diff options
Diffstat (limited to 'drivers/thermal/intel/intel_pch_thermal.c')
-rw-r--r-- | drivers/thermal/intel/intel_pch_thermal.c | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c new file mode 100644 index 000000000000..8a7f69b4b022 --- /dev/null +++ b/drivers/thermal/intel/intel_pch_thermal.c | |||
@@ -0,0 +1,432 @@ | |||
1 | /* intel_pch_thermal.c - Intel PCH Thermal driver | ||
2 | * | ||
3 | * Copyright (c) 2015, Intel Corporation. | ||
4 | * | ||
5 | * Authors: | ||
6 | * Tushar Dave <tushar.n.dave@intel.com> | ||
7 | * | ||
8 | * This program is free software; you can redistribute it and/or modify it | ||
9 | * under the terms and conditions of the GNU General Public License, | ||
10 | * version 2, as published by the Free Software Foundation. | ||
11 | * | ||
12 | * This program is distributed in the hope it will be useful, but WITHOUT | ||
13 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | ||
14 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | ||
15 | * more details. | ||
16 | * | ||
17 | */ | ||
18 | |||
19 | #include <linux/module.h> | ||
20 | #include <linux/types.h> | ||
21 | #include <linux/init.h> | ||
22 | #include <linux/pci.h> | ||
23 | #include <linux/acpi.h> | ||
24 | #include <linux/thermal.h> | ||
25 | #include <linux/pm.h> | ||
26 | |||
27 | /* Intel PCH thermal Device IDs */ | ||
28 | #define PCH_THERMAL_DID_HSW_1 0x9C24 /* Haswell PCH */ | ||
29 | #define PCH_THERMAL_DID_HSW_2 0x8C24 /* Haswell PCH */ | ||
30 | #define PCH_THERMAL_DID_WPT 0x9CA4 /* Wildcat Point */ | ||
31 | #define PCH_THERMAL_DID_SKL 0x9D31 /* Skylake PCH */ | ||
32 | #define PCH_THERMAL_DID_SKL_H 0xA131 /* Skylake PCH 100 series */ | ||
33 | #define PCH_THERMAL_DID_CNL 0x9Df9 /* CNL PCH */ | ||
34 | #define PCH_THERMAL_DID_CNL_H 0xA379 /* CNL-H PCH */ | ||
35 | |||
36 | /* Wildcat Point-LP PCH Thermal registers */ | ||
37 | #define WPT_TEMP 0x0000 /* Temperature */ | ||
38 | #define WPT_TSC 0x04 /* Thermal Sensor Control */ | ||
39 | #define WPT_TSS 0x06 /* Thermal Sensor Status */ | ||
40 | #define WPT_TSEL 0x08 /* Thermal Sensor Enable and Lock */ | ||
41 | #define WPT_TSREL 0x0A /* Thermal Sensor Report Enable and Lock */ | ||
42 | #define WPT_TSMIC 0x0C /* Thermal Sensor SMI Control */ | ||
43 | #define WPT_CTT 0x0010 /* Catastrophic Trip Point */ | ||
44 | #define WPT_TAHV 0x0014 /* Thermal Alert High Value */ | ||
45 | #define WPT_TALV 0x0018 /* Thermal Alert Low Value */ | ||
46 | #define WPT_TL 0x00000040 /* Throttle Value */ | ||
47 | #define WPT_PHL 0x0060 /* PCH Hot Level */ | ||
48 | #define WPT_PHLC 0x62 /* PHL Control */ | ||
49 | #define WPT_TAS 0x80 /* Thermal Alert Status */ | ||
50 | #define WPT_TSPIEN 0x82 /* PCI Interrupt Event Enables */ | ||
51 | #define WPT_TSGPEN 0x84 /* General Purpose Event Enables */ | ||
52 | |||
53 | /* Wildcat Point-LP PCH Thermal Register bit definitions */ | ||
54 | #define WPT_TEMP_TSR 0x01ff /* Temp TS Reading */ | ||
55 | #define WPT_TSC_CPDE 0x01 /* Catastrophic Power-Down Enable */ | ||
56 | #define WPT_TSS_TSDSS 0x10 /* Thermal Sensor Dynamic Shutdown Status */ | ||
