aboutsummaryrefslogtreecommitdiffstats
path: root/net/ipv6/ip6_tunnel.c
Commit message (Collapse)AuthorAge
* ipv6: check skb->protocol before lookup for nexthopWANG Cong2017-05-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 199ab00f3cdb6f154ea93fa76fd80192861a821d ] Andrey reported a out-of-bound access in ip6_tnl_xmit(), this is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4 neigh key as an IPv6 address: neigh = dst_neigh_lookup(skb_dst(skb), &ipv6_hdr(skb)->daddr); if (!neigh) goto tx_err_link_failure; addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE addr_type = ipv6_addr_type(addr6); if (addr_type == IPV6_ADDR_ANY) addr6 = &ipv6_hdr(skb)->daddr; memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr)); Also the network header of the skb at this point should be still IPv4 for 4in6 tunnels, we shold not just use it as IPv6 header. This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it is, we are safe to do the nexthop lookup using skb_dst() and ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which dest address we can pick here, we have to rely on callers to fill it from tunnel config, so just fall to ip6_route_output() to make the decision. Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()Dan Carpenter2017-02-18
| | | | | | | | | | | | | [ Upstream commit 63117f09c768be05a0bf465911297dc76394f686 ] Casting is a high precedence operation but "off" and "i" are in terms of bytes so we need to have some parenthesis here. Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ipv6: fix ip6_tnl_parse_tlv_enc_lim()Eric Dumazet2017-02-18
| | | | | | | | | | | | | | | | | | | | | [ Upstream commit fbfa743a9d2a0ffa24251764f10afc13eb21e739 ] This function suffers from multiple issues. First one is that pskb_may_pull() may reallocate skb->head, so the 'raw' pointer needs either to be reloaded or not used at all. Second issue is that NEXTHDR_DEST handling does not validate that the options are present in skb->data, so we might read garbage or access non existent memory. With help from Willem de Bruijn. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ip6_tunnel: Account for tunnel header in tunnel MTUJakub Sitnicki2017-02-04
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 02ca0423fd65a0a9c4d70da0dbb8f4b8503f08c7 ] With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"Eli Cooper2016-12-02
| | | | | | | | | | | | This reverts commit ae148b085876fa771d9ef2c05f85d4b4bf09ce0d ("ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"). skb->protocol is now set in __ip_local_out() and __ip6_local_out() before dst_output() is called. It is no longer necessary to do it for each tunnel. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: disable caching when the traffic class is inheritedPaolo Abeni2016-11-17
| | | | | | | | | | | | | | If an ip6 tunnel is configured to inherit the traffic class from the inner header, the dst_cache must be disabled or it will foul the policy routing. The issue is apprently there since at leat Linux-2.6.12-rc2. Reported-by: Liam McBirnie <liam.mcbirnie@boeing.com> Cc: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()Eli Cooper2016-10-29
| | | | | | | | | | | | | | This patch updates skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit() when an IPv6 header is installed to a socket buffer. This is not a cosmetic change. Without updating this value, GSO packets transmitted through an ipip6 tunnel have the protocol of ETH_P_IP and skb_mac_gso_segment() will attempt to call gso_segment() for IPv4, which results in the packets being dropped. Fixes: b8921ca83eed ("ip4ip6: Support for GSO/GRO") Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: fix ip6_tnl_lookupVadim Fedorenko2016-10-14
| | | | | | | | | | | | | | | | | The commit ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") introduces support for wildcards in tunnels endpoints, but in some rare circumstances ip6_tnl_lookup selects wrong tunnel interface relying only on source or destination address of the packet and not checking presence of wildcard in tunnels endpoints. Later in ip6_tnl_rcv this packets can be dicarded because of difference in ipproto even if fallback device have proper ipproto configuration. This patch adds checks of wildcard endpoint in tunnel avoiding such behavior Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Signed-off-by: Vadim Fedorenko <junk@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: add collect_md mode to IPv6 tunnelsAlexei Starovoitov2016-09-17
