diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/82596.c |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/82596.c')
-rw-r--r-- | drivers/net/82596.c | 1618 |
1 files changed, 1618 insertions, 0 deletions
diff --git a/drivers/net/82596.c b/drivers/net/82596.c new file mode 100644 index 000000000000..65f97b1dc581 --- /dev/null +++ b/drivers/net/82596.c | |||
@@ -0,0 +1,1618 @@ | |||
1 | /* 82596.c: A generic 82596 ethernet driver for linux. */ | ||
2 | /* | ||
3 | Based on Apricot.c | ||
4 | Written 1994 by Mark Evans. | ||
5 | This driver is for the Apricot 82596 bus-master interface | ||
6 | |||
7 | Modularised 12/94 Mark Evans | ||
8 | |||
9 | |||
10 | Modified to support the 82596 ethernet chips on 680x0 VME boards. | ||
11 | by Richard Hirst <richard@sleepie.demon.co.uk> | ||
12 | Renamed to be 82596.c | ||
13 | |||
14 | 980825: Changed to receive directly in to sk_buffs which are | ||
15 | allocated at open() time. Eliminates copy on incoming frames | ||
16 | (small ones are still copied). Shared data now held in a | ||
17 | non-cached page, so we can run on 68060 in copyback mode. | ||
18 | |||
19 | TBD: | ||
20 | * look at deferring rx frames rather than discarding (as per tulip) | ||
21 | * handle tx ring full as per tulip | ||
22 | * performace test to tune rx_copybreak | ||
23 | |||
24 | Most of my modifications relate to the braindead big-endian | ||
25 | implementation by Intel. When the i596 is operating in | ||
26 | 'big-endian' mode, it thinks a 32 bit value of 0x12345678 | ||
27 | should be stored as 0x56781234. This is a real pain, when | ||
28 | you have linked lists which are shared by the 680x0 and the | ||
29 | i596. | ||
30 | |||
31 | Driver skeleton | ||
32 | Written 1993 by Donald Becker. | ||
33 | Copyright 1993 United States Government as represented by the Director, | ||
34 | National Security Agency. This software may only be used and distributed | ||
35 | according to the terms of the GNU General Public License as modified by SRC, | ||
36 | incorporated herein by reference. | ||
37 | |||
38 | The author may be reached as becker@scyld.com, or C/O | ||
39 | Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403 | ||
40 | |||
41 | */ | ||
42 | |||
43 | #include <linux/config.h> | ||
44 | #include <linux/module.h> | ||
45 | #include <linux/kernel.h> | ||
46 | #include <linux/string.h> | ||
47 | #include <linux/errno.h> | ||
48 | #include <linux/ioport.h> | ||
49 | #include <linux/slab.h> | ||
50 | #include <linux/interrupt.h> | ||
51 | #include <linux/delay.h> | ||
52 | #include <linux/netdevice.h> | ||
53 | #include <linux/etherdevice.h> | ||
54 | #include <linux/skbuff.h> | ||
55 | #include <linux/init.h> | ||
56 | #include <linux/bitops.h> | ||
57 | |||
58 | #include <asm/io.h> | ||
59 | #include <asm/dma.h> | ||
60 | #include <asm/pgtable.h> | ||
61 | |||
62 | static char version[] __initdata = | ||
63 | "82596.c $Revision: 1.5 $\n"; | ||
64 | |||
65 | #define DRV_NAME "82596" | ||
66 | |||
67 | /* DEBUG flags | ||
68 | */ | ||
69 | |||
70 | #define DEB_INIT 0x0001 | ||
71 | #define DEB_PROBE 0x0002 | ||
72 | #define DEB_SERIOUS 0x0004 | ||
73 | #define DEB_ERRORS 0x0008 | ||
74 | #define DEB_MULTI 0x0010 | ||
75 | #define DEB_TDR 0x0020 | ||
76 | #define DEB_OPEN 0x0040 | ||
77 | #define DEB_RESET 0x0080 | ||
78 | #define DEB_ADDCMD 0x0100 | ||
79 | #define DEB_STATUS 0x0200 | ||
80 | #define DEB_STARTTX 0x0400 | ||
81 | #define DEB_RXADDR 0x0800 | ||
82 | #define DEB_TXADDR 0x1000 | ||
83 | #define DEB_RXFRAME 0x2000 | ||
84 | #define DEB_INTS 0x4000 | ||
85 | #define DEB_STRUCT 0x8000 | ||
86 | #define DEB_ANY 0xffff | ||
87 | |||
88 | |||
89 | #define DEB(x,y) if (i596_debug & (x)) y | ||
90 | |||
91 | |||
92 | #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_MVME16x_NET_MODULE) | ||
93 | #define ENABLE_MVME16x_NET | ||
94 | #endif | ||
95 | #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE) | ||
96 | #define ENABLE_BVME6000_NET | ||
97 | #endif | ||
98 | #if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE) | ||
99 | #define ENABLE_APRICOT | ||
100 | #endif | ||
101 | |||
102 | #ifdef ENABLE_MVME16x_NET | ||
103 | #include <asm/mvme16xhw.h> | ||
104 | #endif | ||
105 | #ifdef ENABLE_BVME6000_NET | ||
106 | #include <asm/bvme6000hw.h> | ||
107 | #endif | ||
108 | |||
109 | /* | ||
110 | * Define various macros for Channel Attention, word swapping etc., dependent | ||
111 | * on architecture. MVME and BVME are 680x0 based, otherwise it is Intel. | ||
112 | */ | ||
113 | |||
114 | #ifdef __mc68000__ | ||
115 | #define WSWAPrfd(x) ((struct i596_rfd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
116 | #define WSWAPrbd(x) ((struct i596_rbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
117 | #define WSWAPiscp(x) ((struct i596_iscp *)(((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
118 | #define WSWAPscb(x) ((struct i596_scb *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
119 | #define WSWAPcmd(x) ((struct i596_cmd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
120 | #define WSWAPtbd(x) ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
121 | #define WSWAPchar(x) ((char *) (((u32)(x)<<16) | ((((u32)(x)))>>16))) | ||
122 | #define ISCP_BUSY 0x00010000 | ||
123 | #define MACH_IS_APRICOT 0 | ||
124 | #else | ||
125 | #define WSWAPrfd(x) ((struct i596_rfd *)(x)) | ||
126 | #define WSWAPrbd(x) ((struct i596_rbd *)(x)) | ||
127 | #define WSWAPiscp(x) ((struct i596_iscp *)(x)) | ||
128 | #define WSWAPscb(x) ((struct i596_scb *)(x)) | ||
129 | #define WSWAPcmd(x) ((struct i596_cmd *)(x)) | ||
130 | #define WSWAPtbd(x) ((struct i596_tbd *)(x)) | ||
131 | #define WSWAPchar(x) ((char *)(x)) | ||
132 | #define ISCP_BUSY 0x0001 | ||
133 | #define MACH_IS_APRICOT 1 | ||
134 | #endif | ||
135 | |||
136 | /* | ||
137 | * The MPU_PORT command allows direct access to the 82596. With PORT access | ||
138 | * the following commands are available (p5-18). The 32-bit port command | ||
139 | * must be word-swapped with the most significant word written first. | ||
140 | * This only applies to VME boards. | ||
141 | */ | ||
142 | #define PORT_RESET 0x00 /* reset 82596 */ | ||
143 | #define PORT_SELFTEST 0x01 /* selftest */ | ||
144 | #define PORT_ALTSCP 0x02 /* alternate SCB address */ | ||
145 | #define PORT_ALTDUMP 0x03 /* Alternate DUMP address */ | ||
146 | |||
147 | static int i596_debug = (DEB_SERIOUS|DEB_PROBE); | ||
148 | |||
149 | MODULE_AUTHOR("Richard Hirst"); | ||
150 | MODULE_DESCRIPTION("i82596 driver"); | ||
151 | MODULE_LICENSE("GPL"); | ||
152 | |||
153 | module_param(i596_debug, int, 0); | ||
154 | MODULE_PARM_DESC(i596_debug, "i82596 debug mask"); | ||
155 | |||
156 | |||
157 | /* Copy frames shorter than rx_copybreak, otherwise pass on up in | ||
158 | * a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha). | ||
159 | */ | ||
160 | static int rx_copybreak = 100; | ||
161 | |||
162 | #define PKT_BUF_SZ 1536 | ||
163 | #define MAX_MC_CNT 64 | ||
164 | |||
165 | #define I596_TOTAL_SIZE 17 | ||
166 | |||
167 | #define I596_NULL ((void *)0xffffffff) | ||
168 | |||
