1 files changed, 202 insertions, 14 deletions

diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 5c0356fb6310..062ab34b86f8 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -58,6 +58,8 @@ static const struct pm8001_chip_info pm8001_chips[] = {
         [chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
         [chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
         [chip_8006] = {0,  16, &pm8001_80xx_dispatch,},
+        [chip_8070] = {0,  8, &pm8001_80xx_dispatch,},
+        [chip_8072] = {0,  16, &pm8001_80xx_dispatch,},
 };
 static int pm8001_id;
 
@@ -88,7 +90,6 @@ static struct scsi_host_template pm8001_sht = {
         .target_destroy         = sas_target_destroy,
         .ioctl                  = sas_ioctl,
         .shost_attrs            = pm8001_host_attrs,
-        .use_blk_tags           = 1,
         .track_queue_depth      = 1,
 };
 
@@ -480,7 +481,8 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 
 #ifdef PM8001_USE_TASKLET
         /* Tasklet for non msi-x interrupt handler */
-        if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+        if ((!pdev->msix_cap || !pci_msi_enabled())
+            || (pm8001_ha->chip_id == chip_8001))
                 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
                         (unsigned long)&(pm8001_ha->irq_vector[0]));
         else
@@ -634,6 +636,11 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
                         payload.minor_function = 0;
                         payload.length = 128;
                 }
+        } else if ((pm8001_ha->chip_id == chip_8070 ||
+                        pm8001_ha->chip_id == chip_8072) &&
+                        pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+                payload.minor_function = 4;
+                payload.length = 4096;
         } else {
                 payload.minor_function = 1;
                 payload.length = 4096;
@@ -660,6 +667,11 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
                         else if (deviceid == 0x0042)
                                 pm8001_ha->sas_addr[j] =
                                         payload.func_specific[0x010 + i];
+                } else if ((pm8001_ha->chip_id == chip_8070 ||
+                                pm8001_ha->chip_id == chip_8072) &&
+                                pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+                        pm8001_ha->sas_addr[j] =
+                                        payload.func_specific[0x010 + i];
                 } else
                         pm8001_ha->sas_addr[j] =
                                         payload.func_specific[0x804 + i];
@@ -720,6 +732,153 @@ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
         return 0;
 }
 
