1 files changed, 648 insertions, 0 deletions

diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
new file mode 100644
index 000000000000..f13fd8b1dd79
--- /dev/null
+++ b/include/linux/i3c/master.h
@@ -0,0 +1,648 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef I3C_MASTER_H
+#define I3C_MASTER_H
+
+#include <asm/bitsperlong.h>
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/i3c/ccc.h>
+#include <linux/i3c/device.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#define I3C_HOT_JOIN_ADDR               0x2
+#define I3C_BROADCAST_ADDR              0x7e
+#define I3C_MAX_ADDR                    GENMASK(6, 0)
+
+struct i3c_master_controller;
+struct i3c_bus;
+struct i2c_device;
+struct i3c_device;
+
+/**
+ * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor
+ * @node: node element used to insert the slot into the I2C or I3C device
+ *        list
+ * @master: I3C master that instantiated this device. Will be used to do
+ *          I2C/I3C transfers
+ * @master_priv: master private data assigned to the device. Can be used to
+ *               add master specific information
+ *
+ * This structure is describing common I3C/I2C dev information.
+ */
+struct i3c_i2c_dev_desc {
+        struct list_head node;
+        struct i3c_master_controller *master;
+        void *master_priv;
+};
+
+#define I3C_LVR_I2C_INDEX_MASK          GENMASK(7, 5)
+#define I3C_LVR_I2C_INDEX(x)            ((x) << 5)
+#define I3C_LVR_I2C_FM_MODE             BIT(4)
+
+#define I2C_MAX_ADDR                    GENMASK(9, 0)
+
+/**
+ * struct i2c_dev_boardinfo - I2C device board information
+ * @node: used to insert the boardinfo object in the I2C boardinfo list
+ * @base: regular I2C board information
+ * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about
+ *       the I2C device limitations
+ *
+ * This structure is used to attach board-level information to an I2C device.
+ * Each I2C device connected on the I3C bus should have one.
+ */
+struct i2c_dev_boardinfo {
+        struct list_head node;
+        struct i2c_board_info base;
+        u8 lvr;
+};
+
+/**
+ * struct i2c_dev_desc - I2C device descriptor
+ * @common: common part of the I2C device descriptor
+ * @boardinfo: pointer to the boardinfo attached to this I2C device
+ * @dev: I2C device object registered to the I2C framework
+ *
+ * Each I2C device connected on the bus will have an i2c_dev_desc.
+ * This object is created by the core and later attached to the controller
+ * using &struct_i3c_master_controller->ops->attach_i2c_dev().
+ *
+ * &struct_i2c_dev_desc is the internal representation of an I2C device
+ * connected on an I3C bus. This object is also passed to all
+ * &struct_i3c_master_controller_ops hooks.
+ */
+struct i2c_dev_desc {
+        struct i3c_i2c_dev_desc common;
+        const struct i2c_dev_boardinfo *boardinfo;
+        struct i2c_client *dev;
+};
+
+/**
+ * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot
+ * @work: work associated to this slot. The IBI handler will be called from
+ *        there
+ * @dev: the I3C device that has generated this IBI
+ * @len: length of the payload associated to this IBI
+ * @data: payload buffer
+ *
+ * An IBI slot is an object pre-allocated by the controller and used when an
+ * IBI comes in.
+ * Every time an IBI comes in, the I3C master driver should find a free IBI
+ * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using
+ * i3c_master_queue_ibi().
+ *
+ * How IBI slots are allocated is left to the I3C master driver, though, for
+ * simple kmalloc-based allocation, the generic IBI slot pool can be used.
+ */
+struct i3c_ibi_slot {
+        struct work_struct work;
+        struct i3c_dev_desc *dev;
+        unsigned int len;
+        void *data;
+};
+
+/**
+ * struct i3c_device_ibi_info - IBI information attached to a specific device
+ * @all_ibis_handled: used to be informed when no more IBIs are waiting to be
+ *                    processed. Used by i3c_device_disable_ibi() to wait for
+ *                    all IBIs to be dequeued
+ * @pending_ibis: count the number of pending IBIs. Each pending IBI has its
+ *                work element queued to the controller workqueue
+ * @max_payload_len: maximum payload length for an IBI coming from this device.
