Merge tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big set of USB patches for 3.8-rc1.

  Lots of USB host driver cleanups in here, and a bit of a reorg of the
  EHCI driver to make it easier for the different EHCI platform drivers
  to all work together nicer, which was a reduction in overall code.  We
  also deleted some unused firmware files, and got rid of the very old
  file_storage usb gadget driver that had been broken for a long time.
  This means we ended up removing way more code than added, always a
  nice thing to see:
	 310 files changed, 3028 insertions(+), 10754 deletions(-)

  Other than that, the usual set of new device ids, driver fixes, gadget
  driver and controller updates and the like.

  All of these have been in the linux-next tree for a number of weeks.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (228 commits)
  USB: mark uas driver as BROKEN
  xhci: Add Lynx Point LP to list of Intel switchable hosts
  uwb: fix uwb_dev_unlock() missed at an error path in uwb_rc_cmd_async()
  USB: ftdi_sio: Add support for Newport AGILIS motor drivers
  MAINTAINERS: remove drivers/block/ub.c
  USB: chipidea: fix use after free bug
  ezusb: add dependency to USB
  usb: ftdi_sio: fixup BeagleBone A5+ quirk
  USB: cp210x: add Virtenio Preon32 device id
  usb: storage: remove redundant memset() in usb_probe_stor1()
  USB: option: blacklist network interface on Huawei E173
  USB: OHCI: workaround for hardware bug: retired TDs not added to the Done Queue
  USB: add new zte 3g-dongle's pid to option.c
  USB: opticon: switch to generic read implementation
  USB: opticon: refactor reab-urb processing
  USB: opticon: use usb-serial bulk-in urb
  USB: opticon: increase bulk-in size
  USB: opticon: use port as urb context
  USB: opticon: pass port to get_serial_info
  USB: opticon: make private data port specific
  ...

6 files changed, 241 insertions, 6 deletions

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 63c339b3e676..7eb73c561bd2 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -32,3 +32,15 @@ config MV_U3D_PHY
         help
           Enable this to support Marvell USB 3.0 phy controller for Marvell
           SoC.
+
+config USB_RCAR_PHY
+        tristate "Renesas R-Car USB phy support"
+        depends on USB || USB_GADGET
+        select USB_OTG_UTILS
+        help
+          Say Y here to add support for the Renesas R-Car USB phy driver.
+          This chip is typically used as USB phy for USB host, gadget.
+          This driver supports: R8A7779
+
+          To compile this driver as a module, choose M here: the
+          module will be called rcar-phy.
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b069f29f1225..1a579a860a03 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_OMAP_USB2)			+= omap-usb2.o
 obj-$(CONFIG_USB_ISP1301)               += isp1301.o
 obj-$(CONFIG_MV_U3D_PHY)                += mv_u3d_phy.o
 obj-$(CONFIG_USB_EHCI_TEGRA)    += tegra_usb_phy.o
+obj-$(CONFIG_USB_RCAR_PHY)              += rcar-phy.o
diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c
index 9f1c5d3c60ec..eaddbe3d4304 100644
--- a/drivers/usb/phy/mv_u3d_phy.c
+++ b/drivers/usb/phy/mv_u3d_phy.c
@@ -262,7 +262,7 @@ calstart:
         return 0;
 }
 
-static int __devinit mv_u3d_phy_probe(struct platform_device *pdev)
+static int mv_u3d_phy_probe(struct platform_device *pdev)
 {
         struct mv_u3d_phy *mv_u3d_phy;
         struct mv_usb_platform_data *pdata;
@@ -331,7 +331,7 @@ static int __exit mv_u3d_phy_remove(struct platform_device *pdev)
 
 static struct platform_driver mv_u3d_phy_driver = {
         .probe          = mv_u3d_phy_probe,
-        .remove         = __devexit_p(mv_u3d_phy_remove),
+        .remove         = mv_u3d_phy_remove,
         .driver         = {
                 .name   = "mv-u3d-phy",
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c
index 15ab3d6f2e8c..26ae8f49225c 100644
--- a/drivers/usb/phy/omap-usb2.c
+++ b/drivers/usb/phy/omap-usb2.c
@@ -141,7 +141,7 @@ static int omap_usb2_suspend(struct usb_phy *x, int suspend)
         return 0;
 }
 
-static int __devinit omap_usb2_probe(struct platform_device *pdev)
+static int omap_usb2_probe(struct platform_device *pdev)
 {
         struct omap_usb                 *phy;
         struct usb_otg                  *otg;
@@ -199,7 +199,7 @@ static int __devinit omap_usb2_probe(struct platform_device *pdev)
         return 0;
 }
 
-static int __devexit omap_usb2_remove(struct platform_device *pdev)
+static int omap_usb2_remove(struct platform_device *pdev)
 {
         struct omap_usb *phy = platform_get_drvdata(pdev);
 
