aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/7990.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/7990.h
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/7990.h')
-rw-r--r--drivers/net/7990.h256
1 files changed, 256 insertions, 0 deletions
diff --git a/drivers/net/7990.h b/drivers/net/7990.h
new file mode 100644
index 000000000000..31ae5099738d
--- /dev/null
+++ b/drivers/net/7990.h
@@ -0,0 +1,256 @@
1/*
2 * 7990.h -- LANCE ethernet IC generic routines.
3 * This is an attempt to separate out the bits of various ethernet
4 * drivers that are common because they all use the AMD 7990 LANCE
5 * (Local Area Network Controller for Ethernet) chip.
6 *
7 * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
8 *
9 * Most of this stuff was obtained by looking at other LANCE drivers,
10 * in particular a2065.[ch]. The AMD C-LANCE datasheet was also helpful.
11 */
12
13#ifndef _7990_H
14#define _7990_H
15
16/* The lance only has two register locations. We communicate mostly via memory. */
17#define LANCE_RDP 0 /* Register Data Port */
18#define LANCE_RAP 2 /* Register Address Port */
19
20/* Transmit/receive ring definitions.
21 * We allow the specific drivers to override these defaults if they want to.
22 * NB: according to lance.c, increasing the number of buffers is a waste
23 * of space and reduces the chance that an upper layer will be able to
24 * reorder queued Tx packets based on priority. [Clearly there is a minimum
25 * limit too: too small and we drop rx packets and can't tx at full speed.]
26 * 4+4 seems to be the usual setting; the atarilance driver uses 3 and 5.
27 */
28
29/* Blast! This won't work. The problem is that we can't specify a default
30 * setting because that would cause the lance_init_block struct to be
31 * too long (and overflow the RAM on shared-memory cards like the HP LANCE.
32 */
33#ifndef LANCE_LOG_TX_BUFFERS
34#define LANCE_LOG_TX_BUFFERS 1
35#define LANCE_LOG_RX_BUFFERS 3
36#endif
37
38#define TX_RING_SIZE (1<<LANCE_LOG_TX_BUFFERS)
39#define RX_RING_SIZE (1<<LANCE_LOG_RX_BUFFERS)
40#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
41#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
42#define TX_RING_LEN_BITS ((LANCE_LOG_TX_BUFFERS) << 29)
43#define RX_RING_LEN_BITS ((LANCE_LOG_RX_BUFFERS) << 29)
44#define PKT_BUFF_SIZE (1544)
45#define RX_BUFF_SIZE PKT_BUFF_SIZE
46#define TX_BUFF_SIZE PKT_BUFF_SIZE
47
48/* Each receive buffer is described by a receive message descriptor (RMD) */
49struct lance_rx_desc {
50 volatile unsigned short rmd0; /* low address of packet */
51 volatile unsigned char rmd1_bits; /* descriptor bits */
52 volatile unsigned char rmd1_hadr; /* high address of packet */
53 volatile short length; /* This length is 2s complement (negative)!
54 * Buffer length
55 */
56 volatile unsigned short mblength; /* Actual number of bytes received */
57};
58
59/* Ditto for TMD: */
60struct lance_tx_desc {
61 volatile unsigned short tmd0; /* low address of packet */
62 volatile unsigned char tmd1_bits; /* descriptor bits */
63 volatile unsigned char tmd1_hadr; /* high address of packet */
64 volatile short length; /* Length is 2s complement (negative)! */
65 volatile unsigned short misc;
66};
67
68/* There are three memory structures accessed by the LANCE:
69 * the initialization block, the receive and transmit descriptor rings,
70 * and the data buffers themselves. In fact we might as well put the
71 * init block,the Tx and Rx rings and the buffers together in memory:
72 */
73struct lance_init_block {
74 volatile unsigned short mode; /* Pre-set mode (reg. 15) */
75 volatile unsigned char phys_addr[6]; /* Physical ethernet address */
76 volatile unsigned filter[2]; /* Multicast filter (64 bits) */
77
78 /* Receive and transmit ring base, along with extra bits. */
79 volatile unsigned short rx_ptr; /* receive descriptor addr */
80 volatile unsigned short rx_len; /* receive len and high addr */
81 volatile unsigned short tx_ptr; /* transmit descriptor addr */
82 volatile unsigned short tx_len; /* transmit len and high addr */
83
84 /* The Tx and Rx ring entries must be aligned on 8-byte boundaries.