+ *                   this value is specified when calling
+ *                   i3c_device_request_ibi() and should not change at run
+ *                   time. All messages IBIs exceeding this limit should be
+ *                   rejected by the master
+ * @num_slots: number of IBI slots reserved for this device
+ * @enabled: reflect the IBI status
+ * @handler: IBI handler specified at i3c_device_request_ibi() call time. This
+ *           handler will be called from the controller workqueue, and as such
+ *           is allowed to sleep (though it is recommended to process the IBI
+ *           as fast as possible to not stall processing of other IBIs queued
+ *           on the same workqueue).
+ *           New I3C messages can be sent from the IBI handler
+ *
+ * The &struct_i3c_device_ibi_info object is allocated when
+ * i3c_device_request_ibi() is called and attached to a specific device. This
+ * object is here to manage IBIs coming from a specific I3C device.
+ *
+ * Note that this structure is the generic view of the IBI management
+ * infrastructure. I3C master drivers may have their own internal
+ * representation which they can associate to the device using
+ * controller-private data.
+ */
+struct i3c_device_ibi_info {
+        struct completion all_ibis_handled;
+        atomic_t pending_ibis;
+        unsigned int max_payload_len;
+        unsigned int num_slots;
+        unsigned int enabled;
+        void (*handler)(struct i3c_device *dev,
+                        const struct i3c_ibi_payload *payload);
+};
+
+/**
+ * struct i3c_dev_boardinfo - I3C device board information
+ * @node: used to insert the boardinfo object in the I3C boardinfo list
+ * @init_dyn_addr: initial dynamic address requested by the FW. We provide no
+ *                 guarantee that the device will end up using this address,
+ *                 but try our best to assign this specific address to the
+ *                 device
+ * @static_addr: static address the I3C device listen on before it's been
+ *               assigned a dynamic address by the master. Will be used during
+ *               bus initialization to assign it a specific dynamic address
+ *               before starting DAA (Dynamic Address Assignment)
+ * @pid: I3C Provisional ID exposed by the device. This is a unique identifier
+ *       that may be used to attach boardinfo to i3c_dev_desc when the device
+ *       does not have a static address
+ * @of_node: optional DT node in case the device has been described in the DT
+ *
+ * This structure is used to attach board-level information to an I3C device.
+ * Not all I3C devices connected on the bus will have a boardinfo. It's only
+ * needed if you want to attach extra resources to a device or assign it a
+ * specific dynamic address.
+ */
+struct i3c_dev_boardinfo {
+        struct list_head node;
+        u8 init_dyn_addr;
+        u8 static_addr;
+        u64 pid;
+        struct device_node *of_node;
+};
+
+/**
+ * struct i3c_dev_desc - I3C device descriptor
+ * @common: common part of the I3C device descriptor
+ * @info: I3C device information. Will be automatically filled when you create
+ *        your device with i3c_master_add_i3c_dev_locked()
+ * @ibi_lock: lock used to protect the &struct_i3c_device->ibi
+ * @ibi: IBI info attached to a device. Should be NULL until
+ *       i3c_device_request_ibi() is called
+ * @dev: pointer to the I3C device object exposed to I3C device drivers. This
+ *       should never be accessed from I3C master controller drivers. Only core
+ *       code should manipulate it in when updating the dev <-> desc link or
+ *       when propagating IBI events to the driver
+ * @boardinfo: pointer to the boardinfo attached to this I3C device
+ *
+ * Internal representation of an I3C device. This object is only used by the
+ * core and passed to I3C master controller drivers when they're requested to
+ * do some operations on the device.
+ * The core maintains the link between the internal I3C dev descriptor and the
+ * object exposed to the I3C device drivers (&struct_i3c_device).
+ */
+struct i3c_dev_desc {
+        struct i3c_i2c_dev_desc common;
+        struct i3c_device_info info;
+        struct mutex ibi_lock;
+        struct i3c_device_ibi_info *ibi;
+        struct i3c_device *dev;
+        const struct i3c_dev_boardinfo *boardinfo;
+};
+
+/**
+ * struct i3c_device - I3C device object
+ * @dev: device object to register the I3C dev to the device model
+ * @desc: pointer to an i3c device descriptor object. This link is updated
+ *        every time the I3C device is rediscovered with a different dynamic
+ *        address assigned
+ * @bus: I3C bus this device is attached to
+ *
+ * I3C device object exposed to I3C device drivers. The takes care of linking
+ * this object to the relevant &struct_i3c_dev_desc one.
