13 files changed, 102 insertions, 92 deletions

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cfa91ab7acf8..60b6a9daff7e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -730,6 +730,7 @@ int ath9k_hw_init(struct ath_hw *ah)
         case AR9300_DEVID_QCA955X:
         case AR9300_DEVID_AR9580:
         case AR9300_DEVID_AR9462:
+        case AR9485_DEVID_AR1111:
                 break;
         default:
                 if (common->bus_ops->ath_bus_type == ATH_USB)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index dd0c146d81dc..ce7332c64efb 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -49,6 +49,7 @@
 #define AR9300_DEVID_AR9462     0x0034
 #define AR9300_DEVID_AR9330     0x0035
 #define AR9300_DEVID_QCA955X    0x0038
+#define AR9485_DEVID_AR1111     0x0037
 
 #define AR5416_AR9100_DEVID     0x000b
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 87b89d55e637..d455de9162ec 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
         { PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
         { PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
         { PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E  AR9462 */
+        { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E  AR1111/AR9485 */
         { 0 }
 };
 
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b80352b308d5..a140165dfee0 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev)
         if (dev->dev->chip_id == 0x4301) {
                 mask |= 0x0060;
                 set |= 0x0060;
+        } else if (dev->dev->chip_id == 0x5354) {
+                /* Don't allow overtaking buttons GPIOs */
+                set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
         }
-        if (dev->dev->chip_id == 0x5354)
-                set &= 0xff02;
+
         if (0 /* FIXME: conditional unknown */ ) {
                 b43_write16(dev, B43_MMIO_GPIO_MASK,
                             b43_read16(dev, B43_MMIO_GPIO_MASK)
                             | 0x0100);
-                mask |= 0x0180;
-                set |= 0x0180;
+                /* BT Coexistance Input */
+                mask |= 0x0080;
+                set |= 0x0080;
+                /* BT Coexistance Out */
+                mask |= 0x0100;
+                set |= 0x0100;
         }
         if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
+                /* PA is controlled by gpio 9, let ucode handle it */
                 b43_write16(dev, B43_MMIO_GPIO_MASK,
                             b43_read16(dev, B43_MMIO_GPIO_MASK)
                             | 0x0200);
                 mask |= 0x0200;
                 set |= 0x0200;
         }
-        if (dev->dev->core_rev >= 2)
-                mask |= 0x0010; /* FIXME: This is redundant. */
 
         switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
         case B43_BUS_BCMA:
                 bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
                                 (bcma_cc_read32(&dev->dev->bdev->bus->drv_cc,
-                                        BCMA_CC_GPIOCTL) & mask) | set);
+                                        BCMA_CC_GPIOCTL) & ~mask) | set);
                 break;
 #endif
 #ifdef CONFIG_B43_SSB
@@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
                 if (gpiodev)
                         ssb_write32(gpiodev, B43_GPIO_CONTROL,
                                     (ssb_read32(gpiodev, B43_GPIO_CONTROL)
-                                    & mask) | set);
+                                    & ~mask) | set);
                 break;
 #endif
         }
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 9a4c63f927cb..7ed7d7577024 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -382,9 +382,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 {
         struct brcms_c_info *wlc = wlc_cm->wlc;
         struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
-        const struct ieee80211_reg_rule *reg_rule;
         struct txpwr_limits txpwr;
-        int ret;
 
         brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);
 
@@ -393,8 +391,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
         );
 
         /* set or restore gmode as required by regulatory */
-        ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, &reg_rule);
-        if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM))
+        if (ch->flags & IEEE80211_CHAN_NO_OFDM)
                 brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
         else
                 brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 9e79d47e077f..192ad5c1fcc8 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -121,7 +121,8 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = {
                  IEEE80211_CHAN_NO_HT40PLUS),
         CHAN2GHZ(14, 2484,
                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
-                 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+                 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
+                 IEEE80211_CHAN_NO_OFDM)
 };
 
 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c
index 6fddd2785e6e..a82f46c10f5e 100644
--- a/drivers/net/wireless/iwlwifi/dvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.c
@@ -707,11 +707,14 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
  */
 static bool rs_use_green(struct ieee80211_sta *sta)
 {
-        struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-        struct iwl_rxon_context *ctx = sta_priv->ctx;
-
-        return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
-                !(ctx->ht.non_gf_sta_present);
+        /*
+         * There's a bug somewhere in this code that causes the
+         * scaling to get stuck because GF+SGI can't be combined
+         * in SISO rates. Until we find that bug, disable GF, it
+         * has only limited benefit and we still interoperate with
+         * GF APs since we can always receive GF transmissions.
+         */
+        return false;
 }
 
 /**
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index eb5de800ed90..1c10b542ab23 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1254,6 +1254,7 @@ static int lbs_associate(struct lbs_private *priv,
                         netif_tx_wake_all_queues(priv->dev);
         }
 
+        kfree(cmd);
 done:
         lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
         return ret;
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 76caebaa4397..e970897f6ab5 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1314,6 +1314,7 @@ static void if_sdio_remove(struct sdio_func *func)
                 kfree(packet);
         }
 