85 * This will be true if this whole struct is 8-byte aligned.
86 */
87 volatile struct lance_tx_desc btx_ring[TX_RING_SIZE];
88 volatile struct lance_rx_desc brx_ring[RX_RING_SIZE];
89
90 volatile char tx_buf [TX_RING_SIZE][TX_BUFF_SIZE];
91 volatile char rx_buf [RX_RING_SIZE][RX_BUFF_SIZE];
92 /* we use this just to make the struct big enough that we can move its startaddr
93 * in order to force alignment to an eight byte boundary.
94 */
95};
96
97/* This is where we keep all the stuff the driver needs to know about.
98 * I'm definitely unhappy about the mechanism for allowing specific
99 * drivers to add things...
100 */
101struct lance_private
102{
103 char *name;
104 unsigned long base;
105 volatile struct lance_init_block *init_block; /* CPU address of RAM */
106 volatile struct lance_init_block *lance_init_block; /* LANCE address of RAM */
107
108 int rx_new, tx_new;
109 int rx_old, tx_old;
110
111 int lance_log_rx_bufs, lance_log_tx_bufs;
112 int rx_ring_mod_mask, tx_ring_mod_mask;
113
114 struct net_device_stats stats;
115 int tpe; /* TPE is selected */
116 int auto_select; /* cable-selection is by carrier */
117 unsigned short busmaster_regval;
118
119 unsigned int irq; /* IRQ to register */
120
121 /* This is because the HP LANCE is disgusting and you have to check
122 * a DIO-specific register every time you read/write the LANCE regs :-<
123 * [could we get away with making these some sort of macro?]
124 */
125 void (*writerap)(void *, unsigned short);
126 void (*writerdp)(void *, unsigned short);
127 unsigned short (*readrdp)(void *);
128 spinlock_t devlock;
129 char tx_full;
130};
131
132/*
133 * Am7990 Control and Status Registers
134 */
135#define LE_CSR0 0x0000 /* LANCE Controller Status */
136#define LE_CSR1 0x0001 /* IADR[15:0] (bit0==0 ie word aligned) */
137#define LE_CSR2 0x0002 /* IADR[23:16] (high bits reserved) */
138#define LE_CSR3 0x0003 /* Misc */
139
140/*
141 * Bit definitions for CSR0 (LANCE Controller Status)
142 */
143#define LE_C0_ERR 0x8000 /* Error = BABL | CERR | MISS | MERR */
144#define LE_C0_BABL 0x4000 /* Babble: Transmitted too many bits */
145#define LE_C0_CERR 0x2000 /* No Heartbeat (10BASE-T) */
146#define LE_C0_MISS 0x1000 /* Missed Frame (no rx buffer to put it in) */
147#define LE_C0_MERR 0x0800 /* Memory Error */
148#define LE_C0_RINT 0x0400 /* Receive Interrupt */
149#define LE_C0_TINT 0x0200 /* Transmit Interrupt */
150#define LE_C0_IDON 0x0100 /* Initialization Done */
151#define LE_C0_INTR 0x0080 /* Interrupt Flag
152 = BABL | MISS | MERR | RINT | TINT | IDON */
153#define LE_C0_INEA 0x0040 /* Interrupt Enable */
154#define LE_C0_RXON 0x0020 /* Receive On */
155#define LE_C0_TXON 0x0010 /* Transmit On */
156#define LE_C0_TDMD 0x0008 /* Transmit Demand */
157#define LE_C0_STOP 0x0004 /* Stop */
158#define LE_C0_STRT 0x0002 /* Start */
159#define LE_C0_INIT 0x0001 /* Initialize */
160
161
162/*
163 * Bit definitions for CSR3
164 */
165#define LE_C3_BSWP 0x0004 /* Byte Swap
166 (on for big endian byte order) */
167#define LE_C3_ACON 0x0002 /* ALE Control
168 (on for active low ALE) */
169#define LE_C3_BCON 0x0001 /* Byte Control */
170
171
172/*
173 * Mode Flags
174 */
175#define LE_MO_PROM 0x8000 /* Promiscuous Mode */
176/* these next ones 0x4000 -- 0x0080 are not available on the LANCE 7990,
