ARM: kirkwood: Basic support for DNS-320 and DNS-325

Add support for the DNS-320 and DNS-325. Describe as much as currently possible
in the devicetree files, create a board-dnskw.c for everything else.

Changes since last submission (V3) [Addressing comments by]:-

* One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper]
* Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely]
* Don't add NAND support then throw it away immediately after [Grant Likely]
* Describe purpose of MPP 41, 42 & 49

Changes since last submission (V2):-

* Use IEEE-compliant "okay", rather than "ok" [Scott Wood]

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 29 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
new file mode 100644
index 000000000000..78c834f6c57f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -0,0 +1,29 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+        model = "D-Link DNS-320 NAS (Rev A1)";
+        compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x8000000>;
+        };
+
+        chosen {
+                bootargs = "console=ttyS0,115200n8 earlyprintk";
+        };
+
+        ocp@f1000000 {
+                serial@12000 {
+                        clock-frequency = <166666667>;
+                        status = "okay";
+                };
+
+                serial@12100 {
+                        clock-frequency = <166666667>;
+                        status = "okay";
+                };
+        };
+};