Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 351 insertions, 0 deletions

diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c
new file mode 100644
index 000000000000..7b48064364dc
--- /dev/null
+++ b/drivers/net/wan/cycx_main.c
@@ -0,0 +1,351 @@
+/*
+* cycx_main.c   Cyclades Cyclom 2X WAN Link Driver. Main module.
+*
+* Author:       Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+*
+* Copyright:    (c) 1998-2003 Arnaldo Carvalho de Melo
+*
+* Based on sdlamain.c by Gene Kozin <genek@compuserve.com> &
+*                        Jaspreet Singh <jaspreet@sangoma.com>
+*
+*               This program is free software; you can redistribute it and/or
+*               modify it under the terms of the GNU General Public License
+*               as published by the Free Software Foundation; either version
+*               2 of the License, or (at your option) any later version.
+* ============================================================================
+* Please look at the bitkeeper changelog (or any other scm tool that ends up
+* importing bitkeeper changelog or that replaces bitkeeper in the future as
+* main tool for linux development).
+* 
+* 2001/05/09    acme            Fix MODULE_DESC for debug, .bss nitpicks,
+*                               some cleanups
+* 2000/07/13    acme            remove useless #ifdef MODULE and crap
+*                               #if KERNEL_VERSION > blah
+* 2000/07/06    acme            __exit at cyclomx_cleanup
+* 2000/04/02    acme            dprintk and cycx_debug
+*                               module_init/module_exit
+* 2000/01/21    acme            rename cyclomx_open to cyclomx_mod_inc_use_count
+*                               and cyclomx_close to cyclomx_mod_dec_use_count
+* 2000/01/08    acme            cleanup
+* 1999/11/06    acme            cycx_down back to life (it needs to be
+*                               called to iounmap the dpmbase)
+* 1999/08/09    acme            removed references to enable_tx_int
+*                               use spinlocks instead of cli/sti in
+*                               cyclomx_set_state
+* 1999/05/19    acme            works directly linked into the kernel
+*                               init_waitqueue_head for 2.3.* kernel
+* 1999/05/18    acme            major cleanup (polling not needed), etc
+* 1998/08/28    acme            minor cleanup (ioctls for firmware deleted)
+*                               queue_task activated
+* 1998/08/08    acme            Initial version.
+*/
+
+#include <linux/config.h>       /* OS configuration options */
+#include <linux/stddef.h>       /* offsetof(), etc. */
+#include <linux/errno.h>        /* return codes */
+#include <linux/string.h>       /* inline memset(), etc. */
+#include <linux/slab.h>         /* kmalloc(), kfree() */
+#include <linux/kernel.h>       /* printk(), and other useful stuff */
+#include <linux/module.h>       /* support for loadable modules */
+#include <linux/ioport.h>       /* request_region(), release_region() */
+#include <linux/wanrouter.h>    /* WAN router definitions */
+#include <linux/cyclomx.h>      /* cyclomx common user API definitions */
+#include <linux/init.h>         /* __init (when not using as a module) */
+
+unsigned int cycx_debug;
+
+MODULE_AUTHOR("Arnaldo Carvalho de Melo");
+MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver.");
+MODULE_LICENSE("GPL");
+module_param(cycx_debug, int, 0);
+MODULE_PARM_DESC(cycx_debug, "cyclomx debug level");
+
+/* Defines & Macros */
+
+#define CYCX_DRV_VERSION        0       /* version number */
+#define CYCX_DRV_RELEASE        11      /* release (minor version) number */
+#define CYCX_MAX_CARDS          1       /* max number of adapters */
+
+#define CONFIG_CYCX_CARDS 1
+
+/* Function Prototypes */
+
+/* WAN link driver entry points */
+static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf);
+static int cycx_wan_shutdown(struct wan_device *wandev);
+
+/* Miscellaneous functions */
+static irqreturn_t cycx_isr(int irq, void *dev_id, struct pt_regs *regs);
+
+/* Global Data
+ * Note: All data must be explicitly initialized!!!
