42 files changed, 289 insertions, 81 deletions

diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index c1c5fb6a5b4c..399c4c49722f 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,11 +15,12 @@
 
 #include <linux/linkage.h>
 
-#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 
 #include <mach/ams-delta-fiq.h>
 
+#include "iomap.h"
+
 /*
  * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
  * Unfortunately, those were not placed in a separate header file.
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 152b32c15e28..fcce7ff37630 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -22,6 +22,7 @@
 #include <plat/board-ams-delta.h>
 
 #include <asm/fiq.h>
+
 #include <mach/ams-delta-fiq.h>
 
 static struct fiq_handler fh = {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e0e8245f3c9f..83eac744ddb9 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -21,25 +21,27 @@
 #include <linux/serial_8250.h>
 #include <linux/export.h>
 #include <linux/omapfb.h>
+#include <linux/io.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/serial.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include "common.h"
-#include <mach/camera.h>
 
+#include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
+#include <mach/camera.h>
+
+#include "iomap.h"
+#include "common.h"
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 7afaf3c5bdc6..80bd43c7f4ec 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -23,7 +23,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -33,9 +32,13 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 /* fsample is pretty close to p2-sample */
 
 #define fsample_cpld_read(reg) __raw_readb(reg)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index af2be8c12c07..c3068622fdcb 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -32,8 +32,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -44,9 +42,11 @@
 #include <plat/irda.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "board-h2.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7cfd25b90735..64b8584f64ce 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -34,21 +34,21 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/irqs.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
-#include "common.h"
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include "common.h"
 #include "board-h3.h"
 
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index af2afcf24f75..827d83a96af8 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -27,7 +27,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/io.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
@@ -42,7 +42,6 @@
 #include <asm/mach/arch.h>
 
 #include <plat/omap7xx.h>
-#include "common.h"
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>
@@ -50,7 +49,7 @@
 
 #include <mach/irqs.h>
 
-#include <linux/delay.h>
+#include "common.h"
 
 /* LCD register definition */
 #define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 1d5ab6606b9f..61219182d16a 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -27,7 +27,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,9 +37,13 @@
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/mmc.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START        0x04000300
 
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 9b6332a31fb6..fe95ec5f6f03 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -21,7 +21,6 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -30,11 +29,14 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 #define ADS7846_PENDOWN_GPIO    15
 
 static const unsigned int nokia770_keymap[] = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ef874655fbd3..1fe347396f4d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -35,15 +35,11 @@
 #include <linux/leds.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-
 #include <linux/i2c/tps65010.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -52,6 +48,9 @@
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
+
+#include <mach/hardware.h>
+
 #include "common.h"
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 612342cb2a2d..0863d8e2bdf1 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -29,7 +29,6 @@
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,6 +41,9 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
+
+#include <mach/hardware.h>
+
 #include "common.h"
 
 #define PALMTE_USBDETECT_GPIO   0
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index b63350bc88fd..4ff699c509c0 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -25,8 +25,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 #include <linux/omapfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -40,10 +41,10 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include "common.h"
 
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 
 #define PALMTT_USBDETECT_GPIO   0
 #define PALMTT_CABLE_GPIO       1
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9924c70af09f..abcbbd339aeb 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -28,8 +28,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/omapfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,10 +43,10 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include "common.h"
 
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 
 #define PALMZ71_USBDETECT_GPIO  0
 #define PALMZ71_PENIRQ_GPIO     6
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 8e0153447c6d..76d4ee05a814 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -23,7 +23,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -33,9 +32,13 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 static const unsigned int p2_keymap[] = {
         KEY(0, 0, KEY_UP),
         KEY(1, 0, KEY_RIGHT),
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0c76e12337d9..f34cb74a9f41 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -29,7 +29,6 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,10 +40,13 @@
 #include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include "common.h"
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
 {
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index f83a502dc93c..659d0f75de2c 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -27,18 +27,20 @@
 #include <linux/smc91x.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board-voiceblue.h>
-#include "common.h"
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 static struct plat_serial8250_port voiceblue_ports[] = {
         {
                 .mapbase        = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 0c50df05d135..67382ddd8c83 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -15,8 +15,8 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -27,6 +27,9 @@
 #include <plat/sram.h>
 #include <plat/clkdev_omap.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
 #include "clock.h"
 #include "opp.h"
 
