OMAPDSS: nec-nl8048 panel: remove platform_enable/disable callbacks

The nec-nl8048 panel driver now manages the gpios required to configure the
panel. This was previously done in omap_dss_device's platform_enable/disable
callbacks defined in board files using this panel.

All the board files using this panel now pass the gpio information as platform
data via the panel_nec_nl8048_data struct, which is needed by the panel driver
to configure the gpios connected to the panel. Hence, the
platform_enable/disable ops can be safely removed now.

Signed-off-by: Archit Taneja <archit@ti.com>

1 files changed, 1 insertions, 11 deletions

diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index 3b85e2a70323..1e0097de3a23 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -133,18 +133,11 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
         if (r)
                 goto err0;
 
-        if (dssdev->platform_enable) {
-                r = dssdev->platform_enable(dssdev);
-                if (r)
-                        goto err1;
-        }
-
         if (gpio_is_valid(pd->res_gpio))
                 gpio_set_value_cansleep(pd->res_gpio, 1);
 
         return 0;
-err1:
-        omapdss_dpi_display_disable(dssdev);
+
 err0:
         return r;
 }
@@ -159,9 +152,6 @@ static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
         if (gpio_is_valid(pd->res_gpio))
                 gpio_set_value_cansleep(pd->res_gpio, 0);
 
-        if (dssdev->platform_disable)
-                dssdev->platform_disable(dssdev);
-
         omapdss_dpi_display_disable(dssdev);
 }