diff options
-rw-r--r-- | drivers/power/Kconfig | 7 | ||||
-rw-r--r-- | drivers/power/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/ds2780_battery.c | 853 | ||||
-rw-r--r-- | drivers/w1/slaves/Kconfig | 13 | ||||
-rw-r--r-- | drivers/w1/slaves/Makefile | 1 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_ds2780.c | 217 | ||||
-rw-r--r-- | drivers/w1/slaves/w1_ds2780.h | 129 | ||||
-rw-r--r-- | drivers/w1/w1_family.h | 1 |
8 files changed, 1222 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 52a462fc6b84..dc8c531ed276 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig | |||
@@ -68,6 +68,13 @@ config BATTERY_DS2760 | |||
68 | help | 68 | help |
69 | Say Y here to enable support for batteries with ds2760 chip. | 69 | Say Y here to enable support for batteries with ds2760 chip. |
70 | 70 | ||
71 | config BATTERY_DS2780 | ||
72 | tristate "DS2780 battery driver" | ||
73 | select W1 | ||
74 | select W1_SLAVE_DS2780 | ||
75 | help | ||
76 | Say Y here to enable support for batteries with ds2780 chip. | ||
77 | |||
71 | config BATTERY_DS2782 | 78 | config BATTERY_DS2782 |
72 | tristate "DS2782/DS2786 standalone gas-gauge" | 79 | tristate "DS2782/DS2786 standalone gas-gauge" |
73 | depends on I2C | 80 | depends on I2C |
diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 8385bfae8728..8224990b933d 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile | |||
@@ -15,6 +15,7 @@ obj-$(CONFIG_WM8350_POWER) += wm8350_power.o | |||
15 | obj-$(CONFIG_TEST_POWER) += test_power.o | 15 | obj-$(CONFIG_TEST_POWER) += test_power.o |
16 | 16 | ||
17 | obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o | 17 | obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o |
18 | obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o | ||
18 | obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o | 19 | obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o |
19 | obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o | 20 | obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o |
20 | obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o | 21 | obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o |
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c new file mode 100644 index 000000000000..1fefe82e12e3 --- /dev/null +++ b/drivers/power/ds2780_battery.c | |||
@@ -0,0 +1,853 @@ | |||
1 | /* | ||
2 | * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC | ||
3 | * | ||
4 | * Copyright (C) 2010 Indesign, LLC | ||
5 | * | ||
6 | * Author: Clifton Barnes <cabarnes@indesign-llc.com> | ||
7 | * | ||
8 | * Based on ds2760_battery and ds2782_battery drivers | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify | ||
11 | * it under the terms of the GNU General Public License version 2 as | ||
12 | * published by the Free Software Foundation. | ||
13 | * | ||
14 | */ | ||
15 | |||
16 | #include <linux/module.h> | ||
17 | #include <linux/slab.h> | ||
18 | #include <linux/param.h> | ||
19 | #include <linux/pm.h> | ||
20 | #include <linux/platform_device.h> | ||
21 | #include <linux/power_supply.h> | ||
22 | #include <linux/idr.h> | ||
23 | |||
24 | #include "../w1/w1.h" | ||
25 | #include "../w1/slaves/w1_ds2780.h" | ||
26 | |||
27 | /* Current unit measurement in uA for a 1 milli-ohm sense resistor */ | ||
28 | #define DS2780_CURRENT_UNITS 1563 | ||
29 | /* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */ | ||
30 | #define DS2780_CHARGE_UNITS 6250 | ||
31 | /* Number of bytes in user EEPROM space */ | ||
32 | #define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \ | ||
33 | DS2780_EEPROM_BLOCK0_START + 1) | ||
34 | /* Number of bytes in parameter EEPROM space */ | ||
35 | #define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \ | ||
36 | DS2780_EEPROM_BLOCK1_START + 1) | ||
37 | |||
38 | struct ds2780_device_info { | ||
39 | struct device *dev; | ||
40 | struct power_supply bat; | ||
41 | struct device *w1_dev; | ||
42 | }; | ||
43 | |||
44 | enum current_types { | ||
45 | CURRENT_NOW, | ||
46 | CURRENT_AVG, | ||
47 | }; | ||
48 | |||
49 | static const char model[] = "DS2780"; | ||
50 | static const char manufacturer[] = "Maxim/Dallas"; | ||
51 | |||
52 | static inline struct ds2780_device_info *to_ds2780_device_info( | ||
53 | struct power_supply *psy) | ||
54 | { | ||
55 | return container_of(psy, struct ds2780_device_info, bat); | ||
56 | } | ||
57 | |||
58 | static inline struct power_supply *to_power_supply(struct device *dev) | ||
59 | { | ||
60 | return dev_get_drvdata(dev); | ||
61 | } | ||
62 | |||
63 | static inline int ds2780_read8(struct device *dev, u8 *val, int addr) | ||
64 | { | ||
65 | return w1_ds2780_io(dev, val, addr, sizeof(u8), 0); | ||
66 | } | ||
67 | |||
68 | static int ds2780_read16(struct device *dev, s16 *val, int addr) | ||
69 | { | ||
70 | int ret; | ||
71 | u8 raw[2]; | ||
72 | |||
73 | ret = w1_ds2780_io(dev, raw, addr, sizeof(u8) * 2, 0); | ||
74 | if (ret < 0) | ||
75 | return ret; | ||
76 | |||
77 | *val = (raw[0] << 8) | raw[1]; | ||
78 | |||
79 | return 0; | ||
80 | } | ||
81 | |||
82 | static inline int ds2780_read_block(struct device *dev, u8 *val, int addr, | ||
83 | size_t count) | ||
84 | { | ||
85 | return w1_ds2780_io(dev, val, addr, count, 0); | ||
86 | } | ||
87 | |||
88 | static inline int ds2780_write(struct device *dev, u8 *val, int addr, | ||
89 | size_t count) | ||
90 | { | ||
91 | return w1_ds2780_io(dev, val, addr, count, 1); | ||
92 | } | ||
93 | |||
94 | static inline int ds2780_store_eeprom(struct device *dev, int addr) | ||
95 | { | ||
96 | return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA); | ||
97 | } | ||
98 | |||
99 | static inline int ds2780_recall_eeprom(struct device *dev, int addr) | ||
100 | { | ||