57 | #define WPT_TSS_GPES 0x08 /* GPE status */ | ||
58 | #define WPT_TSEL_ETS 0x01 /* Enable TS */ | ||
59 | #define WPT_TSEL_PLDB 0x80 /* TSEL Policy Lock-Down Bit */ | ||
60 | #define WPT_TL_TOL 0x000001FF /* T0 Level */ | ||
61 | #define WPT_TL_T1L 0x1ff00000 /* T1 Level */ | ||
62 | #define WPT_TL_TTEN 0x20000000 /* TT Enable */ | ||
63 | |||
64 | static char driver_name[] = "Intel PCH thermal driver"; | ||
65 | |||
66 | struct pch_thermal_device { | ||
67 | void __iomem *hw_base; | ||
68 | const struct pch_dev_ops *ops; | ||
69 | struct pci_dev *pdev; | ||
70 | struct thermal_zone_device *tzd; | ||
71 | int crt_trip_id; | ||
72 | unsigned long crt_temp; | ||
73 | int hot_trip_id; | ||
74 | unsigned long hot_temp; | ||
75 | int psv_trip_id; | ||
76 | unsigned long psv_temp; | ||
77 | bool bios_enabled; | ||
78 | }; | ||
79 | |||
80 | #ifdef CONFIG_ACPI | ||
81 | |||
82 | /* | ||
83 | * On some platforms, there is a companion ACPI device, which adds | ||
84 | * passive trip temperature using _PSV method. There is no specific | ||
85 | * passive temperature setting in MMIO interface of this PCI device. | ||
86 | */ | ||
87 | static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd, | ||
88 | int *nr_trips) | ||
89 | { | ||
90 | struct acpi_device *adev; | ||
91 | |||
92 | ptd->psv_trip_id = -1; | ||
93 | |||
94 | adev = ACPI_COMPANION(&ptd->pdev->dev); | ||
95 | if (adev) { | ||
96 | unsigned long long r; | ||
97 | acpi_status status; | ||
98 | |||
99 | status = acpi_evaluate_integer(adev->handle, "_PSV", NULL, | ||
100 | &r); | ||
101 | if (ACPI_SUCCESS(status)) { | ||
102 | unsigned long trip_temp; | ||
103 | |||
104 | trip_temp = DECI_KELVIN_TO_MILLICELSIUS(r); | ||
105 | if (trip_temp) { | ||
106 | ptd->psv_temp = trip_temp; | ||
107 | ptd->psv_trip_id = *nr_trips; | ||
108 | ++(*nr_trips); | ||
109 | } | ||
110 | } | ||
111 | } | ||
112 | } | ||
113 | #else | ||
114 | static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd, | ||
115 | int *nr_trips) | ||
116 | { | ||
117 | ptd->psv_trip_id = -1; | ||
118 | |||
119 | } | ||
120 | #endif | ||
121 | |||
122 | static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips) | ||
123 | { | ||
124 | u8 tsel; | ||
125 | u16 trip_temp; | ||
126 | |||
127 | *nr_trips = 0; | ||
128 | |||
129 | /* Check if BIOS has already enabled thermal sensor */ | ||
130 | if (WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL)) { | ||
131 | ptd->bios_enabled = true; | ||
132 | goto read_trips; | ||
133 | } | ||
134 | |||
135 | tsel = readb(ptd->hw_base + WPT_TSEL); | ||
136 | /* | ||
137 | * When TSEL's Policy Lock-Down bit is 1, TSEL become RO. | ||
138 | * If so, thermal sensor cannot enable. Bail out. | ||
139 | */ | ||
140 | if (tsel & WPT_TSEL_PLDB) { | ||
141 | dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n"); | ||
142 | return -ENODEV; | ||
143 | } | ||
144 | |||
145 | writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL); | ||
146 | if (!(WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL))) { | ||
147 | dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n"); | ||
148 | return -ENODEV; | ||