+        kfree(card);
         lbs_deb_leave(LBS_DEB_SDIO);
 }
 
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 58048189bd24..fe1ea43c5149 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -571,7 +571,10 @@ static int lbs_thread(void *data)
                         netdev_info(dev, "Timeout submitting command 0x%04x\n",
                                     le16_to_cpu(cmdnode->cmdbuf->command));
                         lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
-                        if (priv->reset_card)
+
+                        /* Reset card, but only when it isn't in the process
+                         * of being shutdown anyway. */
+                        if (!dev->dismantle && priv->reset_card)
                                 priv->reset_card(priv);
                 }
                 priv->cmd_timed_out = 0;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 88455b1b9fe0..cb8c2aca54e4 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
         mutex_unlock(&rt2x00dev->csr_mutex);
 }
 
+static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
+{
+        u32 reg;
+        int i, count;
+
+        rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+        if (rt2x00_get_field32(reg, WLAN_EN))
+                return 0;
+
+        rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
+        rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
+        rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
+        rt2x00_set_field32(&reg, WLAN_EN, 1);
+        rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+
+        udelay(REGISTER_BUSY_DELAY);
+
+        count = 0;
+        do {
+                /*
+                 * Check PLL_LD & XTAL_RDY.
+                 */
+                for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+                        rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
+                        if (rt2x00_get_field32(reg, PLL_LD) &&
+                            rt2x00_get_field32(reg, XTAL_RDY))
+                                break;
+                        udelay(REGISTER_BUSY_DELAY);
+                }
+
+                if (i >= REGISTER_BUSY_COUNT) {
+
+                        if (count >= 10)
+                                return -EIO;
+
+                        rt2800_register_write(rt2x00dev, 0x58, 0x018);
+                        udelay(REGISTER_BUSY_DELAY);
+                        rt2800_register_write(rt2x00dev, 0x58, 0x418);
+                        udelay(REGISTER_BUSY_DELAY);
+                        rt2800_register_write(rt2x00dev, 0x58, 0x618);
+                        udelay(REGISTER_BUSY_DELAY);
+                        count++;
+                } else {
+                        count = 0;
+                }
+
+                rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+                rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
+                rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
+                rt2x00_set_field32(&reg, WLAN_RESET, 1);
+                rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+                udelay(10);
+                rt2x00_set_field32(&reg, WLAN_RESET, 0);
+                rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+                udelay(10);
+                rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
+        } while (count != 0);
+
+        return 0;
+}
+
 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
                         const u8 command, const u8 token,
                         const u8 arg0, const u8 arg1)
@@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 {
         unsigned int i;
         u32 reg;
+        int retval;
+
+        if (rt2x00_rt(rt2x00dev, RT3290)) {
+                retval = rt2800_enable_wlan_rt3290(rt2x00dev);
+                if (retval)
+                        return -EBUSY;
+        }
 
         /*
          * If driver doesn't wake up firmware here,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 235376e9cb04..98aa426a3564 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
         return rt2800_validate_eeprom(rt2x00dev);
 }
 
-static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
-{
-        u32 reg;
-        int i, count;
-
-        rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
-        if (rt2x00_get_field32(reg, WLAN_EN))
-                return 0;
-
-        rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
-        rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
-        rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
-        rt2x00_set_field32(&reg, WLAN_EN, 1);
-        rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-
-        udelay(REGISTER_BUSY_DELAY);
-
-        count = 0;
-        do {
-                /*
-                 * Check PLL_LD & XTAL_RDY.
-                 */
-                for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-                        rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
-                        if (rt2x00_get_field32(reg, PLL_LD) &&
-                            rt2x00_get_field32(reg, XTAL_RDY))
-                                break;
-                        udelay(REGISTER_BUSY_DELAY);
-                }
-
-                if (i >= REGISTER_BUSY_COUNT) {
-
-                        if (count >= 10)
-                                return -EIO;
-
-                        rt2800_register_write(rt2x00dev, 0x58, 0x018);
-                        udelay(REGISTER_BUSY_DELAY);
-                        rt2800_register_write(rt2x00dev, 0x58, 0x418);
-                        udelay(REGISTER_BUSY_DELAY);
-                        rt2800_register_write(rt2x00dev, 0x58, 0x618);
-                        udelay(REGISTER_BUSY_DELAY);
-                        count++;
-                } else {
-                        count = 0;
-                }
-
-                rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
-                rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
-                rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
-                rt2x00_set_field32(&reg, WLAN_RESET, 1);
-                rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-                udelay(10);
-                rt2x00_set_field32(&reg, WLAN_RESET, 0);
-                rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-                udelay(10);
-                rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
-        } while (count != 0);
-
-        return 0;
-}
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
         int retval;
@@ -1063,17 +1003,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
                 return retval;
 
         /*
-         * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan
-         * clk for rt3290. That avoid the MCU fail in start phase.
-         */
-        if (rt2x00_rt(rt2x00dev, RT3290)) {
-                retval = rt2800_enable_wlan_rt3290(rt2x00dev);
-
-                if (retval)
-                        return retval;
-        }
-
-        /*
          * This device has multiple filters for control frames
          * and has a separate filter for PS Poll frames.
          */
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f32259686b45..3f7bc5cadf9a 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2243,8 +2243,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 
 static void rt61pci_wakeup(struct rt2x00_dev *rt2x00dev)
 {
-        struct ieee80211_conf conf = { .flags = 0 };
-        struct rt2x00lib_conf libconf = { .conf = &conf };
+        struct rt2x00lib_conf libconf = { .conf = &rt2x00dev->hw->conf };
 
         rt61pci_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS);
 }