1 files changed, 177 insertions, 0 deletions

diff --git a/scripts/faddr2line b/scripts/faddr2line
new file mode 100755
index 000000000000..450b33257339
--- /dev/null
+++ b/scripts/faddr2line
@@ -0,0 +1,177 @@
+#!/bin/bash
+#
+# Translate stack dump function offsets.
+#
+# addr2line doesn't work with KASLR addresses.  This works similarly to
+# addr2line, but instead takes the 'func+0x123' format as input:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568
+#   meminfo_proc_show+0x5/0x568:
+#   meminfo_proc_show at fs/proc/meminfo.c:27
+#
+# If the address is part of an inlined function, the full inline call chain is
+# printed:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27
+#   native_write_msr+0x6/0x27:
+#   arch_static_branch at arch/x86/include/asm/msr.h:121
+#    (inlined by) static_key_false at include/linux/jump_label.h:125
+#    (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125
+#
+# The function size after the '/' in the input is optional, but recommended.
+# It's used to help disambiguate any duplicate symbol names, which can occur
+# rarely.  If the size is omitted for a duplicate symbol then it's possible for
+# multiple code sites to be printed:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5
+#   raw_ioctl+0x5/0x20:
+#   raw_ioctl at drivers/char/raw.c:122
+#
+#   raw_ioctl+0x5/0xb1:
+#   raw_ioctl at net/ipv4/raw.c:876
+#
+# Multiple addresses can be specified on a single command line:
+#
+#   $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90
+#   type_show+0x10/0x2d:
+#   type_show at drivers/video/backlight/backlight.c:213
+#
+#   free_reserved_area+0x90/0x123:
+#   free_reserved_area at mm/page_alloc.c:6429 (discriminator 2)
+
+
+set -o errexit
+set -o nounset
+
+command -v awk >/dev/null 2>&1 || die "awk isn't installed"
+command -v readelf >/dev/null 2>&1 || die "readelf isn't installed"
+command -v addr2line >/dev/null 2>&1 || die "addr2line isn't installed"
+
+usage() {
+        echo "usage: faddr2line <object file> <func+offset> <func+offset>..." >&2
+        exit 1
+}
+
+warn() {
+        echo "$1" >&2
+}
+
+die() {
+        echo "ERROR: $1" >&2
+        exit 1
+}
+
+# Try to figure out the source directory prefix so we can remove it from the
+# addr2line output.  HACK ALERT: This assumes that start_kernel() is in
+# kernel/init.c!  This only works for vmlinux.  Otherwise it falls back to
+# printing the absolute path.
+find_dir_prefix() {
+        local objfile=$1
+
+        local start_kernel_addr=$(readelf -sW $objfile | awk '$8 == "start_kernel" {printf "0x%s", $2}')
+        [[ -z $start_kernel_addr ]] && return
+
+        local file_line=$(addr2line -e $objfile $start_kernel_addr)
+        [[ -z $file_line ]] && return
+
+        local prefix=${file_line%init/main.c:*}
+        if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then
+                return
+        fi
+
+        DIR_PREFIX=$prefix
+        return 0
+}
+
+__faddr2line() {
+        local objfile=$1
+        local func_addr=$2
+        local dir_prefix=$3
+        local print_warnings=$4
+
+        local func=${func_addr%+*}
+        local offset=${func_addr#*+}
+        offset=${offset%/*}
+        local size=
+        [[ $func_addr =~ "/" ]] && size=${func_addr#*/}
+
+        if [[ -z $func ]] || [[ -z $offset ]] || [[ $func = $func_addr ]]; then
+                warn "bad func+offset $func_addr"
+                DONE=1
+                return
+        fi
+
+        # Go through each of the object's symbols which match the func name.
+        # In rare cases there might be duplicates.
+        while read symbol; do
+                local fields=($symbol)
+                local sym_base=0x${fields[1]}
+                local sym_size=${fields[2]}
+                local sym_type=${fields[3]}
+
+                # calculate the address
+                local addr=$(($sym_base + $offset))
+                if [[ -z $addr ]] || [[ $addr = 0 ]]; then
+                        warn "bad address: $sym_base + $offset"
+                        DONE=1
+                        return
+                fi
+                local hexaddr=0x$(printf %x $addr)
+
+                # weed out non-function symbols
+                if [[ $sym_type != "FUNC" ]]; then
+                        [[ $print_warnings = 1 ]] &&
+                                echo "skipping $func address at $hexaddr due to non-function symbol"
+                        continue
+                fi
+
+                # if the user provided a size, make sure it matches the symbol's size
+                if [[ -n $size ]] && [[ $size -ne $sym_size ]]; then
+                        [[ $print_warnings = 1 ]] &&
+                                echo "skipping $func address at $hexaddr due to size mismatch ($size != $sym_size)"
+                        continue;
+                fi
+
+                # make sure the provided offset is within the symbol's range
+                if [[ $offset -gt $sym_size ]]; then
+                        [[ $print_warnings = 1 ]] &&
+                                echo "skipping $func address at $hexaddr due to size mismatch ($offset > $sym_size)"
+                        continue
+                fi
+
+                # separate multiple entries with a blank line
+                [[ $FIRST = 0 ]] && echo
+                FIRST=0
+
+                local hexsize=0x$(printf %x $sym_size)
+                echo "$func+$offset/$hexsize:"
+                addr2line -fpie $objfile $hexaddr | sed "s; $dir_prefix\(\./\)*; ;"
+                DONE=1
+
+        done < <(readelf -sW $objfile | awk -v f=$func '$8 == f {print}')
+}
+
+[[ $# -lt 2 ]] && usage
+
+objfile=$1
+[[ ! -f $objfile ]] && die "can't find objfile $objfile"
+shift
+
+DIR_PREFIX=supercalifragilisticexpialidocious
+find_dir_prefix $objfile
+
+FIRST=1
+while [[ $# -gt 0 ]]; do
+        func_addr=$1
+        shift
+
+        # print any matches found
+        DONE=0
+        __faddr2line $objfile $func_addr $DIR_PREFIX 0
+
+        # if no match was found, print warnings
+        if [[ $DONE = 0 ]]; then
+                __faddr2line $objfile $func_addr $DIR_PREFIX 1
+                warn "no match for $func_addr"
+        fi
+done