1 files changed, 59 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
new file mode 100644
index 000000000000..c6a3469d3436
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77686.txt
@@ -0,0 +1,59 @@
+Maxim MAX77686 multi-function device
+
+MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is
+interfaced to host controller using i2c interface. PMIC and Charger submodules
+are addressed using same i2c slave address whereas RTC submodule uses
+different i2c slave address,presently for which we are statically creating i2c
+client while probing.This document describes the binding for mfd device and
+PMIC submodule.
+
+Required properties:
+- compatible : Must be "maxim,max77686";
+- reg : Specifies the i2c slave address of PMIC block.
+- interrupts : This i2c device has an IRQ line connected to the main SoC.
+- interrupt-parent : The parent interrupt controller.
+
+Optional node:
+- voltage-regulators : The regulators of max77686 have to be instantiated
+  under subnode named "voltage-regulators" using the following format.
+
+        regulator_name {
+                regulator-compatible = LDOn/BUCKn
+                standard regulator constraints....
+        };
+        refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+  The regulator-compatible property of regulator should initialized with string
+to get matched with their hardware counterparts as follow:
+
+        -LDOn   :       for LDOs, where n can lie in range 1 to 26.
+                        example: LDO1, LDO2, LDO26.
+        -BUCKn  :       for BUCKs, where n can lie in range 1 to 9.
+                        example: BUCK1, BUCK5, BUCK9.
+
+Example:
+
+        max77686@09 {
+                compatible = "maxim,max77686";
+                interrupt-parent = <&wakeup_eint>;
+                interrupts = <26 0>;
+                reg = <0x09>;
+
+                voltage-regulators {
+                        ldo11_reg {
+                                regulator-compatible = "LDO11";
+                                regulator-name = "vdd_ldo11";
+                                regulator-min-microvolt = <1900000>;
+                                regulator-max-microvolt = <1900000>;
+                                regulator-always-on;
+                        };
+
+                        buck1_reg {
+                                regulator-compatible = "BUCK1";
+                                regulator-name = "vdd_mif";
+                                regulator-min-microvolt = <950000>;
+                                regulator-max-microvolt = <1300000>;
+                                regulator-always-on;
+                                regulator-boot-on;
+                        };
+        }