169 | #define CMD_EOL 0x8000 /* The last command of the list, stop. */ | ||
170 | #define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ | ||
171 | #define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ | ||
172 | |||
173 | #define CMD_FLEX 0x0008 /* Enable flexible memory model */ | ||
174 | |||
175 | enum commands { | ||
176 | CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3, | ||
177 | CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7 | ||
178 | }; | ||
179 | |||
180 | #define STAT_C 0x8000 /* Set to 0 after execution */ | ||
181 | #define STAT_B 0x4000 /* Command being executed */ | ||
182 | #define STAT_OK 0x2000 /* Command executed ok */ | ||
183 | #define STAT_A 0x1000 /* Command aborted */ | ||
184 | |||
185 | #define CUC_START 0x0100 | ||
186 | #define CUC_RESUME 0x0200 | ||
187 | #define CUC_SUSPEND 0x0300 | ||
188 | #define CUC_ABORT 0x0400 | ||
189 | #define RX_START 0x0010 | ||
190 | #define RX_RESUME 0x0020 | ||
191 | #define RX_SUSPEND 0x0030 | ||
192 | #define RX_ABORT 0x0040 | ||
193 | |||
194 | #define TX_TIMEOUT 5 | ||
195 | |||
196 | |||
197 | struct i596_reg { | ||
198 | unsigned short porthi; | ||
199 | unsigned short portlo; | ||
200 | unsigned long ca; | ||
201 | }; | ||
202 | |||
203 | #define EOF 0x8000 | ||
204 | #define SIZE_MASK 0x3fff | ||
205 | |||
206 | struct i596_tbd { | ||
207 | unsigned short size; | ||
208 | unsigned short pad; | ||
209 | struct i596_tbd *next; | ||
210 | char *data; | ||
211 | }; | ||
212 | |||
213 | /* The command structure has two 'next' pointers; v_next is the address of | ||
214 | * the next command as seen by the CPU, b_next is the address of the next | ||
215 | * command as seen by the 82596. The b_next pointer, as used by the 82596 | ||
216 | * always references the status field of the next command, rather than the | ||
217 | * v_next field, because the 82596 is unaware of v_next. It may seem more | ||
218 | * logical to put v_next at the end of the structure, but we cannot do that | ||
219 | * because the 82596 expects other fields to be there, depending on command | ||
220 | * type. | ||
221 | */ | ||
222 | |||
223 | struct i596_cmd { | ||
224 | struct i596_cmd *v_next; /* Address from CPUs viewpoint */ | ||
225 | unsigned short status; | ||
226 | unsigned short command; | ||
227 | struct i596_cmd *b_next; /* Address from i596 viewpoint */ | ||
228 | }; | ||
229 | |||
230 | struct tx_cmd { | ||
231 | struct i596_cmd cmd; | ||
232 | struct i596_tbd *tbd; | ||
233 | unsigned short size; | ||
234 | unsigned short pad; | ||
235 | struct sk_buff *skb; /* So we can free it after tx */ | ||
236 | }; | ||
237 | |||
238 | struct tdr_cmd { | ||
239 | struct i596_cmd cmd; | ||
240 | unsigned short status; | ||
241 | unsigned short pad; | ||
242 | }; | ||
243 | |||
244 | struct mc_cmd { | ||
245 | struct i596_cmd cmd; | ||
246 | short mc_cnt; | ||
247 | char mc_addrs[MAX_MC_CNT*6]; | ||
248 | }; | ||
249 | |||
250 | struct sa_cmd { | ||
251 | struct i596_cmd cmd; | ||
252 | char eth_addr[8]; | ||
253 | }; | ||
254 | |||
255 | struct cf_cmd { | ||
256 | struct i596_cmd cmd; | ||
257 | char i596_config[16]; | ||
258 | }; | ||
259 | |||
260 | struct i596_rfd { | ||
261 | unsigned short stat; | ||
262 | unsigned short cmd; | ||
263 | struct i596_rfd *b_next; /* Address from i596 viewpoint */ | ||
264 | struct i596_rbd *rbd; | ||
265 | unsigned short count; | ||
266 | unsigned short size; | ||
267 | struct i596_rfd *v_next; /* Address from CPUs viewpoint */ | ||
268 | struct i596_rfd *v_prev; | ||
269 | }; | ||
270 | |||
271 | struct i596_rbd { | ||
272 | unsigned short count; | ||
273 | unsigned short zero1; | ||
274 | struct i596_rbd *b_next; | ||
275 | unsigned char *b_data; /* Address from i596 viewpoint */ | ||
276 | unsigned short size; | ||
277 | unsigned short zero2; | ||
278 | struct sk_buff *skb; | ||
279 | struct i596_rbd *v_next; | ||
280 | struct i596_rbd *b_addr; /* This rbd addr from i596 view */ | ||
281 | unsigned char *v_data; /* Address from CPUs viewpoint */ | ||
282 | }; | ||
283 | |||
284 | #define TX_RING_SIZE 64 | ||
285 | #define RX_RING_SIZE 16 | ||
286 | |||
287 | struct i596_scb { | ||
288 | unsigned short status; | ||
289 | unsigned short command; | ||
290 | struct i596_cmd *cmd; | ||
291 | struct i596_rfd *rfd; | ||
292 | unsigned long crc_err; | ||
293 | unsigned long align_err; | ||
294 | unsigned long resource_err; | ||
295 | unsigned long over_err; | ||
296 | unsigned long rcvdt_err; | ||
297 | unsigned long short_err; | ||
298 | unsigned short t_on; | ||
299 | unsigned short t_off; | ||
300 | }; | ||
301 | |||
302 | struct i596_iscp { | ||
303 | unsigned long stat; | ||
304 | struct i596_scb *scb; | ||
305 | }; | ||
306 | |||
307 | struct i596_scp { | ||
308 | unsigned long sysbus; | ||
309 | unsigned long pad; | ||
310 | struct i596_iscp *iscp; | ||
311 | }; | ||
312 | |||
313 | struct i596_private { | ||
314 | volatile struct i596_scp scp; | ||
315 | volatile struct i596_iscp iscp; | ||
316 | volatile struct i596_scb scb; | ||
317 | struct sa_cmd sa_cmd; | ||
318 | struct cf_cmd cf_cmd; | ||
319 | struct tdr_cmd tdr_cmd; | ||
320 | struct mc_cmd mc_cmd; | ||
321 | unsigned long stat; | ||
322 | int last_restart __attribute__((aligned(4))); | ||
323 | struct i596_rfd *rfd_head; | ||
324 | struct i596_rbd *rbd_head; | ||
325 | struct i596_cmd *cmd_tail; | ||
326 | struct i596_cmd *cmd_head; | ||
327 | int cmd_backlog; | ||
328 | unsigned long last_cmd; | ||
329 | struct net_device_stats stats; | ||
330 | struct i596_rfd rfds[RX_RING_SIZE]; | ||
331 | struct i596_rbd rbds[RX_RING_SIZE]; | ||
332 | struct tx_cmd tx_cmds[TX_RING_SIZE]; | ||
333 | struct i596_tbd tbds[TX_RING_SIZE]; | ||
334 | int next_tx_cmd; | ||
335 | spinlock_t lock; | ||
336 | }; | ||
337 | |||
338 | static char init_setup[] = | ||
339 | { | ||
340 | 0x8E, /* length, prefetch on */ | ||
341 | 0xC8, /* fifo to 8, monitor off */ | ||
342 | #ifdef CONFIG_VME | ||
343 | 0xc0, /* don't save bad frames */ | ||
344 | #else | ||
345 | 0x80, /* don't save bad frames */ | ||
346 | #endif | ||
347 | 0x2E, /* No source address insertion, 8 byte preamble */ | ||
348 | 0x00, /* priority and backoff defaults */ | ||
349 | 0x60, /* interframe spacing */ | ||
350 | 0x00, /* slot time LSB */ | ||
351 | 0xf2, /* slot time and retries */ | ||
352 | 0x00, /* promiscuous mode */ | ||
353 | 0x00, /* collision detect */ | ||
354 | 0x40, /* minimum frame length */ | ||
355 | 0xff, | ||
356 | 0x00, | ||
357 | 0x7f /* *multi IA */ }; | ||
358 | |||
359 | static int i596_open(struct net_device *dev); | ||
360 | static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev); | ||
361 | static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs); | ||
362 | static int i596_close(struct net_device *dev); | ||
363 | static struct net_device_stats *i596_get_stats(struct net_device *dev); | ||
364 | static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd); | ||
365 | static void i596_tx_timeout (struct net_device *dev); | ||
366 | static void print_eth(unsigned char *buf, char *str); | ||
367 | static void set_multicast_list(struct net_device *dev); | ||
