Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] fix build-breaking 7a192ec commit
  ARM: Add SMSC911X support to Overo platform (V2)
  arm: update omap_ldp defconfig to use smsc911x
  arm: update realview defconfigs to use smsc911x
  arm: update pcm037 defconfig to use smsc911x
  arm: convert omap ldp platform to use smsc911x
  arm: convert realview platform to use smsc911x
  arm: convert pcm037 platform to use smsc911x
  [ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
  [ARM] 5442/1: pxa/cm-x255: fix reverse RDY gpios in PCMCIA driver
  [ARM] 5441/1: Use pr_err on error paths in at91 pm
  [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
  [ARM] 5439/1: Do not clear bit 10 of DFSR during abort handling on ARMv6
  [ARM] 5437/1: Add documentation for "nohlt" kernel parameter
  [ARM] 5436/1: ARM: OMAP: Fix compile for rx51
  [ARM] arch_reset() now takes a second parameter
  [ARM] Kirkwood: small L2 code cleanup
  [ARM] Kirkwood: invalidate L2 cache before enabling it

18 files changed, 256 insertions, 60 deletions

diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index aa9d34feddc6..679a4a3e265e 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -474,14 +474,34 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig
index 627474586470..6e37c77c4760 100644
--- a/arch/arm/configs/pcm037_defconfig
+++ b/arch/arm/configs/pcm037_defconfig
@@ -465,12 +465,33 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index cd29824d791c..21db4b3ec8ff 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -496,13 +496,33 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 7e253f58ed18..9a75c30b910d 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -490,13 +490,33 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 7ac812dc055a..e26c4fe61fae 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -198,17 +198,17 @@ static int at91_pm_verify_clocks(void)
         /* USB must not be using PLLB */
         if (cpu_is_at91rm9200()) {
                 if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
-                        pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+                        pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
                         return 0;
                 }
         } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
                 if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
-                        pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+                        pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
                         return 0;
                 }
         } else if (cpu_is_at91cap9()) {
                 if ((scsr & AT91CAP9_PMC_UHP) != 0) {
-                        pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+                        pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
                         return 0;
                 }
         }
@@ -223,7 +223,7 @@ static int at91_pm_verify_clocks(void)
 
                 css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
                 if (css != AT91_PMC_CSS_SLOW) {
-                        pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
+                        pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
                         return 0;
                 }
         }
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index bbbd72767a02..4d9c1f872472 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -28,7 +28,7 @@ static inline void arch_idle(void)
         cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
         __raw_writel(RESET_GLOBAL | RESET_CPU1,
                      IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 001edfefec19..4f5b0e0ce6cf 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -14,7 +14,7 @@ static inline void arch_idle(void)
         cpu_do_idle();
 }
 
-static inline void arch_reset(char mode)
+static inline void arch_reset(char mode, const char *cmd)
 {
         cpu_reset(0);
 }
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 5fce022114de..c3648eff5137 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -24,7 +24,7 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
@@ -70,7 +70,7 @@ static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
         [0] = {
                 .start          = CS1_BASE_ADDR + 0x300,
                 .end            = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
@@ -79,22 +79,25 @@ static struct resource smc911x_resources[] = {
         [1] = {
                 .start          = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
                 .end            = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-                .flags          = IORESOURCE_IRQ,
+                .flags          = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
         },
 };
 
-static struct smc911x_platdata smc911x_info = {
-        .flags          = SMC911X_USE_32BIT,
-        .irq_flags      = IRQF_SHARED | IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_info = {
+        .flags          = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
+                          SMSC911X_SAVE_MAC_ADDRESS,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device pcm037_eth = {
-        .name           = "smc911x",
+        .name           = "smsc911x",
         .id             = -1,
-        .num_resources  = ARRAY_SIZE(smc911x_resources),
-        .resource       = smc911x_resources,
+        .num_resources  = ARRAY_SIZE(smsc911x_resources),
+        .resource       = smsc911x_resources,
         .dev            = {
-                .platform_data = &smc911x_info,
+                .platform_data = &smsc911x_info,
         },
 };
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a2c3fcc27a22..c49d9bfa3abd 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -47,6 +47,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 
 obj-$(CONFIG_MACH_NOKIA_RX51)           += board-rx51.o \
                                            board-rx51-peripherals.o \
+                                           mmc-twl4030.o
+
 # Platform specific device init code
 ifeq ($(CONFIG_USB_MUSB_SOC),y)
 obj-y                                   += usb-musb.o
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index e096f776f996..da57b0fcda14 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -23,6 +23,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/io.h>
+#include <linux/smsc911x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -41,12 +42,12 @@
 