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 94699a82a734..c6ce93f71d08 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -15,10 +15,10 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
-#include <linux/io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
@@ -28,6 +28,9 @@
 #include <plat/sram.h>  /* for omap_sram_reprogram_clock() */
 #include <plat/usb.h>   /* for OTG_BASE */
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
 #include "clock.h"
 
 /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index a9a5146dd2d4..af658ad338ec 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -58,5 +58,6 @@ void omap1_restart(char, const char *);
 
 extern struct sys_timer omap1_timer;
 extern bool omap_32k_timer_init(void);
+extern void __init omap_init_consistent_dma_size(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 187b2fe132e9..dcd8ddbec2bb 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -15,20 +15,20 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/spi/spi.h>
 
-#include <mach/camera.h>
-#include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include "common.h"
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
 
+#include <mach/camera.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "clock.h"
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index f5a52204b89f..3ef7d52316b4 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -19,11 +19,11 @@
  */
 
 #include <linux/err.h>
-#include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/io.h>
 
 #include <plat/dma.h>
 #include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 1749cb37dda0..f9bf78d4fdfb 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -6,13 +6,15 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 
-#include <plat/io.h>
 #include <plat/tc.h>
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
         static int count;
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0a17a1a7e00d..76c67b3f9f61 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -24,12 +24,15 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <plat/fpga.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+
 static void fpga_mask_irq(struct irq_data *d)
 {
         unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 399da4ce017b..634903ef8292 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
         .irqstatus      = OMAP_MPUIO_GPIO_INT,
         .irqenable      = OMAP_MPUIO_GPIO_MASKIT,
         .irqenable_inv  = true,
+        .irqctrl        = OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
         .virtual_irq_start      = IH_MPUIO_BASE,
-        .bank_type              = METHOD_MPUIO,
+        .is_mpuio               = true,
         .bank_width             = 16,
         .bank_stride            = 1,
         .regs                   = &omap15xx_mpuio_regs,
@@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
         .irqstatus      = OMAP1510_GPIO_INT_STATUS,
         .irqenable      = OMAP1510_GPIO_INT_MASK,
         .irqenable_inv  = true,
+        .irqctrl        = OMAP1510_GPIO_INT_CONTROL,
+        .pinctrl        = OMAP1510_GPIO_PIN_CONTROL,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
         .virtual_irq_start      = IH_GPIO_BASE,
-        .bank_type              = METHOD_GPIO_1510,
         .bank_width             = 16,
         .regs                   = &omap15xx_gpio_regs,
 };
@@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void)
         platform_device_register(&omap15xx_mpu_gpio);
         platform_device_register(&omap15xx_gpio);
 
-        gpio_bank_count = 2;
         return 0;
 }
 postcore_initcall(omap15xx_gpio_init);
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 0f399bd0e70e..1fb3b9ad496e 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -24,6 +24,9 @@
 #define OMAP1610_GPIO4_BASE             0xfffbbc00
 #define OMAP1_MPUIO_VBASE               OMAP1_MPUIO_BASE
 