368 | |||
369 | static int rx_ring_size = RX_RING_SIZE; | ||
370 | static int ticks_limit = 25; | ||
371 | static int max_cmd_backlog = TX_RING_SIZE-1; | ||
372 | |||
373 | |||
374 | static inline void CA(struct net_device *dev) | ||
375 | { | ||
376 | #ifdef ENABLE_MVME16x_NET | ||
377 | if (MACH_IS_MVME16x) { | ||
378 | ((struct i596_reg *) dev->base_addr)->ca = 1; | ||
379 | } | ||
380 | #endif | ||
381 | #ifdef ENABLE_BVME6000_NET | ||
382 | if (MACH_IS_BVME6000) { | ||
383 | volatile u32 i; | ||
384 | |||
385 | i = *(volatile u32 *) (dev->base_addr); | ||
386 | } | ||
387 | #endif | ||
388 | #ifdef ENABLE_APRICOT | ||
389 | if (MACH_IS_APRICOT) { | ||
390 | outw(0, (short) (dev->base_addr) + 4); | ||
391 | } | ||
392 | #endif | ||
393 | } | ||
394 | |||
395 | |||
396 | static inline void MPU_PORT(struct net_device *dev, int c, volatile void *x) | ||
397 | { | ||
398 | #ifdef ENABLE_MVME16x_NET | ||
399 | if (MACH_IS_MVME16x) { | ||
400 | struct i596_reg *p = (struct i596_reg *) (dev->base_addr); | ||
401 | p->porthi = ((c) | (u32) (x)) & 0xffff; | ||
402 | p->portlo = ((c) | (u32) (x)) >> 16; | ||
403 | } | ||
404 | #endif | ||
405 | #ifdef ENABLE_BVME6000_NET | ||
406 | if (MACH_IS_BVME6000) { | ||
407 | u32 v = (u32) (c) | (u32) (x); | ||
408 | v = ((u32) (v) << 16) | ((u32) (v) >> 16); | ||
409 | *(volatile u32 *) dev->base_addr = v; | ||
410 | udelay(1); | ||
411 | *(volatile u32 *) dev->base_addr = v; | ||
412 | } | ||
413 | #endif | ||
414 | } | ||
415 | |||
416 | |||
417 | static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str) | ||
418 | { | ||
419 | while (--delcnt && lp->iscp.stat) | ||
420 | udelay(10); | ||
421 | if (!delcnt) { | ||
422 | printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", | ||
423 | dev->name, str, lp->scb.status, lp->scb.command); | ||
424 | return -1; | ||
425 | } | ||
426 | else | ||
427 | return 0; | ||
428 | } | ||
429 | |||
430 | |||
431 | static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str) | ||
432 | { | ||
433 | while (--delcnt && lp->scb.command) | ||
434 | udelay(10); | ||
435 | if (!delcnt) { | ||
436 | printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n", | ||
437 | dev->name, str, lp->scb.status, lp->scb.command); | ||
438 | return -1; | ||
439 | } | ||
440 | else | ||
441 | return 0; | ||
442 | } | ||
443 | |||
444 | |||
445 | static inline int wait_cfg(struct net_device *dev, struct i596_cmd *cmd, int delcnt, char *str) | ||
446 | { | ||
447 | volatile struct i596_cmd *c = cmd; | ||
448 | |||
449 | while (--delcnt && c->command) | ||
450 | udelay(10); | ||
451 | if (!delcnt) { | ||
452 | printk(KERN_ERR "%s: %s.\n", dev->name, str); | ||
453 | return -1; | ||
454 | } | ||
455 | else | ||
456 | return 0; | ||
457 | } | ||
458 | |||
459 | |||
460 | static void i596_display_data(struct net_device *dev) | ||
461 | { | ||
462 | struct i596_private *lp = dev->priv; | ||
463 | struct i596_cmd *cmd; | ||
464 | struct i596_rfd *rfd; | ||
465 | struct i596_rbd *rbd; | ||
466 | |||
467 | printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n", | ||
468 | &lp->scp, lp->scp.sysbus, lp->scp.iscp); | ||
469 | printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n", | ||
470 | &lp->iscp, lp->iscp.stat, lp->iscp.scb); | ||
471 | printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x," | ||
472 | " .cmd = %p, .rfd = %p\n", | ||
473 | &lp->scb, lp->scb.status, lp->scb.command, | ||
474 | lp->scb.cmd, lp->scb.rfd); | ||
475 | printk(KERN_ERR " errors: crc %lx, align %lx, resource %lx," | ||
476 | " over %lx, rcvdt %lx, short %lx\n", | ||
477 | lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err, | ||
478 | lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err); | ||
479 | cmd = lp->cmd_head; | ||
480 | while (cmd != I596_NULL) { | ||
481 | printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n", | ||
482 | cmd, cmd->status, cmd->command, cmd->b_next); | ||
483 | cmd = cmd->v_next; | ||
484 | } | ||
485 | rfd = lp->rfd_head; | ||
486 | printk(KERN_ERR "rfd_head = %p\n", rfd); | ||
487 | do { | ||
488 | printk(KERN_ERR " %p .stat %04x, .cmd %04x, b_next %p, rbd %p," | ||
489 | " count %04x\n", | ||
490 | rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd, | ||
491 | rfd->count); | ||
492 | rfd = rfd->v_next; | ||
493 | } while (rfd != lp->rfd_head); | ||
494 | rbd = lp->rbd_head; | ||
495 | printk(KERN_ERR "rbd_head = %p\n", rbd); | ||
496 | do { | ||
497 | printk(KERN_ERR " %p .count %04x, b_next %p, b_data %p, size %04x\n", | ||
498 | rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size); | ||
499 | rbd = rbd->v_next; | ||
500 | } while (rbd != lp->rbd_head); | ||
501 | } | ||
502 | |||
503 | |||
504 | #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET) | ||
505 | static irqreturn_t i596_error(int irq, void *dev_id, struct pt_regs *regs) | ||
506 | { | ||
507 | struct net_device *dev = dev_id; | ||
508 | #ifdef ENABLE_MVME16x_NET | ||
509 | if (MACH_IS_MVME16x) { | ||
510 | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | ||
511 | |||
512 | pcc2[0x28] = 1; | ||
513 | pcc2[0x2b] = 0x1d; | ||
514 | } | ||
515 | #endif | ||
516 | #ifdef ENABLE_BVME6000_NET | ||
517 | if (MACH_IS_BVME6000) { | ||
518 | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | ||
519 | |||
520 | *ethirq = 1; | ||
521 | *ethirq = 3; | ||
522 | } | ||
523 | #endif | ||
524 | printk(KERN_ERR "%s: Error interrupt\n", dev->name); | ||
525 | i596_display_data(dev); | ||
526 | return IRQ_HANDLED; | ||
527 | } | ||
528 | #endif | ||
529 | |||
530 | static inline void init_rx_bufs(struct net_device *dev) | ||
531 | { | ||
532 | struct i596_private *lp = dev->priv; | ||
533 | int i; | ||
534 | struct i596_rfd *rfd; | ||
535 | struct i596_rbd *rbd; | ||
536 | |||
537 | /* First build the Receive Buffer Descriptor List */ | ||
538 | |||
539 | for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) { | ||
540 | struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ); | ||
541 | |||
542 | if (skb == NULL) | ||
543 | panic("82596: alloc_skb() failed"); | ||
544 | skb->dev = dev; | ||
545 | rbd->v_next = rbd+1; | ||
546 | rbd->b_next = WSWAPrbd(virt_to_bus(rbd+1)); | ||
547 | rbd->b_addr = WSWAPrbd(virt_to_bus(rbd)); | ||
548 | rbd->skb = skb; | ||
549 | rbd->v_data = skb->tail; | ||
550 | rbd->b_data = WSWAPchar(virt_to_bus(skb->tail)); | ||
551 | rbd->size = PKT_BUF_SZ; | ||
552 | #ifdef __mc68000__ | ||
553 | cache_clear(virt_to_phys(skb->tail), PKT_BUF_SZ); | ||
554 | #endif | ||
555 | } | ||
556 | lp->rbd_head = lp->rbds; | ||
557 | rbd = lp->rbds + rx_ring_size - 1; | ||
558 | rbd->v_next = lp->rbds; | ||
559 | rbd->b_next = WSWAPrbd(virt_to_bus(lp->rbds)); | ||
560 | |||
561 | /* Now build the Receive Frame Descriptor List */ | ||
562 | |||
563 | for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) { | ||
564 | rfd->rbd = I596_NULL; | ||
565 | rfd->v_next = rfd+1; | ||
566 | rfd->v_prev = rfd-1; | ||
567 | rfd->b_next = WSWAPrfd(virt_to_bus(rfd+1)); | ||
568 | rfd->cmd = CMD_FLEX; | ||
569 | } | ||
570 | lp->rfd_head = lp->rfds; | ||
