Merge branch 'nomadik' into devel

1 files changed, 266 insertions, 0 deletions

diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h
new file mode 100644
index 000000000000..f73b2f0c55b7
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-nomadik.h
@@ -0,0 +1,266 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
+
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *      bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *      bit  9..10 - Alternate Function Selection
+ *      bit 11..12 - Pull up/down state
+ *      bit     13 - Sleep mode behaviour
+ *      bit     14 - Direction
+ *      bit     15 - Value (if output)
+ *      bit 16..18 - SLPM pull up/down state
+ *      bit 19..20 - SLPM direction
+ *      bit 21..22 - SLPM Value (if output)
+ *      bit 23..25 - PDIS value (if input)
+ *      bit     26 - Gpio mode
+ *      bit     27 - Sleep mode
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *                   pull up/down = disabled
+ *                   sleep mode = input/wakeup
+ *                   direction = input
+ *                   value = low
+ *                   SLPM direction = same as normal
+ *                   SLPM pull = same as normal
+ *                   SLPM value = same as normal
+ *
+ * PIN_CFG         - default config with alternate function
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK            0x1ff
+#define PIN_NUM(x)              ((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT           9
+#define PIN_ALT_MASK            (0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)              (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO                (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A               (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B               (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C               (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT          11
+#define PIN_PULL_MASK           (0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)             (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE           (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP             (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN           (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT          13
+#define PIN_SLPM_MASK           (0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)             (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT     (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE       (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE  (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
+
+#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
+#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
+
+#define PIN_DIR_SHIFT           14
+#define PIN_DIR_MASK            (0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x)              (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT           (0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT          (1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT           15
+#define PIN_VAL_MASK            (0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x)              (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW             (0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH            (1 << PIN_VAL_SHIFT)
+
+#define PIN_SLPM_PULL_SHIFT     16
+#define PIN_SLPM_PULL_MASK      (0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x)        \
+        (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE      \
+        ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP        \
+        ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN      \
+        ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT      19
+#define PIN_SLPM_DIR_MASK       (0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x)         \
+        (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT      ((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT     ((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT      21
+#define PIN_SLPM_VAL_MASK       (0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x)         \
+        (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW        ((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH       ((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+#define PIN_SLPM_PDIS_SHIFT             23
+#define PIN_SLPM_PDIS_MASK              (0x3 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS(x)        \
+        (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_NO_CHANGE         (0 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_DISABLED          (1 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_ENABLED           (2 << PIN_SLPM_PDIS_SHIFT)
+
+#define PIN_LOWEMI_SHIFT        25
+#define PIN_LOWEMI_MASK         (0x1 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI(x)           (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_DISABLED     (0 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_ENABLED      (1 << PIN_LOWEMI_SHIFT)
+
+#define PIN_GPIOMODE_SHIFT      26
+#define PIN_GPIOMODE_MASK       (0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)         (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED   (0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED    (1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT     27
+#define PIN_SLEEPMODE_MASK      (0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)        (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED  (0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED   (1 << PIN_SLEEPMODE_SHIFT)
+
+
+/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
+#define PIN_INPUT_PULLDOWN      (PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP        (PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL        (PIN_DIR_INPUT | PIN_PULL_NONE)
+#define PIN_OUTPUT_LOW          (PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH         (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP   (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL   (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW     (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH    (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
+
+#define PIN_CFG_DEFAULT         (0)
+
+#define PIN_CFG(num, alt)               \
+        (PIN_CFG_DEFAULT |\
+         (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_INPUT(num, alt, pull)           \
+        (PIN_CFG_DEFAULT |\
+         (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val)           \
+        (PIN_CFG_DEFAULT |\
+         (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT    0x00
+#define NMK_GPIO_DATS   0x04
+#define NMK_GPIO_DATC   0x08
+#define NMK_GPIO_PDIS   0x0c
+#define NMK_GPIO_DIR    0x10
+#define NMK_GPIO_DIRS   0x14
+#define NMK_GPIO_DIRC   0x18
+#define NMK_GPIO_SLPC   0x1c
+#define NMK_GPIO_AFSLA  0x20
+#define NMK_GPIO_AFSLB  0x24
+#define NMK_GPIO_LOWEMI 0x28
+
+#define NMK_GPIO_RIMSC  0x40
+#define NMK_GPIO_FIMSC  0x44
+#define NMK_GPIO_IS     0x48
+#define NMK_GPIO_IC     0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS    0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL  0x60
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO       0
+#define NMK_GPIO_ALT_A  1
+#define NMK_GPIO_ALT_B  2
+#define NMK_GPIO_ALT_C  (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+        NMK_GPIO_PULL_NONE,
+        NMK_GPIO_PULL_UP,
+        NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+        NMK_GPIO_SLPM_INPUT,
+        NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+        NMK_GPIO_SLPM_NOCHANGE,
+        NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+/* Older deprecated pin config API that should go away soon */
+extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
+extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
+#ifdef CONFIG_PINCTRL_NOMADIK
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+#else
+static inline int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+        return -ENODEV;
+}
+#endif
+extern int nmk_gpio_get_mode(int gpio);
+
+extern void nmk_gpio_wakeups_suspend(void);
+extern void nmk_gpio_wakeups_resume(void);
+
+extern void nmk_gpio_clocks_enable(void);
+extern void nmk_gpio_clocks_disable(void);
+
+extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+        char *name;
+        int first_gpio;
+        int first_irq;
+        int num_gpio;
+        u32 (*get_secondary_status)(unsigned int bank);
+        void (*set_ioforce)(bool enable);
+        bool supports_sleepmode;
+};
+
+#endif /* __PLAT_NOMADIK_GPIO */