aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/qed
Commit message (Collapse)AuthorAge
* qed*: Reduce the memory footprint for Rx pathSudarsana Reddy Kalluru2016-10-22
| | | | | | | | | | | | | With the current default values for Rx path i.e., 8 queues of 8Kb entries each with 4Kb size, interface will consume 256Mb for Rx. The default values causing the driver probe to fail when the system memory is low. Based on the perforamnce results, rx-ring count value of 1Kb gives the comparable performance with Rx coalesce timeout of 12 seconds. Updating the default values. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Fix Kconfig dependencies with INFINIBAND_QEDRYuval Mintz2016-10-14
| | | | | | | | | | | | | | | | | | | | | The qedr driver would require a tristate Kconfig option [to allow it to compile as a module], and toward that end we've added the INFINIBAND_QEDR option. But as we've made the compilation of the qed/qede infrastructure required for RoCE dependent on the option we'd be facing linking difficulties in case that QED=y or QEDE=y, and INFINIBAND_QEDR=m. To resolve this, we seperate between the INFINIBAND_QEDR option and the infrastructure support in qed/qede by introducing a new QED_RDMA option which would be selected by INFINIBAND_QEDR but would be a boolean instead of a tristate; Following that, the qed/qede is fixed based on this new option so that all config combinations would be supported. Fixes: cee9fbd8e2e9 ("qede: add qedr framework") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add RoCE ll2 & GSI supportRam Amrani2016-10-03
| | | | | | | | | Add the RoCE-specific LL2 logic [as well as GSI support] over the 'generic' LL2 interface. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add support for memory registeration verbsRam Amrani2016-10-03
| | | | | | | | | Add slowpath configuration support for user, dma and memory regions registration. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add support for QP verbsRam Amrani2016-10-03
| | | | | | | | | Add support for the slowpath configurations of Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: PD,PKEY and CQ verb supportRam Amrani2016-10-03
| | | | | | | | | Add support for the configurations of the protection domain and completion queues. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add support for RoCE hw initRam Amrani2016-10-03
| | | | | | | | | | This adds the backbone required for the various HW initalizations which are necessary for the qedr driver - FW notification, resource initializations, etc. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qede: Add qedr frameworkRam Amrani2016-10-03
| | | | | | | | | | | Adds a skeletal implementation of the qede RoCE driver - The qedr has some dependencies of the state of the underlying base interface. This adds some logic required with mutual registrations and the ability to pass updates on 'intresting' events. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add Light L2 supportYuval Mintz2016-10-03
| | | | | | | | | | Other protocols beside the networking driver need the ability of passing some L2 traffic, usually [although not limited] for the purpose of some management traffic. Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Add support for the ethtool get_regs operationTomer Tayar2016-09-07
| | | | | | Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add support for debug data collectionTomer Tayar2016-09-07
| | | | | | | | This patch adds the support for dumping and formatting the HW/FW debug data. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Fix address macrosYuval Mintz2016-08-23
| | | | | | | | | | | | Last FW submission reverted various macros into an older form, where they generate compilation warnings on some architectures. Bring back the newer macros instead. Fixes: 05fafbfb3d77 ("qed: utilize FW 8.10.10.0") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Add support for VFs over legacy PFsYuval Mintz2016-08-22
| | | | | | | | | | | | | | | | Modern VFs can't run on old non-compatible as the fastpath HSI is slightly changed - but as the HSI is actually very close [basically, a single bit whose meaning flipped] this can be supported with small modifications. The major differences would be in: - Recognizing that VF is running on top of a legacy PF. - Returning some slowpath configurations that are no longer needed on top of modern PFs, but would be required when working over the legacy ones. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: utilize FW 8.10.10.0Yuval Mintz2016-08-19
| | | | | | | | | | | | | | | | | | | | | This new firmware for the qed* adpaters fixes several issues: - Better blocking of malicious VFs. - After FLR, Tx-switching [internal routing] of packets might be incorrect. - Deletion of unicast MAC filters would sometime have side-effect of corrupting the MAC filters configred for a device. It also contains fixes for future qed* drivers that *hopefully* would be sent for review in the near future. In addition, it would allow driver some new functionality, including: - Allowing PF/VF driver compaitibility with old drivers [running pre-8.10.5.0 firmware]. - Better debug facilities. This would also bump the qed* driver versions to 8.10.9.20. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Fix pause settingYuval Mintz2016-08-19
| | | | | | | | | | | When moving into using ethtool's link_ksetting, qed started supplying its own bitmask of speed/capabilities, but qede is still checking for the SUPPORTED value to determine whether it supports pause. Fixes: 054c67d1c82a ("qed*: Add support for ethtool link_ksettings callbacks") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-08-18