 #include "mmc-twl4030.h"
 
-#define LDP_SMC911X_CS          1
-#define LDP_SMC911X_GPIO        152
+#define LDP_SMSC911X_CS         1
+#define LDP_SMSC911X_GPIO       152
 #define DEBUG_BASE              0x08000000
 #define LDP_ETHR_START          DEBUG_BASE
 
-static struct resource ldp_smc911x_resources[] = {
+static struct resource ldp_smsc911x_resources[] = {
         [0] = {
                 .start  = LDP_ETHR_START,
                 .end    = LDP_ETHR_START + SZ_4K,
@@ -59,40 +60,50 @@ static struct resource ldp_smc911x_resources[] = {
         },
 };
 
-static struct platform_device ldp_smc911x_device = {
-        .name           = "smc911x",
+static struct smsc911x_platform_config ldp_smsc911x_config = {
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .flags          = SMSC911X_USE_32BIT,
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device ldp_smsc911x_device = {
+        .name           = "smsc911x",
         .id             = -1,
-        .num_resources  = ARRAY_SIZE(ldp_smc911x_resources),
-        .resource       = ldp_smc911x_resources,
+        .num_resources  = ARRAY_SIZE(ldp_smsc911x_resources),
+        .resource       = ldp_smsc911x_resources,
+        .dev            = {
+                .platform_data = &ldp_smsc911x_config,
+        },
 };
 
 static struct platform_device *ldp_devices[] __initdata = {
-        &ldp_smc911x_device,
+        &ldp_smsc911x_device,
 };
 
-static inline void __init ldp_init_smc911x(void)
+static inline void __init ldp_init_smsc911x(void)
 {
         int eth_cs;
         unsigned long cs_mem_base;
         int eth_gpio = 0;
 
-        eth_cs = LDP_SMC911X_CS;
+        eth_cs = LDP_SMSC911X_CS;
 
         if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-                printk(KERN_ERR "Failed to request GPMC mem for smc911x\n");
+                printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
                 return;
         }
 
-        ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-        ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
+        ldp_smsc911x_resources[0].start = cs_mem_base + 0x0;
+        ldp_smsc911x_resources[0].end   = cs_mem_base + 0xff;
         udelay(100);
 
-        eth_gpio = LDP_SMC911X_GPIO;
+        eth_gpio = LDP_SMSC911X_GPIO;
 
-        ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+        ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-        if (gpio_request(eth_gpio, "smc911x irq") < 0) {
-                printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+        if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+                printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
                                 eth_gpio);
                 return;
         }
@@ -104,7 +115,7 @@ static void __init omap_ldp_init_irq(void)
         omap2_init_common_hw(NULL);
         omap_init_irq();
         omap_gpio_init();
-        ldp_init_smc911x();
+        ldp_init_smsc911x();
 }
 
 static struct omap_uart_config ldp_uart_config __initdata = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b3f6e9d81807..b1f23bea863f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -57,6 +57,9 @@
 #define GPMC_CS0_BASE  0x60
 #define GPMC_CS_SIZE   0x30
 
