powerpc/85xx: Rework P1022DS device tree

Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:

* Reworked PCIe nodes to allow supportin IRQs for controller (errors)
  and moved PCI device IRQs down to virtual bridge level
* Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the
  'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum
* Updated spi node to new espi binding specification
* Renamed SDHC node from 'sdhci' to 'sdhc'
* Added usb node for 2nd usb controller
* Dropping "fsl,p1022-IP..." from compatibles for standard blocks
* Fixed bug in local bus range node for CS2, was maping to
  0x0 0x0xffa00000 instead of 0xf 0xffa00000
* Fixed localbus reg property should have been 0xf 0xffe05000

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Timur Tabi <timur@freescale.com>

1 files changed, 235 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
new file mode 100644
index 000000000000..16239b199d0a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -0,0 +1,235 @@
+/*
+ * P1022/P1013 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+        interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x9000 */
+&pci0 {
+        compatible = "fsl,p1022-pcie";
+        device_type = "pci";
+        #size-cells = <2>;
+        #address-cells = <3>;
+        bus-range = <0 255>;
+        clock-frequency = <33333333>;
+        interrupts = <16 2 0 0>;
+
+        pcie@0 {
+                reg = <0 0 0 0 0>;
+                #interrupt-cells = <1>;
+                #size-cells = <2>;
+                #address-cells = <3>;
+                device_type = "pci";
+                interrupts = <16 2 0 0>;
+                interrupt-map-mask = <0xf800 0 0 7>;
+                interrupt-map = <
+                        /* IDSEL 0x0 */
+                        0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+                        0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+                        0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+                        0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+                        >;
+        };
+};
+
+/* controller at 0xa000 */
+&pci1 {
+        compatible = "fsl,p1022-pcie";
+        device_type = "pci";
+        #size-cells = <2>;
+        #address-cells = <3>;
+        bus-range = <0 255>;
+        clock-frequency = <33333333>;
+        interrupts = <16 2 0 0>;
+
+        pcie@0 {
+                reg = <0 0 0 0 0>;
+                #interrupt-cells = <1>;
+                #size-cells = <2>;
+                #address-cells = <3>;
+                device_type = "pci";
+                interrupts = <16 2 0 0>;
+                interrupt-map-mask = <0xf800 0 0 7>;
+
+                interrupt-map = <
+                        /* IDSEL 0x0 */
+                        0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+                        0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+                        0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+                        0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+                        >;
+        };
+};
+
+/* controller at 0xb000 */
+&pci2 {
+        compatible = "fsl,p1022-pcie";
+        device_type = "pci";
+        #size-cells = <2>;
+        #address-cells = <3>;
+        bus-range = <0 255>;
+        clock-frequency = <33333333>;
+        interrupts = <16 2 0 0>;
+
+        pcie@0 {
+                reg = <0 0 0 0 0>;
+                #interrupt-cells = <1>;
+                #size-cells = <2>;
+                #address-cells = <3>;
+                device_type = "pci";
+                interrupts = <16 2 0 0>;
+                interrupt-map-mask = <0xf800 0 0 7>;
+
+                interrupt-map = <
+                        /* IDSEL 0x0 */
+                        0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+                        0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+                        0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+                        0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+                        >;
+        };
+};
+
+&soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        device_type = "soc";
+        compatible = "fsl,p1022-immr", "simple-bus";
+        bus-frequency = <0>;            // Filled out by uboot.
+
+        ecm-law@0 {
+                compatible = "fsl,ecm-law";
+                reg = <0x0 0x1000>;
+                fsl,num-laws = <12>;
+        };
+
+        ecm@1000 {
+                compatible = "fsl,p1022-ecm", "fsl,ecm";
+                reg = <0x1000 0x1000>;
+                interrupts = <16 2 0 0>;
+        };
+
+        memory-controller@2000 {
+                compatible = "fsl,p1022-memory-controller";
+                reg = <0x2000 0x1000>;
+                interrupts = <16 2 0 0>;
+        };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-espi-0.dtsi"
+        spi@7000 {
+                fsl,espi-num-chipselects = <4>;
+        };
+
+/include/ "pq3-dma-1.dtsi"
+        dma@c300 {
+                dma00: dma-channel@0 {
+                        compatible = "fsl,ssi-dma-channel";
+                };
+                dma01: dma-channel@80 {
+                        compatible = "fsl,ssi-dma-channel";
+                };
+        };
+
+/include/ "pq3-gpio-0.dtsi"
+
+        display@10000 {
+                compatible = "fsl,diu", "fsl,p1022-diu";
+                reg = <0x10000 1000>;
+                interrupts = <64 2 0 0>;
+        };
+
+        ssi@15000 {
+                compatible = "fsl,mpc8610-ssi";
+                cell-index = <0>;
+                reg = <0x15000 0x100>;
+                interrupts = <75 2 0 0>;
+                fsl,playback-dma = <&dma00>;
+                fsl,capture-dma = <&dma01>;
+                fsl,fifo-depth = <15>;
+        };
+
+/include/ "pq3-sata2-0.dtsi"
+/include/ "pq3-sata2-1.dtsi"
+
+        L2: l2-cache-controller@20000 {
+                compatible = "fsl,p1022-l2-cache-controller";
+                reg = <0x20000 0x1000>;
+                cache-line-size = <32>; // 32 bytes
+                cache-size = <0x40000>; // L2,256K
+                interrupts = <16 2 0 0>;
+        };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-usb2-dr-0.dtsi"
+/include/ "pq3-usb2-dr-1.dtsi"
+
+/include/ "pq3-esdhc-0.dtsi"
+        sdhc@2e000 {
+                fsl,sdhci-auto-cmd12;
+        };
+
+/include/ "pq3-sec3.3-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+        enet0: enet0_grp2: ethernet@b0000 {
+        };
+
+/include/ "pq3-etsec2-1.dtsi"
+        enet1: enet1_grp2: ethernet@b1000 {
+        };
+
+        global-utilities@e0000 {
+                compatible = "fsl,p1022-guts";
+                reg = <0xe0000 0x1000>;
+                fsl,has-rstcr;
+        };
+
+        power@e0070{
+                compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+                reg = <0xe0070 0x20>;
+        };
+
+};
+
+/include/ "pq3-etsec2-grp2-0.dtsi"
+/include/ "pq3-etsec2-grp2-1.dtsi"