+ * All I3C devs on the I3C bus are represented, including I3C masters. For each
+ * of them, we have an instance of &struct i3c_device.
+ */
+struct i3c_device {
+        struct device dev;
+        struct i3c_dev_desc *desc;
+        struct i3c_bus *bus;
+};
+
+/*
+ * The I3C specification says the maximum number of devices connected on the
+ * bus is 11, but this number depends on external parameters like trace length,
+ * capacitive load per Device, and the types of Devices present on the Bus.
+ * I3C master can also have limitations, so this number is just here as a
+ * reference and should be adjusted on a per-controller/per-board basis.
+ */
+#define I3C_BUS_MAX_DEVS                11
+
+#define I3C_BUS_MAX_I3C_SCL_RATE        12900000
+#define I3C_BUS_TYP_I3C_SCL_RATE        12500000
+#define I3C_BUS_I2C_FM_PLUS_SCL_RATE    1000000
+#define I3C_BUS_I2C_FM_SCL_RATE         400000
+#define I3C_BUS_TLOW_OD_MIN_NS          200
+
+/**
+ * enum i3c_bus_mode - I3C bus mode
+ * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation
+ *                     expected
+ * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on
+ *                           the bus. The only impact in this mode is that the
+ *                           high SCL pulse has to stay below 50ns to trick I2C
+ *                           devices when transmitting I3C frames
+ * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present
+ *                           on the bus
+ */
+enum i3c_bus_mode {
+        I3C_BUS_MODE_PURE,
+        I3C_BUS_MODE_MIXED_FAST,
+        I3C_BUS_MODE_MIXED_SLOW,
+};
+
+/**
+ * enum i3c_addr_slot_status - I3C address slot status
+ * @I3C_ADDR_SLOT_FREE: address is free
+ * @I3C_ADDR_SLOT_RSVD: address is reserved
+ * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device
+ * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device
+ * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask
+ *
+ * On an I3C bus, addresses are assigned dynamically, and we need to know which
+ * addresses are free to use and which ones are already assigned.
+ *
+ * Addresses marked as reserved are those reserved by the I3C protocol
+ * (broadcast address, ...).
+ */
+enum i3c_addr_slot_status {
+        I3C_ADDR_SLOT_FREE,
+        I3C_ADDR_SLOT_RSVD,
+        I3C_ADDR_SLOT_I2C_DEV,
+        I3C_ADDR_SLOT_I3C_DEV,
+        I3C_ADDR_SLOT_STATUS_MASK = 3,
+};
+
+/**
+ * struct i3c_bus - I3C bus object
+ * @cur_master: I3C master currently driving the bus. Since I3C is multi-master
+ *              this can change over the time. Will be used to let a master
+ *              know whether it needs to request bus ownership before sending
+ *              a frame or not
+ * @id: bus ID. Assigned by the framework when register the bus
+ * @addrslots: a bitmap with 2-bits per-slot to encode the address status and
+ *             ease the DAA (Dynamic Address Assignment) procedure (see
+ *             &enum i3c_addr_slot_status)
+ * @mode: bus mode (see &enum i3c_bus_mode)
+ * @scl_rate.i3c: maximum rate for the clock signal when doing I3C SDR/priv
+ *                transfers
+ * @scl_rate.i2c: maximum rate for the clock signal when doing I2C transfers
+ * @scl_rate: SCL signal rate for I3C and I2C mode
+ * @devs.i3c: contains a list of I3C device descriptors representing I3C
+ *            devices connected on the bus and successfully attached to the
+ *            I3C master
+ * @devs.i2c: contains a list of I2C device descriptors representing I2C
+ *            devices connected on the bus and successfully attached to the
+ *            I3C master
+ * @devs: 2 lists containing all I3C/I2C devices connected to the bus
+ * @lock: read/write lock on the bus. This is needed to protect against
+ *        operations that have an impact on the whole bus and the devices
+ *        connected to it. For example, when asking slaves to drop their
+ *        dynamic address (RSTDAA CCC), we need to make sure no one is trying
+ *        to send I3C frames to these devices.
+ *        Note that this lock does not protect against concurrency between
+ *        devices: several drivers can send different I3C/I2C frames through
+ *        the same master in parallel. This is the responsibility of the
+ *        master to guarantee that frames are actually sent sequentially and
+ *        not interlaced
+ *
+ * The I3C bus is represented with its own object and not implicitly described
+ * by the I3C master to cope with the multi-master functionality, where one bus
+ * can be shared amongst several masters, each of them requesting bus ownership
+ * when they need to.