+#define OVERO_SMSC911X_CS      5
+#define OVERO_SMSC911X_GPIO    176
+
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
         defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
@@ -116,6 +119,67 @@ static void __init overo_ads7846_init(void)
 static inline void __init overo_ads7846_init(void) { return; }
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+
+static struct resource overo_smsc911x_resources[] = {
+        {
+                .name   = "smsc911x-memory",
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+        },
+};
+
+static struct smsc911x_platform_config overo_smsc911x_config = {
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .flags          = SMSC911X_USE_32BIT ,
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device overo_smsc911x_device = {
+        .name           = "smsc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(overo_smsc911x_resources),
+        .resource       = &overo_smsc911x_resources,
+        .dev            = {
+                .platform_data = &overo_smsc911x_config,
+        },
+};
+
+static inline void __init overo_init_smsc911x(void)
+{
+        unsigned long cs_mem_base;
+
+        if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+                printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
+                return;
+        }
+
+        overo_smsc911x_resources[0].start = cs_mem_base + 0x0;
+        overo_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+        if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
+            (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) {
+                gpio_export(OVERO_SMSC911X_GPIO, 0);
+        } else {
+                printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n");
+                return;
+        }
+
+        overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
+        overo_smsc911x_resources[1].end   = 0;
+
+        platform_device_register(&overo_smsc911x_device);
+}
+
+#else
+static inline void __init overo_init_smsc911x(void) { return; }
+#endif
+
 static struct mtd_partition overo_nand_partitions[] = {
         {
                 .name           = "xloader",
@@ -290,6 +354,7 @@ static void __init overo_init(void)
         overo_flash_init();
         usb_musb_init();
         overo_ads7846_init();
+        overo_init_smsc911x();
 
         if ((gpio_request(OVERO_GPIO_W2W_NRESET,
                           "OVERO_GPIO_W2W_NRESET") == 0) &&
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index d6766685cfc7..9ab947c14f26 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -28,7 +28,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
 
 #include <asm/clkdev.h>
@@ -128,14 +128,15 @@ int realview_flash_register(struct resource *res, u32 num)
         return platform_device_register(&realview_flash_device);
 }
 
-static struct smc911x_platdata realview_smc911x_platdata = {
-        .flags          = SMC911X_USE_32BIT,
-        .irq_flags      = IRQF_SHARED,
-        .irq_polarity   = 1,
+static struct smsc911x_platform_config smsc911x_config = {
+        .flags          = SMSC911X_USE_32BIT,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+        .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
 };
 
 static struct platform_device realview_eth_device = {
-        .name           = "smc911x",
+        .name           = "smsc911x",
         .id             = 0,
         .num_resources  = 2,
 };
@@ -145,8 +146,8 @@ int realview_eth_register(const char *name, struct resource *res)
         if (name)
                 realview_eth_device.name = name;
         realview_eth_device.resource = res;
-        if (strcmp(realview_eth_device.name, "smc911x") == 0)
-                realview_eth_device.dev.platform_data = &realview_smc911x_platdata;
+        if (strcmp(realview_eth_device.name, "smsc911x") == 0)
+                realview_eth_device.dev.platform_data = &smsc911x_config;
 
         return platform_device_register(&realview_eth_device);
 }
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 67d6d9cc68b2..d0d39adf6407 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -191,6 +191,7 @@ void __cpuinit local_timer_setup(void)
         clk->name               = "dummy_timer";
         clk->features           = CLOCK_EVT_FEAT_DUMMY;
         clk->rating             = 200;
+        clk->mult               = 1;
         clk->set_mode           = dummy_timer_set_mode;
         clk->broadcast          = smp_timer_broadcast;
         clk->cpumask            = cpumask_of(cpu);
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 94077fbd96b7..6f7e70907e44 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -29,10 +29,10 @@ ENTRY(v6_early_abort)
         mrc     p15, 0, r1, c5, c0, 0           @ get FSR
         mrc     p15, 0, r0, c6, c0, 0           @ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
  * The test below covers all the write situations, including Java bytecodes
  */
-        bic     r1, r1, #1 << 11 | 1 << 10      @ clear bits 11 and 10 of FSR
+        bic     r1, r1, #1 << 11                @ clear bit 11 of FSR
         tst     r3, #PSR_J_BIT                  @ Java?
         movne   pc, lr
         do_thumb_abort
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index d6dd83826f8a..6e77c042d8e9 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -115,6 +115,10 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
         raw_local_irq_restore(flags);
 }
 