+/* smart idle, enable wakeup */
+#define SYSCONFIG_WORD                  0x14
+
 /* mpu gpio */
 static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
         {
@@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
         .irqstatus      = OMAP_MPUIO_GPIO_INT,
         .irqenable      = OMAP_MPUIO_GPIO_MASKIT,
         .irqenable_inv  = true,
+        .irqctrl        = OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
         .virtual_irq_start      = IH_MPUIO_BASE,
-        .bank_type              = METHOD_MPUIO,
+        .is_mpuio               = true,
         .bank_width             = 16,
         .bank_stride            = 1,
         .regs                   = &omap16xx_mpuio_regs,
@@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
         .irqenable      = OMAP1610_GPIO_IRQENABLE1,
         .set_irqenable  = OMAP1610_GPIO_SET_IRQENABLE1,
         .clr_irqenable  = OMAP1610_GPIO_CLEAR_IRQENABLE1,
+        .wkup_en        = OMAP1610_GPIO_WAKEUPENABLE,
+        .edgectrl1      = OMAP1610_GPIO_EDGE_CTRL1,
+        .edgectrl2      = OMAP1610_GPIO_EDGE_CTRL2,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
         .virtual_irq_start      = IH_GPIO_BASE,
-        .bank_type              = METHOD_GPIO_1610,
         .bank_width             = 16,
         .regs                   = &omap16xx_gpio_regs,
 };
@@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 16,
-        .bank_type              = METHOD_GPIO_1610,
         .bank_width             = 16,
         .regs                   = &omap16xx_gpio_regs,
 };
@@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 32,
-        .bank_type              = METHOD_GPIO_1610,
         .bank_width             = 16,
         .regs                   = &omap16xx_gpio_regs,
 };
@@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 48,
-        .bank_type              = METHOD_GPIO_1610,
         .bank_width             = 16,
         .regs                   = &omap16xx_gpio_regs,
 };
@@ -214,14 +217,42 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = {
 static int __init omap16xx_gpio_init(void)
 {
         int i;
+        void __iomem *base;
+        struct resource *res;
+        struct platform_device *pdev;
+        struct omap_gpio_platform_data *pdata;
 
         if (!cpu_is_omap16xx())
                 return -EINVAL;
 
-        for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
-                platform_device_register(omap16xx_gpio_dev[i]);
+        /*
+         * Enable system clock for GPIO module.
+         * The CAM_CLK_CTRL *is* really the right place.
+         */
+        omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+                                        ULPD_CAM_CLK_CTRL);
+
+        for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
+                pdev = omap16xx_gpio_dev[i];
+                pdata = pdev->dev.platform_data;
+
+                res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+                if (unlikely(!res)) {
+                        dev_err(&pdev->dev, "Invalid mem resource.\n");
+                        return -ENODEV;
+                }
 
-        gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev);
+                base = ioremap(res->start, resource_size(res));
+                if (unlikely(!base)) {
+                        dev_err(&pdev->dev, "ioremap failed.\n");
+                        return -ENOMEM;
+                }
+
+                __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
+                iounmap(base);
+
+                platform_device_register(omap16xx_gpio_dev[i]);
+        }
 
         return 0;
 }
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 5ab63eab0ff5..4771d6b68b96 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
         .irqstatus      = OMAP_MPUIO_GPIO_INT / 2,
         .irqenable      = OMAP_MPUIO_GPIO_MASKIT / 2,
         .irqenable_inv  = true,
+        .irqctrl        = OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
         .virtual_irq_start      = IH_MPUIO_BASE,
-        .bank_type              = METHOD_MPUIO,
-        .bank_width             = 32,
+        .is_mpuio               = true,
+        .bank_width             = 16,
         .bank_stride            = 2,
         .regs                   = &omap7xx_mpuio_regs,
 };
@@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
         .irqstatus      = OMAP7XX_GPIO_INT_STATUS,
         .irqenable      = OMAP7XX_GPIO_INT_MASK,
         .irqenable_inv  = true,
+        .irqctrl        = OMAP7XX_GPIO_INT_CONTROL,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
         .virtual_irq_start      = IH_GPIO_BASE,
-        .bank_type              = METHOD_GPIO_7XX,
         .bank_width             = 32,
         .regs                   = &omap7xx_gpio_regs,
 };
@@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 32,
-        .bank_type              = METHOD_GPIO_7XX,
         .bank_width             = 32,
         .regs                   = &omap7xx_gpio_regs,
 };
@@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 64,
-        .bank_type              = METHOD_GPIO_7XX,
         .bank_width             = 32,
         .regs                   = &omap7xx_gpio_regs,
 };
@@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 96,
-        .bank_type              = METHOD_GPIO_7XX,
         .bank_width             = 32,
         .regs                   = &omap7xx_gpio_regs,
 };
@@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 128,
-        .bank_type              = METHOD_GPIO_7XX,
         .bank_width             = 32,
         .regs                   = &omap7xx_gpio_regs,
 };
@@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
         .virtual_irq_start      = IH_GPIO_BASE + 160,
-        .bank_type              = METHOD_GPIO_7XX,
         .bank_width             = 32,
         .regs                   = &omap7xx_gpio_regs,
 };
@@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void)
         for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
                 platform_device_register(omap7xx_gpio_dev[i]);
 