177 * but they are in NetBSD's am7990.h, presumably for backwards-compatible chips
178 */
179#define LE_MO_DRCVBC 0x4000 /* disable receive broadcast */
180#define LE_MO_DRCVPA 0x2000 /* disable physical address detection */
181#define LE_MO_DLNKTST 0x1000 /* disable link status */
182#define LE_MO_DAPC 0x0800 /* disable automatic polarity correction */
183#define LE_MO_MENDECL 0x0400 /* MENDEC loopback mode */
184#define LE_MO_LRTTSEL 0x0200 /* lower RX threshold / TX mode selection */
185#define LE_MO_PSEL1 0x0100 /* port selection bit1 */
186#define LE_MO_PSEL0 0x0080 /* port selection bit0 */
187/* and this one is from the C-LANCE data sheet... */
188#define LE_MO_EMBA 0x0080 /* Enable Modified Backoff Algorithm
189 (C-LANCE, not original LANCE) */
190#define LE_MO_INTL 0x0040 /* Internal Loopback */
191#define LE_MO_DRTY 0x0020 /* Disable Retry */
192#define LE_MO_FCOLL 0x0010 /* Force Collision */
193#define LE_MO_DXMTFCS 0x0008 /* Disable Transmit CRC */
194#define LE_MO_LOOP 0x0004 /* Loopback Enable */
195#define LE_MO_DTX 0x0002 /* Disable Transmitter */
196#define LE_MO_DRX 0x0001 /* Disable Receiver */
197
198
199/*
200 * Receive Flags
201 */
202#define LE_R1_OWN 0x80 /* LANCE owns the descriptor */
203#define LE_R1_ERR 0x40 /* Error */
204#define LE_R1_FRA 0x20 /* Framing Error */
205#define LE_R1_OFL 0x10 /* Overflow Error */
206#define LE_R1_CRC 0x08 /* CRC Error */
207#define LE_R1_BUF 0x04 /* Buffer Error */
208#define LE_R1_SOP 0x02 /* Start of Packet */
209#define LE_R1_EOP 0x01 /* End of Packet */
210#define LE_R1_POK 0x03 /* Packet is complete: SOP + EOP */
211
212
213/*
214 * Transmit Flags
215 */
216#define LE_T1_OWN 0x80 /* LANCE owns the descriptor */
217#define LE_T1_ERR 0x40 /* Error */
218#define LE_T1_RES 0x20 /* Reserved, LANCE writes this with a zero */
219#define LE_T1_EMORE 0x10 /* More than one retry needed */
220#define LE_T1_EONE 0x08 /* One retry needed */
221#define LE_T1_EDEF 0x04 /* Deferred */
222#define LE_T1_SOP 0x02 /* Start of Packet */
223#define LE_T1_EOP 0x01 /* End of Packet */
224#define LE_T1_POK 0x03 /* Packet is complete: SOP + EOP */
225
226/*
227 * Error Flags
228 */
229#define LE_T3_BUF 0x8000 /* Buffer Error */
230#define LE_T3_UFL 0x4000 /* Underflow Error */
231#define LE_T3_LCOL 0x1000 /* Late Collision */
232#define LE_T3_CLOS 0x0800 /* Loss of Carrier */
233#define LE_T3_RTY 0x0400 /* Retry Error */
234#define LE_T3_TDR 0x03ff /* Time Domain Reflectometry */
235
236/* Miscellaneous useful macros */
237
238#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
239 lp->tx_old+lp->tx_ring_mod_mask-lp->tx_new:\
240 lp->tx_old - lp->tx_new-1)
241
242/* The LANCE only uses 24 bit addresses. This does the obvious thing. */
243#define LANCE_ADDR(x) ((int)(x) & ~0xff000000)
244
245/* Now the prototypes we export */
246extern int lance_open(struct net_device *dev);
247extern int lance_close (struct net_device *dev);
248extern int lance_start_xmit (struct sk_buff *skb, struct net_device *dev);
249extern struct net_device_stats *lance_get_stats (struct net_device *dev);
250extern void lance_set_multicast (struct net_device *dev);
251extern void lance_tx_timeout(struct net_device *dev);
252#ifdef CONFIG_NET_POLL_CONTROLLER
253extern void lance_poll(struct net_device *dev);
254#endif
255
256#endif /* ndef _7990_H */