571 | lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds)); | ||
572 | rfd = lp->rfds; | ||
573 | rfd->rbd = lp->rbd_head; | ||
574 | rfd->v_prev = lp->rfds + rx_ring_size - 1; | ||
575 | rfd = lp->rfds + rx_ring_size - 1; | ||
576 | rfd->v_next = lp->rfds; | ||
577 | rfd->b_next = WSWAPrfd(virt_to_bus(lp->rfds)); | ||
578 | rfd->cmd = CMD_EOL|CMD_FLEX; | ||
579 | } | ||
580 | |||
581 | static inline void remove_rx_bufs(struct net_device *dev) | ||
582 | { | ||
583 | struct i596_private *lp = dev->priv; | ||
584 | struct i596_rbd *rbd; | ||
585 | int i; | ||
586 | |||
587 | for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) { | ||
588 | if (rbd->skb == NULL) | ||
589 | break; | ||
590 | dev_kfree_skb(rbd->skb); | ||
591 | } | ||
592 | } | ||
593 | |||
594 | |||
595 | static void rebuild_rx_bufs(struct net_device *dev) | ||
596 | { | ||
597 | struct i596_private *lp = dev->priv; | ||
598 | int i; | ||
599 | |||
600 | /* Ensure rx frame/buffer descriptors are tidy */ | ||
601 | |||
602 | for (i = 0; i < rx_ring_size; i++) { | ||
603 | lp->rfds[i].rbd = I596_NULL; | ||
604 | lp->rfds[i].cmd = CMD_FLEX; | ||
605 | } | ||
606 | lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX; | ||
607 | lp->rfd_head = lp->rfds; | ||
608 | lp->scb.rfd = WSWAPrfd(virt_to_bus(lp->rfds)); | ||
609 | lp->rbd_head = lp->rbds; | ||
610 | lp->rfds[0].rbd = WSWAPrbd(virt_to_bus(lp->rbds)); | ||
611 | } | ||
612 | |||
613 | |||
614 | static int init_i596_mem(struct net_device *dev) | ||
615 | { | ||
616 | struct i596_private *lp = dev->priv; | ||
617 | #if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) | ||
618 | short ioaddr = dev->base_addr; | ||
619 | #endif | ||
620 | unsigned long flags; | ||
621 | |||
622 | MPU_PORT(dev, PORT_RESET, NULL); | ||
623 | |||
624 | udelay(100); /* Wait 100us - seems to help */ | ||
625 | |||
626 | #if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET) | ||
627 | #ifdef ENABLE_MVME16x_NET | ||
628 | if (MACH_IS_MVME16x) { | ||
629 | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | ||
630 | |||
631 | /* Disable all ints for now */ | ||
632 | pcc2[0x28] = 1; | ||
633 | pcc2[0x2a] = 0x48; | ||
634 | /* Following disables snooping. Snooping is not required | ||
635 | * as we make appropriate use of non-cached pages for | ||
636 | * shared data, and cache_push/cache_clear. | ||
637 | */ | ||
638 | pcc2[0x2b] = 0x08; | ||
639 | } | ||
640 | #endif | ||
641 | #ifdef ENABLE_BVME6000_NET | ||
642 | if (MACH_IS_BVME6000) { | ||
643 | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | ||
644 | |||
645 | *ethirq = 1; | ||
646 | } | ||
647 | #endif | ||
648 | |||
649 | /* change the scp address */ | ||
650 | |||
651 | MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp)); | ||
652 | |||
653 | #elif defined(ENABLE_APRICOT) | ||
654 | |||
655 | { | ||
656 | u32 scp = virt_to_bus(&lp->scp); | ||
657 | |||
658 | /* change the scp address */ | ||
659 | outw(0, ioaddr); | ||
660 | outw(0, ioaddr); | ||
661 | outb(4, ioaddr + 0xf); | ||
662 | outw(scp | 2, ioaddr); | ||
663 | outw(scp >> 16, ioaddr); | ||
664 | } | ||
665 | #endif | ||
666 | |||
667 | lp->last_cmd = jiffies; | ||
668 | |||
669 | #ifdef ENABLE_MVME16x_NET | ||
670 | if (MACH_IS_MVME16x) | ||
671 | lp->scp.sysbus = 0x00000054; | ||
672 | #endif | ||
673 | #ifdef ENABLE_BVME6000_NET | ||
674 | if (MACH_IS_BVME6000) | ||
675 | lp->scp.sysbus = 0x0000004c; | ||
676 | #endif | ||
677 | #ifdef ENABLE_APRICOT | ||
678 | if (MACH_IS_APRICOT) | ||
679 | lp->scp.sysbus = 0x00440000; | ||
680 | #endif | ||
681 | |||
682 | lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp)); | ||
683 | lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb)); | ||
684 | lp->iscp.stat = ISCP_BUSY; | ||
685 | lp->cmd_backlog = 0; | ||
686 | |||
687 | lp->cmd_head = lp->scb.cmd = I596_NULL; | ||
688 | |||
689 | #ifdef ENABLE_BVME6000_NET | ||
690 | if (MACH_IS_BVME6000) { | ||
691 | lp->scb.t_on = 7 * 25; | ||
692 | lp->scb.t_off = 1 * 25; | ||
693 | } | ||
694 | #endif | ||
695 | |||
696 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name)); | ||
697 | |||
698 | #if defined(ENABLE_APRICOT) | ||
699 | (void) inb(ioaddr + 0x10); | ||
700 | outb(4, ioaddr + 0xf); | ||
701 | #endif | ||
702 | CA(dev); | ||
703 | |||
704 | if (wait_istat(dev,lp,1000,"initialization timed out")) | ||
705 | goto failed; | ||
706 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name)); | ||
707 | |||
708 | /* Ensure rx frame/buffer descriptors are tidy */ | ||
709 | rebuild_rx_bufs(dev); | ||
710 | lp->scb.command = 0; | ||
711 | |||
712 | #ifdef ENABLE_MVME16x_NET | ||
713 | if (MACH_IS_MVME16x) { | ||
714 | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | ||
715 | |||
716 | /* Enable ints, etc. now */ | ||
717 | pcc2[0x2a] = 0x55; /* Edge sensitive */ | ||
718 | pcc2[0x2b] = 0x15; | ||
719 | } | ||
720 | #endif | ||
721 | #ifdef ENABLE_BVME6000_NET | ||
722 | if (MACH_IS_BVME6000) { | ||
723 | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | ||
724 | |||
725 | *ethirq = 3; | ||
726 | } | ||
727 | #endif | ||
728 | |||
729 | |||
730 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name)); | ||
731 | memcpy(lp->cf_cmd.i596_config, init_setup, 14); | ||
732 | lp->cf_cmd.cmd.command = CmdConfigure; | ||
733 | i596_add_cmd(dev, &lp->cf_cmd.cmd); | ||
734 | |||
735 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name)); | ||
736 | memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6); | ||
737 | lp->sa_cmd.cmd.command = CmdSASetup; | ||
738 | i596_add_cmd(dev, &lp->sa_cmd.cmd); | ||
739 | |||
740 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name)); | ||
741 | lp->tdr_cmd.cmd.command = CmdTDR; | ||
742 | i596_add_cmd(dev, &lp->tdr_cmd.cmd); | ||
743 | |||
744 | spin_lock_irqsave (&lp->lock, flags); | ||
745 | |||
746 | if (wait_cmd(dev,lp,1000,"timed out waiting to issue RX_START")) { | ||
747 | spin_unlock_irqrestore (&lp->lock, flags); | ||
748 | goto failed; | ||
749 | } | ||
750 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name)); | ||
751 | lp->scb.command = RX_START; | ||
752 | CA(dev); | ||
753 | |||
754 | spin_unlock_irqrestore (&lp->lock, flags); | ||
755 | |||
756 | if (wait_cmd(dev,lp,1000,"RX_START not processed")) | ||
757 | goto failed; | ||
758 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name)); | ||
759 | return 0; | ||
760 | |||
761 | failed: | ||
762 | printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name); | ||
763 | MPU_PORT(dev, PORT_RESET, NULL); | ||
764 | return -1; | ||
765 | } | ||
766 | |||
767 | static inline int i596_rx(struct net_device *dev) | ||
768 | { | ||
769 | struct i596_private *lp = dev->priv; | ||
770 | struct i596_rfd *rfd; | ||
771 | struct i596_rbd *rbd; | ||
772 | int frames = 0; | ||
773 | |||
774 | DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n", | ||
775 | lp->rfd_head, lp->rbd_head)); | ||
776 | |||
777 | rfd = lp->rfd_head; /* Ref next frame to check */ | ||
778 | |||
779 | while ((rfd->stat) & STAT_C) { /* Loop while complete frames */ | ||
780 | if (rfd->rbd == I596_NULL) | ||
781 | rbd = I596_NULL; | ||