+ */
+struct i3c_bus {
+        struct i3c_dev_desc *cur_master;
+        int id;
+        unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG];
+        enum i3c_bus_mode mode;
+        struct {
+                unsigned long i3c;
+                unsigned long i2c;
+        } scl_rate;
+        struct {
+                struct list_head i3c;
+                struct list_head i2c;
+        } devs;
+        struct rw_semaphore lock;
+};
+
+/**
+ * struct i3c_master_controller_ops - I3C master methods
+ * @bus_init: hook responsible for the I3C bus initialization. You should at
+ *            least call master_set_info() from there and set the bus mode.
+ *            You can also put controller specific initialization in there.
+ *            This method is mandatory.
+ * @bus_cleanup: cleanup everything done in
+ *               &i3c_master_controller_ops->bus_init().
+ *               This method is optional.
+ * @attach_i3c_dev: called every time an I3C device is attached to the bus. It
+ *                  can be after a DAA or when a device is statically declared
+ *                  by the FW, in which case it will only have a static address
+ *                  and the dynamic address will be 0.
+ *                  When this function is called, device information have not
+ *                  been retrieved yet.
+ *                  This is a good place to attach master controller specific
+ *                  data to I3C devices.
+ *                  This method is optional.
+ * @reattach_i3c_dev: called every time an I3C device has its addressed
+ *                    changed. It can be because the device has been powered
+ *                    down and has lost its address, or it can happen when a
+ *                    device had a static address and has been assigned a
+ *                    dynamic address with SETDASA.
+ *                    This method is optional.
+ * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually
+ *                  happens when the master device is unregistered.
+ *                  This method is optional.
+ * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure
+ *          should send an ENTDAA CCC command and then add all devices
+ *          discovered sure the DAA using i3c_master_add_i3c_dev_locked().
+ *          Add devices added with i3c_master_add_i3c_dev_locked() will then be
+ *          attached or re-attached to the controller.
+ *          This method is mandatory.
+ * @supports_ccc_cmd: should return true if the CCC command is supported, false
+ *                    otherwise.
+ *                    This method is optional, if not provided the core assumes
+ *                    all CCC commands are supported.
+ * @send_ccc_cmd: send a CCC command
+ *                This method is mandatory.
+ * @priv_xfers: do one or several private I3C SDR transfers
+ *              This method is mandatory.
+ * @attach_i2c_dev: called every time an I2C device is attached to the bus.
+ *                  This is a good place to attach master controller specific
+ *                  data to I2C devices.
+ *                  This method is optional.
+ * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually
+ *                  happens when the master device is unregistered.
+ *                  This method is optional.
+ * @i2c_xfers: do one or several I2C transfers. Note that, unlike i3c
+ *             transfers, the core does not guarantee that buffers attached to
+ *             the transfers are DMA-safe. If drivers want to have DMA-safe
+ *             buffers, they should use the i2c_get_dma_safe_msg_buf()
+ *             and i2c_put_dma_safe_msg_buf() helpers provided by the I2C
+ *             framework.
+ *             This method is mandatory.
+ * @i2c_funcs: expose the supported I2C functionalities.
+ *             This method is mandatory.
+ * @request_ibi: attach an IBI handler to an I3C device. This implies defining
+ *               an IBI handler and the constraints of the IBI (maximum payload
+ *               length and number of pre-allocated slots).
+ *               Some controllers support less IBI-capable devices than regular
+ *               devices, so this method might return -%EBUSY if there's no
+ *               more space for an extra IBI registration
+ *               This method is optional.
+ * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI
+ *            should have been disabled with ->disable_irq() prior to that
+ *            This method is mandatory only if ->request_ibi is not NULL.
+ * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called
+ *              prior to ->enable_ibi(). The controller should first enable
+ *              the IBI on the controller end (for example, unmask the hardware
+ *              IRQ) and then send the ENEC CCC command (with the IBI flag set)
+ *              to the I3C device.
+ *              This method is mandatory only if ->request_ibi is not NULL.
+ * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI
+ *               flag set and then deactivate the hardware IRQ on the
+ *               controller end.
