Powerpc 8xx CPM_UART too many interrupts

Setting the fifo to only 1 byte generates one interrupt every 1ms at 9600 bauds.
This is too much. This patch reduces the threshold to speeds below 2400 bauds
like in the 8250 UART driver.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 2 insertions, 2 deletions

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 46af6e47f061..46edc649b0b7 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -71,7 +71,7 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
-#define HW_BUF_SPD_THRESHOLD    9600
+#define HW_BUF_SPD_THRESHOLD    2400
 
 /*
  * Check, if transmit buffers are processed
@@ -505,7 +505,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
         pr_debug("CPM uart[%d]:set_termios\n", port->line);
 
         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
-        if (baud <= HW_BUF_SPD_THRESHOLD ||
+        if (baud < HW_BUF_SPD_THRESHOLD ||
             (pinfo->port.state && pinfo->port.state->port.tty->low_latency))
                 pinfo->rx_fifosize = 1;
         else