|\ | | | | | | | | | | | | | | | | Minor overlapping changes for both merge conflicts. Resolution work done by Stephen Rothwell was used as a reference. Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed: Add dcbx app support for IEEE Selection Field.Sudarsana Reddy Kalluru2016-08-09
| | | | | | | | | | | | | | | | | | MFW now supports the Selection field for IEEE mode. Add driver changes to use the newer MFW masks to read/write the port-id value. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed*: Add support for ethtool link_ksettings callbacks.Sudarsana Reddy Kalluru2016-08-10
|/ | | | | | | | | | | | | This patch adds the driver implementation for ethtool link_ksettings callbacks. qed driver now defines/uses the qed specific masks for representing link capability values. qede driver maps these values to to new link modes defined by the kernel implementation of link_ksettings. Please consider applying this to 'net-next' branch. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-06-30
|\ | | | | | | | | | | | | | | Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed*: Don't reset statistics on inner reloadYuval Mintz2016-06-19
| | | | | | | | | | | | | | | | | | | | Several user APIs can cause driver to perform an inner-reload. Currently, doing this would cause the HW/FW statistics of the adapter to reset, which isn't the expected behavior [statistics should only reset on explicit unloads]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Add support for coalescing config read/update.Sudarsana Reddy Kalluru2016-06-23
| | | | | | | | | | | | | | | | | | | | This patch adds support for configuring the device tx/rx coalescing timeout values in the order of micro seconds. It also adds APIs for upper layer drivers for reading/updating the coalescing values. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Add dcbnl support.Sudarsana Reddy Kalluru2016-06-08
| | | | | | | | | | | | | | | | | | This patch adds the implementation for both cee/ieee dcbnl callbacks by using the qed query/config APIs. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Add support for query/config dcbx.Sudarsana Reddy Kalluru2016-06-08
| | | | | | | | | | | | | | | | | | | | Query API reads the dcbx data from the device shared memory and return it to the caller. The config API configures the user provided dcbx values on the device, and initiates the dcbx negotiation with the peer. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Fix next-ptr chains for BE / 32-bitYuval Mintz2016-06-04
| | | | | | | | | | | | | | | | | | | | | | | | Commit a91eb52abb50 ("qed: Revisit chain implementation") contains an incorrect implementation for BE platforms, as device's regpairs containing addresses are LE and they're not converted correctly when read back. In addition, it raises a compilation warning for 32-bit platforms where dma_addr_t is a 32-bit variable. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Add iscsi/rdma personalitiesYuval Mintz2016-06-03
| | | | | | | | | | | | | | | | This patch adds in the ecore 2 new personalities in addition to QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Add common HSI for new protocolsYuval Mintz2016-06-03
| | | | | | | | | | | | | | | | | | This adds the qed portion of the RoCE & iSCSI firmware HSI, as well as adding several new common HSI files which would be required by both qed and qed* protocols. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Revisit chain implementationYuval Mintz2016-06-03
| | | | | | | | | | | | | | | | | | | | | | RoCE driver is going to need a 32-bit chain [current chain implementation for qed* currently supports only 16-bit producer/consumer chains]. This patch adds said support, as well as doing other slight tweaks and modifications to qed's chain API. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Utilize FW 8.10.3.0Yuval Mintz2016-06-03
|/ | | | | | | | | | | | | | | The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: add support for dcbx.Sudarsana Reddy Kalluru2016-05-17
| | | | | | | | | | | | | This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communicating the DCBX and driving the negotiation, but the driver has responsibility of receiving async notification and configuring the results in hw/fw. This patch also adds the dcbx support for future protocols (e.g., FCoE) as preparation to their imminent submission. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Tx-switching configurationYuval Mintz2016-05-12
| | | | | | | | | Device should be configured by default to VEB once VFs are active. This changes the configuration of both PFs' and VFs' vports into enabling tx-switching once sriov is enabled. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: support ndo_get_vf_configYuval Mintz2016-05-12
| | | | | | | | Allows the user to view the VF configuration by observing the PF's device. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: IOV support spoof-checkingYuval Mintz2016-05-12
| | | | | | | | Add support in `ndo_set_vf_spoofchk' for allowing PF control over its VF spoof-checking configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: IOV link controlYuval Mintz2016-05-12
| | | | | | | | | This adds support in 2 ndo that allow PF to tweak the VF's view of the link - `ndo_set_vf_link_state' to allow it a view independent of the PF's, and `ndo_set_vf_rate' which would allow the PF to limit the VF speed. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Support forced MACYuval Mintz2016-05-12
