ARM: dts: imx23-olinuxino: Use pinctrl for gpio-led

Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver
has pinctrl support, so setup the gpio led pin via pinctrl and avoid the
following warning:

leds-gpio leds.5: pins are not configured from the driver

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 11 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 35489a1db77f..8bd56fc7e194 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -40,6 +40,15 @@
                                         reg = <0>;
                                         fsl,pinmux-ids = <
                                                 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+                                        >;
+                                        fsl,drive-strength = <0>;
+                                        fsl,voltage = <1>;
+                                        fsl,pull-up = <0>;
+                                };
+
+                                led_pin_gpio0_17: led_gpio0_17@0 {
+                                        reg = <0>;
+                                        fsl,pinmux-ids = <
                                                 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
                                         >;
                                         fsl,drive-strength = <0>;
@@ -91,6 +100,8 @@
 
         leds {
                 compatible = "gpio-leds";
+                pinctrl-names = "default";
+                pinctrl-0 = <&led_pin_gpio0_17>;
 
                 user {
                         label = "green";