+ *               This method is mandatory only if ->request_ibi is not NULL.
+ * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been
+ *                    processed by its handler. The IBI slot should be put back
+ *                    in the IBI slot pool so that the controller can re-use it
+ *                    for a future IBI
+ *                    This method is mandatory only if ->request_ibi is not
+ *                    NULL.
+ */
+struct i3c_master_controller_ops {
+        int (*bus_init)(struct i3c_master_controller *master);
+        void (*bus_cleanup)(struct i3c_master_controller *master);
+        int (*attach_i3c_dev)(struct i3c_dev_desc *dev);
+        int (*reattach_i3c_dev)(struct i3c_dev_desc *dev, u8 old_dyn_addr);
+        void (*detach_i3c_dev)(struct i3c_dev_desc *dev);
+        int (*do_daa)(struct i3c_master_controller *master);
+        bool (*supports_ccc_cmd)(struct i3c_master_controller *master,
+                                 const struct i3c_ccc_cmd *cmd);
+        int (*send_ccc_cmd)(struct i3c_master_controller *master,
+                            struct i3c_ccc_cmd *cmd);
+        int (*priv_xfers)(struct i3c_dev_desc *dev,
+                          struct i3c_priv_xfer *xfers,
+                          int nxfers);
+        int (*attach_i2c_dev)(struct i2c_dev_desc *dev);
+        void (*detach_i2c_dev)(struct i2c_dev_desc *dev);
+        int (*i2c_xfers)(struct i2c_dev_desc *dev,
+                         const struct i2c_msg *xfers, int nxfers);
+        u32 (*i2c_funcs)(struct i3c_master_controller *master);
+        int (*request_ibi)(struct i3c_dev_desc *dev,
+                           const struct i3c_ibi_setup *req);
+        void (*free_ibi)(struct i3c_dev_desc *dev);
+        int (*enable_ibi)(struct i3c_dev_desc *dev);
+        int (*disable_ibi)(struct i3c_dev_desc *dev);
+        void (*recycle_ibi_slot)(struct i3c_dev_desc *dev,
+                                 struct i3c_ibi_slot *slot);
+};
+
+/**
+ * struct i3c_master_controller - I3C master controller object
+ * @dev: device to be registered to the device-model
+ * @this: an I3C device object representing this master. This device will be
+ *        added to the list of I3C devs available on the bus
+ * @i2c: I2C adapter used for backward compatibility. This adapter is
+ *       registered to the I2C subsystem to be as transparent as possible to
+ *       existing I2C drivers
+ * @ops: master operations. See &struct i3c_master_controller_ops
+ * @secondary: true if the master is a secondary master
+ * @init_done: true when the bus initialization is done
+ * @boardinfo.i3c: list of I3C  boardinfo objects
+ * @boardinfo.i2c: list of I2C boardinfo objects
+ * @boardinfo: board-level information attached to devices connected on the bus
+ * @bus: I3C bus exposed by this master
+ * @wq: workqueue used to execute IBI handlers. Can also be used by master
+ *      drivers if they need to postpone operations that need to take place
+ *      in a thread context. Typical examples are Hot Join processing which
+ *      requires taking the bus lock in maintenance, which in turn, can only
+ *      be done from a sleep-able context
+ *
+ * A &struct i3c_master_controller has to be registered to the I3C subsystem
+ * through i3c_master_register(). None of &struct i3c_master_controller fields
+ * should be set manually, just pass appropriate values to
+ * i3c_master_register().
+ */
+struct i3c_master_controller {
+        struct device dev;
+        struct i3c_dev_desc *this;
+        struct i2c_adapter i2c;
+        const struct i3c_master_controller_ops *ops;
+        unsigned int secondary : 1;
+        unsigned int init_done : 1;
+        struct {
+                struct list_head i3c;
+                struct list_head i2c;
+        } boardinfo;
+        struct i3c_bus bus;
+        struct workqueue_struct *wq;
+};
+
+/**
+ * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus
+ * @bus: the I3C bus
+ * @dev: an I2C device descriptor pointer updated to point to the current slot
+ *       at each iteration of the loop
+ *
+ * Iterate over all I2C devs present on the bus.
+ */
+#define i3c_bus_for_each_i2cdev(bus, dev)                               \
+        list_for_each_entry(dev, &(bus)->devs.i2c, common.node)
+
+/**
+ * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus
+ * @bus: the I3C bus
+ * @dev: and I3C device descriptor pointer updated to point to the current slot
+ *       at each iteration of the loop
+ *
+ * Iterate over all I3C devs present on the bus.
