POWER,
+
+        /**
+         * Wait state for the SATA PHY notification
+         */
+        SCI_PHY_SUB_AWAIT_SATA_PHY_EN,
+
+        /**
+         * Wait for the SATA PHY speed notification
+         */
+        SCI_PHY_SUB_AWAIT_SATA_SPEED_EN,
+
+        /**
+         * Wait state for the SIGNATURE FIS unsolicited frame notification
+         */
+        SCI_PHY_SUB_AWAIT_SIG_FIS_UF,
+
+        /**
+         * Exit state for this state machine
+         */
+        SCI_PHY_SUB_FINAL,
+
+        /**
+         * This state indicates the the phy is now ready.  Thus, the user
+         * is able to perform IO operations utilizing this phy as long as it
+         * is currently part of a valid port.
+         * This state is entered from the STARTING state.
+         */
+        SCI_PHY_READY,
+
+        /**
+         * This state indicates that the phy is in the process of being reset.
+         * In this state no new IO operations are permitted on this phy.
+         * This state is entered from the READY state.
+         */
+        SCI_PHY_RESETTING,
+
+        /**
+         * Simply the final state for the base phy state machine.
+         */
+        SCI_PHY_FINAL,
+};
+
+void sci_phy_construct(
+        struct isci_phy *iphy,
+        struct isci_port *iport,
+        u8 phy_index);
+
+struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy);
+
+void sci_phy_set_port(
+        struct isci_phy *iphy,
+        struct isci_port *iport);
+
+enum sci_status sci_phy_initialize(
+        struct isci_phy *iphy,
+        struct scu_transport_layer_registers __iomem *transport_layer_registers,
+        struct scu_link_layer_registers __iomem *link_layer_registers);
+
+enum sci_status sci_phy_start(
+        struct isci_phy *iphy);
+
+enum sci_status sci_phy_stop(
+        struct isci_phy *iphy);
+
+enum sci_status sci_phy_reset(
+        struct isci_phy *iphy);
+
+void sci_phy_resume(
+        struct isci_phy *iphy);
+
+void sci_phy_setup_transport(
+        struct isci_phy *iphy,
+        u32 device_id);
+
+enum sci_status sci_phy_event_handler(
+        struct isci_phy *iphy,
+        u32 event_code);
+
+enum sci_status sci_phy_frame_handler(
+        struct isci_phy *iphy,
+        u32 frame_index);
+
+enum sci_status sci_phy_consume_power_handler(
+        struct isci_phy *iphy);
+
+void sci_phy_get_sas_address(
+        struct isci_phy *iphy,
+        struct sci_sas_address *sas_address);
+
+void sci_phy_get_attached_sas_address(
+        struct isci_phy *iphy,
+        struct sci_sas_address *sas_address);
+
+struct sci_phy_proto;
+void sci_phy_get_protocols(
+        struct isci_phy *iphy,
+        struct sci_phy_proto *protocols);
+enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy);
+
+struct isci_host;
+void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index);
+int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf);
+
+#endif /* !defined(_ISCI_PHY_H_) */