101 | return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA); | ||
102 | } | ||
103 | |||
104 | static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg) | ||
105 | { | ||
106 | int ret; | ||
107 | |||
108 | ret = ds2780_store_eeprom(dev_info->w1_dev, reg); | ||
109 | if (ret < 0) | ||
110 | return ret; | ||
111 | |||
112 | ret = ds2780_recall_eeprom(dev_info->w1_dev, reg); | ||
113 | if (ret < 0) | ||
114 | return ret; | ||
115 | |||
116 | return 0; | ||
117 | } | ||
118 | |||
119 | /* Set sense resistor value in mhos */ | ||
120 | static int ds2780_set_sense_register(struct ds2780_device_info *dev_info, | ||
121 | u8 conductance) | ||
122 | { | ||
123 | int ret; | ||
124 | |||
125 | ret = ds2780_write(dev_info->w1_dev, &conductance, | ||
126 | DS2780_RSNSP_REG, sizeof(u8)); | ||
127 | if (ret < 0) | ||
128 | return ret; | ||
129 | |||
130 | return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG); | ||
131 | } | ||
132 | |||
133 | /* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */ | ||
134 | static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info, | ||
135 | u16 *rsgain) | ||
136 | { | ||
137 | return ds2780_read16(dev_info->w1_dev, rsgain, DS2780_RSGAIN_MSB_REG); | ||
138 | } | ||
139 | |||
140 | /* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */ | ||
141 | static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info, | ||
142 | u16 rsgain) | ||
143 | { | ||
144 | int ret; | ||
145 | u8 raw[] = {rsgain >> 8, rsgain & 0xFF}; | ||
146 | |||
147 | ret = ds2780_write(dev_info->w1_dev, raw, | ||
148 | DS2780_RSGAIN_MSB_REG, sizeof(u8) * 2); | ||
149 | if (ret < 0) | ||
150 | return ret; | ||
151 | |||
152 | return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG); | ||
153 | } | ||
154 | |||
155 | static int ds2780_get_voltage(struct ds2780_device_info *dev_info, | ||
156 | int *voltage_uV) | ||
157 | { | ||
158 | int ret; | ||
159 | s16 voltage_raw; | ||
160 | |||
161 | /* | ||
162 | * The voltage value is located in 10 bits across the voltage MSB | ||
163 | * and LSB registers in two's compliment form | ||
164 | * Sign bit of the voltage value is in bit 7 of the voltage MSB register | ||
165 | * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the | ||
166 | * voltage MSB register | ||
167 | * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the | ||
168 | * voltage LSB register | ||
169 | */ | ||
170 | ret = ds2780_read16(dev_info->w1_dev, &voltage_raw, | ||
171 | DS2780_VOLT_MSB_REG); | ||
172 | if (ret < 0) | ||
173 | return ret; | ||
174 | |||
175 | /* | ||
176 | * DS2780 reports voltage in units of 4.88mV, but the battery class | ||
177 | * reports in units of uV, so convert by multiplying by 4880. | ||
178 | */ | ||
179 | *voltage_uV = (voltage_raw / 32) * 4880; | ||
180 | return 0; | ||
181 | } | ||
182 | |||
183 | static int ds2780_get_temperature(struct ds2780_device_info *dev_info, | ||
184 | int *temperature) | ||
185 | { | ||
186 | int ret; | ||
187 | s16 temperature_raw; | ||
188 | |||
189 | /* | ||
190 | * The temperature value is located in 10 bits across the temperature | ||
191 | * MSB and LSB registers in two's compliment form | ||
192 | * Sign bit of the temperature value is in bit 7 of the temperature | ||
193 | * MSB register | ||
194 | * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the | ||
195 | * temperature MSB register | ||
196 | * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the | ||
197 | * temperature LSB register | ||
198 | */ | ||
199 | ret = ds2780_read16(dev_info->w1_dev, &temperature_raw, | ||
200 | DS2780_TEMP_MSB_REG); | ||
201 | if (ret < 0) | ||
202 | return ret; | ||
203 | |||
204 | /* | ||
205 | * Temperature is measured in units of 0.125 degrees celcius, the | ||
206 | * power_supply class measures temperature in tenths of degrees | ||
207 | * celsius. The temperature value is stored as a 10 bit number, plus | ||
208 | * sign in the upper bits of a 16 bit register. | ||
209 | */ | ||
210 | *temperature = ((temperature_raw / 32) * 125) / 100; | ||
211 | return 0; | ||
212 | } | ||
213 | |||
214 | static int ds2780_get_current(struct ds2780_device_info *dev_info, | ||
215 | enum current_types type, int *current_uA) | ||
216 | { | ||
217 | int ret, sense_res; | ||
218 | s16 current_raw; | ||
219 | u8 sense_res_raw, reg_msb; | ||
220 | |||
221 | /* | ||
222 | * The units of measurement for current are dependent on the value of | ||
223 | * the sense resistor. | ||
224 | */ | ||
225 | ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG); | ||
226 | if (ret < 0) | ||
227 | return ret; | ||
228 | |||
229 | if (sense_res_raw == 0) { | ||
230 | dev_err(dev_info->dev, "sense resistor value is 0\n"); | ||
231 | return -ENXIO; | ||
232 | } | ||
233 | sense_res = 1000 / sense_res_raw; | ||
234 | |||
235 | if (type == CURRENT_NOW) | ||
236 | reg_msb = DS2780_CURRENT_MSB_REG; | ||
237 | else if (type == CURRENT_AVG) | ||
238 | reg_msb = DS2780_IAVG_MSB_REG; | ||
239 | else | ||
240 | return -EINVAL; | ||
241 | |||
242 | /* | ||
243 | * The current value is located in 16 bits across the current MSB | ||
244 | * and LSB registers in two's compliment form | ||
245 | * Sign bit of the current value is in bit 7 of the current MSB register | ||
246 | * Bits 14 - 8 of the current value are in bits 6 - 0 of the current | ||
247 | * MSB register | ||
248 | * Bits 7 - 0 of the current value are in bits 7 - 0 of the current | ||
249 | * LSB register | ||
250 | */ | ||
251 | ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, reg_msb); | ||
252 | if (ret < 0) | ||
253 | return ret; | ||
254 | |||
255 | *current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res); | ||
256 | return 0; | ||
257 | } | ||
258 | |||
259 | static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info, | ||
260 | int *accumulated_current) | ||
261 | { | ||
262 | int ret, sense_res; | ||
263 | s16 current_raw; | ||
264 | u8 sense_res_raw; | ||
265 | |||
266 | /* | ||
267 | * The units of measurement for accumulated current are dependent on | ||
268 | * the value of the sense resistor. | ||
269 | */ | ||
270 | ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG); | ||
271 | if (ret < 0) | ||
272 | return ret; | ||
273 | |||
274 | if (sense_res_raw == 0) { | ||
275 | dev_err(dev_info->dev, "sense resistor value is 0\n"); | ||
276 | return -ENXIO; | ||
277 | } | ||
278 | sense_res = 1000 / sense_res_raw; | ||
279 | |||
280 | /* | ||
281 | * The ACR value is located in 16 bits across the ACR MSB and | ||
282 | * LSB registers | ||
283 | * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR | ||
284 | * MSB register | ||
285 | * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR | ||
286 | * LSB register | ||
287 | */ | ||
288 | ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, DS2780_ACR_MSB_REG); | ||
289 | if (ret < 0) | ||
290 | return ret; | ||
291 | |||
292 | *accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res); | ||
293 | return 0; | ||
294 | } | ||
295 | |||
296 | static int ds2780_get_capacity(struct ds2780_device_info *dev_info, | ||
297 | int *capacity) | ||
298 | { | ||
299 | int ret; | ||
300 | u8 raw; | ||
301 | |||
302 | ret = ds2780_read8(dev_info->w1_dev, &raw, DS2780_RARC_REG); | ||
303 | if (ret < 0) | ||
304 | return ret; | ||
305 | |||
306 | *capacity = raw; | ||
307 | return raw; | ||
308 | } | ||
309 | |||
310 | static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status) | ||
311 | { | ||
312 | int ret, current_uA, capacity; | ||
313 | |||
314 | ret = ds2780_get_current(dev_info, CURRENT_NOW, ¤t_uA); | ||
315 | if (ret < 0) | ||
316 | return ret; | ||
317 | |||
318 | ret = ds2780_get_capacity(dev_info, &capacity); | ||
319 | if (ret < 0) | ||
320 | return ret; | ||
321 | |||
322 | if (capacity == 100) | ||
323 | *status = POWER_SUPPLY_STATUS_FULL; | ||
324 | else if (current_uA == 0) | ||
325 | *status = POWER_SUPPLY_STATUS_NOT_CHARGING; | ||
326 | else if (current_uA < 0) | ||
327 | *status = POWER_SUPPLY_STATUS_DISCHARGING; | ||
328 | else | ||
329 | *status = POWER_SUPPLY_STATUS_CHARGING; | ||
330 | |||
331 | return 0; | ||
332 | } | ||
333 | |||
334 | static int ds2780_get_charge_now(struct ds2780_device_info *dev_info, | ||
335 | int *charge_now) | ||
336 | { | ||
337 | int ret; | ||
338 | u16 charge_raw; | ||
339 | |||
340 | /* | ||
341 | * The RAAC value is located in 16 bits across the RAAC MSB and | ||
342 | * LSB registers | ||
343 | * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC | ||
344 | * MSB register | ||
345 | * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC | ||
346 | * LSB register | ||
347 | */ | ||
348 | ret = ds2780_read16(dev_info->w1_dev, &charge_raw, DS2780_RAAC_MSB_REG); | ||
349 | if (ret < 0) | ||
350 | return ret; | ||
351 | |||
352 | *charge_now = charge_raw * 1600; | ||
353 | return 0; | ||
354 | } | ||
355 | |||
356 | static int ds2780_get_control_register(struct ds2780_device_info *dev_info, | ||
357 | u8 *control_reg) | ||
358 | { | ||
359 | return ds2780_read8(dev_info->w1_dev, control_reg, DS2780_CONTROL_REG); | ||
360 | } | ||
361 | |||
362 | static int ds2780_set_control_register(struct ds2780_device_info *dev_info, | ||
363 | u8 control_reg) | ||
364 | { | ||
365 | int ret; | ||
366 | |||
367 | ret = ds2780_write(dev_info->w1_dev, &control_reg, | ||
368 | DS2780_CONTROL_REG, sizeof(u8)); | ||
369 | if (ret < 0) | ||
370 | return ret; | ||
371 | |||
372 | return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG); | ||
373 | } | ||
374 | |||
375 | static int ds2780_battery_get_property(struct power_supply *psy, | ||
376 | enum power_supply_property psp, | ||
377 | union power_supply_propval *val) | ||
378 | { | ||
379 | int ret = 0; | ||
380 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
381 | |||
382 | switch (psp) { | ||
383 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | ||
384 | ret = ds2780_get_voltage(dev_info, &val->intval); | ||
385 | break; | ||
386 | |||
387 | case POWER_SUPPLY_PROP_TEMP: | ||
388 | ret = ds2780_get_temperature(dev_info, &val->intval); | ||
389 | break; | ||
390 | |||
391 | case POWER_SUPPLY_PROP_MODEL_NAME: | ||
392 | val->strval = model; | ||
393 | break; | ||
394 | |||
395 | case POWER_SUPPLY_PROP_MANUFACTURER: | ||
396 | val->strval = manufacturer; | ||
397 | break; | ||
398 | |||
399 | case POWER_SUPPLY_PROP_CURRENT_NOW: | ||
400 | ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval); | ||
401 | break; | ||
402 | |||
403 | case POWER_SUPPLY_PROP_CURRENT_AVG: | ||
404 | ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval); | ||
405 | break; | ||
406 | |||
407 | case POWER_SUPPLY_PROP_STATUS: | ||
408 | ret = ds2780_get_status(dev_info, &val->intval); | ||
409 | break; | ||
410 | |||
411 | case POWER_SUPPLY_PROP_CAPACITY: | ||
412 | ret = ds2780_get_capacity(dev_info, &val->intval); | ||
413 | break; | ||
414 | |||
415 | case POWER_SUPPLY_PROP_CHARGE_COUNTER: | ||
416 | ret = ds2780_get_accumulated_current(dev_info, &val->intval); | ||
417 | break; | ||
418 | |||
419 | case POWER_SUPPLY_PROP_CHARGE_NOW: | ||
420 | ret = ds2780_get_charge_now(dev_info, &val->intval); | ||
421 | break; | ||
422 | |||
423 | default: | ||
424 | ret = -EINVAL; | ||
425 | } | ||
426 | |||
427 | return ret; | ||
428 | } | ||
429 | |||
430 | static enum power_supply_property ds2780_battery_props[] = { | ||
431 | POWER_SUPPLY_PROP_STATUS, | ||
432 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | ||
433 | POWER_SUPPLY_PROP_TEMP, | ||
434 | POWER_SUPPLY_PROP_MODEL_NAME, | ||
435 | POWER_SUPPLY_PROP_MANUFACTURER, | ||
436 | POWER_SUPPLY_PROP_CURRENT_NOW, | ||
437 | POWER_SUPPLY_PROP_CURRENT_AVG, | ||
438 | POWER_SUPPLY_PROP_CAPACITY, | ||
439 | POWER_SUPPLY_PROP_CHARGE_COUNTER, | ||
440 | POWER_SUPPLY_PROP_CHARGE_NOW, | ||
441 | }; | ||
442 | |||
443 | static ssize_t ds2780_get_pmod_enabled(struct device *dev, | ||
444 | struct device_attribute *attr, | ||
445 | char *buf) | ||
446 | { | ||
447 | int ret; | ||
448 | u8 control_reg; | ||
449 | struct power_supply *psy = to_power_supply(dev); | ||
450 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
451 | |||
452 | /* Get power mode */ | ||
453 | ret = ds2780_get_control_register(dev_info, &control_reg); | ||
454 | if (ret < 0) | ||
455 | return ret; | ||
456 | |||
457 | return sprintf(buf, "%d\n", | ||
458 | !!(control_reg & DS2780_CONTROL_REG_PMOD)); | ||
459 | } | ||
460 | |||
461 | static ssize_t ds2780_set_pmod_enabled(struct device *dev, | ||
462 | struct device_attribute *attr, | ||
463 | const char *buf, | ||
464 | size_t count) | ||
465 | { | ||
466 | int ret; | ||
467 | u8 control_reg, new_setting; | ||
468 | struct power_supply *psy = to_power_supply(dev); | ||
469 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
470 | |||
471 | /* Set power mode */ | ||
472 | ret = ds2780_get_control_register(dev_info, &control_reg); | ||
473 | if (ret < 0) | ||
474 | return ret; | ||
475 | |||
476 | ret = kstrtou8(buf, 0, &new_setting); | ||
477 | if (ret < 0) | ||
478 | return ret; | ||
479 | |||
480 | if ((new_setting != 0) && (new_setting != 1)) { | ||
481 | dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n"); | ||
482 | return -EINVAL; | ||
483 | } | ||
484 | |||
485 | if (new_setting) | ||
486 | control_reg |= DS2780_CONTROL_REG_PMOD; | ||
487 | else | ||
488 | control_reg &= ~DS2780_CONTROL_REG_PMOD; | ||
489 | |||
490 | ret = ds2780_set_control_register(dev_info, control_reg); | ||
491 | if (ret < 0) | ||
492 | return ret; | ||
493 | |||
494 | return count; | ||
495 | } | ||
496 | |||
497 | static ssize_t ds2780_get_sense_resistor_value(struct device *dev, | ||
498 | struct device_attribute *attr, | ||
499 | char *buf) | ||
500 | { | ||
501 | int ret; | ||
502 | u8 sense_resistor; | ||
503 | struct power_supply *psy = to_power_supply(dev); | ||
504 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
505 | |||
506 | ret = ds2780_read8(dev_info->w1_dev, &sense_resistor, DS2780_RSNSP_REG); | ||
507 | if (ret < 0) | ||
508 | return ret; | ||
509 | |||
510 | ret = sprintf(buf, "%d\n", sense_resistor); | ||
511 | return ret; | ||
512 | } | ||
513 | |||
514 | static ssize_t ds2780_set_sense_resistor_value(struct device *dev, | ||
515 | struct device_attribute *attr, | ||
516 | const char *buf, | ||
517 | size_t count) | ||
518 | { | ||
519 | int ret; | ||
520 | u8 new_setting; | ||
521 | struct power_supply *psy = to_power_supply(dev); | ||
522 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
523 | |||
524 | ret = kstrtou8(buf, 0, &new_setting); | ||
525 | if (ret < 0) | ||
526 | return ret; | ||
527 | |||
528 | ret = ds2780_set_sense_register(dev_info, new_setting); | ||
529 | if (ret < 0) | ||
530 | return ret; | ||
531 | |||
532 | return count; | ||
533 | } | ||
534 | |||
535 | static ssize_t ds2780_get_rsgain_setting(struct device *dev, | ||
536 | struct device_attribute *attr, | ||
537 | char *buf) | ||
538 | { | ||
539 | int ret; | ||
540 | u16 rsgain; | ||
541 | struct power_supply *psy = to_power_supply(dev); | ||
542 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
543 | |||
544 | ret = ds2780_get_rsgain_register(dev_info, &rsgain); | ||
545 | if (ret < 0) | ||
546 | return ret; | ||
547 | |||
548 | return sprintf(buf, "%d\n", rsgain); | ||
549 | } | ||
550 | |||
551 | static ssize_t ds2780_set_rsgain_setting(struct device *dev, | ||
552 | struct device_attribute *attr, | ||
553 | const char *buf, | ||
554 | size_t count) | ||
555 | { | ||
556 | int ret; | ||
557 | u16 new_setting; | ||
558 | struct power_supply *psy = to_power_supply(dev); | ||
559 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
560 | |||
561 | ret = kstrtou16(buf, 0, &new_setting); | ||
562 | if (ret < 0) | ||
563 | return ret; | ||
564 | |||
565 | /* Gain can only be from 0 to 1.999 in steps of .001 */ | ||
566 | if (new_setting > 1999) { | ||
567 | dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n"); | ||
568 | return -EINVAL; | ||
569 | } | ||
570 | |||
571 | ret = ds2780_set_rsgain_register(dev_info, new_setting); | ||
572 | if (ret < 0) | ||
573 | return ret; | ||
574 | |||
575 | return count; | ||
576 | } | ||
577 | |||
578 | static ssize_t ds2780_get_pio_pin(struct device *dev, | ||
579 | struct device_attribute *attr, | ||
580 | char *buf) | ||
581 | { | ||
582 | int ret; | ||
583 | u8 sfr; | ||
584 | struct power_supply *psy = to_power_supply(dev); | ||
585 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
586 | |||
587 | ret = ds2780_read8(dev_info->w1_dev, &sfr, DS2780_SFR_REG); | ||
588 | if (ret < 0) | ||
589 | return ret; | ||
590 | |||
591 | ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC); | ||
592 | return ret; | ||
593 | } | ||
594 | |||
595 | static ssize_t ds2780_set_pio_pin(struct device *dev, | ||
596 | struct device_attribute *attr, | ||
597 | const char *buf, | ||
598 | size_t count) | ||
599 | { | ||
600 | int ret; | ||
601 | u8 new_setting; | ||
602 | struct power_supply *psy = to_power_supply(dev); | ||
603 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
604 | |||
605 | ret = kstrtou8(buf, 0, &new_setting); | ||
606 | if (ret < 0) | ||
607 | return ret; | ||
608 | |||
609 | if ((new_setting != 0) && (new_setting != 1)) { | ||
610 | dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n"); | ||
611 | return -EINVAL; | ||
612 | } | ||
613 | |||
614 | ret = ds2780_write(dev_info->w1_dev, &new_setting, | ||
615 | DS2780_SFR_REG, sizeof(u8)); | ||
616 | if (ret < 0) | ||
617 | return ret; | ||
618 | |||
619 | return count; | ||
620 | } | ||
621 | |||
622 | static ssize_t ds2780_read_param_eeprom_bin(struct file *filp, | ||
623 | struct kobject *kobj, | ||
624 | struct bin_attribute *bin_attr, | ||
625 | char *buf, loff_t off, size_t count) | ||
626 | { | ||
627 | struct device *dev = container_of(kobj, struct device, kobj); | ||
628 | struct power_supply *psy = to_power_supply(dev); | ||
629 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
630 | |||
631 | count = min_t(loff_t, count, | ||
632 | DS2780_EEPROM_BLOCK1_END - | ||
633 | DS2780_EEPROM_BLOCK1_START + 1 - off); | ||
634 | |||
635 | return ds2780_read_block(dev_info->w1_dev, buf, | ||
636 | DS2780_EEPROM_BLOCK1_START + off, count); | ||
637 | } | ||
638 | |||
639 | static ssize_t ds2780_write_param_eeprom_bin(struct file *filp, | ||
640 | struct kobject *kobj, | ||
641 | struct bin_attribute *bin_attr, | ||
642 | char *buf, loff_t off, size_t count) | ||
643 | { | ||
644 | struct device *dev = container_of(kobj, struct device, kobj); | ||
645 | struct power_supply *psy = to_power_supply(dev); | ||
646 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
647 | int ret; | ||
648 | |||
649 | count = min_t(loff_t, count, | ||
650 | DS2780_EEPROM_BLOCK1_END - | ||
651 | DS2780_EEPROM_BLOCK1_START + 1 - off); | ||
652 | |||
653 | ret = ds2780_write(dev_info->w1_dev, buf, | ||
654 | DS2780_EEPROM_BLOCK1_START + off, count); | ||
655 | if (ret < 0) | ||
656 | return ret; | ||
657 | |||
658 | ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START); | ||
659 | if (ret < 0) | ||
660 | return ret; | ||
661 | |||
662 | return count; | ||
663 | } | ||
664 | |||
665 | static struct bin_attribute ds2780_param_eeprom_bin_attr = { | ||
666 | .attr = { | ||
667 | .name = "param_eeprom", | ||
668 | .mode = S_IRUGO | S_IWUSR, | ||
669 | }, | ||
670 | .size = DS2780_EEPROM_BLOCK1_END - DS2780_EEPROM_BLOCK1_START + 1, | ||
671 | .read = ds2780_read_param_eeprom_bin, | ||
672 | .write = ds2780_write_param_eeprom_bin, | ||
673 | }; | ||
674 | |||
675 | static ssize_t ds2780_read_user_eeprom_bin(struct file *filp, | ||
676 | struct kobject *kobj, | ||
677 | struct bin_attribute *bin_attr, | ||
678 | char *buf, loff_t off, size_t count) | ||
679 | { | ||
680 | struct device *dev = container_of(kobj, struct device, kobj); | ||
681 | struct power_supply *psy = to_power_supply(dev); | ||
682 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
683 | |||
684 | count = min_t(loff_t, count, | ||
685 | DS2780_EEPROM_BLOCK0_END - | ||
686 | DS2780_EEPROM_BLOCK0_START + 1 - off); | ||
687 | |||
688 | return ds2780_read_block(dev_info->w1_dev, buf, | ||
689 | DS2780_EEPROM_BLOCK0_START + off, count); | ||
690 | |||
691 | } | ||
692 | |||
693 | static ssize_t ds2780_write_user_eeprom_bin(struct file *filp, | ||
694 | struct kobject *kobj, | ||
695 | struct bin_attribute *bin_attr, | ||
696 | char *buf, loff_t off, size_t count) | ||
697 | { | ||
698 | struct device *dev = container_of(kobj, struct device, kobj); | ||
699 | struct power_supply *psy = to_power_supply(dev); | ||
700 | struct ds2780_device_info *dev_info = to_ds2780_device_info(psy); | ||
701 | int ret; | ||
702 | |||
703 | count = min_t(loff_t, count, | ||
704 | DS2780_EEPROM_BLOCK0_END - | ||
705 | DS2780_EEPROM_BLOCK0_START + 1 - off); | ||
706 | |||
707 | ret = ds2780_write(dev_info->w1_dev, buf, | ||
708 | DS2780_EEPROM_BLOCK0_START + off, count); | ||
709 | if (ret < 0) | ||
710 | return ret; | ||
711 | |||
712 | ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START); | ||
713 | if (ret < 0) | ||
714 | return ret; | ||
715 | |||
716 | return count; | ||
717 | } | ||
718 | |||
719 | static struct bin_attribute ds2780_user_eeprom_bin_attr = { | ||
720 | .attr = { | ||
721 | .name = "user_eeprom", | ||
722 | .mode = S_IRUGO | S_IWUSR, | ||
723 | }, | ||
724 | .size = DS2780_EEPROM_BLOCK0_END - DS2780_EEPROM_BLOCK0_START + 1, | ||
725 | .read = ds2780_read_user_eeprom_bin, | ||
726 | .write = ds2780_write_user_eeprom_bin, | ||
727 | }; | ||
728 | |||
729 | static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled, | ||
730 | ds2780_set_pmod_enabled); | ||
731 | static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR, | ||
732 | ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value); | ||
733 | static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting, | ||
734 | ds2780_set_rsgain_setting); | ||
735 | static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin, | ||
736 | ds2780_set_pio_pin); | ||
737 | |||
738 | |||
739 | static struct attribute *ds2780_attributes[] = { | ||
740 | &dev_attr_pmod_enabled.attr, | ||
741 | &dev_attr_sense_resistor_value.attr, | ||
742 | &dev_attr_rsgain_setting.attr, | ||
743 | &dev_attr_pio_pin.attr, | ||
744 | NULL | ||
745 | }; | ||
746 | |||
747 | static const struct attribute_group ds2780_attr_group = { | ||
748 | .attrs = ds2780_attributes, | ||
749 | }; | ||
750 | |||
751 | static int __devinit ds2780_battery_probe(struct platform_device *pdev) | ||
752 | { | ||
753 | int ret = 0; | ||
754 | struct ds2780_device_info *dev_info; | ||
755 | |||
756 | dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL); | ||
757 | if (!dev_info) { | ||
758 | ret = -ENOMEM; | ||
759 | goto fail; | ||
760 | } | ||
761 | |||
762 | platform_set_drvdata(pdev, dev_info); | ||
763 | |||
764 | dev_info->dev = &pdev->dev; | ||
765 | dev_info->w1_dev = pdev->dev.parent; | ||
766 | dev_info->bat.name = dev_name(&pdev->dev); | ||
767 | dev_info->bat.type = POWER_SUPPLY_TYPE_BATTERY; | ||