149 | } | ||
150 | |||
151 | read_trips: | ||
152 | ptd->crt_trip_id = -1; | ||
153 | trip_temp = readw(ptd->hw_base + WPT_CTT); | ||
154 | trip_temp &= 0x1FF; | ||
155 | if (trip_temp) { | ||
156 | /* Resolution of 1/2 degree C and an offset of -50C */ | ||
157 | ptd->crt_temp = trip_temp * 1000 / 2 - 50000; | ||
158 | ptd->crt_trip_id = 0; | ||
159 | ++(*nr_trips); | ||
160 | } | ||
161 | |||
162 | ptd->hot_trip_id = -1; | ||
163 | trip_temp = readw(ptd->hw_base + WPT_PHL); | ||
164 | trip_temp &= 0x1FF; | ||
165 | if (trip_temp) { | ||
166 | /* Resolution of 1/2 degree C and an offset of -50C */ | ||
167 | ptd->hot_temp = trip_temp * 1000 / 2 - 50000; | ||
168 | ptd->hot_trip_id = *nr_trips; | ||
169 | ++(*nr_trips); | ||
170 | } | ||
171 | |||
172 | pch_wpt_add_acpi_psv_trip(ptd, nr_trips); | ||
173 | |||
174 | return 0; | ||
175 | } | ||
176 | |||
177 | static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp) | ||
178 | { | ||
179 | u16 wpt_temp; | ||
180 | |||
181 | wpt_temp = WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP); | ||
182 | |||
183 | /* Resolution of 1/2 degree C and an offset of -50C */ | ||
184 | *temp = (wpt_temp * 1000 / 2 - 50000); | ||
185 | |||
186 | return 0; | ||
187 | } | ||
188 | |||
189 | static int pch_wpt_suspend(struct pch_thermal_device *ptd) | ||
190 | { | ||
191 | u8 tsel; | ||
192 | |||
193 | if (ptd->bios_enabled) | ||
194 | return 0; | ||
195 | |||
196 | tsel = readb(ptd->hw_base + WPT_TSEL); | ||
197 | |||
198 | writeb(tsel & 0xFE, ptd->hw_base + WPT_TSEL); | ||
199 | |||
200 | return 0; | ||
201 | } | ||
202 | |||
203 | static int pch_wpt_resume(struct pch_thermal_device *ptd) | ||
204 | { | ||
205 | u8 tsel; | ||
206 | |||
207 | if (ptd->bios_enabled) | ||
208 | return 0; | ||
209 | |||
210 | tsel = readb(ptd->hw_base + WPT_TSEL); | ||
211 | |||
212 | writeb(tsel | WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL); | ||
213 | |||
214 | return 0; | ||
215 | } | ||
216 | |||
217 | struct pch_dev_ops { | ||
218 | int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips); | ||
219 | int (*get_temp)(struct pch_thermal_device *ptd, int *temp); | ||
220 | int (*suspend)(struct pch_thermal_device *ptd); | ||
221 | int (*resume)(struct pch_thermal_device *ptd); | ||
222 | }; | ||
223 | |||
224 | |||
225 | /* dev ops for Wildcat Point */ | ||
226 | static const struct pch_dev_ops pch_dev_ops_wpt = { | ||
227 | .hw_init = pch_wpt_init, | ||
228 | .get_temp = pch_wpt_get_temp, | ||
229 | .suspend = pch_wpt_suspend, | ||
230 | .resume = pch_wpt_resume, | ||
231 | }; | ||
232 | |||
233 | static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp) | ||
234 | { | ||
235 | struct pch_thermal_device *ptd = tzd->devdata; | ||
236 | |||
237 | return ptd->ops->get_temp(ptd, temp); | ||
238 | } | ||
239 | |||
240 | static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip, | ||
241 | enum thermal_trip_type *type) | ||
242 | { | ||
243 | struct pch_thermal_device *ptd = tzd->devdata; | ||
244 | |||
245 | if (ptd->crt_trip_id == trip) | ||
246 | *type = THERMAL_TRIP_CRITICAL; | ||
