7 files changed, 98 insertions, 79 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index dff7bff8b8e0..121a865c7fbd 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -782,6 +782,59 @@ release:
 }
 
 /**
+ *  e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications
+ *  preventing further DMA write requests.  Workaround the issue by disabling
+ *  the de-assertion of the clock request when in 1Gpbs mode.
+ **/
+static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link)
+{
+        u32 fextnvm6 = er32(FEXTNVM6);
+        s32 ret_val = 0;
+
+        if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) {
+                u16 kmrn_reg;
+
+                ret_val = hw->phy.ops.acquire(hw);
+                if (ret_val)
+                        return ret_val;
+
+                ret_val =
+                    e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG,
+                                                &kmrn_reg);
+                if (ret_val)
+                        goto release;
+
+                ret_val =
+                    e1000e_write_kmrn_reg_locked(hw,
+                                                 E1000_KMRNCTRLSTA_K1_CONFIG,
+                                                 kmrn_reg &
+                                                 ~E1000_KMRNCTRLSTA_K1_ENABLE);
+                if (ret_val)
+                        goto release;
+
+                usleep_range(10, 20);
+
+                ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK);
+
+                ret_val =
+                    e1000e_write_kmrn_reg_locked(hw,
+                                                 E1000_KMRNCTRLSTA_K1_CONFIG,
+                                                 kmrn_reg);
+release:
+                hw->phy.ops.release(hw);
+        } else {
+                /* clear FEXTNVM6 bit 8 on link down or 10/100 */
+                ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+        }
+
+        return ret_val;
+}
+
+/**
  *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
  *  @hw: pointer to the HW structure
  *
@@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
                         return ret_val;
         }
 
+        /* Work-around I218 hang issue */
+        if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+            (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+                ret_val = e1000_k1_workaround_lpt_lp(hw, link);
+                if (ret_val)
+                        return ret_val;
+        }
+
         /* Clear link partner's EEE ability */
         hw->dev_spec.ich8lan.eee_lp_ability = 0;
 
@@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
         phy_ctrl = er32(PHY_CTRL);
         phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE;
+
         if (hw->phy.type == e1000_phy_i217) {
-                u16 phy_reg;
+                u16 phy_reg, device_id = hw->adapter->pdev->device;
+
+                if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) ||
+                    (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) {
+                        u32 fextnvm6 = er32(FEXTNVM6);
+
+                        ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK);
+                }
 
                 ret_val = hw->phy.ops.acquire(hw);
                 if (ret_val)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index b6d3174d7d2d..8bf4655c2e17 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -92,6 +92,8 @@
 #define E1000_FEXTNVM4_BEACON_DURATION_8USEC    0x7
 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC   0x3
 
+#define E1000_FEXTNVM6_REQ_PLL_CLK      0x00000100
+
 #define PCIE_ICH8_SNOOP_ALL     PCIE_NO_SNOOP_ALL
 
 #define E1000_ICH_RAR_ENTRIES   7
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 794fe1497666..a7e6a3e37257 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -42,6 +42,7 @@
 #define E1000_FEXTNVM   0x00028 /* Future Extended NVM - RW */
 #define E1000_FEXTNVM3  0x0003C /* Future Extended NVM 3 - RW */
 #define E1000_FEXTNVM4  0x00024 /* Future Extended NVM 4 - RW */
+#define E1000_FEXTNVM6  0x00010 /* Future Extended NVM 6 - RW */
 #define E1000_FEXTNVM7  0x000E4 /* Future Extended NVM 7 - RW */
 #define E1000_FCT       0x00030 /* Flow Control Type - RW */
 #define E1000_VET       0x00038 /* VLAN Ether Type - RW */
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 84e7e0909def..b64542acfa34 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
         switch (hw->phy.type) {
         case e1000_phy_i210:
         case e1000_phy_m88:
-                if (hw->phy.id == I347AT4_E_PHY_ID ||
-                    hw->phy.id == M88E1112_E_PHY_ID)
+                switch (hw->phy.id) {
+                case I347AT4_E_PHY_ID:
+                case M88E1112_E_PHY_ID:
+                case I210_I_PHY_ID:
                         ret_val = igb_copper_link_setup_m88_gen2(hw);
-                else
+                        break;
+                default:
                         ret_val = igb_copper_link_setup_m88(hw);
+                        break;
+                }
                 break;
         case e1000_phy_igp_3:
                 ret_val = igb_copper_link_setup_igp(hw);
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index d27edbc63923..25151401c2ab 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -447,7 +447,7 @@ struct igb_adapter {
 #endif
         struct i2c_algo_bit_data i2c_algo;
         struct i2c_adapter i2c_adap;
-        struct igb_i2c_client_list *i2c_clients;
+        struct i2c_client *i2c_client;
 };
 