| | | | | | | | | | | | | Similar to gre, vxlan, geneve tunnels allow IPIP6 and IP6IP6 tunnels to operate in 'collect metadata' mode. Unlike ipv4 code here it's possible to reuse ip6_tnl_xmit() function for both collect_md and traditional tunnels. bpf_skb_[gs]et_tunnel_key() helpers and ovs (in the future) are the users. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-09-12
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/qlogic/qed/qed_dcbx.c drivers/net/phy/Kconfig All conflicts were cases of overlapping commits. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ipv6: Don't unset flowi6_proto in ipxip6_tnl_xmit()Eli Cooper2016-09-02
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8eb30be0352d0916 ("ipv6: Create ip6_tnl_xmit") unsets flowi6_proto in ip4ip6_tnl_xmit() and ip6ip6_tnl_xmit(). Since xfrm_selector_match() relies on this info, IPv6 packets sent by an ip6tunnel cannot be properly selected by their protocols after removing it. This patch puts flowi6_proto back. Cc: stable@vger.kernel.org Fixes: 8eb30be0352d ("ipv6: Create ip6_tnl_xmit") Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: resolve symbol conflicts with generic hashtable.hJiri Kosina2016-08-10
|/ | | | | | | | | | | This is a preparatory patch for converting qdisc linked list into a hashtable. As we'll need to include hashtable.h in netdevice.h, we first have to make sure that this will not introduce symbol conflicts for any of the netdevice.h users. Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Don't reset inner headers in ip6_tnl_xmitTom Herbert2016-05-20
| | | | | | | | | Since iptunnel_handle_offloads() is called in all paths we can probably drop the block in ip6_tnl_xmit that was checking for skb->encapsulation and resetting the inner headers. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip4ip6: Support for GSO/GROTom Herbert2016-05-20
| | | | | Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6ip6: Support for GSO/GROTom Herbert2016-05-20
| | | | | Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Set features for IPv6 tunnelsTom Herbert2016-05-20
| | | | | | | Need to set dev features, use same values that are used in GREv6. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: Add support for fou/gue encapsulationTom Herbert2016-05-20
| | | | | | | Add netlink and setup for encapsulation Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tun: Add infrastructure for doing encapsulationTom Herbert2016-05-20
| | | | | | | | | Add encap_hlen and ip_tunnel_encap structure to ip6_tnl. Add functions for getting encap hlen, setting up encap on a tunnel, performing encapsulation operation. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: fix 4in6 tunnel receive pathNicolas Dichtel2016-05-11
| | | | | | | | | | Protocol for 4in6 tunnel is IPPROTO_IPIP. This was wrongly changed by the last cleanup. CC: Tom Herbert <tom@herbertland.com> Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6: Don't set transport header in IPv6 tunnelingTom Herbert2016-05-10
| | | | | | | We only need to reset network header here. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Generic tunnel cleanupTom Herbert2016-05-02
| | | | | | | | | A few generic changes to generalize tunnels in IPv6: - Export ip6_tnl_change_mtu so that it can be called by ip6_gre - Add tun_hlen to ip6_tnl structure. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Create ip6_tnl_xmitTom Herbert2016-05-02
| | | | | | | | | | This patch renames ip6_tnl_xmit2 to ip6_tnl_xmit and exports it. Other users like GRE will be able to call this. The original ip6_tnl_xmit function is renamed to ip6_tnl_start_xmit (this is an ndo_start_xmit function). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Cleanup IPv6 tunnel receive pathTom Herbert2016-05-02
| | | | | | | | | | | | Some basic changes to make IPv6 tunnel receive path look more like IPv4 path: - Make ip6_tnl_rcv non-static so that GREv6 and others can call it - Make ip6_tnl_rcv look like ip_tunnel_rcv - Switch to gro_cells_receive - Make ip6_tnl_rcv non-static and export it Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: set rtnl_link_ops before calling register_netdeviceThadeu Lima de Souza Cascardo2016-04-05
| | | | | | | | | | | | | When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set before ip6_tnl_create2 is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Fixes: 0b112457229d ("ip6tnl: add support of link creation via rtnl") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-03-08
|\ | | | | | | | | | | | | | | Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * tunnel: Clear IPCB(skb)->opt before dst_link_failure calledBernie Harris2016-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPCB may contain data from previous layers (in the observed case the qdisc layer). In the observed scenario, the data was misinterpreted as ip header options, which later caused the ihl to be set to an invalid value (<5). This resulted in an infinite loop in the mips implementation of ip_fast_csum. This patch clears IPCB(skb)->opt before dst_link_failure can be called for various types of tunnels. This change only applies to encapsulated ipv4 packets. The code introduced in 11c21a30 which clears all of IPCB has been removed to be consistent with these changes, and instead the opt field is cleared unconditionally in ip_tunnel_xmit. The change in ip_tunnel_xmit applies to SIT, GRE, and IPIP tunnels. The relevant vti, l2tp, and pptp functions already contain similar code for clearing the IPCB. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: replace dst_cache ip6_tunnel implementation with the generic onePaolo Abeni2016-02-16
|/ | | | | | | | | | | | | | | | | | | | | | | | This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/ip6_tunnel: fix dst leakPaolo Abeni2015-11-18
| | | | | | | | | | | | | | | the commit cdf3464e6c6b ("ipv6: Fix dst_entry refcnt bugs in ip6_tunnel") introduced percpu storage for ip6_tunnel dst cache, but while clearing such cache it used raw_cpu_ptr to walk the per cpu entries, so cached dst on non current cpu are not actually reset. This patch replaces raw_cpu_ptr with per_cpu_ptr, properly cleaning such storage. Fixes: cdf3464e6c6b ("ipv6: Fix dst_entry refcnt bugs in ip6_tunnel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: Reduce log level in ip6_tnl_err() to debugMatt Bennett2015-09-24
| | | | | | | | | | | | | | | Currently error log messages in ip6_tnl_err are printed at 'warn' level. This is different to other tunnel types which don't print any messages. These log messages don't provide any information that couldn't be deduced with networking tools. Also it can be annoying to have one end of the tunnel go down and have the logs fill with pointless messages such as "Path to destination invalid or inactive!". This patch reduces the log level of these messages to 'dbg' level to bring the visible behaviour into line with other tunnel types. Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Replace spinlock with seqlock and rcu in ip6_tunnelMartin KaFai Lau2015-09-15
| | | | | | | | | This patch uses a seqlock to ensure consistency between idst->dst and idst->cookie. It also makes dst freeing from fib tree to undergo a rcu grace period. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Fix dst_entry refcnt bugs in ip6_tunnelMartin KaFai Lau2015-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | Problems in the current dst_entry cache in the ip6_tunnel: 1. ip6_tnl_dst_set is racy. There is no lock to protect it: - One major problem is that the dst refcnt gets messed up. F.e. the same dst_cache can be released multiple times and then triggering the infamous dst refcnt < 0 warning message. - Another issue is the inconsistency between dst_cache and dst_cookie. It can be reproduced by adding and removing the ip6gre tunnel while running a super_netperf TCP_CRR test. 2. ip6_tnl_dst_get does not take the dst refcnt before returning the dst. This patch: 1. Create a percpu dst_entry cache in ip6_tnl 2. Use a spinlock to protect the dst_cache operations 3. ip6_tnl_dst_get always takes the dst refcnt before returning Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Rename the dst_cache helper functions in ip6_tunnelMartin KaFai Lau2015-09-15
| | | | | | | | | | | | | | It is a prep work to fix the dst_entry refcnt bugs in ip6_tunnel. This patch rename: 1. ip6_tnl_dst_check() to ip6_tnl_dst_get() to better reflect that it will take a dst refcnt in the next patch. 2. ip6_tnl_dst_store() to ip6_tnl_dst_set() to have a more conventional name matching with ip6_tnl_dst_get(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Implement different admin modes for automatic flow labelsTom Herbert2015-07-31