-        gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
-
         return 0;
 }
 postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a0e3560b39db..f24c1e2c5044 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,8 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+
 #include <plat/cpu.h>
 
+#include <mach/hardware.h>
+
 #define OMAP_DIE_ID_0           0xfffe1800
 #define OMAP_DIE_ID_1           0xfffe1804
 #define OMAP_PRODUCTION_ID_0    0xfffe2000
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index 83c0250c530a..fa0f32a686aa 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -9,10 +9,12 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
-#include <asm/hardware/gic.h>
+
+#include "../../iomap.h"
 
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index a3f6287b2007..01e35fa106b8 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -2,4 +2,40 @@
  * arch/arm/mach-omap1/include/mach/hardware.h
  */
 
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#ifndef __ASSEMBLER__
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+#include <plat/tc.h>
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+        return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+                        ?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+        return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+                        ? 0 : OMAP_CS3_PHYS;
+}
+
+#endif
+#endif
+
 #include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
index 57bdf74a3e64..37b12e1fd022 100644
--- a/arch/arm/mach-omap1/include/mach/io.h
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -1,5 +1,46 @@
 /*
  * arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
  */
 
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index c6337645ba8a..901082def9bd 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -18,7 +18,8 @@
  * Note that the is_lbus_device() test is not very efficient on 1510
  * because of the strncmp().
  */
-#ifdef CONFIG_ARCH_OMAP15XX
+#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
+#include <plat/cpu.h>
 
 /*
  * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 55a8f582d04c..d969a7203d14 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,9 +15,12 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
+
 #include <plat/mux.h>
 #include <plat/tc.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "clock.h"
 
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h
new file mode 100644
index 000000000000..d68175761c3d
--- /dev/null
+++ b/arch/arm/mach-omap1/iomap.h
@@ -0,0 +1,42 @@
+/*
+ * IO mappings for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                (x)
+#else
+#define IOMEM(x)                ((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET         0x01000000      /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)    IOMEM((pa) - OMAP1_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS           0xFFFB0000
+#define OMAP1_IO_SIZE           0x40000
+#define OMAP1_IO_VIRT           (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e5b104b7fce6..4448114fab72 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -42,11 +42,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+
 #include <plat/cpu.h>
 
+#include <mach/hardware.h>
+
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
 
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 4c5ce7d829c2..86ace9aaa663 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,9 +27,10 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include <plat/dma.h>
+
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
-#include <plat/dma.h>
 
 int omap_lcd_dma_running(void)
 {
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 3e8410a99990..adf00975b9bb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,12 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <mach/irqs.h>
 #include <plat/dma.h>
 #include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
+#include <mach/irqs.h>
+
+#include "iomap.h"
+
 #define DPS_RSTCT2_PER_EN       (1 << 0)
 #define DSP_RSTCT2_WD_PER_EN    (1 << 1)
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 0c2c3669d594..306beaca14c5 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -49,7 +49,6 @@
 #include <asm/mach/irq.h>
 
 #include <plat/cpu.h>
-#include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
@@ -57,6 +56,9 @@
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 
+#include <mach/irqs.h>
+
+#include "iomap.h"
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index 91d199b64979..f255b153b863 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -4,9 +4,10 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <plat/prcm.h>
 
+#include <mach/hardware.h>
+
 void omap1_restart(char mode, const char *cmd)
 {
         /*
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index c875bdc902c5..0779db150da7 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -33,8 +33,12 @@
  */
 
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
 #include <mach/io.h>
+
+#include "iomap.h"
 #include "pm.h"
 
                 .text
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 692587d07ea5..2ce0b9ab20e5 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -9,10 +9,14 @@
  */
 
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
 #include <mach/io.h>
 #include <mach/hardware.h>
 
+#include "iomap.h"
+
         .text
 
 /*
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index b8faffa44f9e..2fae6a2740f1 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,14 +45,15 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "iomap.h"
 #include "common.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 9a54ef4dcf5e..a2e6d0709df2 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -47,14 +47,17 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include "common.h"
+
 #include <plat/dmtimer.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer