Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...

50 files changed, 2465 insertions, 220 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index ccfa259fa848..6ee53c7a57a1 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -43,6 +43,8 @@ obj-y				+= macintosh/
 obj-$(CONFIG_IDE)               += ide/
 obj-$(CONFIG_SCSI)              += scsi/
 obj-$(CONFIG_ATA)               += ata/
+obj-$(CONFIG_MTD)               += mtd/
+obj-$(CONFIG_SPI)               += spi/
 obj-y                           += net/
 obj-$(CONFIG_ATM)               += atm/
 obj-$(CONFIG_FUSION)            += message/
@@ -51,8 +53,6 @@ obj-y				+= ieee1394/
 obj-$(CONFIG_UIO)               += uio/
 obj-y                           += cdrom/
 obj-y                           += auxdisplay/
-obj-$(CONFIG_MTD)               += mtd/
-obj-$(CONFIG_SPI)               += spi/
 obj-$(CONFIG_PCCARD)            += pcmcia/
 obj-$(CONFIG_DIO)               += dio/
 obj-$(CONFIG_SBUS)              += sbus/
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index b8e35a0b4d72..e4ec3659759a 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -25,6 +25,14 @@ config MTD_DEBUG_VERBOSE
         help
           Determines the verbosity level of the MTD debugging messages.
 
+config MTD_TESTS
+        tristate "MTD tests support"
+        depends on m
+        help
+          This option includes various MTD tests into compilation. The tests
+          should normally be compiled as kernel modules. The modules perform
+          various checks and verifications when loaded.
+
 config MTD_CONCAT
         tristate "MTD concatenating support"
         help
@@ -45,14 +53,6 @@ config MTD_PARTITIONS
           devices. Partitioning on NFTL 'devices' is a different - that's the
           'normal' form of partitioning used on a block device.
 
-config MTD_TESTS
-        tristate "MTD tests support"
-        depends on m
-        help
-          This option includes various MTD tests into compilation. The tests
-          should normally be compiled as kernel modules. The modules perform
-          various checks and verifications when loaded.
-
 config MTD_REDBOOT_PARTS
         tristate "RedBoot partition table parsing"
         depends on MTD_PARTITIONS
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index d072ca5be689..cec7ab98b2a9 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -239,7 +239,7 @@ static int parse_afs_partitions(struct mtd_info *mtd,
                 parts[idx].offset       = img_ptr;
                 parts[idx].mask_flags   = 0;
 
-                printk("  mtd%d: at 0x%08x, %5dKB, %8u, %s\n",
+                printk("  mtd%d: at 0x%08x, %5lluKiB, %8u, %s\n",
                         idx, img_ptr, parts[idx].size / 1024,
                         iis.imageNumber, str);
 
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 61ea833e0908..94bb61e19047 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -282,16 +282,6 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param)
         }
 }
 
-static void fixup_M29W128G_write_buffer(struct mtd_info *mtd, void *param)
-{
-        struct map_info *map = mtd->priv;
-        struct cfi_private *cfi = map->fldrv_priv;
-        if (cfi->cfiq->BufWriteTimeoutTyp) {
-                pr_warning("Don't use write buffer on ST flash M29W128G\n");
-                cfi->cfiq->BufWriteTimeoutTyp = 0;
-        }
-}
-
 static struct cfi_fixup cfi_fixup_table[] = {
         { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef AMD_BOOTLOC_BUG
@@ -308,7 +298,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
         { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, },
         { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, },
         { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, },
-        { CFI_MFR_ST,  0x227E, fixup_M29W128G_write_buffer, NULL, },
 #if !FORCE_WORD_WRITE
         { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
 #endif
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 34d40e25d312..c5a84fda5410 100644..100755
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
 {
         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
         cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+        /* M29W128G flashes require an additional reset command
+           when exit qry mode */
+        if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
+                cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
 }
 EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
 
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index ccc4cfc7e4b5..736a3be265f2 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -111,6 +111,11 @@
 #define I28F320B3B      0x8897
 #define I28F640B3T      0x8898
 #define I28F640B3B      0x8899
+#define I28F640C3B      0x88CD
+#define I28F160F3T      0x88F3
+#define I28F160F3B      0x88F4
+#define I28F160C3T      0x88C2
+#define I28F160C3B      0x88C3
 #define I82802AB        0x00ad
 #define I82802AC        0x00ac
 
@@ -150,6 +155,7 @@
 #define M50LPW080       0x002F
 #define M50FLW080A      0x0080
 #define M50FLW080B      0x0081
+#define PSD4256G6V      0x00e9
 
 /* SST */
 #define SST29EE020      0x0010
@@ -201,6 +207,7 @@ enum uaddr {
         MTD_UADDR_0x0555_0x02AA,
         MTD_UADDR_0x0555_0x0AAA,
         MTD_UADDR_0x5555_0x2AAA,
+        MTD_UADDR_0x0AAA_0x0554,
         MTD_UADDR_0x0AAA_0x0555,
         MTD_UADDR_0xAAAA_0x5555,
         MTD_UADDR_DONT_CARE,            /* Requires an arbitrary address */
@@ -245,6 +252,11 @@ static const struct unlock_addr  unlock_addrs[] = {
                 .addr2 = 0x2aaa
         },
 
+        [MTD_UADDR_0x0AAA_0x0554] = {
+                .addr1 = 0x0AAA,
+                .addr2 = 0x0554
+        },
+
         [MTD_UADDR_0x0AAA_0x0555] = {
                 .addr1 = 0x0AAA,
                 .addr2 = 0x0555
@@ -1103,6 +1115,19 @@ static const struct amd_flash_info jedec_table[] = {
                 }
         }, {
                 .mfr_id         = MANUFACTURER_INTEL,
+                .dev_id         = I28F640C3B,
+                .name           = "Intel 28F640C3B",
+                .devtypes       = CFI_DEVICETYPE_X16,
+                .uaddr          = MTD_UADDR_UNNECESSARY,
+                .dev_size       = SIZE_8MiB,
+                .cmd_set        = P_ID_INTEL_STD,
+                .nr_regions     = 2,
+                .regions        = {
+                        ERASEINFO(0x02000, 8),
+                        ERASEINFO(0x10000, 127),
+                }
+        }, {
+                .mfr_id         = MANUFACTURER_INTEL,
                 .dev_id         = I82802AB,
                 .name           = "Intel 82802AB",
                 .devtypes       = CFI_DEVICETYPE_X8,
@@ -1156,8 +1181,8 @@ static const struct amd_flash_info jedec_table[] = {
                 .mfr_id         = MANUFACTURER_NEC,
                 .dev_id         = UPD29F064115,
                 .name           = "NEC uPD29F064115",
-                .devtypes       = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-                .uaddr          = MTD_UADDR_0x0555_0x02AA,      /* ???? */
+                .devtypes       = CFI_DEVICETYPE_X16,
+                .uaddr          = MTD_UADDR_0xAAAA_0x5555,
                 .dev_size       = SIZE_8MiB,
                 .cmd_set        = P_ID_AMD_STD,
                 .nr_regions     = 3,
@@ -1726,6 +1751,18 @@ static const struct amd_flash_info jedec_table[] = {
                         ERASEINFO(0x1000,16),
                 }
         }, {
+                .mfr_id         = 0xff00 | MANUFACTURER_ST,
+                .dev_id         = 0xff00 | PSD4256G6V,
+                .name           = "ST PSD4256G6V",
+                .devtypes       = CFI_DEVICETYPE_X16,
+                .uaddr          = MTD_UADDR_0x0AAA_0x0554,
+                .dev_size       = SIZE_1MiB,
+                .cmd_set        = P_ID_AMD_STD,
+                .nr_regions     = 1,
+                .regions        = {
+                        ERASEINFO(0x10000,16),
+                }
+        }, {
                 .mfr_id         = MANUFACTURER_TOSHIBA,
                 .dev_id         = TC58FVT160,
                 .name           = "Toshiba TC58FVT160",
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 325fab92a62c..c222514bb70d 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ
         help
           This option enables FAST_READ access supported by ST M25Pxx.
 
+config MTD_SST25L
+        tristate "Support SST25L (non JEDEC) SPI Flash chips"
+        depends on SPI_MASTER
+        help
+          This enables access to the non JEDEC SST25L SPI flash chips, used
+          for program and data storage.
+
+          Set up your spi devices with the right board-specific platform data,
+          if you want to specify device partitioning.
+
 config MTD_SLRAM
         tristate "Uncached system RAM"
         help
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0993d5cf3923..ab5c9b92ac82 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)     += block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)     += mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)        += m25p80.o
+obj-$(CONFIG_MTD_SST25L)        += sst25l.o
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 578de1c67bfe..f4359fe7150f 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -393,7 +393,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
         * erase range is aligned with the erase size which is in
         * effect here.
         */
-   if (instr->addr & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+   if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1)))
+      return -EINVAL;
 
    /* Remember the erase region we start on */
    first = i;
@@ -409,7 +410,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
    i--;
 
    /* is the end aligned on a block boundary? */
-   if ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+   if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)))
+      return -EINVAL;
 
    addr = instr->addr;
    len = instr->len;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index eb495d83064f..379c316f329e 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -44,6 +44,11 @@
 #define OPCODE_SE               0xd8    /* Sector erase (usually 64KiB) */
 #define OPCODE_RDID             0x9f    /* Read JEDEC ID */
 
+/* Used for SST flashes only. */
+#define OPCODE_BP               0x02    /* Byte program */
+#define OPCODE_WRDI             0x04    /* Write disable */
+#define OPCODE_AAI_WP           0xad    /* Auto address increment word program */
+
 /* Status Register bits. */
 #define SR_WIP                  1       /* Write in progress */
 #define SR_WEL                  2       /* Write enable latch */
@@ -132,6 +137,15 @@ static inline int write_enable(struct m25p *flash)
         return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
 }
 
+/*
+ * Send write disble instruction to the chip.
+ */
+static inline int write_disable(struct m25p *flash)
+{
+        u8      code = OPCODE_WRDI;
+
+        return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
+}
 
 /*
  * Service routine to read status register until ready, or timeout occurs.
@@ -454,6 +468,111 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
         return 0;
 }
 
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+                size_t *retlen, const u_char *buf)
+{
+        struct m25p *flash = mtd_to_m25p(mtd);
+        struct spi_transfer t[2];
+        struct spi_message m;
+        size_t actual;
+        int cmd_sz, ret;
+
+        if (retlen)
+                *retlen = 0;
+
+        /* sanity checks */
+        if (!len)
+                return 0;
+
+        if (to + len > flash->mtd.size)
+                return -EINVAL;
+
+        spi_message_init(&m);
+        memset(t, 0, (sizeof t));
+
+        t[0].tx_buf = flash->command;
+        t[0].len = CMD_SIZE;
+        spi_message_add_tail(&t[0], &m);
+
+        t[1].tx_buf = buf;
+        spi_message_add_tail(&t[1], &m);
+
+        mutex_lock(&flash->lock);
+
+        /* Wait until finished previous write command. */
+        ret = wait_till_ready(flash);
+        if (ret)
+                goto time_out;
+
+        write_enable(flash);
+
+        actual = to % 2;
+        /* Start write from odd address. */
+        if (actual) {
+                flash->command[0] = OPCODE_BP;
+                flash->command[1] = to >> 16;
+                flash->command[2] = to >> 8;
+                flash->command[3] = to;
+
+                /* write one byte. */
+                t[1].len = 1;
+                spi_sync(flash->spi, &m);
+                ret = wait_till_ready(flash);
+                if (ret)
+                        goto time_out;
+                *retlen += m.actual_length - CMD_SIZE;
+        }
+        to += actual;
+
+        flash->command[0] = OPCODE_AAI_WP;
+        flash->command[1] = to >> 16;
+        flash->command[2] = to >> 8;
+        flash->command[3] = to;
+
+        /* Write out most of the data here. */
+        cmd_sz = CMD_SIZE;
+        for (; actual < len - 1; actual += 2) {
+                t[0].len = cmd_sz;
+                /* write two bytes. */
+                t[1].len = 2;
+                t[1].tx_buf = buf + actual;
+
+                spi_sync(flash->spi, &m);
+                ret = wait_till_ready(flash);
+                if (ret)
+                        goto time_out;
+                *retlen += m.actual_length - cmd_sz;
+                cmd_sz = 1;
+                to += 2;
+        }
+        write_disable(flash);
+        ret = wait_till_ready(flash);
+        if (ret)
+                goto time_out;
+
+        /* Write out trailing byte if it exists. */
+        if (actual != len) {
+                write_enable(flash);
+                flash->command[0] = OPCODE_BP;
+                flash->command[1] = to >> 16;
+                flash->command[2] = to >> 8;
+                flash->command[3] = to;
+                t[0].len = CMD_SIZE;
+                t[1].len = 1;
+                t[1].tx_buf = buf + actual;
+
+                spi_sync(flash->spi, &m);
+                ret = wait_till_ready(flash);
+                if (ret)
+                        goto time_out;
+                *retlen += m.actual_length - CMD_SIZE;
+                write_disable(flash);
+        }
+
+time_out:
+        mutex_unlock(&flash->lock);
+        return ret;
+}
 
 /****************************************************************************/
 
@@ -501,7 +620,10 @@ static struct flash_info __devinitdata m25p_data [] = {
         { "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
 
         /* Macronix */
+        { "mx25l3205d", 0xc22016, 0, 64 * 1024, 64, },
+        { "mx25l6405d", 0xc22017, 0, 64 * 1024, 128, },
         { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+        { "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, },
 
         /* Spansion -- single (large) sector size only, at least
          * for the chips listed here (without boot sectors).
@@ -511,14 +633,20 @@ static struct flash_info __devinitdata m25p_data [] = {
         { "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
         { "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
         { "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
-        { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
+        { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
         { "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
+        { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, },
+        { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, },
 
         /* SST -- large erase sizes are "overlays", "sectors" are 4K */
         { "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
         { "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
         { "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
         { "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
+        { "sst25wf512",  0xbf2501, 0, 64 * 1024, 1, SECT_4K, },
+        { "sst25wf010",  0xbf2502, 0, 64 * 1024, 2, SECT_4K, },
+        { "sst25wf020",  0xbf2503, 0, 64 * 1024, 4, SECT_4K, },
+        { "sst25wf040",  0xbf2504, 0, 64 * 1024, 8, SECT_4K, },
 
         /* ST Microelectronics -- newer production may have feature updates */
         { "m25p05",  0x202010,  0, 32 * 1024, 2, },
@@ -667,7 +795,12 @@ static int __devinit m25p_probe(struct spi_device *spi)
         flash->mtd.size = info->sector_size * info->n_sectors;
         flash->mtd.erase = m25p80_erase;
         flash->mtd.read = m25p80_read;
-        flash->mtd.write = m25p80_write;
+
+        /* sst flash chips use AAI word program */
+        if (info->jedec_id >> 16 == 0xbf)
+                flash->mtd.write = sst_write;
+        else
+                flash->mtd.write = m25p80_write;
 
         /* prefer "small sector" erase if possible */
         if (info->flags & SECT_4K) {
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 211c27acd01e..93e3627be74c 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -401,7 +401,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
                 (void) dataflash_waitready(priv->spi);
 
 
-#ifdef CONFIG_MTD_DATAFLASH_VERIFY_WRITE
+#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY
 
                 /* (3) Compare to Buffer1 */
                 addr = pageaddr << priv->page_offset;
@@ -430,7 +430,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
                 } else
                         status = 0;
 
-#endif  /* CONFIG_MTD_DATAFLASH_VERIFY_WRITE */
+#endif  /* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */
 
                 remaining = remaining - writelen;
                 pageaddr++;
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 088fbb7595b5..1696bbecaa7e 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -14,6 +14,9 @@
  * Example:
  *      phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
  */
+
+#define pr_fmt(fmt) "phram: " fmt
+
 #include <asm/io.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -23,8 +26,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 
-#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args)
-
 struct phram_mtd_list {
         struct mtd_info mtd;
         struct list_head list;
@@ -132,7 +133,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
         ret = -EIO;
         new->mtd.priv = ioremap(start, len);
         if (!new->mtd.priv) {
-                ERROR("ioremap failed\n");
+                pr_err("ioremap failed\n");
                 goto out1;
         }
 
@@ -152,7 +153,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
 
         ret = -EAGAIN;
         if (add_mtd_device(&new->mtd)) {
-                ERROR("Failed to register new device\n");
+                pr_err("Failed to register new device\n");
                 goto out2;
         }
 
@@ -227,8 +228,8 @@ static inline void kill_final_newline(char *str)
 
 
 #define parse_err(fmt, args...) do {    \
-        ERROR(fmt , ## args);   \
-        return 0;               \
+        pr_err(fmt , ## args);  \
+        return 1;               \
 } while (0)
 
 static int phram_setup(const char *val, struct kernel_param *kp)
@@ -256,12 +257,8 @@ static int phram_setup(const char *val, struct kernel_param *kp)
                 parse_err("not enough arguments\n");
 
         ret = parse_name(&name, token[0]);
-        if (ret == -ENOMEM)
-                parse_err("out of memory\n");
-        if (ret == -ENOSPC)
-                parse_err("name too long\n");
         if (ret)
-                return 0;
+                return ret;
 
         ret = parse_num32(&start, token[1]);
         if (ret) {
@@ -275,9 +272,11 @@ static int phram_setup(const char *val, struct kernel_param *kp)
                 parse_err("illegal device length\n");
         }
 
-        register_device(name, start, len);
+        ret = register_device(name, start, len);
+        if (!ret)
+                pr_info("%s device: %#x at %#x\n", name, len, start);
 
-        return 0;
+        return ret;
 }
 
 module_param_call(phram, phram_setup, NULL, NULL, 000);
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 7d846e9173da..3aa05cd18ea1 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -341,7 +341,7 @@ static int __init init_slram(void)
 #else
         int count;
 
-        for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS);
+        for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count];
                         count++) {
         }
 
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
new file mode 100644
index 000000000000..c2baf3353f84
--- /dev/null
+++ b/drivers/mtd/devices/sst25l.c
@@ -0,0 +1,512 @@
+/*
+ * sst25l.c
+ *
+ * Driver for SST25L SPI Flash chips
+ *
+ * Copyright © 2009 Bluewater Systems Ltd
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+/* Erases can take up to 3 seconds! */
+#define MAX_READY_WAIT_JIFFIES  msecs_to_jiffies(3000)
+
+#define SST25L_CMD_WRSR         0x01    /* Write status register */
+#define SST25L_CMD_WRDI         0x04    /* Write disable */
+#define SST25L_CMD_RDSR         0x05    /* Read status register */
+#define SST25L_CMD_WREN         0x06    /* Write enable */
+#define SST25L_CMD_READ         0x03    /* High speed read */
+
+#define SST25L_CMD_EWSR         0x50    /* Enable write status register */
+#define SST25L_CMD_SECTOR_ERASE 0x20    /* Erase sector */
+#define SST25L_CMD_READ_ID      0x90    /* Read device ID */
+#define SST25L_CMD_AAI_PROGRAM  0xaf    /* Auto address increment */
+
+#define SST25L_STATUS_BUSY      (1 << 0)        /* Chip is busy */
+#define SST25L_STATUS_WREN      (1 << 1)        /* Write enabled */
+#define SST25L_STATUS_BP0       (1 << 2)        /* Block protection 0 */
+#define SST25L_STATUS_BP1       (1 << 3)        /* Block protection 1 */
+
+struct sst25l_flash {
+        struct spi_device       *spi;
+        struct mutex            lock;
+        struct mtd_info         mtd;
+
+        int                     partitioned;
+};
+
+struct flash_info {
+        const char              *name;
+        uint16_t                device_id;
+        unsigned                page_size;
+        unsigned                nr_pages;
+        unsigned                erase_size;
+};
+
+#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
+
+static struct flash_info __initdata sst25l_flash_info[] = {
+        {"sst25lf020a", 0xbf43, 256, 1024, 4096},
+        {"sst25lf040a", 0xbf44, 256, 2048, 4096},
+};
+
+static int sst25l_status(struct sst25l_flash *flash, int *status)
+{
+        unsigned char command, response;
+        int err;
+
+        command = SST25L_CMD_RDSR;
+        err = spi_write_then_read(flash->spi, &command, 1, &response, 1);
+        if (err < 0)
+                return err;
+
+        *status = response;
+        return 0;
+}
+
+static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
+{
+        unsigned char command[2];
+        int status, err;
+
+        command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
+        err = spi_write(flash->spi, command, 1);
+        if (err)
+                return err;
+
+        command[0] = SST25L_CMD_EWSR;
+        err = spi_write(flash->spi, command, 1);
+        if (err)
+                return err;
+
+        command[0] = SST25L_CMD_WRSR;
+        command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
+        err = spi_write(flash->spi, command, 2);
+        if (err)
+                return err;
+
+        if (enable) {
+                err = sst25l_status(flash, &status);
+                if (err)
+                        return err;
+                if (!(status & SST25L_STATUS_WREN))
+                        return -EROFS;
+        }
+
+        return 0;
+}
+
+static int sst25l_wait_till_ready(struct sst25l_flash *flash)
+{
+        unsigned long deadline;
+        int status, err;
+
+        deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+        do {
+                err = sst25l_status(flash, &status);
+                if (err)
+                        return err;
+                if (!(status & SST25L_STATUS_BUSY))
+                        return 0;
+
+                cond_resched();
+        } while (!time_after_eq(jiffies, deadline));
+
+        return -ETIMEDOUT;
+}
+
+static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
+{
+        unsigned char command[4];
+        int err;
+
+        err = sst25l_write_enable(flash, 1);
+        if (err)
+                return err;
+
+        command[0] = SST25L_CMD_SECTOR_ERASE;
+        command[1] = offset >> 16;
+        command[2] = offset >> 8;
+        command[3] = offset;
+        err = spi_write(flash->spi, command, 4);
+        if (err)
+                return err;
+
+        err = sst25l_wait_till_ready(flash);
+        if (err)
+                return err;
+
+        return sst25l_write_enable(flash, 0);
+}
+
+static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+        struct sst25l_flash *flash = to_sst25l_flash(mtd);
+        uint32_t addr, end;
+        int err;
+
+        /* Sanity checks */
+        if (instr->addr + instr->len > flash->mtd.size)
+                return -EINVAL;
+
+        if ((uint32_t)instr->len % mtd->erasesize)
+                return -EINVAL;
+
+        if ((uint32_t)instr->addr % mtd->erasesize)
+                return -EINVAL;
+
+        addr = instr->addr;
+        end = addr + instr->len;
+
+        mutex_lock(&flash->lock);
+
+        err = sst25l_wait_till_ready(flash);
+        if (err) {
+                mutex_unlock(&flash->lock);
+                return err;
+        }
+
+        while (addr < end) {
+                err = sst25l_erase_sector(flash, addr);
+                if (err) {
+                        mutex_unlock(&flash->lock);
+                        instr->state = MTD_ERASE_FAILED;
+                        dev_err(&flash->spi->dev, "Erase failed\n");
+                        return err;
+                }
+
+                addr += mtd->erasesize;
+        }
+
+        mutex_unlock(&flash->lock);
+
+        instr->state = MTD_ERASE_DONE;
+        mtd_erase_callback(instr);
+        return 0;
+}
+
+static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
+                       size_t *retlen, unsigned char *buf)
+{
+        struct sst25l_flash *flash = to_sst25l_flash(mtd);
+        struct spi_transfer transfer[2];
+        struct spi_message message;
+        unsigned char command[4];
+        int ret;
+
+        /* Sanity checking */
+        if (len == 0)
+                return 0;
+
+        if (from + len > flash->mtd.size)
+                return -EINVAL;
+
+        if (retlen)
+                *retlen = 0;
+
+        spi_message_init(&message);
+        memset(&transfer, 0, sizeof(transfer));
+
+        command[0] = SST25L_CMD_READ;
+        command[1] = from >> 16;
+        command[2] = from >> 8;
+        command[3] = from;
+
+        transfer[0].tx_buf = command;
+        transfer[0].len = sizeof(command);
+        spi_message_add_tail(&transfer[0], &message);
+
+        transfer[1].rx_buf = buf;
+        transfer[1].len = len;
+        spi_message_add_tail(&transfer[1], &message);
+
+        mutex_lock(&flash->lock);
+
+        /* Wait for previous write/erase to complete */
+        ret = sst25l_wait_till_ready(flash);
+        if (ret) {
+                mutex_unlock(&flash->lock);
+                return ret;
+        }
+
+        spi_sync(flash->spi, &message);
+
+        if (retlen && message.actual_length > sizeof(command))
+                *retlen += message.actual_length - sizeof(command);
+
+        mutex_unlock(&flash->lock);
+        return 0;
+}
+
+static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
+                        size_t *retlen, const unsigned char *buf)
+{
+        struct sst25l_flash *flash = to_sst25l_flash(mtd);
+        int i, j, ret, bytes, copied = 0;
+        unsigned char command[5];
+
+        /* Sanity checks */
+        if (!len)
+                return 0;
+
+        if (to + len > flash->mtd.size)
+                return -EINVAL;
+
+        if ((uint32_t)to % mtd->writesize)
+                return -EINVAL;
+
+        mutex_lock(&flash->lock);
+
+        ret = sst25l_write_enable(flash, 1);
+        if (ret)
+                goto out;
+
+        for (i = 0; i < len; i += mtd->writesize) {
+                ret = sst25l_wait_till_ready(flash);
+                if (ret)
+                        goto out;
+
+                /* Write the first byte of the page */
+                command[0] = SST25L_CMD_AAI_PROGRAM;
+                command[1] = (to + i) >> 16;
+                command[2] = (to + i) >> 8;
+                command[3] = (to + i);
+                command[4] = buf[i];
+                ret = spi_write(flash->spi, command, 5);
+                if (ret < 0)
+                        goto out;
+                copied++;
+
+                /*
+                 * Write the remaining bytes using auto address
+                 * increment mode
+                 */
+                bytes = min_t(uint32_t, mtd->writesize, len - i);
+                for (j = 1; j < bytes; j++, copied++) {
+                        ret = sst25l_wait_till_ready(flash);
+                        if (ret)
+                                goto out;
+
+                        command[1] = buf[i + j];
+                        ret = spi_write(flash->spi, command, 2);
+                        if (ret)
+                                goto out;
+                }
+        }
+
+out:
+        ret = sst25l_write_enable(flash, 0);
+
+        if (retlen)
+                *retlen = copied;
+
+        mutex_unlock(&flash->lock);
+        return ret;
+}
+
+static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
+{
+        struct flash_info *flash_info = NULL;
+        unsigned char command[4], response;
+        int i, err;
+        uint16_t id;
+
+        command[0] = SST25L_CMD_READ_ID;
+        command[1] = 0;
+        command[2] = 0;
+        command[3] = 0;
+        err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+        if (err < 0) {
+                dev_err(&spi->dev, "error reading device id msb\n");
+                return NULL;
+        }
+
+        id = response << 8;
+
+        command[0] = SST25L_CMD_READ_ID;
+        command[1] = 0;
+        command[2] = 0;
+        command[3] = 1;
+        err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+        if (err < 0) {
+                dev_err(&spi->dev, "error reading device id lsb\n");
+                return NULL;
+        }
+
+        id |= response;
+
+        for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
+                if (sst25l_flash_info[i].device_id == id)
+                        flash_info = &sst25l_flash_info[i];
+
+        if (!flash_info)
+                dev_err(&spi->dev, "unknown id %.4x\n", id);
+
+        return flash_info;
+}
+
+static int __init sst25l_probe(struct spi_device *spi)
+{
+        struct flash_info *flash_info;
+        struct sst25l_flash *flash;
+        struct flash_platform_data *data;
+        int ret, i;
+
+        flash_info = sst25l_match_device(spi);
+        if (!flash_info)
+                return -ENODEV;
+
+        flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+        if (!flash)
+                return -ENOMEM;
+
+        flash->spi = spi;
+        mutex_init(&flash->lock);
+        dev_set_drvdata(&spi->dev, flash);
+
+        data = spi->dev.platform_data;
+        if (data && data->name)
+                flash->mtd.name = data->name;
+        else
+                flash->mtd.name = dev_name(&spi->dev);
+
+        flash->mtd.type         = MTD_NORFLASH;
+        flash->mtd.flags        = MTD_CAP_NORFLASH;
+        flash->mtd.erasesize    = flash_info->erase_size;
+        flash->mtd.writesize    = flash_info->page_size;
+        flash->mtd.size         = flash_info->page_size * flash_info->nr_pages;
+        flash->mtd.erase        = sst25l_erase;
+        flash->mtd.read         = sst25l_read;
+        flash->mtd.write        = sst25l_write;
+
+        dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
+                 (long long)flash->mtd.size >> 10);
+
+        DEBUG(MTD_DEBUG_LEVEL2,
+              "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+              ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+              flash->mtd.name,
+              (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
+              flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+              flash->mtd.numeraseregions);
+
+        if (flash->mtd.numeraseregions)
+                for (i = 0; i < flash->mtd.numeraseregions; i++)
+                        DEBUG(MTD_DEBUG_LEVEL2,
+                              "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+                              ".erasesize = 0x%.8x (%uKiB), "
+                              ".numblocks = %d }\n",
+                              i, (long long)flash->mtd.eraseregions[i].offset,
+                              flash->mtd.eraseregions[i].erasesize,
+                              flash->mtd.eraseregions[i].erasesize / 1024,
+                              flash->mtd.eraseregions[i].numblocks);
+
+        if (mtd_has_partitions()) {
+                struct mtd_partition *parts = NULL;
+                int nr_parts = 0;
+
+                if (mtd_has_cmdlinepart()) {
+                        static const char *part_probes[] =
+                                {"cmdlinepart", NULL};
+
+                        nr_parts = parse_mtd_partitions(&flash->mtd,
+                                                        part_probes,
+                                                        &parts, 0);
+                }
+
+                if (nr_parts <= 0 && data && data->parts) {
+                        parts = data->parts;
+                        nr_parts = data->nr_parts;
+                }
+
+                if (nr_parts > 0) {
+                        for (i = 0; i < nr_parts; i++) {
+                                DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
+                                      "{.name = %s, .offset = 0x%llx, "
+                                      ".size = 0x%llx (%lldKiB) }\n",
+                                      i, parts[i].name,
+                                      (long long)parts[i].offset,
+                                      (long long)parts[i].size,
+                                      (long long)(parts[i].size >> 10));
+                        }
+
+                        flash->partitioned = 1;
+                        return add_mtd_partitions(&flash->mtd,
+                                                  parts, nr_parts);
+                }
+
+        } else if (data->nr_parts) {
+                dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
+                         data->nr_parts, data->name);
+        }
+
+        ret = add_mtd_device(&flash->mtd);
+        if (ret == 1) {
+                kfree(flash);
+                dev_set_drvdata(&spi->dev, NULL);
+                return -ENODEV;
+        }
+
+        return 0;
+}
+
+static int __exit sst25l_remove(struct spi_device *spi)
+{
+        struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
+        int ret;
+
+        if (mtd_has_partitions() && flash->partitioned)
+                ret = del_mtd_partitions(&flash->mtd);
+        else
+                ret = del_mtd_device(&flash->mtd);
+        if (ret == 0)
+                kfree(flash);
+        return ret;
+}
+
+static struct spi_driver sst25l_driver = {
+        .driver = {
+                .name   = "sst25l",
+                .bus    = &spi_bus_type,
+                .owner  = THIS_MODULE,
+        },
+        .probe          = sst25l_probe,
+        .remove         = __exit_p(sst25l_remove),
+};
+
+static int __init sst25l_init(void)
+{
+        return spi_register_driver(&sst25l_driver);
+}
+
+static void __exit sst25l_exit(void)
+{
+        spi_unregister_driver(&sst25l_driver);
+}
+
+module_init(sst25l_init);
+module_exit(sst25l_exit);
+
+MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
+MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
+              "Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index d8cf29c01cc4..8aca5523a337 100644..100755
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -550,7 +550,7 @@ hitused:
                          * waiting to be picked up. We're going to have to fold
                          * a chain to make room.
                          */
-                        thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL);
+                        thisEUN = INFTL_makefreeblock(inftl, block);
 
                         /*
                          * Hopefully we free something, lets try again.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7a58bd5522fd..3a9a960644b6 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -484,9 +484,19 @@ config MTD_BFIN_ASYNC
 
           If compiled as a module, it will be called bfin-async-flash.
 
+config MTD_GPIO_ADDR
+        tristate "GPIO-assisted Flash Chip Support"
+        depends on MTD_COMPLEX_MAPPINGS
+        select MTD_PARTITIONS
+        help
+          Map driver which allows flashes to be partially physically addressed
+          and assisted by GPIOs.
+
+          If compiled as a module, it will be called gpio-addr-flash.
+
 config MTD_UCLINUX
         bool "Generic uClinux RAM/ROM filesystem support"
-        depends on MTD_PARTITIONS && MTD_RAM && !MMU
+        depends on MTD_PARTITIONS && MTD_RAM=y && !MMU
         help
           Map driver to support image based filesystems for uClinux.
 
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 5beb0662d724..1d5cf8636723 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,5 +58,4 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)      += omap_nor.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)  += intel_vr_nor.o
 obj-$(CONFIG_MTD_BFIN_ASYNC)    += bfin-async-flash.o
-obj-$(CONFIG_MTD_RBTX4939)      += rbtx4939-flash.o
-obj-$(CONFIG_MTD_VMU)           += vmu-flash.o
+obj-$(CONFIG_MTD_GPIO_ADDR)     += gpio-addr-flash.o
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
new file mode 100644
index 000000000000..44ef9a49a860
--- /dev/null
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -0,0 +1,311 @@
+/*
+ * drivers/mtd/maps/gpio-addr-flash.c
+ *
+ * Handle the case where a flash device is mostly addressed using physical
+ * line and supplemented by GPIOs.  This way you can hook up say a 8MiB flash
+ * to a 2MiB memory range and use the GPIOs to select a particular range.
+ *
+ * Copyright © 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright © 2005-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "gpio-addr-flash"
+#define PFX DRIVER_NAME ": "
+
+/**
+ * struct async_state - keep GPIO flash state
+ *      @mtd:         MTD state for this mapping
+ *      @map:         MTD map state for this flash
+ *      @gpio_count:  number of GPIOs used to address
+ *      @gpio_addrs:  array of GPIOs to twiddle
+ *      @gpio_values: cached GPIO values
+ *      @win_size:    dedicated memory size (if no GPIOs)
+ */
+struct async_state {
+        struct mtd_info *mtd;
+        struct map_info map;
+        size_t gpio_count;
+        unsigned *gpio_addrs;
+        int *gpio_values;
+        unsigned long win_size;
+};
+#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
+
+/**
+ * gf_set_gpios() - set GPIO address lines to access specified flash offset
+ *      @state: GPIO flash state
+ *      @ofs:   desired offset to access
+ *
+ * Rather than call the GPIO framework every time, cache the last-programmed
+ * value.  This speeds up sequential accesses (which are by far the most common
+ * type).  We rely on the GPIO framework to treat non-zero value as high so
+ * that we don't have to normalize the bits.
+ */
+static void gf_set_gpios(struct async_state *state, unsigned long ofs)
+{
+        size_t i = 0;
+        int value;
+        ofs /= state->win_size;
+        do {
+                value = ofs & (1 << i);
+                if (state->gpio_values[i] != value) {
+                        gpio_set_value(state->gpio_addrs[i], value);
+                        state->gpio_values[i] = value;
+                }
+        } while (++i < state->gpio_count);
+}
+
+/**
+ * gf_read() - read a word at the specified offset
+ *      @map: MTD map state
+ *      @ofs: desired offset to read
+ */
+static map_word gf_read(struct map_info *map, unsigned long ofs)
+{
+        struct async_state *state = gf_map_info_to_state(map);
+        uint16_t word;
+        map_word test;
+
+        gf_set_gpios(state, ofs);
+
+        word = readw(map->virt + (ofs % state->win_size));
+        test.x[0] = word;
+        return test;
+}
+
+/**
+ * gf_copy_from() - copy a chunk of data from the flash
+ *      @map:  MTD map state
+ *      @to:   memory to copy to
+ *      @from: flash offset to copy from
+ *      @len:  how much to copy
+ *
+ * We rely on the MTD layer to chunk up copies such that a single request here
+ * will not cross a window size.  This allows us to only wiggle the GPIOs once
+ * before falling back to a normal memcpy.  Reading the higher layer code shows
+ * that this is indeed the case, but add a BUG_ON() to future proof.
+ */
+static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+        struct async_state *state = gf_map_info_to_state(map);
+
+        gf_set_gpios(state, from);
+
+        /* BUG if operation crosses the win_size */
+        BUG_ON(!((from + len) % state->win_size <= (from + len)));
+
+        /* operation does not cross the win_size, so one shot it */
+        memcpy_fromio(to, map->virt + (from % state->win_size), len);
+}
+
+/**
+ * gf_write() - write a word at the specified offset
+ *      @map: MTD map state
+ *      @ofs: desired offset to write
+ */
+static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+        struct async_state *state = gf_map_info_to_state(map);
+        uint16_t d;
+
+        gf_set_gpios(state, ofs);
+
+        d = d1.x[0];
+        writew(d, map->virt + (ofs % state->win_size));
+}
+
+/**
+ * gf_copy_to() - copy a chunk of data to the flash
+ *      @map:  MTD map state
+ *      @to:   flash offset to copy to
+ *      @from: memory to copy from
+ *      @len:  how much to copy
+ *
+ * See gf_copy_from() caveat.
+ */
+static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+        struct async_state *state = gf_map_info_to_state(map);
+
+        gf_set_gpios(state, to);
+
+        /* BUG if operation crosses the win_size */
+        BUG_ON(!((to + len) % state->win_size <= (to + len)));
+
+        /* operation does not cross the win_size, so one shot it */
+        memcpy_toio(map->virt + (to % state->win_size), from, len);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+/**
+ * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
+ *      @pdev: platform device
+ *
+ * The platform resource layout expected looks something like:
+ * struct mtd_partition partitions[] = { ... };
+ * struct physmap_flash_data flash_data = { ... };
+ * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... };
+ * struct resource flash_resource[] = {
+ *      {
+ *              .name  = "cfi_probe",
+ *              .start = 0x20000000,
+ *              .end   = 0x201fffff,
+ *              .flags = IORESOURCE_MEM,
+ *      }, {
+ *              .start = (unsigned long)flash_gpios,
+ *              .end   = ARRAY_SIZE(flash_gpios),
+ *              .flags = IORESOURCE_IRQ,
+ *      }
+ * };
+ * struct platform_device flash_device = {
+ *      .name          = "gpio-addr-flash",
+ *      .dev           = { .platform_data = &flash_data, },
+ *      .num_resources = ARRAY_SIZE(flash_resource),
+ *      .resource      = flash_resource,
+ *      ...
+ * };
+ */
+static int __devinit gpio_flash_probe(struct platform_device *pdev)
+{
+        int ret;
+        size_t i, arr_size;
+        struct physmap_flash_data *pdata;
+        struct resource *memory;
+        struct resource *gpios;
+        struct async_state *state;
+
+        pdata = pdev->dev.platform_data;
+        memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+        if (!memory || !gpios || !gpios->end)
+                return -EINVAL;
+
+        arr_size = sizeof(int) * gpios->end;
+        state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL);
+        if (!state)
+                return -ENOMEM;
+
+        state->gpio_count     = gpios->end;
+        state->gpio_addrs     = (void *)gpios->start;
+        state->gpio_values    = (void *)(state + 1);
+        state->win_size       = memory->end - memory->start + 1;
+        memset(state->gpio_values, 0xff, arr_size);
+
+        state->map.name       = DRIVER_NAME;
+        state->map.read       = gf_read;
+        state->map.copy_from  = gf_copy_from;
+        state->map.write      = gf_write;
+        state->map.copy_to    = gf_copy_to;
+        state->map.bankwidth  = pdata->width;
+        state->map.size       = state->win_size * (1 << state->gpio_count);
+        state->map.virt       = (void __iomem *)memory->start;
+        state->map.phys       = NO_XIP;
+        state->map.map_priv_1 = (unsigned long)state;
+
+        platform_set_drvdata(pdev, state);
+
+        i = 0;
+        do {
+                if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) {
+                        pr_devinit(KERN_ERR PFX "failed to request gpio %d\n",
+                                state->gpio_addrs[i]);
+                        while (i--)
+                                gpio_free(state->gpio_addrs[i]);
+                        kfree(state);
+                        return -EBUSY;
+                }
+                gpio_direction_output(state->gpio_addrs[i], 0);
+        } while (++i < state->gpio_count);
+
+        pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n",
+                state->map.bankwidth * 8);
+        state->mtd = do_map_probe(memory->name, &state->map);
+        if (!state->mtd) {
+                for (i = 0; i < state->gpio_count; ++i)
+                        gpio_free(state->gpio_addrs[i]);
+                kfree(state);
+                return -ENXIO;
+        }
+
+#ifdef CONFIG_MTD_PARTITIONS
+        ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+        if (ret > 0) {
+                pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
+                add_mtd_partitions(state->mtd, pdata->parts, ret);
+                kfree(pdata->parts);
+
+        } else if (pdata->nr_parts) {
+                pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
+                add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+        } else
+#endif
+        {
+                pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
+                add_mtd_device(state->mtd);
+        }
+
+        return 0;
+}
+
+static int __devexit gpio_flash_remove(struct platform_device *pdev)
+{
+        struct async_state *state = platform_get_drvdata(pdev);
+        size_t i = 0;
+        do {
+                gpio_free(state->gpio_addrs[i]);
+        } while (++i < state->gpio_count);
+#ifdef CONFIG_MTD_PARTITIONS
+        del_mtd_partitions(state->mtd);
+#endif
+        map_destroy(state->mtd);
+        kfree(state);
+        return 0;
+}
+
+static struct platform_driver gpio_flash_driver = {
+        .probe          = gpio_flash_probe,
+        .remove         = __devexit_p(gpio_flash_remove),
+        .driver         = {
+                .name   = DRIVER_NAME,
+        },
+};
+
+static int __init gpio_flash_init(void)
+{
+        return platform_driver_register(&gpio_flash_driver);
+}
+module_init(gpio_flash_init);
+
+static void __exit gpio_flash_exit(void)
+{
+        platform_driver_unregister(&gpio_flash_driver);
+}
+module_exit(gpio_flash_exit);
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 39d357b2eb47..61e4eb48bb2d 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -190,6 +190,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
         const u32 *p;
         int reg_tuple_size;
         struct mtd_info **mtd_list = NULL;
+        resource_size_t res_size;
 
         reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
 
@@ -204,7 +205,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
                 dev_err(&dev->dev, "Malformed reg property on %s\n",
                                 dev->node->full_name);
                 err = -EINVAL;
-                goto err_out;
+                goto err_flash_remove;
         }
         count /= reg_tuple_size;
 
@@ -212,14 +213,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
         info = kzalloc(sizeof(struct of_flash) +
                        sizeof(struct of_flash_list) * count, GFP_KERNEL);
         if (!info)
-                goto err_out;
-
-        mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
-        if (!info)
-                goto err_out;
+                goto err_flash_remove;
 
         dev_set_drvdata(&dev->dev, info);
 
+        mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
+        if (!mtd_list)
+                goto err_flash_remove;
+
         for (i = 0; i < count; i++) {
                 err = -ENXIO;
                 if (of_address_to_resource(dp, i, &res)) {
@@ -233,8 +234,8 @@ static int __devinit of_flash_probe(struct of_device *dev,
                         (unsigned long long)res.end);
 
                 err = -EBUSY;
-                info->list[i].res = request_mem_region(res.start, res.end -
-                                                       res.start + 1,
+                res_size = resource_size(&res);
+                info->list[i].res = request_mem_region(res.start, res_size,
                                                        dev_name(&dev->dev));
                 if (!info->list[i].res)
                         goto err_out;
@@ -249,7 +250,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 
                 info->list[i].map.name = dev_name(&dev->dev);
                 info->list[i].map.phys = res.start;
-                info->list[i].map.size = res.end - res.start + 1;
+                info->list[i].map.size = res_size;
                 info->list[i].map.bankwidth = *width;
 
                 err = -ENOMEM;
@@ -338,6 +339,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 
 err_out:
         kfree(mtd_list);
+err_flash_remove:
         of_flash_remove(dev);
 
         return err;
@@ -360,6 +362,10 @@ static struct of_device_id of_flash_match[] = {
                 .data           = (void *)"jedec_probe",
         },
         {
+                .compatible     = "mtd-ram",
+                .data           = (void *)"map_ram",
+        },
+        {
                 .type           = "rom",
                 .compatible     = "direct-mapped"
         },
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 49c9ece76477..dafb91944e70 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -175,7 +175,7 @@ static int platram_probe(struct platform_device *pdev)
         /* setup map parameters */
 
         info->map.phys = res->start;
-        info->map.size = (res->end - res->start) + 1;
+        info->map.size = resource_size(res);
         info->map.name = pdata->mapname != NULL ?
                         (char *)pdata->mapname : (char *)pdev->name;
         info->map.bankwidth = pdata->bankwidth;
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index 4768bd5459d6..c8fd8da4bc87 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -50,7 +50,7 @@ static int fcnt;
 
 static int __init init_msp_flash(void)
 {
-        int i, j;
+        int i, j, ret = -ENOMEM;
         int offset, coff;
         char *env;
         int pcnt;
@@ -75,14 +75,16 @@ static int __init init_msp_flash(void)
         printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
 
         msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL);
+        if (!msp_flash)
+                return -ENOMEM;
+
         msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
+        if (!msp_parts)
+                goto free_msp_flash;
+
         msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL);
-        if (!msp_flash || !msp_parts || !msp_maps) {
-                kfree(msp_maps);
-                kfree(msp_parts);
-                kfree(msp_flash);
-                return -ENOMEM;
-        }
+        if (!msp_maps)
+                goto free_msp_parts;
 
         /* loop over the flash devices, initializing each */
         for (i = 0; i < fcnt; i++) {
@@ -100,13 +102,18 @@ static int __init init_msp_flash(void)
 
                 msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition),
                                        GFP_KERNEL);
+                if (!msp_parts[i])
+                        goto cleanup_loop;
 
                 /* now initialize the devices proper */
                 flash_name[5] = '0' + i;
                 env = prom_getenv(flash_name);
 
-                if (sscanf(env, "%x:%x", &addr, &size) < 2)
-                        return -ENXIO;
+                if (sscanf(env, "%x:%x", &addr, &size) < 2) {
+                        ret = -ENXIO;
+                        kfree(msp_parts[i]);
+                        goto cleanup_loop;
+                }
                 addr = CPHYSADDR(addr);
 
                 printk(KERN_NOTICE
@@ -122,13 +129,23 @@ static int __init init_msp_flash(void)
                  */
                 if (size > CONFIG_MSP_FLASH_MAP_LIMIT)
                         size = CONFIG_MSP_FLASH_MAP_LIMIT;
+
                 msp_maps[i].virt = ioremap(addr, size);
+                if (msp_maps[i].virt == NULL) {
+                        ret = -ENXIO;
+                        kfree(msp_parts[i]);
+                        goto cleanup_loop;
+                }
+
                 msp_maps[i].bankwidth = 1;
-                msp_maps[i].name = strncpy(kmalloc(7, GFP_KERNEL),
-                                        flash_name, 7);
+                msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+                if (!msp_maps[i].name) {
+                        iounmap(msp_maps[i].virt);
+                        kfree(msp_parts[i]);
+                        goto cleanup_loop;
+                }
 
-                if (msp_maps[i].virt == NULL)
-                        return -ENXIO;
+                msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
 
                 for (j = 0; j < pcnt; j++) {
                         part_name[5] = '0' + i;
@@ -136,8 +153,14 @@ static int __init init_msp_flash(void)
 
                         env = prom_getenv(part_name);
 
-                        if (sscanf(env, "%x:%x:%n", &offset, &size, &coff) < 2)
-                                return -ENXIO;
+                        if (sscanf(env, "%x:%x:%n", &offset, &size,
+                                                &coff) < 2) {
+                                ret = -ENXIO;
+                                kfree(msp_maps[i].name);
+                                iounmap(msp_maps[i].virt);
+                                kfree(msp_parts[i]);
+                                goto cleanup_loop;
+                        }
 
                         msp_parts[i][j].size = size;
                         msp_parts[i][j].offset = offset;
@@ -152,18 +175,37 @@ static int __init init_msp_flash(void)
                         add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt);
                 } else {
                         printk(KERN_ERR "map probe failed for flash\n");
-                        return -ENXIO;
+                        ret = -ENXIO;
+                        kfree(msp_maps[i].name);
+                        iounmap(msp_maps[i].virt);
+                        kfree(msp_parts[i]);
+                        goto cleanup_loop;
                 }
         }
 
         return 0;
+
+cleanup_loop:
+        while (i--) {
+                del_mtd_partitions(msp_flash[i]);
+                map_destroy(msp_flash[i]);
+                kfree(msp_maps[i].name);
+                iounmap(msp_maps[i].virt);
+                kfree(msp_parts[i]);
+        }
+        kfree(msp_maps);
+free_msp_parts:
+        kfree(msp_parts);
+free_msp_flash:
+        kfree(msp_flash);
+        return ret;
 }
 
 static void __exit cleanup_msp_flash(void)
 {
         int i;
 
-        for (i = 0; i < sizeof(msp_flash) / sizeof(struct mtd_info **); i++) {
+        for (i = 0; i < fcnt; i++) {
                 del_mtd_partitions(msp_flash[i]);
                 map_destroy(msp_flash[i]);
                 iounmap((void *)msp_maps[i].virt);
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index d4314fb88212..35009294b435 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -89,7 +89,11 @@ static int __init uclinux_mtd_init(void)
         mtd->priv = mapp;
 
         uclinux_ram_mtdinfo = mtd;
+#ifdef CONFIG_MTD_PARTITIONS
         add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS);
+#else
+        add_mtd_device(mtd);
+#endif
 
         return(0);
 }
@@ -99,7 +103,11 @@ static int __init uclinux_mtd_init(void)
 static void __exit uclinux_mtd_cleanup(void)
 {
         if (uclinux_ram_mtdinfo) {
+#ifdef CONFIG_MTD_PARTITIONS
                 del_mtd_partitions(uclinux_ram_mtdinfo);
+#else
+                del_mtd_device(uclinux_ram_mtdinfo);
+#endif
                 map_destroy(uclinux_ram_mtdinfo);
                 uclinux_ram_mtdinfo = NULL;
         }
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 2d70295a5fa3..9f41b1a853c1 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -84,7 +84,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
         remove_wait_queue(&wait_q, &wait);
 
         /*
-         * Next, writhe data to flash.
+         * Next, write the data to flash.
          */
 
         ret = mtd->write(mtd, pos, len, &retlen, buf);
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 792b547786b8..db6de74082ad 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -427,7 +427,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
                  * to-be-erased area begins. Verify that the starting
                  * offset is aligned to this region's erase size:
                  */
-                if (instr->addr & (erase_regions[i].erasesize - 1))
+                if (i < 0 || instr->addr & (erase_regions[i].erasesize - 1))
                         return -EINVAL;
 
                 /*
@@ -440,8 +440,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
                 /*
                  * check if the ending offset is aligned to this region's erase size
                  */
-                if ((instr->addr + instr->len) & (erase_regions[i].erasesize -
-                                                  1))
+                if (i < 0 || ((instr->addr + instr->len) &
+                                        (erase_regions[i].erasesize - 1)))
                         return -EINVAL;
         }
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 69007a6eff50..467a4f177bfb 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -213,11 +213,11 @@ static struct attribute *mtd_attrs[] = {
         NULL,
 };
 
-struct attribute_group mtd_group = {
+static struct attribute_group mtd_group = {
         .attrs          = mtd_attrs,
 };
 
-const struct attribute_group *mtd_groups[] = {
+static const struct attribute_group *mtd_groups[] = {
         &mtd_group,
         NULL,
 };
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 742504ea96f5..b8043a9ba32d 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -453,7 +453,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
                 for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
                         ;
                 /* The loop searched for the region _behind_ the first one */
-                i--;
+                if (i > 0)
+                        i--;
 
                 /* Pick biggest erasesize */
                 for (; i < max && regions[i].offset < end; i++) {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ce96c091f01b..2fda0b615246 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -80,6 +80,23 @@ config MTD_NAND_OMAP2
         help
           Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
+config MTD_NAND_OMAP_PREFETCH
+        bool "GPMC prefetch support for NAND Flash device"
+        depends on MTD_NAND && MTD_NAND_OMAP2
+        default y
+        help
+         The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
+         to improve the performance.
+
+config MTD_NAND_OMAP_PREFETCH_DMA
+        depends on MTD_NAND_OMAP_PREFETCH
+        bool "DMA mode"
+        default n
+        help
+         The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
+         or in DMA interrupt mode.
+         Say y for DMA mode or MPU mode will be used
+
 config MTD_NAND_TS7250
         tristate "NAND Flash device on TS-7250 board"
         depends on MACH_TS72XX
@@ -426,6 +443,12 @@ config MTD_NAND_MXC
           This enables the driver for the NAND flash controller on the
           MXC processors.
 
+config MTD_NAND_NOMADIK
+        tristate "ST Nomadik 8815 NAND support"
+        depends on ARCH_NOMADIK
+        help
+          Driver for the NAND flash controller on the Nomadik, with ECC.
+
 config MTD_NAND_SH_FLCTL
         tristate "Support for NAND on Renesas SuperH FLCTL"
         depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
@@ -452,4 +475,11 @@ config MTD_NAND_SOCRATES
         help
           Enables support for NAND Flash chips wired onto Socrates board.
 
+config MTD_NAND_W90P910
+        tristate "Support for NAND on w90p910 evaluation board."
+        depends on ARCH_W90X900 && MTD_PARTITIONS
+        help
+          This enables the driver for the NAND Flash on evaluation board based
+          on w90p910.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f3a786b3cff3..6950d3dabf10 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -40,5 +40,7 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
 obj-$(CONFIG_MTD_NAND_MXC)              += mxc_nand.o
 obj-$(CONFIG_MTD_NAND_SOCRATES)         += socrates_nand.o
 obj-$(CONFIG_MTD_NAND_TXX9NDFMC)        += txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_W90P910)          += w90p910_nand.o
+obj-$(CONFIG_MTD_NAND_NOMADIK)          += nomadik_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 20c828ba9405..f8e9975c86e5 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -218,7 +218,7 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
  * buf:        buffer to store read data
  */
 static int atmel_nand_read_page(struct mtd_info *mtd,
-                struct nand_chip *chip, uint8_t *buf)
+                struct nand_chip *chip, uint8_t *buf, int page)
 {
         int eccsize = chip->ecc.size;
         int eccbytes = chip->ecc.bytes;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 1b4690bdfdb3..c828d9ac7bd7 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -381,7 +381,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
  * we need a special oob layout and handling.
  */
 static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-                               uint8_t *buf)
+                               uint8_t *buf, int page)
 {
         struct cafe_priv *cafe = mtd->priv;
 
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 0fad6487e6f4..f13f5b9afaf7 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -348,6 +348,12 @@ compare:
         if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
                 return 0;
 
+        /*
+         * Clear any previous address calculation by doing a dummy read of an
+         * error address register.
+         */
+        davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET);
+
         /* Start address calculation, and wait for it to complete.
          * We _could_ start reading more data while this is working,
          * to speed up the overall page read.
@@ -359,8 +365,10 @@ compare:
 
                 switch ((fsr >> 8) & 0x0f) {
                 case 0:         /* no error, should not happen */
+                        davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
                         return 0;
                 case 1:         /* five or more errors detected */
+                        davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
                         return -EIO;
                 case 2:         /* error addresses computed */
                 case 3:
@@ -500,6 +508,26 @@ static struct nand_ecclayout hwecc4_small __initconst = {
         },
 };
 
+/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_2048 __initconst = {
+        .eccbytes = 40,
+        .eccpos = {
+                /* at the end of spare sector */
+                24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
+                34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
+                44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+                54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+                },
+        .oobfree = {
+                /* 2 bytes at offset 0 hold manufacturer badblock markers */
+                {.offset = 2, .length = 22, },
+                /* 5 bytes at offset 8 hold BBT markers */
+                /* 8 bytes at offset 16 hold JFFS2 clean markers */
+        },
+};
 
 static int __init nand_davinci_probe(struct platform_device *pdev)
 {
@@ -690,15 +718,20 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
                                 info->mtd.oobsize - 16;
                         goto syndrome_done;
                 }
+                if (chunks == 4) {
+                        info->ecclayout = hwecc4_2048;
+                        info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+                        goto syndrome_done;
+                }
 
-                /* For large page chips we'll be wanting to use a
-                 * not-yet-implemented mode that reads OOB data
-                 * before reading the body of the page, to avoid
-                 * the "infix OOB" model of NAND_ECC_HW_SYNDROME
-                 * (and preserve manufacturer badblock markings).
+                /* 4KiB page chips are not yet supported. The eccpos from
+                 * nand_ecclayout cannot hold 80 bytes and change to eccpos[]
+                 * breaks userspace ioctl interface with mtd-utils. Once we
+                 * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
+                 * for the 4KiB page chips.
                  */
                 dev_warn(&pdev->dev, "no 4-bit ECC support yet "
-                                "for large page NAND\n");
+                                "for 4KiB-page NAND\n");
                 ret = -EIO;
                 goto err_scan;
 
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 1f6eb2578717..ddd37d2554ed 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -739,7 +739,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 
 static int fsl_elbc_read_page(struct mtd_info *mtd,
                               struct nand_chip *chip,
-                              uint8_t *buf)
+                              uint8_t *buf,
+                              int page)
 {
         fsl_elbc_read_buf(mtd, buf, mtd->writesize);
         fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 76beea40d2cf..65b26d5a5c0d 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -857,6 +857,17 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
         }
 }
 
+/* Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks. */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr smallpage_memorybased = {
+        .options = NAND_BBT_SCAN2NDPAGE,
+        .offs = 5,
+        .len = 1,
+        .pattern = scan_ff_pattern
+};
+
 static int __init mxcnd_probe(struct platform_device *pdev)
 {
         struct nand_chip *this;
@@ -973,7 +984,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
                 goto escan;
         }
 
-        host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0;
+        if (mtd->writesize == 2048) {
+                host->pagesize_2k = 1;
+                this->badblock_pattern = &smallpage_memorybased;
+        }
 
         if (this->ecc.mode == NAND_ECC_HW) {
                 switch (mtd->oobsize) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8c21b89d2d0c..22113865438b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -688,8 +688,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
  retry:
         spin_lock(lock);
 
-        /* Hardware controller shared among independend devices */
-        /* Hardware controller shared among independend devices */
+        /* Hardware controller shared among independent devices */
         if (!chip->controller->active)
                 chip->controller->active = chip;
 
@@ -766,7 +765,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
  * Not for syndrome calculating ecc controllers, which use a special oob layout
  */
 static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-                              uint8_t *buf)
+                              uint8_t *buf, int page)
 {
         chip->read_buf(mtd, buf, mtd->writesize);
         chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -782,7 +781,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
  * We need a special oob layout and handling even when OOB isn't used.
  */
 static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-                              uint8_t *buf)
+                              uint8_t *buf, int page)
 {
         int eccsize = chip->ecc.size;
         int eccbytes = chip->ecc.bytes;
@@ -821,7 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c
  * @buf:        buffer to store read data
  */
 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
-                                uint8_t *buf)
+                                uint8_t *buf, int page)
 {
         int i, eccsize = chip->ecc.size;
         int eccbytes = chip->ecc.bytes;
@@ -831,7 +830,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
         uint8_t *ecc_code = chip->buffers->ecccode;
         uint32_t *eccpos = chip->ecc.layout->eccpos;
 
-        chip->ecc.read_page_raw(mtd, chip, buf);
+        chip->ecc.read_page_raw(mtd, chip, buf, page);
 
         for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
                 chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -944,7 +943,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
  * Not for syndrome calculating ecc controllers which need a special oob layout
  */
 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-                                uint8_t *buf)
+                                uint8_t *buf, int page)
 {
         int i, eccsize = chip->ecc.size;
         int eccbytes = chip->ecc.bytes;
@@ -980,6 +979,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
+ * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
+ * @mtd:        mtd info structure
+ * @chip:       nand chip info structure
+ * @buf:        buffer to store read data
+ *
+ * Hardware ECC for large page chips, require OOB to be read first.
+ * For this ECC mode, the write_page method is re-used from ECC_HW.
+ * These methods read/write ECC from the OOB area, unlike the
+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
+ * "infix ECC" scheme and reads/writes ECC from the data area, by
+ * overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+        struct nand_chip *chip, uint8_t *buf, int page)
+{
+        int i, eccsize = chip->ecc.size;
+        int eccbytes = chip->ecc.bytes;
+        int eccsteps = chip->ecc.steps;
+        uint8_t *p = buf;
+        uint8_t *ecc_code = chip->buffers->ecccode;
+        uint32_t *eccpos = chip->ecc.layout->eccpos;
+        uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+        /* Read the OOB area first */
+        chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+        chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+        chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+        for (i = 0; i < chip->ecc.total; i++)
+                ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+        for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+                int stat;
+
+                chip->ecc.hwctl(mtd, NAND_ECC_READ);
+                chip->read_buf(mtd, p, eccsize);
+                chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+                stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+                if (stat < 0)
+                        mtd->ecc_stats.failed++;
+                else
+                        mtd->ecc_stats.corrected += stat;
+        }
+        return 0;
+}
+
+/**
  * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
  * @mtd:        mtd info structure
  * @chip:       nand chip info structure
@@ -989,7 +1036,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
  * we need a special oob layout and handling.
  */
 static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-                                   uint8_t *buf)
+                                   uint8_t *buf, int page)
 {
         int i, eccsize = chip->ecc.size;
         int eccbytes = chip->ecc.bytes;
@@ -1131,11 +1178,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
                         /* Now read the page into the buffer */
                         if (unlikely(ops->mode == MTD_OOB_RAW))
-                                ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+                                ret = chip->ecc.read_page_raw(mtd, chip,
+                                                              bufpoi, page);
                         else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
                                 ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
                         else
-                                ret = chip->ecc.read_page(mtd, chip, bufpoi);
+                                ret = chip->ecc.read_page(mtd, chip, bufpoi,
+                                                          page);
                         if (ret < 0)
                                 break;
 
@@ -1413,8 +1462,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
         int len;
         uint8_t *buf = ops->oobbuf;
 
-        DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
-              (unsigned long long)from, readlen);
+        DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+                        __func__, (unsigned long long)from, readlen);
 
         if (ops->mode == MTD_OOB_AUTO)
                 len = chip->ecc.layout->oobavail;
@@ -1422,8 +1471,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
                 len = mtd->oobsize;
 
         if (unlikely(ops->ooboffs >= len)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
-                        "Attempt to start read outside oob\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
+                                        "outside oob\n", __func__);
                 return -EINVAL;
         }
 
@@ -1431,8 +1480,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
         if (unlikely(from >= mtd->size ||
                      ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
                                         (from >> chip->page_shift)) * len)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
-                        "Attempt read beyond end of device\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
+                                        "of device\n", __func__);
                 return -EINVAL;
         }
 
@@ -1506,8 +1555,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 
         /* Do not allow reads past end of device */
         if (ops->datbuf && (from + ops->len) > mtd->size) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
-                      "Attempt read beyond end of device\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
+                                "beyond end of device\n", __func__);
                 return -EINVAL;
         }
 
@@ -1816,8 +1865,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 
         /* reject writes, which are not page aligned */
         if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-                printk(KERN_NOTICE "nand_write: "
-                       "Attempt to write not page aligned data\n");
+                printk(KERN_NOTICE "%s: Attempt to write not "
+                                "page aligned data\n", __func__);
                 return -EINVAL;
         }
 
@@ -1944,8 +1993,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
         int chipnr, page, status, len;
         struct nand_chip *chip = mtd->priv;
 
-        DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
-              (unsigned int)to, (int)ops->ooblen);
+        DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+                         __func__, (unsigned int)to, (int)ops->ooblen);
 
         if (ops->mode == MTD_OOB_AUTO)
                 len = chip->ecc.layout->oobavail;
@@ -1954,14 +2003,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 
         /* Do not allow write past end of page */
         if ((ops->ooboffs + ops->ooblen) > len) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
-                      "Attempt to write past end of page\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
+                                "past end of page\n", __func__);
                 return -EINVAL;
         }
 
         if (unlikely(ops->ooboffs >= len)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
-                        "Attempt to start write outside oob\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
+                                "write outside oob\n", __func__);
                 return -EINVAL;
         }
 
@@ -1970,8 +2019,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
                      ops->ooboffs + ops->ooblen >
                         ((mtd->size >> chip->page_shift) -
                          (to >> chip->page_shift)) * len)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
-                        "Attempt write beyond end of device\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+                                "end of device\n", __func__);
                 return -EINVAL;
         }
 
@@ -2026,8 +2075,8 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 
         /* Do not allow writes past end of device */
         if (ops->datbuf && (to + ops->len) > mtd->size) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
-                      "Attempt write beyond end of device\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+                                "end of device\n", __func__);
                 return -EINVAL;
         }
 
@@ -2117,26 +2166,27 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
         unsigned int bbt_masked_page = 0xffffffff;
         loff_t len;
 
-        DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, len = %llu\n",
-              (unsigned long long)instr->addr, (unsigned long long)instr->len);
+        DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+                                __func__, (unsigned long long)instr->addr,
+                                (unsigned long long)instr->len);
 
         /* Start address must align on block boundary */
         if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
                 return -EINVAL;
         }
 
         /* Length must align on block boundary */
         if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-                      "Length not block aligned\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
+                                        __func__);
                 return -EINVAL;
         }
 
         /* Do not allow erase past end of device */
         if ((instr->len + instr->addr) > mtd->size) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-                      "Erase past end of device\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n",
+                                        __func__);
                 return -EINVAL;
         }
 
@@ -2157,8 +2207,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
         /* Check, if it is write protected */
         if (nand_check_wp(mtd)) {
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-                      "Device is write protected!!!\n");
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+                                        __func__);
                 instr->state = MTD_ERASE_FAILED;
                 goto erase_exit;
         }
@@ -2183,8 +2233,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
                  */
                 if (nand_block_checkbad(mtd, ((loff_t) page) <<
                                         chip->page_shift, 0, allowbbt)) {
-                        printk(KERN_WARNING "nand_erase: attempt to erase a "
-                               "bad block at page 0x%08x\n", page);
+                        printk(KERN_WARNING "%s: attempt to erase a bad block "
+                                        "at page 0x%08x\n", __func__, page);
                         instr->state = MTD_ERASE_FAILED;
                         goto erase_exit;
                 }
@@ -2211,8 +2261,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
                 /* See if block erase succeeded */
                 if (status & NAND_STATUS_FAIL) {
-                        DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-                              "Failed erase, page 0x%08x\n", page);
+                        DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
+                                        "page 0x%08x\n", __func__, page);
                         instr->state = MTD_ERASE_FAILED;
                         instr->fail_addr =
                                 ((loff_t)page << chip->page_shift);
@@ -2272,9 +2322,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
                 if (!rewrite_bbt[chipnr])
                         continue;
                 /* update the BBT for chip */
-                DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
-                      "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
-                      chip->bbt_td->pages[chipnr]);
+                DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
+                        "(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
+                        rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
                 nand_update_bbt(mtd, rewrite_bbt[chipnr]);
         }
 
@@ -2292,7 +2342,7 @@ static void nand_sync(struct mtd_info *mtd)
 {
         struct nand_chip *chip = mtd->priv;
 
-        DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+        DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
 
         /* Grab the lock and see if the device is available */
         nand_get_device(chip, mtd, FL_SYNCING);
@@ -2356,8 +2406,8 @@ static void nand_resume(struct mtd_info *mtd)
         if (chip->state == FL_PM_SUSPENDED)
                 nand_release_device(mtd);
         else
-                printk(KERN_ERR "nand_resume() called for a chip which is not "
-                       "in suspended state\n");
+                printk(KERN_ERR "%s called for a chip which is not "
+                       "in suspended state\n", __func__);
 }
 
 /*
@@ -2671,6 +2721,17 @@ int nand_scan_tail(struct mtd_info *mtd)
          */
 
         switch (chip->ecc.mode) {
+        case NAND_ECC_HW_OOB_FIRST:
+                /* Similar to NAND_ECC_HW, but a separate read_page handle */
+                if (!chip->ecc.calculate || !chip->ecc.correct ||
+                     !chip->ecc.hwctl) {
+                        printk(KERN_WARNING "No ECC functions supplied; "
+                               "Hardware ECC not possible\n");
+                        BUG();
+                }
+                if (!chip->ecc.read_page)
+                        chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
         case NAND_ECC_HW:
                 /* Use standard hwecc read page function ? */
                 if (!chip->ecc.read_page)
@@ -2693,7 +2754,7 @@ int nand_scan_tail(struct mtd_info *mtd)
                      chip->ecc.read_page == nand_read_page_hwecc ||
                      !chip->ecc.write_page ||
                      chip->ecc.write_page == nand_write_page_hwecc)) {
-                        printk(KERN_WARNING "No ECC functions supplied, "
+                        printk(KERN_WARNING "No ECC functions supplied; "
                                "Hardware ECC not possible\n");
                         BUG();
                 }
@@ -2728,7 +2789,8 @@ int nand_scan_tail(struct mtd_info *mtd)
                 chip->ecc.write_page_raw = nand_write_page_raw;
                 chip->ecc.read_oob = nand_read_oob_std;
                 chip->ecc.write_oob = nand_write_oob_std;
-                chip->ecc.size = 256;
+                if (!chip->ecc.size)
+                        chip->ecc.size = 256;
                 chip->ecc.bytes = 3;
                 break;
 
@@ -2858,7 +2920,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
 
         /* Many callers got this wrong, so check for it for a while... */
         if (!mtd->owner && caller_is_module()) {
-                printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+                printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
+                                __func__);
                 BUG();
         }
 
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index c0cb87d6d16e..db7ae9d6a296 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -417,22 +417,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
 EXPORT_SYMBOL(nand_calculate_ecc);
 
 /**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd:        MTD block structure
+ * __nand_correct_data - [NAND Interface] Detect and correct bit error(s)
  * @buf:        raw data read from the chip
  * @read_ecc:   ECC from the chip
  * @calc_ecc:   the ECC calculated from raw data
+ * @eccsize:    data bytes per ecc step (256 or 512)
  *
- * Detect and correct a 1 bit error for 256/512 byte block
+ * Detect and correct a 1 bit error for eccsize byte block
  */
-int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
-                      unsigned char *read_ecc, unsigned char *calc_ecc)
+int __nand_correct_data(unsigned char *buf,
+                        unsigned char *read_ecc, unsigned char *calc_ecc,
+                        unsigned int eccsize)
 {
         unsigned char b0, b1, b2, bit_addr;
         unsigned int byte_addr;
         /* 256 or 512 bytes/ecc  */
-        const uint32_t eccsize_mult =
-                        (((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+        const uint32_t eccsize_mult = eccsize >> 8;
 
         /*
          * b0 to b2 indicate which bit is faulty (if any)
@@ -495,6 +495,23 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
         printk(KERN_ERR "uncorrectable error : ");
         return -1;
 }
+EXPORT_SYMBOL(__nand_correct_data);
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd:        MTD block structure
+ * @buf:        raw data read from the chip
+ * @read_ecc:   ECC from the chip
+ * @calc_ecc:   the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+                      unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+        return __nand_correct_data(buf, read_ecc, calc_ecc,
+                                   ((struct nand_chip *)mtd->priv)->ecc.size);
+}
 EXPORT_SYMBOL(nand_correct_data);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 89bf85af642c..40b5658bdbe6 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd,
         wmb();
         ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
         /* The NDFC uses Smart Media (SMC) bytes order */
-        ecc_code[0] = p[2];
-        ecc_code[1] = p[1];
+        ecc_code[0] = p[1];
+        ecc_code[1] = p[2];
         ecc_code[2] = p[3];
 
         return 0;
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
new file mode 100644
index 000000000000..7c302d55910e
--- /dev/null
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -0,0 +1,250 @@
+/*
+ *  drivers/mtd/nand/nomadik_nand.c
+ *
+ *  Overview:
+ *      Driver for on-board NAND flash on Nomadik Platforms
+ *
+ * Copyright © 2007 STMicroelectronics Pvt. Ltd.
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * Copyright © 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
+
+#include <mtd/mtd-abi.h>
+
+struct nomadik_nand_host {
+        struct mtd_info         mtd;
+        struct nand_chip        nand;
+        void __iomem *data_va;
+        void __iomem *cmd_va;
+        void __iomem *addr_va;
+        struct nand_bbt_descr *bbt_desc;
+};
+
+static struct nand_ecclayout nomadik_ecc_layout = {
+        .eccbytes = 3 * 4,
+        .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
+                0x02, 0x03, 0x04,
+                0x12, 0x13, 0x14,
+                0x22, 0x23, 0x24,
+                0x32, 0x33, 0x34},
+        /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
+        .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
+};
+
+static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
+{
+        /* No need to enable hw ecc, it's on by default */
+}
+
+static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+        struct nand_chip *nand = mtd->priv;
+        struct nomadik_nand_host *host = nand->priv;
+
+        if (cmd == NAND_CMD_NONE)
+                return;
+
+        if (ctrl & NAND_CLE)
+                writeb(cmd, host->cmd_va);
+        else
+                writeb(cmd, host->addr_va);
+}
+
+static int nomadik_nand_probe(struct platform_device *pdev)
+{
+        struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+        struct nomadik_nand_host *host;
+        struct mtd_info *mtd;
+        struct nand_chip *nand;
+        struct resource *res;
+        int ret = 0;
+
+        /* Allocate memory for the device structure (and zero it) */
+        host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
+        if (!host) {
+                dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+                return -ENOMEM;
+        }
+
+        /* Call the client's init function, if any */
+        if (pdata->init)
+                ret = pdata->init();
+        if (ret < 0) {
+                dev_err(&pdev->dev, "Init function failed\n");
+                goto err;
+        }
+
+        /* ioremap three regions */
+        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+        if (!res) {
+                ret = -EIO;
+                goto err_unmap;
+        }
+        host->addr_va = ioremap(res->start, res->end - res->start + 1);
+
+        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+        if (!res) {
+                ret = -EIO;
+                goto err_unmap;
+        }
+        host->data_va = ioremap(res->start, res->end - res->start + 1);
+
+        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+        if (!res) {
+                ret = -EIO;
+                goto err_unmap;
+        }
+        host->cmd_va = ioremap(res->start, res->end - res->start + 1);
+
+        if (!host->addr_va || !host->data_va || !host->cmd_va) {
+                ret = -ENOMEM;
+                goto err_unmap;
+        }
+
+        /* Link all private pointers */
+        mtd = &host->mtd;
+        nand = &host->nand;
+        mtd->priv = nand;
+        nand->priv = host;
+
+        host->mtd.owner = THIS_MODULE;
+        nand->IO_ADDR_R = host->data_va;
+        nand->IO_ADDR_W = host->data_va;
+        nand->cmd_ctrl = nomadik_cmd_ctrl;
+
+        /*
+         * This stanza declares ECC_HW but uses soft routines. It's because
+         * HW claims to make the calculation but not the correction. However,
+         * I haven't managed to get the desired data out of it until now.
+         */
+        nand->ecc.mode = NAND_ECC_SOFT;
+        nand->ecc.layout = &nomadik_ecc_layout;
+        nand->ecc.hwctl = nomadik_ecc_control;
+        nand->ecc.size = 512;
+        nand->ecc.bytes = 3;
+
+        nand->options = pdata->options;
+
+        /*
+         * Scan to find existance of the device
+         */
+        if (nand_scan(&host->mtd, 1)) {
+                ret = -ENXIO;
+                goto err_unmap;
+        }
+
+#ifdef CONFIG_MTD_PARTITIONS
+        add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
+#else
+        pr_info("Registering %s as whole device\n", mtd->name);
+        add_mtd_device(mtd);
+#endif
+
+        platform_set_drvdata(pdev, host);
+        return 0;
+
+ err_unmap:
+        if (host->cmd_va)
+                iounmap(host->cmd_va);
+        if (host->data_va)
+                iounmap(host->data_va);
+        if (host->addr_va)
+                iounmap(host->addr_va);
+ err:
+        kfree(host);
+        return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int nomadik_nand_remove(struct platform_device *pdev)
+{
+        struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+        struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+
+        if (pdata->exit)
+                pdata->exit();
+
+        if (host) {
+                iounmap(host->cmd_va);
+                iounmap(host->data_va);
+                iounmap(host->addr_va);
+                kfree(host);
+        }
+        return 0;
+}
+
+static int nomadik_nand_suspend(struct device *dev)
+{
+        struct nomadik_nand_host *host = dev_get_drvdata(dev);
+        int ret = 0;
+        if (host)
+                ret = host->mtd.suspend(&host->mtd);
+        return ret;
+}
+
+static int nomadik_nand_resume(struct device *dev)
+{
+        struct nomadik_nand_host *host = dev_get_drvdata(dev);
+        if (host)
+                host->mtd.resume(&host->mtd);
+        return 0;
+}
+
+static struct dev_pm_ops nomadik_nand_pm_ops = {
+        .suspend = nomadik_nand_suspend,
+        .resume = nomadik_nand_resume,
+};
+
+static struct platform_driver nomadik_nand_driver = {
+        .probe = nomadik_nand_probe,
+        .remove = nomadik_nand_remove,
+        .driver = {
+                .owner = THIS_MODULE,
+                .name = "nomadik_nand",
+                .pm = &nomadik_nand_pm_ops,
+        },
+};
+
+static int __init nand_nomadik_init(void)
+{
+        pr_info("Nomadik NAND driver\n");
+        return platform_driver_register(&nomadik_nand_driver);
+}
+
+static void __exit nand_nomadik_exit(void)
+{
+        platform_driver_unregister(&nomadik_nand_driver);
+}
+
+module_init(nand_nomadik_init);
+module_exit(nand_nomadik_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
+MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ebd07e95b814..090ab87086b5 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -18,8 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
-
+#include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 
@@ -112,6 +111,27 @@
 static const char *part_probes[] = { "cmdlinepart", NULL };
 #endif
 
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
+static int use_prefetch = 1;
+
+/* "modprobe ... use_prefetch=0" etc */
+module_param(use_prefetch, bool, 0);
+MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+static int use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+#else
+const int use_dma;
+#endif
+#else
+const int use_prefetch;
+const int use_dma;
+#endif
+
 struct omap_nand_info {
         struct nand_hw_control          controller;
         struct omap_nand_platform_data  *pdata;
@@ -124,6 +144,9 @@ struct omap_nand_info {
         unsigned long                   phys_base;
         void __iomem                    *gpmc_cs_baseaddr;
         void __iomem                    *gpmc_baseaddr;
+        void __iomem                    *nand_pref_fifo_add;
+        struct completion               comp;
+        int                             dma_ch;
 };
 
 /**
@@ -189,6 +212,38 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 }
 
 /**
+ * omap_read_buf8 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
+{
+        struct nand_chip *nand = mtd->priv;
+
+        ioread8_rep(nand->IO_ADDR_R, buf, len);
+}
+
+/**
+ * omap_write_buf8 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
+{
+        struct omap_nand_info *info = container_of(mtd,
+                                                struct omap_nand_info, mtd);
+        u_char *p = (u_char *)buf;
+
+        while (len--) {
+                iowrite8(*p++, info->nand.IO_ADDR_W);
+                while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
+                                                GPMC_STATUS) & GPMC_BUF_FULL));
+        }
+}
+
+/**
  * omap_read_buf16 - read data from NAND controller into buffer
  * @mtd: MTD device structure
  * @buf: buffer to store date
@@ -198,7 +253,7 @@ static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 {
         struct nand_chip *nand = mtd->priv;
 
-        __raw_readsw(nand->IO_ADDR_R, buf, len / 2);
+        ioread16_rep(nand->IO_ADDR_R, buf, len / 2);
 }
 
 /**
@@ -217,13 +272,242 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
         len >>= 1;
 
         while (len--) {
-                writew(*p++, info->nand.IO_ADDR_W);
+                iowrite16(*p++, info->nand.IO_ADDR_W);
 
                 while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
                                                 GPMC_STATUS) & GPMC_BUF_FULL))
                         ;
         }
 }
+
+/**
+ * omap_read_buf_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+        struct omap_nand_info *info = container_of(mtd,
+                                                struct omap_nand_info, mtd);
+        uint32_t pfpw_status = 0, r_count = 0;
+        int ret = 0;
+        u32 *p = (u32 *)buf;
+
+        /* take care of subpage reads */
+        for (; len % 4 != 0; ) {
+                *buf++ = __raw_readb(info->nand.IO_ADDR_R);
+                len--;
+        }
+        p = (u32 *) buf;
+
+        /* configure and start prefetch transfer */
+        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+        if (ret) {
+                /* PFPW engine is busy, use cpu copy method */
+                if (info->nand.options & NAND_BUSWIDTH_16)
+                        omap_read_buf16(mtd, buf, len);
+                else
+                        omap_read_buf8(mtd, buf, len);
+        } else {
+                do {
+                        pfpw_status = gpmc_prefetch_status();
+                        r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
+                        ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+                        p += r_count;
+                        len -= r_count << 2;
+                } while (len);
+
+                /* disable and stop the PFPW engine */
+                gpmc_prefetch_reset();
+        }
+}
+
+/**
+ * omap_write_buf_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_pref(struct mtd_info *mtd,
+                                        const u_char *buf, int len)
+{
+        struct omap_nand_info *info = container_of(mtd,
+                                                struct omap_nand_info, mtd);
+        uint32_t pfpw_status = 0, w_count = 0;
+        int i = 0, ret = 0;
+        u16 *p = (u16 *) buf;
+
+        /* take care of subpage writes */
+        if (len % 2 != 0) {
+                writeb(*buf, info->nand.IO_ADDR_R);
+                p = (u16 *)(buf + 1);
+                len--;
+        }
+
+        /*  configure and start prefetch transfer */
+        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+        if (ret) {
+                /* PFPW engine is busy, use cpu copy method */
+                if (info->nand.options & NAND_BUSWIDTH_16)
+                        omap_write_buf16(mtd, buf, len);
+                else
+                        omap_write_buf8(mtd, buf, len);
+        } else {
+                pfpw_status = gpmc_prefetch_status();
+                while (pfpw_status & 0x3FFF) {
+                        w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+                        for (i = 0; (i < w_count) && len; i++, len -= 2)
+                                iowrite16(*p++, info->nand_pref_fifo_add);
+                        pfpw_status = gpmc_prefetch_status();
+                }
+
+                /* disable and stop the PFPW engine */
+                gpmc_prefetch_reset();
+        }
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+/*
+ * omap_nand_dma_cb: callback on the completion of dma transfer
+ * @lch: logical channel
+ * @ch_satuts: channel status
+ * @data: pointer to completion data structure
+ */
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
+{
+        complete((struct completion *) data);
+}
+
+/*
+ * omap_nand_dma_transfer: configer and start dma transfer
+ * @mtd: MTD device structure
+ * @addr: virtual address in RAM of source/destination
+ * @len: number of data bytes to be transferred
+ * @is_write: flag for read/write operation
+ */
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+                                        unsigned int len, int is_write)
+{
+        struct omap_nand_info *info = container_of(mtd,
+                                        struct omap_nand_info, mtd);
+        uint32_t prefetch_status = 0;
+        enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
+                                                        DMA_FROM_DEVICE;
+        dma_addr_t dma_addr;
+        int ret;
+
+        /* The fifo depth is 64 bytes. We have a sync at each frame and frame
+         * length is 64 bytes.
+         */
+        int buf_len = len >> 6;
+
+        if (addr >= high_memory) {
+                struct page *p1;
+
+                if (((size_t)addr & PAGE_MASK) !=
+                        ((size_t)(addr + len - 1) & PAGE_MASK))
+                        goto out_copy;
+                p1 = vmalloc_to_page(addr);
+                if (!p1)
+                        goto out_copy;
+                addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
+        }
+
+        dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
+        if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
+                dev_err(&info->pdev->dev,
+                        "Couldn't DMA map a %d byte buffer\n", len);
+                goto out_copy;
+        }
+
+        if (is_write) {
+            omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+                                                info->phys_base, 0, 0);
+            omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+                                                        dma_addr, 0, 0);
+            omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+                                        0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+                                        OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC);
+        } else {
+            omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+                                                info->phys_base, 0, 0);
+            omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+                                                        dma_addr, 0, 0);
+            omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+                                        0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+                                        OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
+        }
+        /*  configure and start prefetch transfer */
+        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+        if (ret)
+                /* PFPW engine is busy, use cpu copy methode */
+                goto out_copy;
+
+        init_completion(&info->comp);
+
+        omap_start_dma(info->dma_ch);
+
+        /* setup and start DMA using dma_addr */
+        wait_for_completion(&info->comp);
+
+        while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
+                ;
+        /* disable and stop the PFPW engine */
+        gpmc_prefetch_reset();
+
+        dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
+        return 0;
+
+out_copy:
+        if (info->nand.options & NAND_BUSWIDTH_16)
+                is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
+                        : omap_write_buf16(mtd, (u_char *) addr, len);
+        else
+                is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len)
+                        : omap_write_buf8(mtd, (u_char *) addr, len);
+        return 0;
+}
+#else
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+                                        unsigned int len, int is_write)
+{
+        return 0;
+}
+#endif
+
+/**
+ * omap_read_buf_dma_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+        if (len <= mtd->oobsize)
+                omap_read_buf_pref(mtd, buf, len);
+        else
+                /* start transfer in DMA mode */
+                omap_nand_dma_transfer(mtd, buf, len, 0x0);
+}
+
+/**
+ * omap_write_buf_dma_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_dma_pref(struct mtd_info *mtd,
+                                        const u_char *buf, int len)
+{
+        if (len <= mtd->oobsize)
+                omap_write_buf_pref(mtd, buf, len);
+        else
+                /* start transfer in DMA mode */
+                omap_nand_dma_transfer(mtd, buf, len, 0x1);
+}
+
 /**
  * omap_verify_buf - Verify chip data against buffer
  * @mtd: MTD device structure
@@ -658,17 +942,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
                 err = -ENOMEM;
                 goto out_release_mem_region;
         }
+
         info->nand.controller = &info->controller;
 
         info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
         info->nand.cmd_ctrl  = omap_hwcontrol;
 
-        /* REVISIT:  only supports 16-bit NAND flash */
-
-        info->nand.read_buf   = omap_read_buf16;
-        info->nand.write_buf  = omap_write_buf16;
-        info->nand.verify_buf = omap_verify_buf;
-
         /*
          * If RDY/BSY line is connected to OMAP then use the omap ready
          * funcrtion and the generic nand_wait function which reads the status
@@ -689,6 +968,40 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
                                                                 == 0x1000)
                 info->nand.options  |= NAND_BUSWIDTH_16;
 
+        if (use_prefetch) {
+                /* copy the virtual address of nand base for fifo access */
+                info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
+
+                info->nand.read_buf   = omap_read_buf_pref;
+                info->nand.write_buf  = omap_write_buf_pref;
+                if (use_dma) {
+                        err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
+                                omap_nand_dma_cb, &info->comp, &info->dma_ch);
+                        if (err < 0) {
+                                info->dma_ch = -1;
+                                printk(KERN_WARNING "DMA request failed."
+                                        " Non-dma data transfer mode\n");
+                        } else {
+                                omap_set_dma_dest_burst_mode(info->dma_ch,
+                                                OMAP_DMA_DATA_BURST_16);
+                                omap_set_dma_src_burst_mode(info->dma_ch,
+                                                OMAP_DMA_DATA_BURST_16);
+
+                                info->nand.read_buf   = omap_read_buf_dma_pref;
+                                info->nand.write_buf  = omap_write_buf_dma_pref;
+                        }
+                }
+        } else {
+                if (info->nand.options & NAND_BUSWIDTH_16) {
+                        info->nand.read_buf   = omap_read_buf16;
+                        info->nand.write_buf  = omap_write_buf16;
+                } else {
+                        info->nand.read_buf   = omap_read_buf8;
+                        info->nand.write_buf  = omap_write_buf8;
+                }
+        }
+        info->nand.verify_buf = omap_verify_buf;
+
 #ifdef CONFIG_MTD_NAND_OMAP_HWECC
         info->nand.ecc.bytes            = 3;
         info->nand.ecc.size             = 512;
@@ -744,9 +1057,12 @@ static int omap_nand_remove(struct platform_device *pdev)
         struct omap_nand_info *info = mtd->priv;
 
         platform_set_drvdata(pdev, NULL);
+        if (use_dma)
+                omap_free_dma(info->dma_ch);
+
         /* Release NAND device, its internal structures and partitions */
         nand_release(&info->mtd);
-        iounmap(info->nand.IO_ADDR_R);
+        iounmap(info->nand_pref_fifo_add);
         kfree(&info->mtd);
         return 0;
 }
@@ -763,6 +1079,15 @@ static struct platform_driver omap_nand_driver = {
 static int __init omap_nand_init(void)
 {
         printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+
+        /* This check is required if driver is being
+         * loaded run time as a module
+         */
+        if ((1 == use_dma) && (0 == use_prefetch)) {
+                printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
+                                "without use_prefetch'. Prefetch will not be"
+                                " used in either mode (mpu or dma)\n");
+        }
         return platform_driver_register(&omap_nand_driver);
 }
 
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 0d9d4bc9c762..f59c07427af3 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -171,7 +171,6 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver orion_nand_driver = {
-        .probe          = orion_nand_probe,
         .remove         = __devexit_p(orion_nand_remove),
         .driver         = {
                 .name   = "orion_nand",
@@ -181,7 +180,7 @@ static struct platform_driver orion_nand_driver = {
 
 static int __init orion_nand_init(void)
 {
-        return platform_driver_register(&orion_nand_driver);
+        return platform_driver_probe(&orion_nand_driver, orion_nand_probe);
 }
 
 static void __exit orion_nand_exit(void)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 30a8ce6d3e69..6ea520ae2410 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -102,6 +102,7 @@ enum {
         ERR_SENDCMD     = -2,
         ERR_DBERR       = -3,
         ERR_BBERR       = -4,
+        ERR_SBERR       = -5,
 };
 
 enum {
@@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 
         status = nand_readl(info, NDSR);
 
-        if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
+        if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) {
                 if (status & NDSR_DBERR)
                         info->retcode = ERR_DBERR;
+                else if (status & NDSR_SBERR)
+                        info->retcode = ERR_SBERR;
 
-                disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
+                disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
 
                 if (info->use_dma) {
                         info->state = STATE_DMA_READING;
@@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
                 if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
                         break;
 
-                pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+                pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
 
                 /* We only are OOB, so if the data has error, does not matter */
                 if (info->retcode == ERR_DBERR)
@@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
                 if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
                         break;
 
-                pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+                pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
 
                 if (info->retcode == ERR_DBERR) {
                         /* for blank page (all 0xff), HW will calculate its ECC as
@@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
          * consider it as a ecc error which will tell the caller the
          * read fail We have distinguish all the errors, but the
          * nand_read_ecc only check this function return value
+         *
+         * Corrected (single-bit) errors must also be noted.
          */
-        if (info->retcode != ERR_NONE)
+        if (info->retcode == ERR_SBERR)
+                return 1;
+        else if (info->retcode != ERR_NONE)
                 return -1;
 
         return 0;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 2bc896623e2d..02bef21f2e4b 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -329,7 +329,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 }
 
 static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-                                uint8_t *buf)
+                                uint8_t *buf, int page)
 {
         int i, eccsize = chip->ecc.size;
         int eccbytes = chip->ecc.bytes;
@@ -857,7 +857,6 @@ static int __exit flctl_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver flctl_driver = {
-        .probe          = flctl_probe,
         .remove         = flctl_remove,
         .driver = {
                 .name   = "sh_flctl",
@@ -867,7 +866,7 @@ static struct platform_driver flctl_driver = {
 
 static int __init flctl_nand_init(void)
 {
-        return platform_driver_register(&flctl_driver);
+        return platform_driver_probe(&flctl_driver, flctl_probe);
 }
 
 static void __exit flctl_nand_cleanup(void)
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index daa6a4c3b8ce..92c73344a669 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -301,6 +301,21 @@ static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
         return 0;
 }
 
+static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+                unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+        int r0, r1;
+
+        /* assume ecc.size = 512 and ecc.bytes = 6 */
+        r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+        if (r0 < 0)
+                return r0;
+        r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256);
+        if (r1 < 0)
+                return r1;
+        return r0 + r1;
+}
+
 static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
 {
         struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
@@ -424,7 +439,7 @@ static int tmio_probe(struct platform_device *dev)
         nand_chip->ecc.bytes = 6;
         nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
         nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
-        nand_chip->ecc.correct = nand_correct_data;
+        nand_chip->ecc.correct = tmio_nand_correct_data;
 
         if (data)
                 nand_chip->badblock_pattern = data->badblock_pattern;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 488088eff2ca..73af8324d0d0 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -189,18 +189,43 @@ static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
                                    uint8_t *ecc_code)
 {
         struct platform_device *dev = mtd_to_platdev(mtd);
+        struct nand_chip *chip = mtd->priv;
+        int eccbytes;
         u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
 
         mcr &= ~TXX9_NDFMCR_ECC_ALL;
         txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
         txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR);
-        ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
-        ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
-        ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+        for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) {
+                ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+                ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+                ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+                ecc_code += 3;
+        }
         txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
         return 0;
 }
 
+static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf,
+                unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+        struct nand_chip *chip = mtd->priv;
+        int eccsize;
+        int corrected = 0;
+        int stat;
+
+        for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
+                stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+                if (stat < 0)
+                        return stat;
+                corrected += stat;
+                buf += 256;
+                read_ecc += 3;
+                calc_ecc += 3;
+        }
+        return corrected;
+}
+
 static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
 {
         struct platform_device *dev = mtd_to_platdev(mtd);
@@ -244,6 +269,22 @@ static void txx9ndfmc_initialize(struct platform_device *dev)
 #define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
         DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
 
+static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+{
+        struct nand_chip *chip = mtd->priv;
+        int ret;
+
+        ret = nand_scan_ident(mtd, 1);
+        if (!ret) {
+                if (mtd->writesize >= 512) {
+                        chip->ecc.size = mtd->writesize;
+                        chip->ecc.bytes = 3 * (mtd->writesize / 256);
+                }
+                ret = nand_scan_tail(mtd);
+        }
+        return ret;
+}
+
 static int __init txx9ndfmc_probe(struct platform_device *dev)
 {
         struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
@@ -321,9 +362,10 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
                 chip->cmd_ctrl = txx9ndfmc_cmd_ctrl;
                 chip->dev_ready = txx9ndfmc_dev_ready;
                 chip->ecc.calculate = txx9ndfmc_calculate_ecc;
-                chip->ecc.correct = nand_correct_data;
+                chip->ecc.correct = txx9ndfmc_correct_data;
                 chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
                 chip->ecc.mode = NAND_ECC_HW;
+                /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
                 chip->ecc.size = 256;
                 chip->ecc.bytes = 3;
                 chip->chip_delay = 100;
@@ -349,7 +391,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
                 if (plat->wide_mask & (1 << i))
                         chip->options |= NAND_BUSWIDTH_16;
 
-                if (nand_scan(mtd, 1)) {
+                if (txx9ndfmc_nand_scan(mtd)) {
                         kfree(txx9_priv->mtdname);
                         kfree(txx9_priv);
                         continue;
diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/w90p910_nand.c
new file mode 100644
index 000000000000..7680e731348a
--- /dev/null
+++ b/drivers/mtd/nand/w90p910_nand.c
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#define REG_FMICSR      0x00
+#define REG_SMCSR       0xa0
+#define REG_SMISR       0xac
+#define REG_SMCMD       0xb0
+#define REG_SMADDR      0xb4
+#define REG_SMDATA      0xb8
+
+#define RESET_FMI       0x01
+#define NAND_EN         0x08
+#define READYBUSY       (0x01 << 18)
+
+#define SWRST           0x01
+#define PSIZE           (0x01 << 3)
+#define DMARWEN         (0x03 << 1)
+#define BUSWID          (0x01 << 4)
+#define ECC4EN          (0x01 << 5)
+#define WP              (0x01 << 24)
+#define NANDCS          (0x01 << 25)
+#define ENDADDR         (0x01 << 31)
+
+#define read_data_reg(dev)              \
+        __raw_readl((dev)->reg + REG_SMDATA)
+
+#define write_data_reg(dev, val)        \
+        __raw_writel((val), (dev)->reg + REG_SMDATA)
+
+#define write_cmd_reg(dev, val)         \
+        __raw_writel((val), (dev)->reg + REG_SMCMD)
+
+#define write_addr_reg(dev, val)        \
+        __raw_writel((val), (dev)->reg + REG_SMADDR)
+
+struct w90p910_nand {
+        struct mtd_info mtd;
+        struct nand_chip chip;
+        void __iomem *reg;
+        struct clk *clk;
+        spinlock_t lock;
+};
+
+static const struct mtd_partition partitions[] = {
+        {
+         .name = "NAND FS 0",
+         .offset = 0,
+         .size = 8 * 1024 * 1024
+        },
+        {
+         .name = "NAND FS 1",
+         .offset = MTDPART_OFS_APPEND,
+         .size = MTDPART_SIZ_FULL
+        }
+};
+
+static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd)
+{
+        unsigned char ret;
+        struct w90p910_nand *nand;
+
+        nand = container_of(mtd, struct w90p910_nand, mtd);
+
+        ret = (unsigned char)read_data_reg(nand);
+
+        return ret;
+}
+
+static void w90p910_nand_read_buf(struct mtd_info *mtd,
+                                                unsigned char *buf, int len)
+{
+        int i;
+        struct w90p910_nand *nand;
+
+        nand = container_of(mtd, struct w90p910_nand, mtd);
+
+        for (i = 0; i < len; i++)
+                buf[i] = (unsigned char)read_data_reg(nand);
+}
+
+static void w90p910_nand_write_buf(struct mtd_info *mtd,
+                                        const unsigned char *buf, int len)
+{
+        int i;
+        struct w90p910_nand *nand;
+
+        nand = container_of(mtd, struct w90p910_nand, mtd);
+
+        for (i = 0; i < len; i++)
+                write_data_reg(nand, buf[i]);
+}
+
+static int w90p910_verify_buf(struct mtd_info *mtd,
+                                        const unsigned char *buf, int len)
+{
+        int i;
+        struct w90p910_nand *nand;
+
+        nand = container_of(mtd, struct w90p910_nand, mtd);
+
+        for (i = 0; i < len; i++) {
+                if (buf[i] != (unsigned char)read_data_reg(nand))
+                        return -EFAULT;
+        }
+
+        return 0;
+}
+
+static int w90p910_check_rb(struct w90p910_nand *nand)
+{
+        unsigned int val;
+        spin_lock(&nand->lock);
+        val = __raw_readl(REG_SMISR);
+        val &= READYBUSY;
+        spin_unlock(&nand->lock);
+
+        return val;
+}
+
+static int w90p910_nand_devready(struct mtd_info *mtd)
+{
+        struct w90p910_nand *nand;
+        int ready;
+
+        nand = container_of(mtd, struct w90p910_nand, mtd);
+
+        ready = (w90p910_check_rb(nand)) ? 1 : 0;
+        return ready;
+}
+
+static void w90p910_nand_command_lp(struct mtd_info *mtd,
+                        unsigned int command, int column, int page_addr)
+{
+        register struct nand_chip *chip = mtd->priv;
+        struct w90p910_nand *nand;
+
+        nand = container_of(mtd, struct w90p910_nand, mtd);
+
+        if (command == NAND_CMD_READOOB) {
+                column += mtd->writesize;
+                command = NAND_CMD_READ0;
+        }
+
+        write_cmd_reg(nand, command & 0xff);
+
+        if (column != -1 || page_addr != -1) {
+
+                if (column != -1) {
+                        if (chip->options & NAND_BUSWIDTH_16)
+                                column >>= 1;
+                        write_addr_reg(nand, column);
+                        write_addr_reg(nand, column >> 8 | ENDADDR);
+                }
+                if (page_addr != -1) {
+                        write_addr_reg(nand, page_addr);
+
+                        if (chip->chipsize > (128 << 20)) {
+                                write_addr_reg(nand, page_addr >> 8);
+                                write_addr_reg(nand, page_addr >> 16 | ENDADDR);
+                        } else {
+                                write_addr_reg(nand, page_addr >> 8 | ENDADDR);
+                        }
+                }
+        }
+
+        switch (command) {
+        case NAND_CMD_CACHEDPROG:
+        case NAND_CMD_PAGEPROG:
+        case NAND_CMD_ERASE1:
+        case NAND_CMD_ERASE2:
+        case NAND_CMD_SEQIN:
+        case NAND_CMD_RNDIN:
+        case NAND_CMD_STATUS:
+        case NAND_CMD_DEPLETE1:
+                return;
+
+        case NAND_CMD_STATUS_ERROR:
+        case NAND_CMD_STATUS_ERROR0:
+        case NAND_CMD_STATUS_ERROR1:
+        case NAND_CMD_STATUS_ERROR2:
+        case NAND_CMD_STATUS_ERROR3:
+                udelay(chip->chip_delay);
+                return;
+
+        case NAND_CMD_RESET:
+                if (chip->dev_ready)
+                        break;
+                udelay(chip->chip_delay);
+
+                write_cmd_reg(nand, NAND_CMD_STATUS);
+                write_cmd_reg(nand, command);
+
+                while (!w90p910_check_rb(nand))
+                        ;
+
+                return;
+
+        case NAND_CMD_RNDOUT:
+                write_cmd_reg(nand, NAND_CMD_RNDOUTSTART);
+                return;
+
+        case NAND_CMD_READ0:
+
+                write_cmd_reg(nand, NAND_CMD_READSTART);
+        default:
+
+                if (!chip->dev_ready) {
+                        udelay(chip->chip_delay);
+                        return;
+                }
+        }
+
+        /* Apply this short delay always to ensure that we do wait tWB in
+         * any case on any machine. */
+        ndelay(100);
+
+        while (!chip->dev_ready(mtd))
+                ;
+}
+
+
+static void w90p910_nand_enable(struct w90p910_nand *nand)
+{
+        unsigned int val;
+        spin_lock(&nand->lock);
+        __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR));
+
+        val = __raw_readl(nand->reg + REG_FMICSR);
+
+        if (!(val & NAND_EN))
+                __raw_writel(val | NAND_EN, REG_FMICSR);
+
+        val = __raw_readl(nand->reg + REG_SMCSR);
+
+        val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS);
+        val |= WP;
+
+        __raw_writel(val, nand->reg + REG_SMCSR);
+
+        spin_unlock(&nand->lock);
+}
+
+static int __devinit w90p910_nand_probe(struct platform_device *pdev)
+{
+        struct w90p910_nand *w90p910_nand;
+        struct nand_chip *chip;
+        int retval;
+        struct resource *res;
+
+        retval = 0;
+
+        w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL);
+        if (!w90p910_nand)
+                return -ENOMEM;
+        chip = &(w90p910_nand->chip);
+
+        w90p910_nand->mtd.priv  = chip;
+        w90p910_nand->mtd.owner = THIS_MODULE;
+        spin_lock_init(&w90p910_nand->lock);
+
+        w90p910_nand->clk = clk_get(&pdev->dev, NULL);
+        if (IS_ERR(w90p910_nand->clk)) {
+                retval = -ENOENT;
+                goto fail1;
+        }
+        clk_enable(w90p910_nand->clk);
+
+        chip->cmdfunc           = w90p910_nand_command_lp;
+        chip->dev_ready         = w90p910_nand_devready;
+        chip->read_byte         = w90p910_nand_read_byte;
+        chip->write_buf         = w90p910_nand_write_buf;
+        chip->read_buf          = w90p910_nand_read_buf;
+        chip->verify_buf        = w90p910_verify_buf;
+        chip->chip_delay        = 50;
+        chip->options           = 0;
+        chip->ecc.mode          = NAND_ECC_SOFT;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!res) {
+                retval = -ENXIO;
+                goto fail1;
+        }
+
+        if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+                retval = -EBUSY;
+                goto fail1;
+        }
+
+        w90p910_nand->reg = ioremap(res->start, resource_size(res));
+        if (!w90p910_nand->reg) {
+                retval = -ENOMEM;
+                goto fail2;
+        }
+
+        w90p910_nand_enable(w90p910_nand);
+
+        if (nand_scan(&(w90p910_nand->mtd), 1)) {
+                retval = -ENXIO;
+                goto fail3;
+        }
+
+        add_mtd_partitions(&(w90p910_nand->mtd), partitions,
+                                                ARRAY_SIZE(partitions));
+
+        platform_set_drvdata(pdev, w90p910_nand);
+
+        return retval;
+
+fail3:  iounmap(w90p910_nand->reg);
+fail2:  release_mem_region(res->start, resource_size(res));
+fail1:  kfree(w90p910_nand);
+        return retval;
+}
+
+static int __devexit w90p910_nand_remove(struct platform_device *pdev)
+{
+        struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev);
+        struct resource *res;
+
+        iounmap(w90p910_nand->reg);
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        release_mem_region(res->start, resource_size(res));
+
+        clk_disable(w90p910_nand->clk);
+        clk_put(w90p910_nand->clk);
+
+        kfree(w90p910_nand);
+
+        platform_set_drvdata(pdev, NULL);
+
+        return 0;
+}
+
+static struct platform_driver w90p910_nand_driver = {
+        .probe          = w90p910_nand_probe,
+        .remove         = __devexit_p(w90p910_nand_remove),
+        .driver         = {
+                .name   = "w90p910-fmi",
+                .owner  = THIS_MODULE,
+        },
+};
+
+static int __init w90p910_nand_init(void)
+{
+        return platform_driver_register(&w90p910_nand_driver);
+}
+
+static void __exit w90p910_nand_exit(void)
+{
+        platform_driver_unregister(&w90p910_nand_driver);
+}
+
+module_init(w90p910_nand_init);
+module_exit(w90p910_nand_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 nand driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-fmi");
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 3e164f0c9295..62d6a78c4eee 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -46,21 +46,12 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
                 const u32 *reg;
                 int len;
 
-                /* check if this is a partition node */
-                partname = of_get_property(pp, "name", &len);
-                if (strcmp(partname, "partition") != 0) {
+                reg = of_get_property(pp, "reg", &len);
+                if (!reg) {
                         nr_parts--;
                         continue;
                 }
 
-                reg = of_get_property(pp, "reg", &len);
-                if (!reg || (len != 2 * sizeof(u32))) {
-                        of_node_put(pp);
-                        dev_err(dev, "Invalid 'reg' on %s\n", node->full_name);
-                        kfree(*pparts);
-                        *pparts = NULL;
-                        return -EINVAL;
-                }
                 (*pparts)[i].offset = reg[0];
                 (*pparts)[i].size = reg[1];
 
@@ -75,6 +66,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
                 i++;
         }
 
+        if (!i) {
+                of_node_put(pp);
+                dev_err(dev, "No valid partition found on %s\n", node->full_name);
+                kfree(*pparts);
+                *pparts = NULL;
+                return -EINVAL;
+        }
+
         return nr_parts;
 }
 EXPORT_SYMBOL(of_mtd_parse_partitions);
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 79fa79e8f8de..a38f580c2bb3 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -5,6 +5,7 @@
 menuconfig MTD_ONENAND
         tristate "OneNAND Device Support"
         depends on MTD
+        select MTD_PARTITIONS
         help
           This enables support for accessing all type of OneNAND flash
           devices. For further information see
@@ -23,7 +24,6 @@ config MTD_ONENAND_VERIFY_WRITE
 
 config MTD_ONENAND_GENERIC
         tristate "OneNAND Flash device via platform device driver"
-        depends on ARM
         help
           Support for OneNAND flash via platform device driver.
 
@@ -66,7 +66,6 @@ config MTD_ONENAND_2X_PROGRAM
 
 config MTD_ONENAND_SIM
         tristate "OneNAND simulator support"
-        depends on MTD_PARTITIONS
         help
           The simulator may simulate various OneNAND flash chips for the
           OneNAND MTD layer.
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3a496c33fb52..e78914938c5c 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -19,12 +19,16 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
-
 #include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#define DRIVER_NAME     "onenand"
 
+/*
+ * Note: Driver name and platform data format have been updated!
+ *
+ * This version of the driver is named "onenand-flash" and takes struct
+ * onenand_platform_data as platform data. The old ARM-specific version
+ * with the name "onenand" used to take struct flash_platform_data.
+ */
+#define DRIVER_NAME     "onenand-flash"
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL,  };
@@ -39,16 +43,16 @@ struct onenand_info {
 static int __devinit generic_onenand_probe(struct platform_device *pdev)
 {
         struct onenand_info *info;
-        struct flash_platform_data *pdata = pdev->dev.platform_data;
+        struct onenand_platform_data *pdata = pdev->dev.platform_data;
         struct resource *res = pdev->resource;
-        unsigned long size = res->end - res->start + 1;
+        unsigned long size = resource_size(res);
         int err;
 
         info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
         if (!info)
                 return -ENOMEM;
 
-        if (!request_mem_region(res->start, size, pdev->dev.driver->name)) {
+        if (!request_mem_region(res->start, size, dev_name(&pdev->dev))) {
                 err = -EBUSY;
                 goto out_free_info;
         }
@@ -59,7 +63,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
                 goto out_release_mem_region;
         }
 
-        info->onenand.mmcontrol = pdata->mmcontrol;
+        info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0;
         info->onenand.irq = platform_get_irq(pdev, 0);
 
         info->mtd.name = dev_name(&pdev->dev);
@@ -75,7 +79,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
         err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
         if (err > 0)
                 add_mtd_partitions(&info->mtd, info->parts, err);
-        else if (err <= 0 && pdata->parts)
+        else if (err <= 0 && pdata && pdata->parts)
                 add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
         else
 #endif
@@ -99,7 +103,7 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev)
 {
         struct onenand_info *info = platform_get_drvdata(pdev);
         struct resource *res = pdev->resource;
-        unsigned long size = res->end - res->start + 1;
+        unsigned long size = resource_size(res);
 
         platform_set_drvdata(pdev, NULL);
 
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 6e829095ea9d..ff66e4330aa7 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1191,7 +1191,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
                         /*
                          * Chip boundary handling in DDP
                          * Now we issued chip 1 read and pointed chip 1
-                         * bufferam so we have to point chip 0 bufferam.
+                         * bufferram so we have to point chip 0 bufferram.
                          */
                         if (ONENAND_IS_DDP(this) &&
                             unlikely(from == (this->chipsize >> 1))) {
@@ -1867,8 +1867,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
                         ONENAND_SET_NEXT_BUFFERRAM(this);
 
                 /*
-                 * 2 PLANE, MLC, and Flex-OneNAND doesn't support
-                 * write-while-programe feature.
+                 * 2 PLANE, MLC, and Flex-OneNAND do not support
+                 * write-while-program feature.
                  */
                 if (!ONENAND_IS_2PLANE(this) && !first) {
                         ONENAND_SET_PREV_BUFFERRAM(this);
@@ -1879,7 +1879,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
                         onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
                         if (ret) {
                                 written -= prevlen;
-                                printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+                                printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
                                 break;
                         }
 
@@ -1905,7 +1905,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
                         /* In partial page write we don't update bufferram */
                         onenand_update_bufferram(mtd, to, !ret && !subpage);
                         if (ret) {
-                                printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+                                printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
                                 break;
                         }
 
@@ -2201,7 +2201,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
         /* Grab the lock and see if the device is available */
         onenand_get_device(mtd, FL_ERASING);
 
-        /* Loop throught the pages */
+        /* Loop through the blocks */
         instr->state = MTD_ERASING;
 
         while (len) {
@@ -2328,7 +2328,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
         if (bbm->bbt)
                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
-        /* We write two bytes, so we dont have to mess with 16 bit access */
+        /* We write two bytes, so we don't have to mess with 16-bit access */
         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
         /* FIXME : What to do when marking SLC block in partition
          *         with MLC erasesize? For now, it is not advisable to
@@ -2557,7 +2557,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
 
 #ifdef CONFIG_MTD_ONENAND_OTP
 
-/* Interal OTP operation */
+/* Internal OTP operation */
 typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
                 size_t *retlen, u_char *buf);
 
@@ -2921,7 +2921,7 @@ static void onenand_check_features(struct mtd_info *mtd)
                 this->options |= ONENAND_HAS_2PLANE;
 
         case ONENAND_DEVICE_DENSITY_2Gb:
-                /* 2Gb DDP don't have 2 plane */
+                /* 2Gb DDP does not have 2 plane */
                 if (!ONENAND_IS_DDP(this))
                         this->options |= ONENAND_HAS_2PLANE;
                 this->options |= ONENAND_HAS_UNLOCK_ALL;
@@ -3364,7 +3364,7 @@ static int onenand_probe(struct mtd_info *mtd)
         /* It's real page size */
         this->writesize = mtd->writesize;
 
-        /* REVIST: Multichip handling */
+        /* REVISIT: Multichip handling */
 
         if (FLEXONENAND(this))
                 flexonenand_get_size(mtd);
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index a18e8d2f2557..5553cd4eab20 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -512,7 +512,7 @@ static int __init mtd_oobtest_init(void)
                 goto out;
 
         addr0 = 0;
-        for (i = 0; bbt[i] && i < ebcnt; ++i)
+        for (i = 0; i < ebcnt && bbt[i]; ++i)
                 addr0 += mtd->erasesize;
 
         /* Attempt to write off end of OOB */
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 9648818b9e2c..103cac480fee 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -116,11 +116,11 @@ static int verify_eraseblock(int ebnum)
         loff_t addr = ebnum * mtd->erasesize;
 
         addr0 = 0;
-        for (i = 0; bbt[i] && i < ebcnt; ++i)
+        for (i = 0; i < ebcnt && bbt[i]; ++i)
                 addr0 += mtd->erasesize;
 
         addrn = mtd->size;
-        for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i)
+        for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
                 addrn -= mtd->erasesize;
 
         set_random_data(writebuf, mtd->erasesize);
@@ -219,11 +219,11 @@ static int crosstest(void)
         memset(pp1, 0, pgsize * 4);
 
         addr0 = 0;
-        for (i = 0; bbt[i] && i < ebcnt; ++i)
+        for (i = 0; i < ebcnt && bbt[i]; ++i)
                 addr0 += mtd->erasesize;
 
         addrn = mtd->size;
-        for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i)
+        for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
                 addrn -= mtd->erasesize;
 
         /* Read 2nd-to-last page to pp1 */
@@ -317,7 +317,7 @@ static int erasecrosstest(void)
 
         ebnum = 0;
         addr0 = 0;
-        for (i = 0; bbt[i] && i < ebcnt; ++i) {
+        for (i = 0; i < ebcnt && bbt[i]; ++i) {
                 addr0 += mtd->erasesize;
                 ebnum += 1;
         }
@@ -413,7 +413,7 @@ static int erasetest(void)
 
         ebnum = 0;
         addr0 = 0;
-        for (i = 0; bbt[i] && i < ebcnt; ++i) {
+        for (i = 0; i < ebcnt && bbt[i]; ++i) {
                 addr0 += mtd->erasesize;
                 ebnum += 1;
         }