247 | else if (ptd->hot_trip_id == trip) | ||
248 | *type = THERMAL_TRIP_HOT; | ||
249 | else if (ptd->psv_trip_id == trip) | ||
250 | *type = THERMAL_TRIP_PASSIVE; | ||
251 | else | ||
252 | return -EINVAL; | ||
253 | |||
254 | return 0; | ||
255 | } | ||
256 | |||
257 | static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp) | ||
258 | { | ||
259 | struct pch_thermal_device *ptd = tzd->devdata; | ||
260 | |||
261 | if (ptd->crt_trip_id == trip) | ||
262 | *temp = ptd->crt_temp; | ||
263 | else if (ptd->hot_trip_id == trip) | ||
264 | *temp = ptd->hot_temp; | ||
265 | else if (ptd->psv_trip_id == trip) | ||
266 | *temp = ptd->psv_temp; | ||
267 | else | ||
268 | return -EINVAL; | ||
269 | |||
270 | return 0; | ||
271 | } | ||
272 | |||
273 | static struct thermal_zone_device_ops tzd_ops = { | ||
274 | .get_temp = pch_thermal_get_temp, | ||
275 | .get_trip_type = pch_get_trip_type, | ||
276 | .get_trip_temp = pch_get_trip_temp, | ||
277 | }; | ||
278 | |||
279 | enum board_ids { | ||
280 | board_hsw, | ||
281 | board_wpt, | ||
282 | board_skl, | ||
283 | board_cnl, | ||
284 | }; | ||
285 | |||
286 | static const struct board_info { | ||
287 | const char *name; | ||
288 | const struct pch_dev_ops *ops; | ||
289 | } board_info[] = { | ||
290 | [board_hsw] = { | ||
291 | .name = "pch_haswell", | ||
292 | .ops = &pch_dev_ops_wpt, | ||
293 | }, | ||
294 | [board_wpt] = { | ||
295 | .name = "pch_wildcat_point", | ||
296 | .ops = &pch_dev_ops_wpt, | ||
297 | }, | ||
298 | [board_skl] = { | ||
299 | .name = "pch_skylake", | ||
300 | .ops = &pch_dev_ops_wpt, | ||
301 | }, | ||
302 | [board_cnl] = { | ||
303 | .name = "pch_cannonlake", | ||
304 | .ops = &pch_dev_ops_wpt, | ||
305 | }, | ||
306 | }; | ||
307 | |||
308 | static int intel_pch_thermal_probe(struct pci_dev *pdev, | ||
309 | const struct pci_device_id *id) | ||
310 | { | ||
311 | enum board_ids board_id = id->driver_data; | ||
312 | const struct board_info *bi = &board_info[board_id]; | ||
313 | struct pch_thermal_device *ptd; | ||
314 | int err; | ||
315 | int nr_trips; | ||
316 | |||
317 | ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL); | ||
318 | if (!ptd) | ||
319 | return -ENOMEM; | ||
320 | |||
321 | ptd->ops = bi->ops; | ||
322 | |||
323 | pci_set_drvdata(pdev, ptd); | ||
324 | ptd->pdev = pdev; | ||
325 | |||
326 | err = pci_enable_device(pdev); | ||
327 | if (err) { | ||
328 | dev_err(&pdev->dev, "failed to enable pci device\n"); | ||
329 | return err; | ||
330 | } | ||
331 | |||
332 | err = pci_request_regions(pdev, driver_name); | ||
333 | if (err) { | ||
334 | dev_err(&pdev->dev, "failed to request pci region\n"); | ||
335 | goto error_disable; | ||
336 | } | ||
337 | |||
338 | ptd->hw_base = pci_ioremap_bar(pdev, 0); | ||
339 | if (!ptd->hw_base) { | ||
340 | err = -ENOMEM; | ||
341 | dev_err(&pdev->dev, "failed to map mem base\n"); | ||
342 | goto error_release; | ||
343 | } | ||
344 | |||
345 | err = ptd->ops->hw_init(ptd, &nr_trips); | ||
346 | if (err) | ||
347 | goto error_cleanup; | ||
348 | |||
349 | ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd, | ||
