12 files changed, 101 insertions, 12 deletions

diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
index 1b0039bdeb4e..1b11f5c6a2d9 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -35,6 +35,18 @@
 #ifdef CONFIG_OMAP_LL_DEBUG_UART3
                 add     \rx, \rx, #0x00004000   @ UART 3
 #endif
+
+#elif   CONFIG_ARCH_OMAP3
+                moveq   \rx, #0x48000000        @ physical base address
+                movne   \rx, #0xd8000000        @ virtual base
+                orr     \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+                add     \rx, \rx, #0x00002000   @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+                add     \rx, \rx, #0x00fb0000   @ UART 3
+                add     \rx, \rx, #0x00006000
+#endif
 #endif
                 .endm
 
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index d4e9043bf201..030118ee204a 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -55,9 +55,17 @@
 1510:
                 .endm
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
+#if defined(CONFIG_ARCH_OMAP24XX)
 #include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET   0x0040          /* Active interrupt number */
 
                 .macro  disable_fiq
                 .endm
@@ -79,7 +87,7 @@
                 ldr     \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
                 cmp     \irqnr, #0x0
 2222:
-                ldrne   \irqnr, [\base, #IRQ_SIR_IRQ]
+                ldrne   \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 
                 .endm
 
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 3c7b425c585e..45b678439bb7 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -84,6 +84,10 @@ struct gpmc_timings {
         u16 access;             /* Start-cycle to first data valid delay */
         u16 rd_cycle;           /* Total read cycle time */
         u16 wr_cycle;           /* Total write cycle time */
+
+        /* The following are only on OMAP3430 */
+        u16 wr_access;          /* WRACCESSTIME */
+        u16 wr_data_mux_bus;    /* WRDATAONADMUXBUS */
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index dd0cf069431d..adc83b7b8205 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -73,7 +73,6 @@
 #define L4_24XX_VIRT    0xd8000000
 #define L4_24XX_SIZE    SZ_1M           /* 1MB of 128MB used, want 1MB sect */
 
-#ifdef CONFIG_ARCH_OMAP2430
 #define L4_WK_243X_PHYS         L4_WK_243X_BASE         /* 0x49000000 */
 #define L4_WK_243X_VIRT         0xd9000000
 #define L4_WK_243X_SIZE         SZ_1M
@@ -87,8 +86,6 @@
 #define OMAP243X_SMS_VIRT       0xFC000000
 #define OMAP243X_SMS_SIZE       SZ_1M
 
-#endif
-
 #define IO_OFFSET               0x90000000
 #define __IO_ADDRESS(pa)        ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
 #define __OMAP2_IO_ADDRESS(pa)  ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index e9fd63055cb2..9ee04969d366 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -286,6 +286,41 @@
 #define INT_24XX_USB_IRQ_OTG    80
 #define INT_24XX_MMC_IRQ        83
 
