ENGR00293505 ARM: dtsi: imx6qdl-sabresd: Change disp id for mipi dsi

Currently, by default, we assign ipu display ports for the following
5 types of display devices on the imx6q sabresd platform in this way:
 ----------------------------------------
|                 | ipu             | di |
|----------------------------------------|
| ldb channel0    | 1(0 for imx6dl) | 0  |
|----------------------------------------|
| ldb channel1    | 1(0 for imx6dl) | 1  |
|----------------------------------------|
| hdmi            | 0               | 0  |
|----------------------------------------|
| mipi dsi        | 0               | 0  |
|----------------------------------------|
| parallel output | 0               | 0  |
 ----------------------------------------

So, the ipu0 di1 display port is not used by any display device.
This patch assigns this unused display port to mipi dsi by default.

Acked-by: Robby Cai <R63905@freescale.com>
Cc: Oliver Brown <oliver.brown@freescale.com>
Cc: Sandor Yu <R01008@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index e68818e1a297..fc12b67d66f5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -612,7 +612,7 @@
 
 &mipi_dsi {
         dev_id = <0>;
-        disp_id = <0>;
+        disp_id = <1>;
         lcd_panel = "TRULY-WVGA";
         disp-power-on-supply = <&reg_mipi_dsi_pwr_on>;
         resets = <&mipi_dsi_reset>;