350 | &tzd_ops, NULL, 0, 0); | ||
351 | if (IS_ERR(ptd->tzd)) { | ||
352 | dev_err(&pdev->dev, "Failed to register thermal zone %s\n", | ||
353 | bi->name); | ||
354 | err = PTR_ERR(ptd->tzd); | ||
355 | goto error_cleanup; | ||
356 | } | ||
357 | |||
358 | return 0; | ||
359 | |||
360 | error_cleanup: | ||
361 | iounmap(ptd->hw_base); | ||
362 | error_release: | ||
363 | pci_release_regions(pdev); | ||
364 | error_disable: | ||
365 | pci_disable_device(pdev); | ||
366 | dev_err(&pdev->dev, "pci device failed to probe\n"); | ||
367 | return err; | ||
368 | } | ||
369 | |||
370 | static void intel_pch_thermal_remove(struct pci_dev *pdev) | ||
371 | { | ||
372 | struct pch_thermal_device *ptd = pci_get_drvdata(pdev); | ||
373 | |||
374 | thermal_zone_device_unregister(ptd->tzd); | ||
375 | iounmap(ptd->hw_base); | ||
376 | pci_set_drvdata(pdev, NULL); | ||
377 | pci_release_region(pdev, 0); | ||
378 | pci_disable_device(pdev); | ||
379 | } | ||
380 | |||
381 | static int intel_pch_thermal_suspend(struct device *device) | ||
382 | { | ||
383 | struct pci_dev *pdev = to_pci_dev(device); | ||
384 | struct pch_thermal_device *ptd = pci_get_drvdata(pdev); | ||
385 | |||
386 | return ptd->ops->suspend(ptd); | ||
387 | } | ||
388 | |||
389 | static int intel_pch_thermal_resume(struct device *device) | ||
390 | { | ||
391 | struct pci_dev *pdev = to_pci_dev(device); | ||
392 | struct pch_thermal_device *ptd = pci_get_drvdata(pdev); | ||
393 | |||
394 | return ptd->ops->resume(ptd); | ||
395 | } | ||
396 | |||
397 | static const struct pci_device_id intel_pch_thermal_id[] = { | ||
398 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1), | ||
399 | .driver_data = board_hsw, }, | ||
400 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2), | ||
401 | .driver_data = board_hsw, }, | ||
402 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT), | ||
403 | .driver_data = board_wpt, }, | ||
404 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL), | ||
405 | .driver_data = board_skl, }, | ||
406 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H), | ||
407 | .driver_data = board_skl, }, | ||
408 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL), | ||
409 | .driver_data = board_cnl, }, | ||
410 | { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H), | ||
411 | .driver_data = board_cnl, }, | ||
412 | { 0, }, | ||
413 | }; | ||
414 | MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id); | ||
415 | |||
416 | static const struct dev_pm_ops intel_pch_pm_ops = { | ||
417 | .suspend = intel_pch_thermal_suspend, | ||
418 | .resume = intel_pch_thermal_resume, | ||
419 | }; | ||
420 | |||
421 | static struct pci_driver intel_pch_thermal_driver = { | ||
422 | .name = "intel_pch_thermal", | ||
423 | .id_table = intel_pch_thermal_id, | ||
424 | .probe = intel_pch_thermal_probe, | ||
425 | .remove = intel_pch_thermal_remove, | ||
426 | .driver.pm = &intel_pch_pm_ops, | ||
427 | }; | ||
428 | |||
429 | module_pci_driver(intel_pch_thermal_driver); | ||
430 | |||
431 | MODULE_LICENSE("GPL v2"); | ||
432 | MODULE_DESCRIPTION("Intel PCH Thermal driver"); | ||