782 | else if (rfd->rbd == lp->rbd_head->b_addr) | ||
783 | rbd = lp->rbd_head; | ||
784 | else { | ||
785 | printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name); | ||
786 | /* XXX Now what? */ | ||
787 | rbd = I596_NULL; | ||
788 | } | ||
789 | DEB(DEB_RXFRAME, printk(KERN_DEBUG " rfd %p, rfd.rbd %p, rfd.stat %04x\n", | ||
790 | rfd, rfd->rbd, rfd->stat)); | ||
791 | |||
792 | if (rbd != I596_NULL && ((rfd->stat) & STAT_OK)) { | ||
793 | /* a good frame */ | ||
794 | int pkt_len = rbd->count & 0x3fff; | ||
795 | struct sk_buff *skb = rbd->skb; | ||
796 | int rx_in_place = 0; | ||
797 | |||
798 | DEB(DEB_RXADDR,print_eth(rbd->v_data, "received")); | ||
799 | frames++; | ||
800 | |||
801 | /* Check if the packet is long enough to just accept | ||
802 | * without copying to a properly sized skbuff. | ||
803 | */ | ||
804 | |||
805 | if (pkt_len > rx_copybreak) { | ||
806 | struct sk_buff *newskb; | ||
807 | |||
808 | /* Get fresh skbuff to replace filled one. */ | ||
809 | newskb = dev_alloc_skb(PKT_BUF_SZ); | ||
810 | if (newskb == NULL) { | ||
811 | skb = NULL; /* drop pkt */ | ||
812 | goto memory_squeeze; | ||
813 | } | ||
814 | /* Pass up the skb already on the Rx ring. */ | ||
815 | skb_put(skb, pkt_len); | ||
816 | rx_in_place = 1; | ||
817 | rbd->skb = newskb; | ||
818 | newskb->dev = dev; | ||
819 | rbd->v_data = newskb->tail; | ||
820 | rbd->b_data = WSWAPchar(virt_to_bus(newskb->tail)); | ||
821 | #ifdef __mc68000__ | ||
822 | cache_clear(virt_to_phys(newskb->tail), PKT_BUF_SZ); | ||
823 | #endif | ||
824 | } | ||
825 | else | ||
826 | skb = dev_alloc_skb(pkt_len + 2); | ||
827 | memory_squeeze: | ||
828 | if (skb == NULL) { | ||
829 | /* XXX tulip.c can defer packets here!! */ | ||
830 | printk(KERN_WARNING "%s: i596_rx Memory squeeze, dropping packet.\n", dev->name); | ||
831 | lp->stats.rx_dropped++; | ||
832 | } | ||
833 | else { | ||
834 | skb->dev = dev; | ||
835 | if (!rx_in_place) { | ||
836 | /* 16 byte align the data fields */ | ||
837 | skb_reserve(skb, 2); | ||
838 | memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len); | ||
839 | } | ||
840 | skb->protocol=eth_type_trans(skb,dev); | ||
841 | skb->len = pkt_len; | ||
842 | #ifdef __mc68000__ | ||
843 | cache_clear(virt_to_phys(rbd->skb->tail), | ||
844 | pkt_len); | ||
845 | #endif | ||
846 | netif_rx(skb); | ||
847 | dev->last_rx = jiffies; | ||
848 | lp->stats.rx_packets++; | ||
849 | lp->stats.rx_bytes+=pkt_len; | ||
850 | } | ||
851 | } | ||
852 | else { | ||
853 | DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n", | ||
854 | dev->name, rfd->stat)); | ||
855 | lp->stats.rx_errors++; | ||
856 | if ((rfd->stat) & 0x0001) | ||
857 | lp->stats.collisions++; | ||
858 | if ((rfd->stat) & 0x0080) | ||
859 | lp->stats.rx_length_errors++; | ||
860 | if ((rfd->stat) & 0x0100) | ||
861 | lp->stats.rx_over_errors++; | ||
862 | if ((rfd->stat) & 0x0200) | ||
863 | lp->stats.rx_fifo_errors++; | ||
864 | if ((rfd->stat) & 0x0400) | ||
865 | lp->stats.rx_frame_errors++; | ||
866 | if ((rfd->stat) & 0x0800) | ||
867 | lp->stats.rx_crc_errors++; | ||
868 | if ((rfd->stat) & 0x1000) | ||
869 | lp->stats.rx_length_errors++; | ||
870 | } | ||
871 | |||
872 | /* Clear the buffer descriptor count and EOF + F flags */ | ||
873 | |||
874 | if (rbd != I596_NULL && (rbd->count & 0x4000)) { | ||
875 | rbd->count = 0; | ||
876 | lp->rbd_head = rbd->v_next; | ||
877 | } | ||
878 | |||
879 | /* Tidy the frame descriptor, marking it as end of list */ | ||
880 | |||
881 | rfd->rbd = I596_NULL; | ||
882 | rfd->stat = 0; | ||
883 | rfd->cmd = CMD_EOL|CMD_FLEX; | ||
884 | rfd->count = 0; | ||
885 | |||
886 | /* Remove end-of-list from old end descriptor */ | ||
887 | |||
888 | rfd->v_prev->cmd = CMD_FLEX; | ||
889 | |||
890 | /* Update record of next frame descriptor to process */ | ||
891 | |||
892 | lp->scb.rfd = rfd->b_next; | ||
893 | lp->rfd_head = rfd->v_next; | ||
894 | rfd = lp->rfd_head; | ||
895 | } | ||
896 | |||
897 | DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames)); | ||
898 | |||
899 | return 0; | ||
900 | } | ||
901 | |||
902 | |||
903 | static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp) | ||
904 | { | ||
905 | struct i596_cmd *ptr; | ||
906 | |||
907 | while (lp->cmd_head != I596_NULL) { | ||
908 | ptr = lp->cmd_head; | ||
909 | lp->cmd_head = ptr->v_next; | ||
910 | lp->cmd_backlog--; | ||
911 | |||
912 | switch ((ptr->command) & 0x7) { | ||
913 | case CmdTx: | ||
914 | { | ||
915 | struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr; | ||
916 | struct sk_buff *skb = tx_cmd->skb; | ||
917 | |||
918 | dev_kfree_skb(skb); | ||
919 | |||
920 | lp->stats.tx_errors++; | ||
921 | lp->stats.tx_aborted_errors++; | ||
922 | |||
923 | ptr->v_next = ptr->b_next = I596_NULL; | ||
924 | tx_cmd->cmd.command = 0; /* Mark as free */ | ||
925 | break; | ||
926 | } | ||
927 | default: | ||
928 | ptr->v_next = ptr->b_next = I596_NULL; | ||
929 | } | ||
930 | } | ||
931 | |||
932 | wait_cmd(dev,lp,100,"i596_cleanup_cmd timed out"); | ||
933 | lp->scb.cmd = I596_NULL; | ||
934 | } | ||
935 | |||
936 | static inline void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) | ||
937 | { | ||
938 | unsigned long flags; | ||
939 | |||
940 | DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n")); | ||
941 | |||
942 | spin_lock_irqsave (&lp->lock, flags); | ||
943 | |||
944 | wait_cmd(dev,lp,100,"i596_reset timed out"); | ||
945 | |||
946 | netif_stop_queue(dev); | ||
947 | |||
948 | lp->scb.command = CUC_ABORT | RX_ABORT; | ||
949 | CA(dev); | ||
950 | |||
951 | /* wait for shutdown */ | ||
952 | wait_cmd(dev,lp,1000,"i596_reset 2 timed out"); | ||
953 | spin_unlock_irqrestore (&lp->lock, flags); | ||
954 | |||
955 | i596_cleanup_cmd(dev,lp); | ||
956 | i596_rx(dev); | ||
957 | |||
958 | netif_start_queue(dev); | ||
959 | init_i596_mem(dev); | ||
960 | } | ||
961 | |||
962 | static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) | ||
963 | { | ||
964 | struct i596_private *lp = dev->priv; | ||
965 | int ioaddr = dev->base_addr; | ||
966 | unsigned long flags; | ||
967 | |||
968 | DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n")); | ||
969 | |||
970 | cmd->status = 0; | ||
971 | cmd->command |= (CMD_EOL | CMD_INTR); | ||
972 | cmd->v_next = cmd->b_next = I596_NULL; | ||
973 | |||
974 | spin_lock_irqsave (&lp->lock, flags); | ||
975 | |||
976 | if (lp->cmd_head != I596_NULL) { | ||
977 | lp->cmd_tail->v_next = cmd; | ||
978 | lp->cmd_tail->b_next = WSWAPcmd(virt_to_bus(&cmd->status)); | ||
979 | } else { | ||
980 | lp->cmd_head = cmd; | ||
981 | wait_cmd(dev,lp,100,"i596_add_cmd timed out"); | ||
982 | lp->scb.cmd = WSWAPcmd(virt_to_bus(&cmd->status)); | ||
983 | lp->scb.command = CUC_START; | ||
984 | CA(dev); | ||
985 | } | ||
986 | lp->cmd_tail = cmd; | ||
987 | lp->cmd_backlog++; | ||
988 | |||
989 | spin_unlock_irqrestore (&lp->lock, flags); | ||
990 | |||
991 | if (lp->cmd_backlog > max_cmd_backlog) { | ||
992 | unsigned long tickssofar = jiffies - lp->last_cmd; | ||
993 | |||
994 | if (tickssofar < ticks_limit) | ||
995 | return; | ||
996 | |||