| | | | | | | | | | | | | | | Change the meaning of net.ipv6.auto_flowlabels to provide a mode for automatic flow labels generation. There are four modes: 0: flow labels are disabled 1: flow labels are enabled, sockets can opt-out 2: flow labels are allowed, sockets can opt-in 3: flow labels are enabled and enforced, no opt-out for sockets np->autoflowlabel is initialized according to the sysctl value. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabelTom Herbert2015-07-31
| | | | | | | | We can't call skb_get_hash here since the packet is not complete to do flow_dissector. Create hash based on flowi6 instead. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Add rt6_get_cookie() functionMartin KaFai Lau2015-05-25
| | | | | | | | | | | | | Instead of doing the rt6->rt6i_node check whenever we need to get the route's cookie. Refactor it into rt6_get_cookie(). It is a prep work to handle FLOWI_FLAG_KNOWN_NH and also percpu rt6_info later. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
* udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().David Miller2015-04-07
| | | | | | | | | | | That was we can make sure the output path of ipv4/ipv6 operate on the UDP socket rather than whatever random thing happens to be in skb->sk. Based upon a patch by Jiri Pirko. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
* ip6tnl,gre6,vti6: implement ndo_get_iflinkNicolas Dichtel2015-04-02
| | | | | | | | Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc2015-03-31
| | | | | | | Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc2015-03-31
| | | | | | | | | | | | IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: coding style: comparison for inequality with NULLIan Morris2015-03-31
| | | | | | | | | | | | The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x != NULL and sometimes as x. x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: coding style: comparison for equality with NULLIan Morris2015-03-31
| | | | | | | | | | | | The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
| * ip6_tunnel: fix error code when tunnel existsNicolas Dichtel2015-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 2b0bb01b6edb, the kernel returns -ENOBUFS when user tries to add an existing tunnel with ioctl API: $ ip -6 tunnel add ip6tnl1 mode ip6ip6 dev eth1 add tunnel "ip6tnl0" failed: No buffer space available It's confusing, the right error is EEXIST. This patch also change a bit the code returned: - ENOBUFS -> ENOMEM - ENOENT -> ENODEV Fixes: 2b0bb01b6edb ("ip6_tunnel: Return an error when adding an existing tunnel.") CC: Steffen Klassert <steffen.klassert@secunet.com> Reported-by: Pierre Cheynier <me@pierre-cheynier.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: remove dead debug code from ip6_tunnel.cIan Morris2015-02-24
|/ | | | | | | The IP6_TNL_TRACE macro is no longer used anywhere in the code so remove definition. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* tunnels: advertise link netns via netlinkNicolas Dichtel2015-01-19
| | | | | | | | Implement rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: coding style improvements (remove assignment in if statements)Ian Morris2014-11-23
| | | | | | | | | | | | This change has no functional impact and simply addresses some coding style issues detected by checkpatch. Specifically this change adjusts "if" statements which also include the assignment of a variable. No changes to the resultant object files result as determined by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-11-06
|\
| * ip6_tunnel: Use ip6_tnl_dev_init as the ndo_init function.Steffen Klassert2014-11-03
| | | | | | | | | | | | | | | | | | | | | | | | ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ip6_tunnel: Add support for wildcard tunnel endpoints.Steffen Klassert2014-11-06
| | | | | | | | | | | | | | | | | | | | This patch adds support for tunnels with local or remote wildcard endpoints. With this we get a NBMA tunnel mode like we have it for ipv4 and sit tunnels. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ipv6: Allow sending packets through tunnels with wildcard endpointsSteffen Klassert2014-11-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we need the IP6_TNL_F_CAP_XMIT capabiltiy to transmit packets through an ipv6 tunnel. This capability is set when the tunnel gets configured, based on the tunnel endpoint addresses. On tunnels with wildcard tunnel endpoints, we need to do the capabiltiy checking on a per packet basis like it is done in the receive path. This patch extends ip6_tnl_xmit_ctl() to take local and remote addresses as parameters to allow for per packet capabiltiy checking. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-15 14:48:06 -0400