768 | dev_info->bat.properties = ds2780_battery_props; | ||
769 | dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props); | ||
770 | dev_info->bat.get_property = ds2780_battery_get_property; | ||
771 | |||
772 | ret = power_supply_register(&pdev->dev, &dev_info->bat); | ||
773 | if (ret) { | ||
774 | dev_err(dev_info->dev, "failed to register battery\n"); | ||
775 | goto fail_free_info; | ||
776 | } | ||
777 | |||
778 | ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); | ||
779 | if (ret) { | ||
780 | dev_err(dev_info->dev, "failed to create sysfs group\n"); | ||
781 | goto fail_unregister; | ||
782 | } | ||
783 | |||
784 | ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj, | ||
785 | &ds2780_param_eeprom_bin_attr); | ||
786 | if (ret) { | ||
787 | dev_err(dev_info->dev, | ||
788 | "failed to create param eeprom bin file"); | ||
789 | goto fail_remove_group; | ||
790 | } | ||
791 | |||
792 | ret = sysfs_create_bin_file(&dev_info->bat.dev->kobj, | ||
793 | &ds2780_user_eeprom_bin_attr); | ||
794 | if (ret) { | ||
795 | dev_err(dev_info->dev, | ||
796 | "failed to create user eeprom bin file"); | ||
797 | goto fail_remove_bin_file; | ||
798 | } | ||
799 | |||
800 | return 0; | ||
801 | |||
802 | fail_remove_bin_file: | ||
803 | sysfs_remove_bin_file(&dev_info->bat.dev->kobj, | ||
804 | &ds2780_param_eeprom_bin_attr); | ||
805 | fail_remove_group: | ||
806 | sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); | ||
807 | fail_unregister: | ||
808 | power_supply_unregister(&dev_info->bat); | ||
809 | fail_free_info: | ||
810 | kfree(dev_info); | ||
811 | fail: | ||
812 | return ret; | ||
813 | } | ||
814 | |||
815 | static int __devexit ds2780_battery_remove(struct platform_device *pdev) | ||
816 | { | ||
817 | struct ds2780_device_info *dev_info = platform_get_drvdata(pdev); | ||
818 | |||
819 | /* remove attributes */ | ||
820 | sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); | ||
821 | |||
822 | power_supply_unregister(&dev_info->bat); | ||
823 | |||
824 | kfree(dev_info); | ||
825 | return 0; | ||
826 | } | ||
827 | |||
828 | MODULE_ALIAS("platform:ds2780-battery"); | ||
829 | |||
830 | static struct platform_driver ds2780_battery_driver = { | ||
831 | .driver = { | ||
832 | .name = "ds2780-battery", | ||
833 | }, | ||
834 | .probe = ds2780_battery_probe, | ||
835 | .remove = ds2780_battery_remove, | ||
836 | }; | ||
837 | |||
838 | static int __init ds2780_battery_init(void) | ||
839 | { | ||
840 | return platform_driver_register(&ds2780_battery_driver); | ||
841 | } | ||
842 | |||
843 | static void __exit ds2780_battery_exit(void) | ||
844 | { | ||
845 | platform_driver_unregister(&ds2780_battery_driver); | ||
846 | } | ||
847 | |||
848 | module_init(ds2780_battery_init); | ||
849 | module_exit(ds2780_battery_exit); | ||
850 | |||
851 | MODULE_LICENSE("GPL"); | ||
852 | MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); | ||
853 | MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauage IC driver"); | ||
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index cd1b72411bd4..d0cb01b42012 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig | |||
@@ -68,6 +68,19 @@ config W1_SLAVE_DS2760 | |||
68 | 68 | ||
69 | If you are unsure, say N. | 69 | If you are unsure, say N. |
70 | 70 | ||
71 | config W1_SLAVE_DS2780 | ||
72 | tristate "Dallas 2780 battery monitor chip" | ||
73 | depends on W1 | ||
74 | help | ||
75 | If you enable this you will have the DS2780 battery monitor | ||
76 | chip support. | ||
77 | |||
78 | The battery monitor chip is used in many batteries/devices | ||
79 | as the one who is responsible for charging/discharging/monitoring | ||
80 | Li+ batteries. | ||
81 | |||
82 | If you are unsure, say N. | ||
83 | |||
71 | config W1_SLAVE_BQ27000 | 84 | config W1_SLAVE_BQ27000 |
72 | tristate "BQ27000 slave support" | 85 | tristate "BQ27000 slave support" |
73 | depends on W1 | 86 | depends on W1 |
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 75e3913910bb..1f31e9fb0b25 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile | |||
@@ -9,4 +9,5 @@ obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o | |||
9 | obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o | 9 | obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o |
10 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o | 10 | obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o |
11 | obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o | 11 | obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o |
12 | obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o | ||
12 | obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o | 13 | obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o |
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c new file mode 100644 index 000000000000..274c8f38303f --- /dev/null +++ b/drivers/w1/slaves/w1_ds2780.c | |||
@@ -0,0 +1,217 @@ | |||
1 | /* | ||
2 | * 1-Wire implementation for the ds2780 chip | ||
3 | * | ||
4 | * Copyright (C) 2010 Indesign, LLC | ||
5 | * | ||
6 | * Author: Clifton Barnes <cabarnes@indesign-llc.com> | ||
7 | * | ||
8 | * Based on w1-ds2760 driver | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify | ||
11 | * it under the terms of the GNU General Public License version 2 as | ||
12 | * published by the Free Software Foundation. | ||
13 | * | ||
14 | */ | ||
15 | |||
16 | #include <linux/kernel.h> | ||
17 | #include <linux/module.h> | ||
18 | #include <linux/device.h> | ||
19 | #include <linux/types.h> | ||
20 | #include <linux/platform_device.h> | ||
21 | #include <linux/mutex.h> | ||
22 | #include <linux/idr.h> | ||
23 | |||
24 | #include "../w1.h" | ||
25 | #include "../w1_int.h" | ||
26 | #include "../w1_family.h" | ||
27 | #include "w1_ds2780.h" | ||
