[SCSI] sym2 version 2.2.1

sym2 version 2.2.1:
 - Fix MMIO BAR detection (Thanks to Bob Picco)
 - Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens)
 - Write posting fixes (Thanks to Thibaut Varene)
 - Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC
 - Make CCB_BA() return a script-endian address
 - Move range checks and disabling of devices from the queuecommand path
   to slave_alloc()
 - Remove a warning in sym_setup_cdb()
 - Keep a pointer to the scsi_target instead of the scsi_dev in the tcb
 - Remove a check for the upper layers passing an oversized cmd
 - Replace CAM_REQ_ constants with the Linux DID_ constants
 - Replace CAM_DIR_ constants with the Linux DMA_ constants
 - Inline sym_read_parisc_pdc() on non-parisc systems

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 0 insertions, 27 deletions

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.h b/drivers/scsi/sym53c8xx_2/sym_glue.h
index e943f167fb51..d3d52f14d7c0 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.h
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.h
@@ -142,33 +142,6 @@
 #define scr_to_cpu(dw)  le32_to_cpu(dw)
 
 /*
- *  Remap some status field values.
- */
-#define CAM_REQ_CMP             DID_OK
-#define CAM_SEL_TIMEOUT         DID_NO_CONNECT
-#define CAM_CMD_TIMEOUT         DID_TIME_OUT
-#define CAM_REQ_ABORTED         DID_ABORT
-#define CAM_UNCOR_PARITY        DID_PARITY
-#define CAM_SCSI_BUS_RESET      DID_RESET       
-#define CAM_REQUEUE_REQ         DID_SOFT_ERROR
-#define CAM_UNEXP_BUSFREE       DID_ERROR
-#define CAM_SCSI_BUSY           DID_BUS_BUSY
-
-#define CAM_DEV_NOT_THERE       DID_NO_CONNECT
-#define CAM_REQ_INVALID         DID_ERROR
-#define CAM_REQ_TOO_BIG         DID_ERROR
-
-#define CAM_RESRC_UNAVAIL       DID_ERROR
-
-/*
- *  Remap data direction values.
- */
-#define CAM_DIR_NONE            DMA_NONE
-#define CAM_DIR_IN              DMA_FROM_DEVICE
-#define CAM_DIR_OUT             DMA_TO_DEVICE
-#define CAM_DIR_UNKNOWN         DMA_BIDIRECTIONAL
-
-/*
  *  These ones are used as return code from 
  *  error recovery handlers under Linux.
  */