Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 92 insertions, 0 deletions

diff --git a/sound/oss/waveartist.h b/sound/oss/waveartist.h
new file mode 100644
index 000000000000..2033fb87b247
--- /dev/null
+++ b/sound/oss/waveartist.h
@@ -0,0 +1,92 @@
+/*
+ * linux/drivers/sound/waveartist.h
+ *
+ * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder
+ */
+
+//registers
+#define CMDR    0
+#define DATR    2
+#define CTLR    4
+#define STATR   5
+#define IRQSTAT 12
+
+//bit defs
+//reg STATR
+#define CMD_WE  0x80
+#define CMD_RF  0x40
+#define DAT_WE  0x20
+#define DAT_RF  0x10
+
+#define IRQ_REQ 0x08
+#define DMA1    0x04
+#define DMA0    0x02
+
+//bit defs
+//reg CTLR
+#define CMD_WEIE        0x80
+#define CMD_RFIE        0x40
+#define DAT_WEIE        0x20
+#define DAT_RFIE        0x10
+
+#define RESET   0x08
+#define DMA1_IE 0x04
+#define DMA0_IE 0x02
+#define IRQ_ACK 0x01
+
+//commands
+
+#define WACMD_SYSTEMID          0x00
+#define WACMD_GETREV            0x00
+#define WACMD_INPUTFORMAT       0x10    //0-8S, 1-16S, 2-8U
+#define WACMD_INPUTCHANNELS     0x11    //1-Mono, 2-Stereo
+#define WACMD_INPUTSPEED        0x12    //sampling rate
+#define WACMD_INPUTDMA          0x13    //0-8bit, 1-16bit, 2-PIO
+#define WACMD_INPUTSIZE         0x14    //samples to interrupt
+#define WACMD_INPUTSTART        0x15    //start ADC
+#define WACMD_INPUTPAUSE        0x16    //pause ADC
+#define WACMD_INPUTSTOP         0x17    //stop ADC
+#define WACMD_INPUTRESUME       0x18    //resume ADC
+#define WACMD_INPUTPIO          0x19    //PIO ADC
+
+#define WACMD_OUTPUTFORMAT      0x20    //0-8S, 1-16S, 2-8U
+#define WACMD_OUTPUTCHANNELS    0x21    //1-Mono, 2-Stereo
+#define WACMD_OUTPUTSPEED       0x22    //sampling rate
+#define WACMD_OUTPUTDMA         0x23    //0-8bit, 1-16bit, 2-PIO
+#define WACMD_OUTPUTSIZE        0x24    //samples to interrupt
+#define WACMD_OUTPUTSTART       0x25    //start ADC
+#define WACMD_OUTPUTPAUSE       0x26    //pause ADC
+#define WACMD_OUTPUTSTOP        0x27    //stop ADC
+#define WACMD_OUTPUTRESUME      0x28    //resume ADC
+#define WACMD_OUTPUTPIO         0x29    //PIO ADC
+
+#define WACMD_GET_LEVEL         0x30
+#define WACMD_SET_LEVEL         0x31
+#define WACMD_SET_MIXER         0x32
+#define WACMD_RST_MIXER         0x33
+#define WACMD_SET_MONO          0x34
+
+/*
+ * Definitions for left/right recording input mux
+ */
+#define ADC_MUX_NONE    0
+#define ADC_MUX_MIXER   1
+#define ADC_MUX_LINE    2
+#define ADC_MUX_AUX2    3
+#define ADC_MUX_AUX1    4
+#define ADC_MUX_MIC     5
+
+/*
+ * Definitions for mixer gain settings
+ */
+#define MIX_GAIN_LINE   0       /* line in       */
+#define MIX_GAIN_AUX1   1       /* aux1          */
+#define MIX_GAIN_AUX2   2       /* aux2          */
+#define MIX_GAIN_XMIC   3       /* crossover mic */
+#define MIX_GAIN_MIC    4       /* normal mic    */
+#define MIX_GAIN_PREMIC 5       /* preamp mic    */
+#define MIX_GAIN_OUT    6       /* output        */
+#define MIX_GAIN_MONO   7       /* mono in       */
+
+int wa_sendcmd(unsigned int cmd);
+int wa_writecmd(unsigned int cmd, unsigned int arg);