@@ -254,7 +254,7 @@ MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
 
 static struct platform_driver omap_usb2_driver = {
         .probe          = omap_usb2_probe,
-        .remove         = __devexit_p(omap_usb2_remove),
+        .remove         = omap_usb2_remove,
         .driver         = {
                 .name   = "omap-usb2",
                 .owner  = THIS_MODULE,
diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/rcar-phy.c
new file mode 100644
index 000000000000..a35681b0c501
--- /dev/null
+++ b/drivers/usb/phy/rcar-phy.c
@@ -0,0 +1,220 @@
+/*
+ * Renesas R-Car USB phy driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+/* USBH common register */
+#define USBPCTRL0       0x0800
+#define USBPCTRL1       0x0804
+#define USBST           0x0808
+#define USBEH0          0x080C
+#define USBOH0          0x081C
+#define USBCTL0         0x0858
+#define EIIBC1          0x0094
+#define EIIBC2          0x009C
+
+/* USBPCTRL1 */
+#define PHY_RST         (1 << 2)
+#define PLL_ENB         (1 << 1)
+#define PHY_ENB         (1 << 0)
+
+/* USBST */
+#define ST_ACT          (1 << 31)
+#define ST_PLL          (1 << 30)
+
+struct rcar_usb_phy_priv {
+        struct usb_phy phy;
+        spinlock_t lock;
+
+        void __iomem *reg0;
+        void __iomem *reg1;
+        int counter;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy)
+
+
+/*
+ * USB initial/install operation.
+ *
+ * This function setup USB phy.
+ * The used value and setting order came from
+ * [USB :: Initial setting] on datasheet.
+ */
+static int rcar_usb_phy_init(struct usb_phy *phy)
+{
+        struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+        struct device *dev = phy->dev;
+        void __iomem *reg0 = priv->reg0;
+        void __iomem *reg1 = priv->reg1;
+        int i;
+        u32 val;
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        if (priv->counter++ == 0) {
+
+                /*
+                 * USB phy start-up
+                 */
+
+                /* (1) USB-PHY standby release */
+                iowrite32(PHY_ENB, (reg0 + USBPCTRL1));
+
+                /* (2) start USB-PHY internal PLL */
+                iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
+
+                /* (3) USB module status check */
+                for (i = 0; i < 1024; i++) {
+                        udelay(10);
+                        val = ioread32(reg0 + USBST);
+                        if (val == (ST_ACT | ST_PLL))
+                                break;
+                }
+
+                if (val != (ST_ACT | ST_PLL)) {
+                        dev_err(dev, "USB phy not ready\n");
+                        goto phy_init_end;
+                }
+
+                /* (4) USB-PHY reset clear */
+                iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
+
+                /* set platform specific port settings */
+                iowrite32(0x00000000, (reg0 + USBPCTRL0));
+
+                /*
+                 * EHCI IP internal buffer setting
+                 * EHCI IP internal buffer enable
+                 *
+                 * These are recommended value of a datasheet
+                 * see [USB :: EHCI internal buffer setting]
+                 */
+                iowrite32(0x00ff0040, (reg0 + EIIBC1));
+                iowrite32(0x00ff0040, (reg1 + EIIBC1));
+
+                iowrite32(0x00000001, (reg0 + EIIBC2));
+                iowrite32(0x00000001, (reg1 + EIIBC2));
+
+                /*
+                 * Bus alignment settings
+                 */
+
+                /* (1) EHCI bus alignment (little endian) */
+                iowrite32(0x00000000, (reg0 + USBEH0));
+
+                /* (1) OHCI bus alignment (little endian) */
+                iowrite32(0x00000000, (reg0 + USBOH0));
+        }
+
+phy_init_end:
+        spin_unlock_irqrestore(&priv->lock, flags);
+
+        return 0;
+}
+
+static void rcar_usb_phy_shutdown(struct usb_phy *phy)
+{
+        struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+        void __iomem *reg0 = priv->reg0;
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+
+        if (priv->counter-- == 1) { /* last user */
+                iowrite32(0x00000000, (reg0 + USBPCTRL0));
+                iowrite32(0x00000000, (reg0 + USBPCTRL1));
+        }
+
+        spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_usb_phy_probe(struct platform_device *pdev)
+{
+        struct rcar_usb_phy_priv *priv;
+        struct resource *res0, *res1;
+        struct device *dev = &pdev->dev;
+        void __iomem *reg0, *reg1;
+        int ret;
+
+        res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+        if (!res0 || !res1) {
+                dev_err(dev, "Not enough platform resources\n");
+                return -EINVAL;
+        }
+
+        /*
+         * CAUTION
+         *
+         * Because this phy address is also mapped under OHCI/EHCI address area,
+         * this driver can't use devm_request_and_ioremap(dev, res) here
+         */
+        reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0));
+        reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1));
+        if (!reg0 || !reg1) {
+                dev_err(dev, "ioremap error\n");
+                return -ENOMEM;
+        }
+
+        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+        if (!priv) {
+                dev_err(dev, "priv data allocation error\n");
+                return -ENOMEM;
+        }
+
+        priv->reg0              = reg0;
+        priv->reg1              = reg1;
+        priv->counter           = 0;
+        priv->phy.dev           = dev;
+        priv->phy.label         = dev_name(dev);
+        priv->phy.init          = rcar_usb_phy_init;
+        priv->phy.shutdown      = rcar_usb_phy_shutdown;
+        spin_lock_init(&priv->lock);
+
+        ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+        if (ret < 0) {
+                dev_err(dev, "usb phy addition error\n");
+                return ret;
+        }
+
+        platform_set_drvdata(pdev, priv);
+
+        return ret;
+}
+
+static int rcar_usb_phy_remove(struct platform_device *pdev)
+{
+        struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+        usb_remove_phy(&priv->phy);
+
+        return 0;
+}
+
+static struct platform_driver rcar_usb_phy_driver = {
+        .driver         = {
+                .name   = "rcar_usb_phy",
+        },
+        .probe          = rcar_usb_phy_probe,
+        .remove         = rcar_usb_phy_remove,
+};
+
+module_platform_driver(rcar_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car USB phy");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c
index 987116f9efcd..9d13c81754e0 100644
--- a/drivers/usb/phy/tegra_usb_phy.c
+++ b/drivers/usb/phy/tegra_usb_phy.c
@@ -29,7 +29,9 @@
 #include <linux/usb/ulpi.h>
 #include <asm/mach-types.h>
 #include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE          0xC5000000
+#define TEGRA_USB_SIZE          SZ_16K
 
 #define ULPI_VIEWPORT           0x170