+static inline void l2_inv_all(void)
+{
+        __asm__("mcr p15, 1, %0, c15, c11, 0" : : "r" (0));
+}
 
 /*
  * Linux primitives.
@@ -254,9 +258,7 @@ static void __init enable_dcache(void)
 
 static void __init __invalidate_icache(void)
 {
-        int dummy;
-
-        __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 0" : "=r" (dummy));
+        __asm__("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
 }
 
 static int __init invalidate_and_disable_icache(void)
@@ -321,6 +323,7 @@ static void __init enable_l2(void)
 
                 d = flush_and_disable_dcache();
                 i = invalidate_and_disable_icache();
+                l2_inv_all();
                 write_extra_features(u | 0x00400000);
                 if (i)
                         enable_icache();
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index ba592a9e6fb3..a2bed62aec21 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -15,13 +15,16 @@
  *  r10 = thread_info structure
  *  lr  = failure return
  */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/assembler.h>
+#include <asm/thread_info.h>
 #include <asm/vfpmacros.h>
+#include "../kernel/entry-header.S"
 
 ENTRY(do_vfp)
+#ifdef CONFIG_PREEMPT
+        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
+        add     r11, r4, #1             @ increment it
+        str     r11, [r10, #TI_PREEMPT]
+#endif
         enable_irq
         ldr     r4, .LCvfp
         ldr     r11, [r10, #TI_CPU]     @ CPU number
@@ -30,6 +33,12 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
+#ifdef CONFIG_PREEMPT
+        get_thread_info r10
+        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
+        sub     r11, r4, #1             @ decrement it
+        str     r11, [r10, #TI_PREEMPT]
+#endif
         mov     pc, lr
 ENDPROC(vfp_null_entry)
 
@@ -41,6 +50,12 @@ ENDPROC(vfp_null_entry)
 
         __INIT
 ENTRY(vfp_testing_entry)
+#ifdef CONFIG_PREEMPT
+        get_thread_info r10
+        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
+        sub     r11, r4, #1             @ decrement it
+        str     r11, [r10, #TI_PREEMPT]
+#endif
         ldr     r0, VFP_arch_address
         str     r5, [r0]                @ known non-zero value
         mov     pc, r9                  @ we have handled the fault
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index a5a4e57763c3..83c4e384b16d 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -137,6 +137,12 @@ check_for_exception:
         VFPFMXR FPEXC, r1               @ restore FPEXC last
         sub     r2, r2, #4
         str     r2, [sp, #S_PC]         @ retry the instruction
+#ifdef CONFIG_PREEMPT
+        get_thread_info r10
+        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
+        sub     r11, r4, #1             @ decrement it
+        str     r11, [r10, #TI_PREEMPT]
+#endif
         mov     pc, r9                  @ we think we have handled things
 
 
@@ -155,6 +161,12 @@ look_for_VFP_exceptions:
         @ not recognised by VFP
 
         DBGSTR  "not VFP"
+#ifdef CONFIG_PREEMPT
+        get_thread_info r10
+        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
+        sub     r11, r4, #1             @ decrement it
+        str     r11, [r10, #TI_PREEMPT]
+#endif
         mov     pc, lr
 
 process_exception:
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 75457b30d813..01599c4ef726 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -266,7 +266,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
                  * on VFP subarch 1.
                  */
                  vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs);
-                 return;
+                goto exit;
         }
 
         /*
@@ -297,7 +297,7 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
          * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1.
          */
         if (fpexc ^ (FPEXC_EX | FPEXC_FP2V))
-                return;
+                goto exit;
 
         /*
          * The barrier() here prevents fpinst2 being read
@@ -310,6 +310,8 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
         exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs);
         if (exceptions)
                 vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
+ exit:
+        preempt_enable();
 }
 
 static void vfp_enable(void *unused)