 #define IGB_FLAG_HAS_MSI                (1 << 0)
diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c
index 0a9b073d0b03..4623502054d5 100644
--- a/drivers/net/ethernet/intel/igb/igb_hwmon.c
+++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c
@@ -39,6 +39,10 @@
 #include <linux/pci.h>
 
 #ifdef CONFIG_IGB_HWMON
+struct i2c_board_info i350_sensor_info = {
+        I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)),
+};
+
 /* hwmon callback functions */
 static ssize_t igb_hwmon_show_location(struct device *dev,
                                          struct device_attribute *attr,
@@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter)
         unsigned int i;
         int n_attrs;
         int rc = 0;
+        struct i2c_client *client = NULL;
 
         /* If this method isn't defined we don't support thermals */
         if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
@@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter)
                 if (rc)
                         goto exit;
 
+        /* init i2c_client */
+        client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info);
+        if (client == NULL) {
+                dev_info(&adapter->pdev->dev,
+                        "Failed to create new i2c device..\n");
+                goto exit;
+        }
+        adapter->i2c_client = client;
+
         /* Allocation space for max attributes
          * max num sensors * values (loc, temp, max, caution)
          */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ed79a1c53b59..4dbd62968c7a 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter)
         return;
 }
 
-static const struct i2c_board_info i350_sensor_info = {
-        I2C_BOARD_INFO("i350bb", 0Xf8),
-};
-
 /*  igb_init_i2c - Init I2C interface
  *  @adapter: pointer to adapter structure
  *
@@ -6227,13 +6223,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring,
         /* If we spanned a buffer we have a huge mess so test for it */
         BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP)));
 
-        /* Guarantee this function can be used by verifying buffer sizes */
-        BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD +
-                                                        NET_IP_ALIGN +
-                                                        IGB_TS_HDR_LEN +
-                                                        ETH_FRAME_LEN +
-                                                        ETH_FCS_LEN));
-
         rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean];
         page = rx_buffer->page;
         prefetchw(page);
@@ -7724,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
         }
 }
 
-static DEFINE_SPINLOCK(i2c_clients_lock);
-
-/*  igb_get_i2c_client - returns matching client
- *  in adapters's client list.
- *  @adapter: adapter struct
- *  @dev_addr: device address of i2c needed.
- */
-static struct i2c_client *
-igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
-{
-        ulong flags;
-        struct igb_i2c_client_list *client_list;
-        struct i2c_client *client = NULL;
-        struct i2c_board_info client_info = {
-                I2C_BOARD_INFO("igb", 0x00),
-        };
-
-        spin_lock_irqsave(&i2c_clients_lock, flags);
-        client_list = adapter->i2c_clients;
-
-        /* See if we already have an i2c_client */
-        while (client_list) {
-                if (client_list->client->addr == (dev_addr >> 1)) {
-                        client = client_list->client;
-                        goto exit;
-                } else {
-                        client_list = client_list->next;
-                }
-        }
-
-        /* no client_list found, create a new one */
-        client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC);
-        if (client_list == NULL)
-                goto exit;
-
-        /* dev_addr passed to us is left-shifted by 1 bit
-         * i2c_new_device call expects it to be flush to the right.
-         */
-        client_info.addr = dev_addr >> 1;
-        client_info.platform_data = adapter;
-        client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
-        if (client_list->client == NULL) {
-                dev_info(&adapter->pdev->dev,
-                        "Failed to create new i2c device..\n");
-                goto err_no_client;
-        }
-
-        /* insert new client at head of list */
-        client_list->next = adapter->i2c_clients;
-        adapter->i2c_clients = client_list;
-
-        client = client_list->client;
-        goto exit;
-
-err_no_client:
-        kfree(client_list);
-exit:
-        spin_unlock_irqrestore(&i2c_clients_lock, flags);
-        return client;
-}
-
 /*  igb_read_i2c_byte - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
@@ -7798,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
                                 u8 dev_addr, u8 *data)
 {
         struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
-        struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+        struct i2c_client *this_client = adapter->i2c_client;
         s32 status;
         u16 swfw_mask = 0;
 
@@ -7835,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
                                  u8 dev_addr, u8 data)
 {
         struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
-        struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+        struct i2c_client *this_client = adapter->i2c_client;
         s32 status;
         u16 swfw_mask = E1000_SWFW_PHY0_SM;