+#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_34XX_ST_MCBSP2_IRQ  4
+#define INT_34XX_ST_MCBSP3_IRQ  5
+#define INT_34XX_SSM_ABORT_IRQ  6
+#define INT_34XX_SYS_NIRQ       7
+#define INT_34XX_D2D_FW_IRQ     8
+#define INT_34XX_PRCM_MPU_IRQ   11
+#define INT_34XX_MCBSP1_IRQ     16
+#define INT_34XX_MCBSP2_IRQ     17
+#define INT_34XX_MCBSP3_IRQ     22
+#define INT_34XX_MCBSP4_IRQ     23
+#define INT_34XX_CAM_IRQ        24
+#define INT_34XX_MCBSP5_IRQ     27
+#define INT_34XX_GPIO_BANK1     29
+#define INT_34XX_GPIO_BANK2     30
+#define INT_34XX_GPIO_BANK3     31
+#define INT_34XX_GPIO_BANK4     32
+#define INT_34XX_GPIO_BANK5     33
+#define INT_34XX_GPIO_BANK6     34
+#define INT_34XX_USIM_IRQ       35
+#define INT_34XX_WDT3_IRQ       36
+#define INT_34XX_SPI4_IRQ       48
+#define INT_34XX_SHA1MD52_IRQ   49
+#define INT_34XX_FPKA_READY_IRQ 50
+#define INT_34XX_SHA1MD51_IRQ   51
+#define INT_34XX_RNG_IRQ        52
+#define INT_34XX_I2C3_IRQ       61
+#define INT_34XX_FPKA_ERROR_IRQ 64
+#define INT_34XX_PBIAS_IRQ      75
+#define INT_34XX_OHCI_IRQ       76
+#define INT_34XX_EHCI_IRQ       77
+#define INT_34XX_TLL_IRQ        78
+#define INT_34XX_PARTHASH_IRQ   79
+#define INT_34XX_MMC3_IRQ       94
+#define INT_34XX_GPT12_IRQ      95
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES     192
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index a3074f2fb7ce..c8d0aa118be7 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -91,7 +91,7 @@
 #define AUDIO_DMA_TX            OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX            OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 
 #define OMAP_MCBSP_REG_DRR2     0x00
 #define OMAP_MCBSP_REG_DRR1     0x04
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index a325caf80d04..d40cac60b959 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -38,7 +38,7 @@
  */
 #if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET             UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 #define PHYS_OFFSET             UL(0x80000000)
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 5670d563f378..6bbf1789bed5 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -723,7 +723,31 @@ enum omap34xx_index {
         AB12_3430_USB3HS_TLL_DATA4,
         AB13_3430_USB3HS_TLL_DATA5,
         AA13_3430_USB3HS_TLL_DATA6,
-        AA12_3430_USB3HS_TLL_DATA7
+        AA12_3430_USB3HS_TLL_DATA7,
+
+        /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+        AF10_3430_USB1FS_PHY_MM1_RXDP,
+        AG9_3430_USB1FS_PHY_MM1_RXDM,
+        W13_3430_USB1FS_PHY_MM1_RXRCV,
+        W12_3430_USB1FS_PHY_MM1_TXSE0,
+        W11_3430_USB1FS_PHY_MM1_TXDAT,
+        Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+        /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+        AF7_3430_USB2FS_PHY_MM2_RXDP,
+        AH7_3430_USB2FS_PHY_MM2_RXDM,
+        AB10_3430_USB2FS_PHY_MM2_RXRCV,
+        AB9_3430_USB2FS_PHY_MM2_TXSE0,
+        W3_3430_USB2FS_PHY_MM2_TXDAT,
+        T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+        /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+        AH3_3430_USB3FS_PHY_MM3_RXDP,
+        AE3_3430_USB3FS_PHY_MM3_RXDM,
+        AD1_3430_USB3FS_PHY_MM3_RXRCV,
+        AE1_3430_USB3FS_PHY_MM3_TXSE0,
+        AD2_3430_USB3FS_PHY_MM3_TXDAT,
+        AC1_3430_USB3FS_PHY_MM3_TXEN_N,
 
 };
 
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
index 556f0eb4d55c..24335d4932f5 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -39,7 +39,6 @@
 /* interrupt controller */
 #define OMAP24XX_IC_BASE        (L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE  0x40000000
-#define IRQ_SIR_IRQ             0x0040
 
 #define OMAP2420_CTRL_BASE      L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE  (L4_24XX_BASE + 0x4000)
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 25ee3819faad..a98c6c3beb2c 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,8 +25,8 @@
 #define SDRC_DLLB_STATUS        0x06C
 #define SDRC_POWER              0x070
 #define SDRC_MR_0               0x084
-#define SDRC_ACTIM_CTRL_A       0x09c
-#define SDRC_ACTIM_CTRL_B       0x0a0
+#define SDRC_ACTIM_CTRL_A_0     0x09c
+#define SDRC_ACTIM_CTRL_B_0     0x0a0
 #define SDRC_RFR_CTRL_0         0x0a4
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index e09323449981..ab35d622dcf5 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
                                       u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+                                     u32 sdrc_actim_ctrla,
+                                     u32 sdrc_actim_ctrlb, u32 m2);
+
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap1_sram_reprogram_clock_sz;
@@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
                                                 u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+                                          u32 sdrc_actim_ctrla,
+                                          u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 06a28c7b98de..06923f261545 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode)
 
 static inline void arch_reset(char mode)
 {
-        if (!cpu_is_omap24xx())
+        if (!cpu_class_is_omap2())
                 omap1_arch_reset(mode);
         else
                 omap_prcm_arch_reset(mode);