+ */
+#define i3c_bus_for_each_i3cdev(bus, dev)                               \
+        list_for_each_entry(dev, &(bus)->devs.i3c, common.node)
+
+int i3c_master_do_i2c_xfers(struct i3c_master_controller *master,
+                            const struct i2c_msg *xfers,
+                            int nxfers);
+
+int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
+                            u8 evts);
+int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
+                           u8 evts);
+int i3c_master_entdaa_locked(struct i3c_master_controller *master);
+int i3c_master_defslvs_locked(struct i3c_master_controller *master);
+
+int i3c_master_get_free_addr(struct i3c_master_controller *master,
+                             u8 start_addr);
+
+int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
+                                  u8 addr);
+int i3c_master_do_daa(struct i3c_master_controller *master);
+
+int i3c_master_set_info(struct i3c_master_controller *master,
+                        const struct i3c_device_info *info);
+
+int i3c_master_register(struct i3c_master_controller *master,
+                        struct device *parent,
+                        const struct i3c_master_controller_ops *ops,
+                        bool secondary);
+int i3c_master_unregister(struct i3c_master_controller *master);
+
+/**
+ * i3c_dev_get_master_data() - get master private data attached to an I3C
+ *                             device descriptor
+ * @dev: the I3C device descriptor to get private data from
+ *
+ * Return: the private data previously attached with i3c_dev_set_master_data()
+ *         or NULL if no data has been attached to the device.
+ */
+static inline void *i3c_dev_get_master_data(const struct i3c_dev_desc *dev)
+{
+        return dev->common.master_priv;
+}
+
+/**
+ * i3c_dev_set_master_data() - attach master private data to an I3C device
+ *                             descriptor
+ * @dev: the I3C device descriptor to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i3c_dev_get_master_data().
+ */
+static inline void i3c_dev_set_master_data(struct i3c_dev_desc *dev,
+                                           void *data)
+{
+        dev->common.master_priv = data;
+}
+
+/**
+ * i2c_dev_get_master_data() - get master private data attached to an I2C
+ *                             device descriptor
+ * @dev: the I2C device descriptor to get private data from
+ *
+ * Return: the private data previously attached with i2c_dev_set_master_data()
+ *         or NULL if no data has been attached to the device.
+ */
+static inline void *i2c_dev_get_master_data(const struct i2c_dev_desc *dev)
+{
+        return dev->common.master_priv;
+}
+
+/**
+ * i2c_dev_set_master_data() - attach master private data to an I2C device
+ *                             descriptor
+ * @dev: the I2C device descriptor to attach private data to
+ * @data: private data
+ *
+ * This functions allows a master controller to attach per-device private data
+ * which can then be retrieved with i2c_device_get_master_data().
+ */
+static inline void i2c_dev_set_master_data(struct i2c_dev_desc *dev,
+                                           void *data)
+{
+        dev->common.master_priv = data;
+}
+
+/**
+ * i3c_dev_get_master() - get master used to communicate with a device
+ * @dev: I3C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i3c_dev_get_master(struct i3c_dev_desc *dev)
+{
+        return dev->common.master;
+}
+
+/**
+ * i2c_dev_get_master() - get master used to communicate with a device
+ * @dev: I2C dev
+ *
+ * Return: the master controller driving @dev
+ */
+static inline struct i3c_master_controller *
+i2c_dev_get_master(struct i2c_dev_desc *dev)
+{
+        return dev->common.master;
+}
+
+/**
+ * i3c_master_get_bus() - get the bus attached to a master
+ * @master: master object
+ *
+ * Return: the I3C bus @master is connected to
+ */
+static inline struct i3c_bus *
+i3c_master_get_bus(struct i3c_master_controller *master)
+{
+        return &master->bus;
+}
+
+struct i3c_generic_ibi_pool;
+
+struct i3c_generic_ibi_pool *
+i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev,
+                           const struct i3c_ibi_setup *req);
+void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool);
+
+struct i3c_ibi_slot *
+i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool);
+void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
+                                  struct i3c_ibi_slot *slot);
+
+void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot);
+
+struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_dev_desc *dev);
+
+#endif /* I3C_MASTER_H */