28 | |||
29 | int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count, | ||
30 | int io) | ||
31 | { | ||
32 | struct w1_slave *sl = container_of(dev, struct w1_slave, dev); | ||
33 | |||
34 | if (!dev) | ||
35 | return -ENODEV; | ||
36 | |||
37 | mutex_lock(&sl->master->mutex); | ||
38 | |||
39 | if (addr > DS2780_DATA_SIZE || addr < 0) { | ||
40 | count = 0; | ||
41 | goto out; | ||
42 | } | ||
43 | count = min_t(int, count, DS2780_DATA_SIZE - addr); | ||
44 | |||
45 | if (w1_reset_select_slave(sl) == 0) { | ||
46 | if (io) { | ||
47 | w1_write_8(sl->master, W1_DS2780_WRITE_DATA); | ||
48 | w1_write_8(sl->master, addr); | ||
49 | w1_write_block(sl->master, buf, count); | ||
50 | /* XXX w1_write_block returns void, not n_written */ | ||
51 | } else { | ||
52 | w1_write_8(sl->master, W1_DS2780_READ_DATA); | ||
53 | w1_write_8(sl->master, addr); | ||
54 | count = w1_read_block(sl->master, buf, count); | ||
55 | } | ||
56 | } | ||
57 | |||
58 | out: | ||
59 | mutex_unlock(&sl->master->mutex); | ||
60 | |||
61 | return count; | ||
62 | } | ||
63 | EXPORT_SYMBOL(w1_ds2780_io); | ||
64 | |||
65 | int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd) | ||
66 | { | ||
67 | struct w1_slave *sl = container_of(dev, struct w1_slave, dev); | ||
68 | |||
69 | if (!dev) | ||
70 | return -EINVAL; | ||
71 | |||
72 | mutex_lock(&sl->master->mutex); | ||
73 | |||
74 | if (w1_reset_select_slave(sl) == 0) { | ||
75 | w1_write_8(sl->master, cmd); | ||
76 | w1_write_8(sl->master, addr); | ||
77 | } | ||
78 | |||
79 | mutex_unlock(&sl->master->mutex); | ||
80 | return 0; | ||
81 | } | ||
82 | EXPORT_SYMBOL(w1_ds2780_eeprom_cmd); | ||
83 | |||
84 | static ssize_t w1_ds2780_read_bin(struct file *filp, | ||
85 | struct kobject *kobj, | ||
86 | struct bin_attribute *bin_attr, | ||
87 | char *buf, loff_t off, size_t count) | ||
88 | { | ||
89 | struct device *dev = container_of(kobj, struct device, kobj); | ||
90 | return w1_ds2780_io(dev, buf, off, count, 0); | ||
91 | } | ||
92 | |||
93 | static struct bin_attribute w1_ds2780_bin_attr = { | ||
94 | .attr = { | ||
95 | .name = "w1_slave", | ||
96 | .mode = S_IRUGO, | ||
97 | }, | ||
98 | .size = DS2780_DATA_SIZE, | ||
99 | .read = w1_ds2780_read_bin, | ||
100 | }; | ||
101 | |||
102 | static DEFINE_IDR(bat_idr); | ||
103 | static DEFINE_MUTEX(bat_idr_lock); | ||
104 | |||
105 | static int new_bat_id(void) | ||
106 | { | ||
107 | int ret; | ||
108 | |||
109 | while (1) { | ||
110 | int id; | ||
111 | |||
112 | ret = idr_pre_get(&bat_idr, GFP_KERNEL); | ||
113 | if (ret == 0) | ||
114 | return -ENOMEM; | ||
115 | |||
116 | mutex_lock(&bat_idr_lock); | ||
117 | ret = idr_get_new(&bat_idr, NULL, &id); | ||
118 | mutex_unlock(&bat_idr_lock); | ||
119 | |||
120 | if (ret == 0) { | ||
121 | ret = id & MAX_ID_MASK; | ||
122 | break; | ||
123 | } else if (ret == -EAGAIN) { | ||
124 | continue; | ||
125 | } else { | ||
126 | break; | ||
127 | } | ||
128 | } | ||
129 | |||
130 | return ret; | ||
131 | } | ||
132 | |||
133 | static void release_bat_id(int id) | ||
134 | { | ||
135 | mutex_lock(&bat_idr_lock); | ||
136 | idr_remove(&bat_idr, id); | ||
137 | mutex_unlock(&bat_idr_lock); | ||
138 | } | ||
139 | |||
140 | static int w1_ds2780_add_slave(struct w1_slave *sl) | ||
141 | { | ||
142 | int ret; | ||
143 | int id; | ||
144 | struct platform_device *pdev; | ||
145 | |||
146 | id = new_bat_id(); | ||
147 | if (id < 0) { | ||
148 | ret = id; | ||
149 | goto noid; | ||
150 | } | ||
151 | |||
152 | pdev = platform_device_alloc("ds2780-battery", id); | ||
153 | if (!pdev) { | ||
154 | ret = -ENOMEM; | ||
155 | goto pdev_alloc_failed; | ||
156 | } | ||
157 | pdev->dev.parent = &sl->dev; | ||
158 | |||
159 | ret = platform_device_add(pdev); | ||
160 | if (ret) | ||
161 | goto pdev_add_failed; | ||
162 | |||
163 | ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr); | ||
164 | if (ret) | ||
165 | goto bin_attr_failed; | ||
166 | |||
167 | dev_set_drvdata(&sl->dev, pdev); | ||
168 | |||
169 | return 0; | ||
170 | |||
171 | bin_attr_failed: | ||
172 | pdev_add_failed: | ||
173 | platform_device_unregister(pdev); | ||
174 | pdev_alloc_failed: | ||
175 | release_bat_id(id); | ||
176 | noid: | ||
177 | return ret; | ||
178 | } | ||
179 | |||
180 | static void w1_ds2780_remove_slave(struct w1_slave *sl) | ||
181 | { | ||
182 | struct platform_device *pdev = dev_get_drvdata(&sl->dev); | ||
183 | int id = pdev->id; | ||
184 | |||
185 | platform_device_unregister(pdev); | ||
186 | release_bat_id(id); | ||
187 | sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr); | ||
188 | } | ||
189 | |||
190 | static struct w1_family_ops w1_ds2780_fops = { | ||
191 | .add_slave = w1_ds2780_add_slave, | ||
192 | .remove_slave = w1_ds2780_remove_slave, | ||
193 | }; | ||
194 | |||
195 | static struct w1_family w1_ds2780_family = { | ||
196 | .fid = W1_FAMILY_DS2780, | ||
197 | .fops = &w1_ds2780_fops, | ||
198 | }; | ||
199 | |||
200 | static int __init w1_ds2780_init(void) | ||
201 | { | ||
202 | idr_init(&bat_idr); | ||
203 | return w1_register_family(&w1_ds2780_family); | ||
204 | } | ||
205 | |||
206 | static void __exit w1_ds2780_exit(void) | ||
207 | { | ||
208 | w1_unregister_family(&w1_ds2780_family); | ||
209 | idr_destroy(&bat_idr); | ||
210 | } | ||
211 | |||
212 | module_init(w1_ds2780_init); | ||
213 | module_exit(w1_ds2780_exit); | ||
214 | |||
215 | MODULE_LICENSE("GPL"); | ||
216 | MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); | ||
217 | MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC"); | ||
diff --git a/drivers/w1/slaves/w1_ds2780.h b/drivers/w1/slaves/w1_ds2780.h new file mode 100644 index 000000000000..a1fba79eb1b5 --- /dev/null +++ b/drivers/w1/slaves/w1_ds2780.h | |||