+ */
+
+/* private data */
+static char cycx_drvname[] = "cyclomx";
+static char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver";
+static char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo "
+                          "<acme@conectiva.com.br>";
+static int cycx_ncards = CONFIG_CYCX_CARDS;
+static struct cycx_device *cycx_card_array;     /* adapter data space */
+
+/* Kernel Loadable Module Entry Points */
+
+/*
+ * Module 'insert' entry point.
+ * o print announcement
+ * o allocate adapter data space
+ * o initialize static data
+ * o register all cards with WAN router
+ * o calibrate Cyclom 2X shared memory access delay.
+ *
+ * Return:      0       Ok
+ *              < 0     error.
+ * Context:     process
+ */
+int __init cycx_init(void)
+{
+        int cnt, err = -ENOMEM;
+
+        printk(KERN_INFO "%s v%u.%u %s\n",
+                cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE,
+                cycx_copyright);
+
+        /* Verify number of cards and allocate adapter data space */
+        cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS);
+        cycx_ncards = max_t(int, cycx_ncards, 1);
+        cycx_card_array = kmalloc(sizeof(struct cycx_device) * cycx_ncards,
+                                  GFP_KERNEL);
+        if (!cycx_card_array)
+                goto out;
+
+        memset(cycx_card_array, 0, sizeof(struct cycx_device) * cycx_ncards);
+
+        /* Register adapters with WAN router */
+        for (cnt = 0; cnt < cycx_ncards; ++cnt) {
+                struct cycx_device *card = &cycx_card_array[cnt];
+                struct wan_device *wandev = &card->wandev;
+
+                sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1);
+                wandev->magic    = ROUTER_MAGIC;
+                wandev->name     = card->devname;
+                wandev->private  = card;
+                wandev->setup    = cycx_wan_setup;
+                wandev->shutdown = cycx_wan_shutdown;
+                err = register_wan_device(wandev);
+
+                if (err) {
+                        printk(KERN_ERR "%s: %s registration failed with "
+                                        "error %d!\n",
+                                        cycx_drvname, card->devname, err);
+                        break;
+                }
+        }
+
+        err = -ENODEV;
+        if (!cnt) {
+                kfree(cycx_card_array);
+                goto out;
+        }
+        err = 0;
+        cycx_ncards = cnt;      /* adjust actual number of cards */
+out:    return err;
+}
+
+/*
+ * Module 'remove' entry point.
+ * o unregister all adapters from the WAN router
+ * o release all remaining system resources
+ */
+static void __exit cycx_exit(void)
+{
+        int i = 0;
+
+        for (; i < cycx_ncards; ++i) {
+                struct cycx_device *card = &cycx_card_array[i];
+                unregister_wan_device(card->devname);
+        }
+
+        kfree(cycx_card_array);
+}
+
+/* WAN Device Driver Entry Points */
+/*
+ * Setup/configure WAN link driver.
+ * o check adapter state
+ * o make sure firmware is present in configuration
+ * o allocate interrupt vector
+ * o setup Cyclom 2X hardware
+ * o call appropriate routine to perform protocol-specific initialization
+ *
+ * This function is called when router handles ROUTER_SETUP IOCTL. The
+ * configuration structure is in kernel memory (including extended data, if
+ * any).
+ */
+static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf)
+{
+        int rc = -EFAULT;
+        struct cycx_device *card;
+        int irq;
+
+        /* Sanity checks */
+
+        if (!wandev || !wandev->private || !conf)
+                goto out;
+
+        card = wandev->private;
+        rc = -EBUSY;
+        if (wandev->state != WAN_UNCONFIGURED)
+                goto out;
+
+        rc = -EINVAL;
+        if (!conf->data_size || !conf->data) {
+                printk(KERN_ERR "%s: firmware not found in configuration "
+                                "data!\n", wandev->name);
+                goto out;
+        }
+
+        if (conf->irq <= 0) {
+                printk(KERN_ERR "%s: can't configure without IRQ!\n",
+                                wandev->name);
+                goto out;
+        }
+
+        /* Allocate IRQ */
+        irq = conf->irq == 2 ? 9 : conf->irq;   /* IRQ2 -> IRQ9 */
+
+        if (request_irq(irq, cycx_isr, 0, wandev->name, card)) {
+                printk(KERN_ERR "%s: can't reserve IRQ %d!\n",
+                                wandev->name, irq);
+                goto out;
+        }
+
+        /* Configure hardware, load firmware, etc. */
+        memset(&card->hw, 0, sizeof(card->hw));
+        card->hw.irq     = irq;
+        card->hw.dpmsize = CYCX_WINDOWSIZE;
+        card->hw.fwid    = CFID_X25_2X;
+        spin_lock_init(&card->lock);
+        init_waitqueue_head(&card->wait_stats);
+
+        rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr);
+        if (rc)
+                goto out_irq;
+
+        /* Initialize WAN device data space */
+        wandev->irq       = irq;
+        wandev->dma       = wandev->ioport = 0;
+        wandev->maddr     = (unsigned long)card->hw.dpmbase;
+        wandev->msize     = card->hw.dpmsize;
+        wandev->hw_opt[2] = 0;
+        wandev->hw_opt[3] = card->hw.fwid;
+
+        /* Protocol-specific initialization */
+        switch (card->hw.fwid) {
+#ifdef CONFIG_CYCLOMX_X25
+        case CFID_X25_2X:
+                rc = cycx_x25_wan_init(card, conf);
+                break;
+#endif
+        default:
+                printk(KERN_ERR "%s: this firmware is not supported!\n",
+                                wandev->name);
+                rc = -EINVAL;
+        }
+
+        if (rc) {
+                cycx_down(&card->hw);
+                goto out_irq;
+        }
+
+        rc = 0;
+out:
+        return rc;
+out_irq:
+        free_irq(irq, card);
+        goto out;
+}
+
+/*
+ * Shut down WAN link driver.
+ * o shut down adapter hardware
+ * o release system resources.
+ *
+ * This function is called by the router when device is being unregistered or
+ * when it handles ROUTER_DOWN IOCTL.
+ */
+static int cycx_wan_shutdown(struct wan_device *wandev)
+{
+        int ret = -EFAULT;
+        struct cycx_device *card;
+
+        /* sanity checks */
+        if (!wandev || !wandev->private)
+                goto out;
+
+        ret = 0;
+        if (wandev->state == WAN_UNCONFIGURED)
+                goto out;
+
+        card = wandev->private;
+        wandev->state = WAN_UNCONFIGURED;
+        cycx_down(&card->hw);
+        printk(KERN_INFO "%s: irq %d being freed!\n", wandev->name,
+                        wandev->irq);
+        free_irq(wandev->irq, card);
+out:    return ret;
+}
+
+/* Miscellaneous */
+/*
+ * Cyclom 2X Interrupt Service Routine.
+ * o acknowledge Cyclom 2X hardware interrupt.
+ * o call protocol-specific interrupt service routine, if any.
+ */
+static irqreturn_t cycx_isr(int irq, void *dev_id, struct pt_regs *regs)
+{
+        struct cycx_device *card = (struct cycx_device *)dev_id;
+
+        if (!card || card->wandev.state == WAN_UNCONFIGURED)
+                goto out;
+
+        if (card->in_isr) {
+                printk(KERN_WARNING "%s: interrupt re-entrancy on IRQ %d!\n",
+                                    card->devname, card->wandev.irq);
+                goto out;
+        }
+
+        if (card->isr)
+                card->isr(card);
+        return IRQ_HANDLED;
+out:
+        return IRQ_NONE;
+}
+
+/* Set WAN device state.  */
+void cycx_set_state(struct cycx_device *card, int state)
+{
+        unsigned long flags;
+        char *string_state = NULL;
+
+        spin_lock_irqsave(&card->lock, flags);
+
+        if (card->wandev.state != state) {
+                switch (state) {
+                case WAN_CONNECTED:
+                        string_state = "connected!";
+                        break;
+                case WAN_DISCONNECTED:
+                        string_state = "disconnected!";
+                        break;
+                }
+                printk(KERN_INFO "%s: link %s\n", card->devname, string_state);
+                card->wandev.state = state;
+        }
+
+        card->state_tick = jiffies;
+        spin_unlock_irqrestore(&card->lock, flags);
+}
+
+module_init(cycx_init);
+module_exit(cycx_exit);