| | | | | | | | | | | Allows the PF to enforce the VF's mac. i.e., by using `ip link ... vf <x> mac <value>'. While a MAC is forced, PF would prevent the VF from configuring any other MAC. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Support PVID configurationYuval Mintz2016-05-12
| | | | | | | | | | | | This adds support for PF control over the VF vlan configuration. I.e., `ip link ... vf <x> vlan <vid>' should now be supported. 1. <vid> != 0 => VF receives [unknowingly] only traffic tagged by <vid> and tags all outgoing traffic sent by VF with <vid>. 2. <vid> == 0 ==> Remove the pvid configuration, reverting to previous. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: IOV configure and FLRYuval Mintz2016-05-12
| | | | | | | | | | | | | While previous patches have already added the necessary logic to probe VFs as well as enabling them in the HW, this patch adds the ability to support VF FLR & SRIOV disable. It then wraps both flows together into the first IOV callback to be provided to the protocol driver - `configure'. This would later to be used to enable and disable SRIOV in the adapter. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Introduce VFsYuval Mintz2016-05-12
| | | | | | | | | | | | | | | | | This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add VF->PF channel infrastructureYuval Mintz2016-05-12
| | | | | | | | | | | | | | | | | | | | | Communication between VF and PF is based on a dedicated HW channel; VF will prepare a messge, and by signaling the HW the PF would get a notification of that message existance. The PF would then copy the message, process it and DMA an answer back to the VF as a response. The messages themselves are TLV-based - allowing easier backward/forward compatibility. This patch adds the infrastructure of the channel on the PF side - starting with the arrival of the notification and ending with DMAing the response back to the VF. It also adds a dummy-response as reference, as it only lays the groundwork of the communication; it doesn't really add support of any actual messages. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: add infrastructure for device self tests.Sudarsana Reddy Kalluru2016-05-02
| | | | | | | | | | | This patch adds the functionality and APIs needed for selftests. It adds the ability to configure the link-mode which is required for the implementation of loopback tests. It adds the APIs for clock test, register test, interrupt test and memory test. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Conditions for changing linkYuval Mintz2016-04-25
| | | | | | | | | | | | | | | | | There's some inconsistency in current logic determining whether the link settings of a given interface can be changed; I.e., in all modes other than the so-called `deault' mode the interfaces are forbidden from changing the configuration - but even this rule is not applied to all user APIs that may change the configuration. Instead, let the core-module [qed] decide whether an interface can change the configuration by supporting a new API function. We also revise the current rule, allowing all interfaces to change their configurations while laying the infrastructure for future modes where an interface would be blocked from making such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: Align statistics namesYuval Mintz2016-04-25
| | | | | | | | | | There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Add infrastructure support for tunnelingManish Chopra2016-04-15
| | | | | | | | | | This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: add Rx flow hash/indirection support.Sudarsana Reddy Kalluru2016-04-14
| | | | | | | | Adds the required API for passing RSS-related configuration from qede. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed*: remove version dependencyRahul Verma2016-04-14
| | | | | | | | | Inbox drivers don't need versioning scheme in order to guarantee compatibility, as both qed and qede are compiled from same codebase. Signed-off-by: Rahul Verma <rahul.verma@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed/qede: Add infrastructure support for hardware GROManish Chopra2016-03-07
| | | | | | | | | | This patch adds mainly structures and APIs prototype changes in order to give support for qede slowpath/fastpath support for the same. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Semantic refactoring of interrupt codeYuval Mintz2016-03-01
| | | | | Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Introduce DMA_REGPAIR_LEYuval Mintz2016-02-21
| | | | | | | | | FW hsi contains regpairs, mostly for 64-bit address representations. Since same paradigm is applied each time a regpair is filled, this introduces a new utility macro for setting such regpairs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed: Lay infrastructure for vlan filtering offloadYuval Mintz2016-02-18
| | | | | | | | | | | | | Today, interfaces are working in vlan-promisc mode; But once vlan filtering offloaded would be supported, we'll need a method to control it directly [e.g., when setting device to PROMISC, or when running out of vlan credits]. This adds the necessary API for L2 client to manually choose whether to accept all vlans or only those for which filters were configured. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qed/qede: use 8.7.3.0 FW.Yuval Mintz2016-02-17
| | | | | | | | | | | | | | | | | | This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-12-17
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-14 19:01:13 -0400