@@ -0,0 +1,129 @@ | |||
1 | /* | ||
2 | * 1-Wire implementation for the ds2780 chip | ||
3 | * | ||
4 | * Copyright (C) 2010 Indesign, LLC | ||
5 | * | ||
6 | * Author: Clifton Barnes <cabarnes@indesign-llc.com> | ||
7 | * | ||
8 | * Based on w1-ds2760 driver | ||
9 | * | ||
10 | * This program is free software; you can redistribute it and/or modify | ||
11 | * it under the terms of the GNU General Public License version 2 as | ||
12 | * published by the Free Software Foundation. | ||
13 | * | ||
14 | */ | ||
15 | |||
16 | #ifndef _W1_DS2780_H | ||
17 | #define _W1_DS2780_H | ||
18 | |||
19 | /* Function commands */ | ||
20 | #define W1_DS2780_READ_DATA 0x69 | ||
21 | #define W1_DS2780_WRITE_DATA 0x6C | ||
22 | #define W1_DS2780_COPY_DATA 0x48 | ||
23 | #define W1_DS2780_RECALL_DATA 0xB8 | ||
24 | #define W1_DS2780_LOCK 0x6A | ||
25 | |||
26 | /* Register map */ | ||
27 | /* Register 0x00 Reserved */ | ||
28 | #define DS2780_STATUS_REG 0x01 | ||
29 | #define DS2780_RAAC_MSB_REG 0x02 | ||
30 | #define DS2780_RAAC_LSB_REG 0x03 | ||
31 | #define DS2780_RSAC_MSB_REG 0x04 | ||
32 | #define DS2780_RSAC_LSB_REG 0x05 | ||
33 | #define DS2780_RARC_REG 0x06 | ||
34 | #define DS2780_RSRC_REG 0x07 | ||
35 | #define DS2780_IAVG_MSB_REG 0x08 | ||
36 | #define DS2780_IAVG_LSB_REG 0x09 | ||
37 | #define DS2780_TEMP_MSB_REG 0x0A | ||
38 | #define DS2780_TEMP_LSB_REG 0x0B | ||
39 | #define DS2780_VOLT_MSB_REG 0x0C | ||
40 | #define DS2780_VOLT_LSB_REG 0x0D | ||
41 | #define DS2780_CURRENT_MSB_REG 0x0E | ||
42 | #define DS2780_CURRENT_LSB_REG 0x0F | ||
43 | #define DS2780_ACR_MSB_REG 0x10 | ||
44 | #define DS2780_ACR_LSB_REG 0x11 | ||
45 | #define DS2780_ACRL_MSB_REG 0x12 | ||
46 | #define DS2780_ACRL_LSB_REG 0x13 | ||
47 | #define DS2780_AS_REG 0x14 | ||
48 | #define DS2780_SFR_REG 0x15 | ||
49 | #define DS2780_FULL_MSB_REG 0x16 | ||
50 | #define DS2780_FULL_LSB_REG 0x17 | ||
51 | #define DS2780_AE_MSB_REG 0x18 | ||
52 | #define DS2780_AE_LSB_REG 0x19 | ||
53 | #define DS2780_SE_MSB_REG 0x1A | ||
54 | #define DS2780_SE_LSB_REG 0x1B | ||
55 | /* Register 0x1C - 0x1E Reserved */ | ||
56 | #define DS2780_EEPROM_REG 0x1F | ||
57 | #define DS2780_EEPROM_BLOCK0_START 0x20 | ||
58 | /* Register 0x20 - 0x2F User EEPROM */ | ||
59 | #define DS2780_EEPROM_BLOCK0_END 0x2F | ||
60 | /* Register 0x30 - 0x5F Reserved */ | ||
61 | #define DS2780_EEPROM_BLOCK1_START 0x60 | ||
62 | #define DS2780_CONTROL_REG 0x60 | ||
63 | #define DS2780_AB_REG 0x61 | ||
64 | #define DS2780_AC_MSB_REG 0x62 | ||
65 | #define DS2780_AC_LSB_REG 0x63 | ||
66 | #define DS2780_VCHG_REG 0x64 | ||
67 | #define DS2780_IMIN_REG 0x65 | ||
68 | #define DS2780_VAE_REG 0x66 | ||
69 | #define DS2780_IAE_REG 0x67 | ||
70 | #define DS2780_AE_40_REG 0x68 | ||
71 | #define DS2780_RSNSP_REG 0x69 | ||
72 | #define DS2780_FULL_40_MSB_REG 0x6A | ||
73 | #define DS2780_FULL_40_LSB_REG 0x6B | ||
74 | #define DS2780_FULL_3040_SLOPE_REG 0x6C | ||
75 | #define DS2780_FULL_2030_SLOPE_REG 0x6D | ||
76 | #define DS2780_FULL_1020_SLOPE_REG 0x6E | ||
77 | #define DS2780_FULL_0010_SLOPE_REG 0x6F | ||
78 | #define DS2780_AE_3040_SLOPE_REG 0x70 | ||
79 | #define DS2780_AE_2030_SLOPE_REG 0x71 | ||
80 | #define DS2780_AE_1020_SLOPE_REG 0x72 | ||
81 | #define DS2780_AE_0010_SLOPE_REG 0x73 | ||
82 | #define DS2780_SE_3040_SLOPE_REG 0x74 | ||
83 | #define DS2780_SE_2030_SLOPE_REG 0x75 | ||
84 | #define DS2780_SE_1020_SLOPE_REG 0x76 | ||
85 | #define DS2780_SE_0010_SLOPE_REG 0x77 | ||
86 | #define DS2780_RSGAIN_MSB_REG 0x78 | ||
87 | #define DS2780_RSGAIN_LSB_REG 0x79 | ||
88 | #define DS2780_RSTC_REG 0x7A | ||
89 | #define DS2780_FRSGAIN_MSB_REG 0x7B | ||
90 | #define DS2780_FRSGAIN_LSB_REG 0x7C | ||
91 | #define DS2780_EEPROM_BLOCK1_END 0x7C | ||
92 | /* Register 0x7D - 0xFF Reserved */ | ||
93 | |||
94 | /* Number of valid register addresses */ | ||
95 | #define DS2780_DATA_SIZE 0x80 | ||
96 | |||
97 | /* Status register bits */ | ||
98 | #define DS2780_STATUS_REG_CHGTF (1 << 7) | ||
99 | #define DS2780_STATUS_REG_AEF (1 << 6) | ||
100 | #define DS2780_STATUS_REG_SEF (1 << 5) | ||
101 | #define DS2780_STATUS_REG_LEARNF (1 << 4) | ||
102 | /* Bit 3 Reserved */ | ||
103 | #define DS2780_STATUS_REG_UVF (1 << 2) | ||
104 | #define DS2780_STATUS_REG_PORF (1 << 1) | ||
105 | /* Bit 0 Reserved */ | ||
106 | |||
107 | /* Control register bits */ | ||
108 | /* Bit 7 Reserved */ | ||
109 | #define DS2780_CONTROL_REG_UVEN (1 << 6) | ||
110 | #define DS2780_CONTROL_REG_PMOD (1 << 5) | ||
111 | #define DS2780_CONTROL_REG_RNAOP (1 << 4) | ||
112 | /* Bit 0 - 3 Reserved */ | ||
113 | |||
114 | /* Special feature register bits */ | ||
115 | /* Bit 1 - 7 Reserved */ | ||
116 | #define DS2780_SFR_REG_PIOSC (1 << 0) | ||
117 | |||
118 | /* EEPROM register bits */ | ||
119 | #define DS2780_EEPROM_REG_EEC (1 << 7) | ||
120 | #define DS2780_EEPROM_REG_LOCK (1 << 6) | ||
121 | /* Bit 2 - 6 Reserved */ | ||
122 | #define DS2780_EEPROM_REG_BL1 (1 << 1) | ||
123 | #define DS2780_EEPROM_REG_BL0 (1 << 0) | ||
124 | |||
125 | extern int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count, | ||
126 | int io); | ||
127 | extern int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd); | ||
128 | |||
129 | #endif /* !_W1_DS2780_H */ | ||
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h index 75137590c3bc..97479ae70b9c 100644 --- a/drivers/w1/w1_family.h +++ b/drivers/w1/w1_family.h | |||
@@ -37,6 +37,7 @@ | |||
37 | #define W1_FAMILY_DS2408 0x29 | 37 | #define W1_FAMILY_DS2408 0x29 |
38 | #define W1_EEPROM_DS2431 0x2D | 38 | #define W1_EEPROM_DS2431 0x2D |
39 | #define W1_FAMILY_DS2760 0x30 | 39 | #define W1_FAMILY_DS2760 0x30 |
40 | #define W1_FAMILY_DS2780 0x32 | ||
40 | 41 | ||
41 | #define MAXNAMELEN 32 | 42 | #define MAXNAMELEN 32 |
42 | 43 | ||