1 files changed, 0 insertions, 40 deletions

diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c
index af3974a5e7c2..7d75465d97c7 100644
--- a/drivers/usb/host/ehci-pmcmsp.c
+++ b/drivers/usb/host/ehci-pmcmsp.c
@@ -68,9 +68,6 @@ static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
 
         /* set TWI GPIO USB_HOST_DEV pin high */
         gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-        gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1);
-#endif
 }
 
 /* called during probe() after chip reset completes */
@@ -248,33 +245,6 @@ void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
         usb_put_hcd(hcd);
 }
 
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-/*
- * Wrapper around the main ehci_irq.  Since both USB host controllers are
- * sharing the same IRQ, need to first determine whether we're the intended
- * recipient of this interrupt.
- */
-static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd)
-{
-        u32 int_src;
-        struct device *dev = hcd->self.controller;
-        struct platform_device *pdev;
-        struct mspusb_device *mdev;
-        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-        /* need to reverse-map a couple of containers to get our device */
-        pdev = to_platform_device(dev);
-        mdev = to_mspusb_device(pdev);
-
-        /* Check to see if this interrupt is for this host controller */
-        int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat);
-        if (int_src & (1 << pdev->id))
-                return ehci_irq(hcd);
-
-        /* Not for this device */
-        return IRQ_NONE;
-}
-#endif /* DUAL_USB */
-
 static const struct hc_driver ehci_msp_hc_driver = {
         .description =          hcd_name,
         .product_desc =         "PMC MSP EHCI",
@@ -283,11 +253,7 @@ static const struct hc_driver ehci_msp_hc_driver = {
         /*
          * generic hardware linkage
          */
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-        .irq =                  ehci_msp_irq,
-#else
         .irq =                  ehci_irq,
-#endif
         .flags =                HCD_MEMORY | HCD_USB2 | HCD_BH,
 
         /*
@@ -334,9 +300,6 @@ static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
                 return -ENODEV;
 
         gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-        gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO");
-#endif
 
         ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
 
@@ -351,9 +314,6 @@ static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
 
         /* free TWI GPIO USB_HOST_DEV pin */
         gpio_free(MSP_PIN_USB0_HOST_DEV);
-#ifdef CONFIG_MSP_HAS_DUAL_USB
-        gpio_free(MSP_PIN_USB1_HOST_DEV);
-#endif
 
         return 0;
 }