997 | printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name); | ||
998 | |||
999 | i596_reset(dev, lp, ioaddr); | ||
1000 | } | ||
1001 | } | ||
1002 | |||
1003 | static int i596_open(struct net_device *dev) | ||
1004 | { | ||
1005 | int res = 0; | ||
1006 | |||
1007 | DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq)); | ||
1008 | |||
1009 | if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) { | ||
1010 | printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); | ||
1011 | return -EAGAIN; | ||
1012 | } | ||
1013 | #ifdef ENABLE_MVME16x_NET | ||
1014 | if (MACH_IS_MVME16x) { | ||
1015 | if (request_irq(0x56, i596_error, 0, "i82596_error", dev)) | ||
1016 | return -EAGAIN; | ||
1017 | } | ||
1018 | #endif | ||
1019 | init_rx_bufs(dev); | ||
1020 | |||
1021 | netif_start_queue(dev); | ||
1022 | |||
1023 | /* Initialize the 82596 memory */ | ||
1024 | if (init_i596_mem(dev)) { | ||
1025 | res = -EAGAIN; | ||
1026 | free_irq(dev->irq, dev); | ||
1027 | } | ||
1028 | |||
1029 | return res; | ||
1030 | } | ||
1031 | |||
1032 | static void i596_tx_timeout (struct net_device *dev) | ||
1033 | { | ||
1034 | struct i596_private *lp = dev->priv; | ||
1035 | int ioaddr = dev->base_addr; | ||
1036 | |||
1037 | /* Transmitter timeout, serious problems. */ | ||
1038 | DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n", | ||
1039 | dev->name)); | ||
1040 | |||
1041 | lp->stats.tx_errors++; | ||
1042 | |||
1043 | /* Try to restart the adaptor */ | ||
1044 | if (lp->last_restart == lp->stats.tx_packets) { | ||
1045 | DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n")); | ||
1046 | /* Shutdown and restart */ | ||
1047 | i596_reset (dev, lp, ioaddr); | ||
1048 | } else { | ||
1049 | /* Issue a channel attention signal */ | ||
1050 | DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n")); | ||
1051 | lp->scb.command = CUC_START | RX_START; | ||
1052 | CA (dev); | ||
1053 | lp->last_restart = lp->stats.tx_packets; | ||
1054 | } | ||
1055 | |||
1056 | dev->trans_start = jiffies; | ||
1057 | netif_wake_queue (dev); | ||
1058 | } | ||
1059 | |||
1060 | |||
1061 | static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev) | ||
1062 | { | ||
1063 | struct i596_private *lp = dev->priv; | ||
1064 | struct tx_cmd *tx_cmd; | ||
1065 | struct i596_tbd *tbd; | ||
1066 | short length = skb->len; | ||
1067 | dev->trans_start = jiffies; | ||
1068 | |||
1069 | DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%x) called\n", dev->name, | ||
1070 | skb->len, (unsigned int)skb->data)); | ||
1071 | |||
1072 | if (skb->len < ETH_ZLEN) { | ||
1073 | skb = skb_padto(skb, ETH_ZLEN); | ||
1074 | if (skb == NULL) | ||
1075 | return 0; | ||
1076 | length = ETH_ZLEN; | ||
1077 | } | ||
1078 | netif_stop_queue(dev); | ||
1079 | |||
1080 | tx_cmd = lp->tx_cmds + lp->next_tx_cmd; | ||
1081 | tbd = lp->tbds + lp->next_tx_cmd; | ||
1082 | |||
1083 | if (tx_cmd->cmd.command) { | ||
1084 | printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n", | ||
1085 | dev->name); | ||
1086 | lp->stats.tx_dropped++; | ||
1087 | |||
1088 | dev_kfree_skb(skb); | ||
1089 | } else { | ||
1090 | if (++lp->next_tx_cmd == TX_RING_SIZE) | ||
1091 | lp->next_tx_cmd = 0; | ||
1092 | tx_cmd->tbd = WSWAPtbd(virt_to_bus(tbd)); | ||
1093 | tbd->next = I596_NULL; | ||
1094 | |||
1095 | tx_cmd->cmd.command = CMD_FLEX | CmdTx; | ||
1096 | tx_cmd->skb = skb; | ||
1097 | |||
1098 | tx_cmd->pad = 0; | ||
1099 | tx_cmd->size = 0; | ||
1100 | tbd->pad = 0; | ||
1101 | tbd->size = EOF | length; | ||
1102 | |||
1103 | tbd->data = WSWAPchar(virt_to_bus(skb->data)); | ||
1104 | |||
1105 | #ifdef __mc68000__ | ||
1106 | cache_push(virt_to_phys(skb->data), length); | ||
1107 | #endif | ||
1108 | DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued")); | ||
1109 | i596_add_cmd(dev, &tx_cmd->cmd); | ||
1110 | |||
1111 | lp->stats.tx_packets++; | ||
1112 | lp->stats.tx_bytes += length; | ||
1113 | } | ||
1114 | |||
1115 | netif_start_queue(dev); | ||
1116 | |||
1117 | return 0; | ||
1118 | } | ||
1119 | |||
1120 | static void print_eth(unsigned char *add, char *str) | ||
1121 | { | ||
1122 | int i; | ||
1123 | |||
1124 | printk(KERN_DEBUG "i596 0x%p, ", add); | ||
1125 | for (i = 0; i < 6; i++) | ||
1126 | printk(" %02X", add[i + 6]); | ||
1127 | printk(" -->"); | ||
1128 | for (i = 0; i < 6; i++) | ||
1129 | printk(" %02X", add[i]); | ||
1130 | printk(" %02X%02X, %s\n", add[12], add[13], str); | ||
1131 | } | ||
1132 | |||
1133 | static int io = 0x300; | ||
1134 | static int irq = 10; | ||
1135 | |||
1136 | struct net_device * __init i82596_probe(int unit) | ||
1137 | { | ||
1138 | struct net_device *dev; | ||
1139 | int i; | ||
1140 | struct i596_private *lp; | ||
1141 | char eth_addr[8]; | ||
1142 | static int probed; | ||
1143 | int err; | ||
1144 | |||
1145 | if (probed) | ||
1146 | return ERR_PTR(-ENODEV); | ||
1147 | probed++; | ||
1148 | |||
1149 | dev = alloc_etherdev(0); | ||
1150 | if (!dev) | ||
1151 | return ERR_PTR(-ENOMEM); | ||
1152 | |||
1153 | if (unit >= 0) { | ||
1154 | sprintf(dev->name, "eth%d", unit); | ||
1155 | netdev_boot_setup_check(dev); | ||
1156 | } else { | ||
1157 | dev->base_addr = io; | ||
1158 | dev->irq = irq; | ||
1159 | } | ||
1160 | |||
1161 | #ifdef ENABLE_MVME16x_NET | ||
1162 | if (MACH_IS_MVME16x) { | ||
1163 | if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) { | ||
1164 | printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n"); | ||
1165 | err = -ENODEV; | ||
1166 | goto out; | ||
1167 | } | ||
1168 | memcpy(eth_addr, (void *) 0xfffc1f2c, 6); /* YUCK! Get addr from NOVRAM */ | ||
1169 | dev->base_addr = MVME_I596_BASE; | ||
1170 | dev->irq = (unsigned) MVME16x_IRQ_I596; | ||
1171 | } | ||
1172 | #endif | ||
1173 | #ifdef ENABLE_BVME6000_NET | ||
1174 | if (MACH_IS_BVME6000) { | ||
1175 | volatile unsigned char *rtc = (unsigned char *) BVME_RTC_BASE; | ||
1176 | unsigned char msr = rtc[3]; | ||
1177 | int i; | ||
1178 | |||
1179 | rtc[3] |= 0x80; | ||
1180 | for (i = 0; i < 6; i++) | ||
1181 | eth_addr[i] = rtc[i * 4 + 7]; /* Stored in RTC RAM at offset 1 */ | ||
1182 | rtc[3] = msr; | ||
1183 | dev->base_addr = BVME_I596_BASE; | ||
1184 | dev->irq = (unsigned) BVME_IRQ_I596; | ||
1185 | } | ||
1186 | #endif | ||
1187 | #ifdef ENABLE_APRICOT | ||
1188 | { | ||
1189 | int checksum = 0; | ||
1190 | int ioaddr = 0x300; | ||
1191 | |||
1192 | /* this is easy the ethernet interface can only be at 0x300 */ | ||
1193 | /* first check nothing is already registered here */ | ||
1194 | |||
1195 | if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) { | ||
1196 | printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr); | ||
1197 | err = -EBUSY; | ||
1198 | goto out; | ||
1199 | } | ||
1200 | |||
1201 | for (i = 0; i < 8; i++) { | ||
1202 | eth_addr[i] = inb(ioaddr + 8 + i); | ||
1203 | checksum += eth_addr[i]; | ||
1204 | } | ||
1205 | |||
1206 | /* checksum is a multiple of 0x100, got this wrong first time | ||
1207 | some machines have 0x100, some 0x200. The DOS driver doesn't | ||
1208 | even bother with the checksum. | ||
1209 | Some other boards trip the checksum.. but then appear as | ||
1210 | ether address 0. Trap these - AC */ | ||
1211 | |||
1212 | if ((checksum % 0x100) || | ||
1213 | (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) { | ||
1214 | err = -ENODEV; | ||
1215 | goto out1; | ||
1216 | } | ||
1217 | |||
1218 | dev->base_addr = ioaddr; | ||
1219 | dev->irq = 10; | ||
1220 | } | ||
1221 | #endif | ||
1222 | dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0); | ||
1223 | if (!dev->mem_start) { | ||
1224 | err = -ENOMEM; | ||
1225 | goto out1; | ||
1226 | } | ||
1227 | |||
1228 | DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr)); | ||
1229 | |||
1230 | for (i = 0; i < 6; i++) | ||
1231 | DEB(DEB_PROBE,printk(" %2.2X", dev->dev_addr[i] = eth_addr[i])); | ||
1232 | |||
1233 | DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq)); | ||
1234 | |||
1235 | DEB(DEB_PROBE,printk(KERN_INFO "%s", version)); | ||
1236 | |||
1237 | /* The 82596-specific entries in the device structure. */ | ||
1238 | SET_MODULE_OWNER(dev); | ||
1239 | dev->open = i596_open; | ||
1240 | dev->stop = i596_close; | ||
1241 | dev->hard_start_xmit = i596_start_xmit; | ||
1242 | dev->get_stats = i596_get_stats; | ||
1243 | dev->set_multicast_list = set_multicast_list; | ||
1244 | dev->tx_timeout = i596_tx_timeout; | ||
1245 | dev->watchdog_timeo = TX_TIMEOUT; | ||
1246 | |||
1247 | dev->priv = (void *)(dev->mem_start); | ||
1248 | |||
1249 | lp = dev->priv; | ||
1250 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%d bytes), lp->scb at 0x%08lx\n", | ||
1251 | dev->name, (unsigned long)lp, | ||
1252 | sizeof(struct i596_private), (unsigned long)&lp->scb)); | ||
1253 | memset((void *) lp, 0, sizeof(struct i596_private)); | ||
1254 | |||
1255 | #ifdef __mc68000__ | ||
1256 | cache_push(virt_to_phys((void *)(dev->mem_start)), 4096); | ||
1257 | cache_clear(virt_to_phys((void *)(dev->mem_start)), 4096); | ||
1258 | kernel_set_cachemode((void *)(dev->mem_start), 4096, IOMAP_NOCACHE_SER); | ||
1259 | #endif | ||
1260 | lp->scb.command = 0; | ||
1261 | lp->scb.cmd = I596_NULL; | ||
1262 | lp->scb.rfd = I596_NULL; | ||
1263 | spin_lock_init(&lp->lock); | ||
1264 | |||
1265 | err = register_netdev(dev); | ||
1266 | if (err) | ||
1267 | goto out2; | ||
1268 | return dev; | ||
1269 | out2: | ||
1270 | #ifdef __mc68000__ | ||
1271 | /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, | ||
1272 | * XXX which may be invalid (CONFIG_060_WRITETHROUGH) | ||
1273 | */ | ||
1274 | kernel_set_cachemode((void *)(dev->mem_start), 4096, | ||
1275 | IOMAP_FULL_CACHING); | ||
1276 | #endif | ||
1277 | free_page ((u32)(dev->mem_start)); | ||
1278 | out1: | ||
1279 | #ifdef ENABLE_APRICOT | ||
1280 | release_region(dev->base_addr, I596_TOTAL_SIZE); | ||
1281 | #endif | ||
1282 | out: | ||
1283 | free_netdev(dev); | ||
1284 | return ERR_PTR(err); | ||
1285 | } | ||
1286 | |||
1287 | static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs) | ||
1288 | { | ||
1289 | struct net_device *dev = dev_id; | ||
1290 | struct i596_private *lp; | ||
1291 | short ioaddr; | ||
1292 | unsigned short status, ack_cmd = 0; | ||
1293 | int handled = 0; | ||
1294 | |||
1295 | #ifdef ENABLE_BVME6000_NET | ||
1296 | if (MACH_IS_BVME6000) { | ||
1297 | if (*(char *) BVME_LOCAL_IRQ_STAT & BVME_ETHERR) { | ||
1298 | i596_error(irq, dev_id, regs); | ||
1299 | return IRQ_HANDLED; | ||
1300 | } | ||
1301 | } | ||
1302 | #endif | ||
1303 | if (dev == NULL) { | ||
1304 | printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq); | ||
1305 | return IRQ_NONE; | ||
1306 | } | ||
1307 | |||
1308 | ioaddr = dev->base_addr; | ||
1309 | lp = dev->priv; | ||
1310 | |||
1311 | spin_lock (&lp->lock); | ||
1312 | |||
1313 | wait_cmd(dev,lp,100,"i596 interrupt, timeout"); | ||
1314 | status = lp->scb.status; | ||
1315 | |||
1316 | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n", | ||
1317 | dev->name, irq, status)); | ||
1318 | |||
1319 | ack_cmd = status & 0xf000; | ||
1320 | |||
1321 | if ((status & 0x8000) || (status & 0x2000)) { | ||
1322 | struct i596_cmd *ptr; | ||
1323 | |||
1324 | handled = 1; | ||
1325 | if ((status & 0x8000)) | ||
1326 | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name)); | ||
1327 | if ((status & 0x2000)) | ||
1328 | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700)); | ||
1329 | |||
1330 | while ((lp->cmd_head != I596_NULL) && (lp->cmd_head->status & STAT_C)) { | ||
1331 | ptr = lp->cmd_head; | ||
1332 | |||
1333 | DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n", | ||
1334 | lp->cmd_head->status, lp->cmd_head->command)); | ||
1335 | lp->cmd_head = ptr->v_next; | ||
1336 | lp->cmd_backlog--; | ||
1337 | |||
1338 | switch ((ptr->command) & 0x7) { | ||
1339 | case CmdTx: | ||
1340 | { | ||
1341 | struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr; | ||
1342 | struct sk_buff *skb = tx_cmd->skb; | ||
1343 | |||
1344 | if ((ptr->status) & STAT_OK) { | ||
1345 | DEB(DEB_TXADDR,print_eth(skb->data, "tx-done")); | ||
1346 | } else { | ||
1347 | lp->stats.tx_errors++; | ||
1348 | if ((ptr->status) & 0x0020) | ||
1349 | lp->stats.collisions++; | ||
1350 | if (!((ptr->status) & 0x0040)) | ||
1351 | lp->stats.tx_heartbeat_errors++; | ||
1352 | if ((ptr->status) & 0x0400) | ||
1353 | lp->stats.tx_carrier_errors++; | ||
1354 | if ((ptr->status) & 0x0800) | ||
1355 | lp->stats.collisions++; | ||
1356 | if ((ptr->status) & 0x1000) | ||
1357 | lp->stats.tx_aborted_errors++; | ||
1358 | } | ||
1359 | |||
1360 | dev_kfree_skb_irq(skb); | ||
1361 | |||
1362 | tx_cmd->cmd.command = 0; /* Mark free */ | ||
1363 | break; | ||
1364 | } | ||
1365 | case CmdTDR: | ||
1366 | { | ||
1367 | unsigned short status = ((struct tdr_cmd *)ptr)->status; | ||
1368 | |||
1369 | if (status & 0x8000) { | ||
1370 | DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name)); | ||
1371 | } else { | ||
1372 | if (status & 0x4000) | ||
1373 | printk(KERN_ERR "%s: Transceiver problem.\n", dev->name); | ||
1374 | if (status & 0x2000) | ||
1375 | printk(KERN_ERR "%s: Termination problem.\n", dev->name); | ||
1376 | if (status & 0x1000) | ||
1377 | printk(KERN_ERR "%s: Short circuit.\n", dev->name); | ||
1378 | |||
1379 | DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff)); | ||
1380 | } | ||
1381 | break; | ||
1382 | } | ||
1383 | case CmdConfigure: | ||
1384 | case CmdMulticastList: | ||
1385 | /* Zap command so set_multicast_list() knows it is free */ | ||
1386 | ptr->command = 0; | ||
1387 | break; | ||
1388 | } | ||
1389 | ptr->v_next = ptr->b_next = I596_NULL; | ||
1390 | lp->last_cmd = jiffies; | ||
1391 | } | ||
1392 | |||
1393 | ptr = lp->cmd_head; | ||
1394 | while ((ptr != I596_NULL) && (ptr != lp->cmd_tail)) { | ||
1395 | ptr->command &= 0x1fff; | ||
1396 | ptr = ptr->v_next; | ||
1397 | } | ||
1398 | |||
1399 | if ((lp->cmd_head != I596_NULL)) | ||
1400 | ack_cmd |= CUC_START; | ||
1401 | lp->scb.cmd = WSWAPcmd(virt_to_bus(&lp->cmd_head->status)); | ||
1402 | } | ||
1403 | if ((status & 0x1000) || (status & 0x4000)) { | ||
1404 | if ((status & 0x4000)) | ||
1405 | DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name)); | ||
1406 | i596_rx(dev); | ||
1407 | /* Only RX_START if stopped - RGH 07-07-96 */ | ||
1408 | if (status & 0x1000) { | ||
1409 | if (netif_running(dev)) { | ||
1410 | DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status)); | ||
1411 | ack_cmd |= RX_START; | ||
1412 | lp->stats.rx_errors++; | ||
1413 | lp->stats.rx_fifo_errors++; | ||
1414 | rebuild_rx_bufs(dev); | ||
1415 | } | ||
1416 | } | ||
1417 | } | ||
1418 | wait_cmd(dev,lp,100,"i596 interrupt, timeout"); | ||
1419 | lp->scb.command = ack_cmd; | ||
1420 | |||
1421 | #ifdef ENABLE_MVME16x_NET | ||
1422 | if (MACH_IS_MVME16x) { | ||
1423 | /* Ack the interrupt */ | ||
1424 | |||
1425 | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | ||
1426 | |||
1427 | pcc2[0x2a] |= 0x08; | ||
1428 | } | ||
1429 | #endif | ||
1430 | #ifdef ENABLE_BVME6000_NET | ||
1431 | if (MACH_IS_BVME6000) { | ||
1432 | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | ||
1433 | |||
1434 | *ethirq = 1; | ||
1435 | *ethirq = 3; | ||
1436 | } | ||
1437 | #endif | ||
1438 | #ifdef ENABLE_APRICOT | ||
1439 | (void) inb(ioaddr + 0x10); | ||
1440 | outb(4, ioaddr + 0xf); | ||
1441 | #endif | ||
1442 | CA(dev); | ||
1443 | |||
1444 | DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name)); | ||
1445 | |||
1446 | spin_unlock (&lp->lock); | ||
1447 | return IRQ_RETVAL(handled); | ||
1448 | } | ||
1449 | |||
1450 | static int i596_close(struct net_device *dev) | ||
1451 | { | ||
1452 | struct i596_private *lp = dev->priv; | ||
1453 | unsigned long flags; | ||
1454 | |||
1455 | netif_stop_queue(dev); | ||
1456 | |||
1457 | DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n", | ||
1458 | dev->name, lp->scb.status)); | ||
1459 | |||
1460 | spin_lock_irqsave(&lp->lock, flags); | ||
1461 | |||
1462 | wait_cmd(dev,lp,100,"close1 timed out"); | ||
1463 | lp->scb.command = CUC_ABORT | RX_ABORT; | ||
1464 | CA(dev); | ||
1465 | |||
1466 | wait_cmd(dev,lp,100,"close2 timed out"); | ||
1467 | |||
1468 | spin_unlock_irqrestore(&lp->lock, flags); | ||
1469 | DEB(DEB_STRUCT,i596_display_data(dev)); | ||
1470 | i596_cleanup_cmd(dev,lp); | ||
1471 | |||
1472 | #ifdef ENABLE_MVME16x_NET | ||
1473 | if (MACH_IS_MVME16x) { | ||
1474 | volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000; | ||
1475 | |||
1476 | /* Disable all ints */ | ||
1477 | pcc2[0x28] = 1; | ||
1478 | pcc2[0x2a] = 0x40; | ||
1479 | pcc2[0x2b] = 0x40; /* Set snooping bits now! */ | ||
1480 | } | ||
1481 | #endif | ||
1482 | #ifdef ENABLE_BVME6000_NET | ||
1483 | if (MACH_IS_BVME6000) { | ||
1484 | volatile unsigned char *ethirq = (unsigned char *) BVME_ETHIRQ_REG; | ||
1485 | |||
1486 | *ethirq = 1; | ||
1487 | } | ||
1488 | #endif | ||
1489 | |||
1490 | free_irq(dev->irq, dev); | ||
1491 | remove_rx_bufs(dev); | ||
1492 | |||
1493 | return 0; | ||
1494 | } | ||
1495 | |||
1496 | static struct net_device_stats * | ||
1497 | i596_get_stats(struct net_device *dev) | ||
1498 | { | ||
1499 | struct i596_private *lp = dev->priv; | ||
1500 | |||
1501 | return &lp->stats; | ||
1502 | } | ||
1503 | |||
1504 | /* | ||
1505 | * Set or clear the multicast filter for this adaptor. | ||
1506 | */ | ||
1507 | |||
1508 | static void set_multicast_list(struct net_device *dev) | ||
1509 | { | ||
1510 | struct i596_private *lp = dev->priv; | ||
1511 | int config = 0, cnt; | ||
1512 | |||
1513 | DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n", | ||
1514 | dev->name, dev->mc_count, | ||
1515 | dev->flags & IFF_PROMISC ? "ON" : "OFF", | ||
1516 | dev->flags & IFF_ALLMULTI ? "ON" : "OFF")); | ||
1517 | |||
1518 | if (wait_cfg(dev, &lp->cf_cmd.cmd, 1000, "config change request timed out")) | ||
1519 | return; | ||
1520 | |||
1521 | if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) { | ||
1522 | lp->cf_cmd.i596_config[8] |= 0x01; | ||
1523 | config = 1; | ||
1524 | } | ||
1525 | if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) { | ||
1526 | lp->cf_cmd.i596_config[8] &= ~0x01; | ||
1527 | config = 1; | ||
1528 | } | ||
1529 | if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) { | ||
1530 | lp->cf_cmd.i596_config[11] &= ~0x20; | ||
1531 | config = 1; | ||
1532 | } | ||
1533 | if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) { | ||
1534 | lp->cf_cmd.i596_config[11] |= 0x20; | ||
1535 | config = 1; | ||
1536 | } | ||
1537 | if (config) { | ||
1538 | lp->cf_cmd.cmd.command = CmdConfigure; | ||
1539 | i596_add_cmd(dev, &lp->cf_cmd.cmd); | ||
1540 | } | ||
1541 | |||
1542 | cnt = dev->mc_count; | ||
1543 | if (cnt > MAX_MC_CNT) | ||
1544 | { | ||
1545 | cnt = MAX_MC_CNT; | ||
1546 | printk(KERN_ERR "%s: Only %d multicast addresses supported", | ||
1547 | dev->name, cnt); | ||
1548 | } | ||
1549 | |||
1550 | if (dev->mc_count > 0) { | ||
1551 | struct dev_mc_list *dmi; | ||
1552 | unsigned char *cp; | ||
1553 | struct mc_cmd *cmd; | ||
1554 | |||
1555 | if (wait_cfg(dev, &lp->mc_cmd.cmd, 1000, "multicast list change request timed out")) | ||
1556 | return; | ||
1557 | cmd = &lp->mc_cmd; | ||
1558 | cmd->cmd.command = CmdMulticastList; | ||
1559 | cmd->mc_cnt = dev->mc_count * 6; | ||
1560 | cp = cmd->mc_addrs; | ||
1561 | for (dmi = dev->mc_list; cnt && dmi != NULL; dmi = dmi->next, cnt--, cp += 6) { | ||
1562 | memcpy(cp, dmi->dmi_addr, 6); | ||
1563 | if (i596_debug > 1) | ||
1564 | DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %02x:%02x:%02x:%02x:%02x:%02x\n", | ||
1565 | dev->name, cp[0],cp[1],cp[2],cp[3],cp[4],cp[5])); | ||
1566 | } | ||
1567 | i596_add_cmd(dev, &cmd->cmd); | ||
1568 | } | ||
1569 | } | ||
1570 | |||
1571 | #ifdef MODULE | ||
1572 | static struct net_device *dev_82596; | ||
1573 | |||
1574 | #ifdef ENABLE_APRICOT | ||
1575 | module_param(irq, int, 0); | ||
1576 | MODULE_PARM_DESC(irq, "Apricot IRQ number"); | ||
1577 | #endif | ||
1578 | |||
1579 | static int debug = -1; | ||
1580 | module_param(debug, int, 0); | ||
1581 | MODULE_PARM_DESC(debug, "i82596 debug mask"); | ||
1582 | |||
1583 | int init_module(void) | ||
1584 | { | ||
1585 | if (debug >= 0) | ||
1586 | i596_debug = debug; | ||
1587 | dev_82596 = i82596_probe(-1); | ||
1588 | if (IS_ERR(dev_82596)) | ||
1589 | return PTR_ERR(dev_82596); | ||
1590 | return 0; | ||
1591 | } | ||
1592 | |||
1593 | void cleanup_module(void) | ||
1594 | { | ||
1595 | unregister_netdev(dev_82596); | ||
1596 | #ifdef __mc68000__ | ||
1597 | /* XXX This assumes default cache mode to be IOMAP_FULL_CACHING, | ||
1598 | * XXX which may be invalid (CONFIG_060_WRITETHROUGH) | ||
1599 | */ | ||
1600 | |||
1601 | kernel_set_cachemode((void *)(dev_82596->mem_start), 4096, | ||
1602 | IOMAP_FULL_CACHING); | ||
1603 | #endif | ||
1604 | free_page ((u32)(dev_82596->mem_start)); | ||
1605 | #ifdef ENABLE_APRICOT | ||
1606 | /* If we don't do this, we can't re-insmod it later. */ | ||
1607 | release_region(dev_82596->base_addr, I596_TOTAL_SIZE); | ||
1608 | #endif | ||
1609 | free_netdev(dev_82596); | ||
1610 | } | ||
1611 | |||
1612 | #endif /* MODULE */ | ||
1613 | |||
1614 | /* | ||
1615 | * Local variables: | ||
1616 | * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c 82596.c" | ||
1617 | * End: | ||
1618 | */ | ||