1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
new file mode 100644
index 000000000000..dbd4368ab8cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for OMAP
+
+The Highspeed MMC Host Controller on TI OMAP family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible:
+ Should be "ti,omap2-hsmmc", for OMAP2 controllers
+ Should be "ti,omap3-hsmmc", for OMAP3 controllers
+ Should be "ti,omap4-hsmmc", for OMAP4 controllers
+- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
+- reg : should contain hsmmc registers location and length
+
+Optional properties:
+ti,dual-volt: boolean, supports dual voltage cards
+<supply-name>-supply: phandle to the regulator device tree node
+"supply-name" examples are "vmmc", "vmmc_aux" etc
+ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+cd-gpios: GPIOs for card detection
+wp-gpios: GPIOs for write protection
+ti,non-removable: non-removable slot (like eMMC)
+ti,needs-special-reset: Requires a special softreset sequence
+
+Example:
+        mmc1: mmc@0x4809c000 {
+                compatible = "ti,omap4-hsmmc";
+                reg = <0x4809c000 0x400>;
+                ti,hwmods = "mmc1";
+                ti,dual-volt;
+                ti,bus-width = <4>;
+                vmmc-supply = <&vmmc>; /* phandle to regulator node */
+                ti,non-removable;
+        };