+struct pm8001_mpi3_phy_pg_trx_config {
+        u32 LaneLosCfg;
+        u32 LanePgaCfg1;
+        u32 LanePisoCfg1;
+        u32 LanePisoCfg2;
+        u32 LanePisoCfg3;
+        u32 LanePisoCfg4;
+        u32 LanePisoCfg5;
+        u32 LanePisoCfg6;
+        u32 LaneBctCtrl;
+};
+
+/**
+ * pm8001_get_internal_phy_settings : Retrieves the internal PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
+                struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+        phycfg->LaneLosCfg   = 0x00000132;
+        phycfg->LanePgaCfg1  = 0x00203949;
+        phycfg->LanePisoCfg1 = 0x000000FF;
+        phycfg->LanePisoCfg2 = 0xFF000001;
+        phycfg->LanePisoCfg3 = 0xE7011300;
+        phycfg->LanePisoCfg4 = 0x631C40C0;
+        phycfg->LanePisoCfg5 = 0xF8102036;
+        phycfg->LanePisoCfg6 = 0xF74A1000;
+        phycfg->LaneBctCtrl  = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_external_phy_settings : Retrieves the external PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
+                struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+        phycfg->LaneLosCfg   = 0x00000132;
+        phycfg->LanePgaCfg1  = 0x00203949;
+        phycfg->LanePisoCfg1 = 0x000000FF;
+        phycfg->LanePisoCfg2 = 0xFF000001;
+        phycfg->LanePisoCfg3 = 0xE7011300;
+        phycfg->LanePisoCfg4 = 0x63349140;
+        phycfg->LanePisoCfg5 = 0xF8102036;
+        phycfg->LanePisoCfg6 = 0xF80D9300;
+        phycfg->LaneBctCtrl  = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_phy_mask : Retrieves the mask that denotes if a PHY is int/ext
+ * @pm8001_ha : our adapter
+ * @phymask : The PHY mask
+ */
+static
+void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
+{
+        switch (pm8001_ha->pdev->subsystem_device) {
+        case 0x0070: /* H1280 - 8 external 0 internal */
+        case 0x0072: /* H12F0 - 16 external 0 internal */
+                *phymask = 0x0000;
+                break;
+
+        case 0x0071: /* H1208 - 0 external 8 internal */
+        case 0x0073: /* H120F - 0 external 16 internal */
+                *phymask = 0xFFFF;
+                break;
+
+        case 0x0080: /* H1244 - 4 external 4 internal */
+                *phymask = 0x00F0;
+                break;
+
+        case 0x0081: /* H1248 - 4 external 8 internal */
+                *phymask = 0x0FF0;
+                break;
+
+        case 0x0082: /* H1288 - 8 external 8 internal */
+                *phymask = 0xFF00;
+                break;
+
+        default:
+                PM8001_INIT_DBG(pm8001_ha,
+                        pm8001_printk("Unknown subsystem device=0x%.04x",
+                                pm8001_ha->pdev->subsystem_device));
+        }
+}
+
+/**
+ * pm8001_set_phy_settings_ven_117c_12Gb : Configure ATTO 12Gb PHY settings
+ * @pm8001_ha : our adapter
+ */
+static
+int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
+{
+        struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
+        struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
+        int phymask = 0;
+        int i = 0;
+
+        memset(&phycfg_int, 0, sizeof(phycfg_int));
+        memset(&phycfg_ext, 0, sizeof(phycfg_ext));
+
+        pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
+        pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
+        pm8001_get_phy_mask(pm8001_ha, &phymask);
+
+        for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+                if (phymask & (1 << i)) {/* Internal PHY */
+                        pm8001_set_phy_profile_single(pm8001_ha, i,
+                                        sizeof(phycfg_int) / sizeof(u32),
+                                        (u32 *)&phycfg_int);
+
+                } else { /* External PHY */
+                        pm8001_set_phy_profile_single(pm8001_ha, i,
+                                        sizeof(phycfg_ext) / sizeof(u32),
+                                        (u32 *)&phycfg_ext);
+                }
+        }
+
+        return 0;
+}
+
+/**
+ * pm8001_configure_phy_settings : Configures PHY settings based on vendor ID.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
+{
+        switch (pm8001_ha->pdev->subsystem_vendor) {
+        case PCI_VENDOR_ID_ATTO:
+                if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
+                        return 0;
+                else
+                        return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
+
+        case PCI_VENDOR_ID_ADAPTEC2:
+        case 0:
+                return 0;
+
+        default:
+                return pm8001_get_phy_settings_info(pm8001_ha);
+        }
+}
+
 #ifdef PM8001_USE_MSIX
 /**
  * pm8001_setup_msix - enable MSI-X interrupt
@@ -792,7 +951,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
         pdev = pm8001_ha->pdev;
 
 #ifdef PM8001_USE_MSIX
-        if (pdev->msix_cap)
+        if (pdev->msix_cap && pci_msi_enabled())
                 return pm8001_setup_msix(pm8001_ha);
         else {
                 PM8001_INIT_DBG(pm8001_ha,
@@ -803,6 +962,8 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 
 intx:
         /* initialize the INT-X interrupt */
+        pm8001_ha->irq_vector[0].irq_id = 0;
+        pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
         rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
                 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
         return rc;
@@ -902,12 +1063,9 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
 
         pm8001_init_sas_add(pm8001_ha);
         /* phy setting support for motherboard controller */
-        if (pdev->subsystem_vendor != PCI_VENDOR_ID_ADAPTEC2 &&
-                pdev->subsystem_vendor != 0) {
-                rc = pm8001_get_phy_settings_info(pm8001_ha);
-                if (rc)
-                        goto err_out_shost;
-        }
+        if (pm8001_configure_phy_settings(pm8001_ha))
+                goto err_out_shost;
+
         pm8001_post_sas_ha_init(shost, chip);
         rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
         if (rc)
@@ -937,10 +1095,10 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
         struct pm8001_hba_info *pm8001_ha;
         int i, j;
         pm8001_ha = sha->lldd_ha;
+        scsi_remove_host(pm8001_ha->shost);
         sas_unregister_ha(sha);
         sas_remove_host(pm8001_ha->shost);
         list_del(&pm8001_ha->list);
-        scsi_remove_host(pm8001_ha->shost);
         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 
@@ -956,7 +1114,8 @@ static void pm8001_pci_remove(struct pci_dev *pdev)
 #endif
 #ifdef PM8001_USE_TASKLET
         /* For non-msix and msix interrupts */
-        if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+        if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+            (pm8001_ha->chip_id == chip_8001))
                 tasklet_kill(&pm8001_ha->tasklet[0]);
         else
                 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
@@ -1005,7 +1164,8 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 #endif
 #ifdef PM8001_USE_TASKLET
         /* For non-msix and msix interrupts */
-        if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+        if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+            (pm8001_ha->chip_id == chip_8001))
                 tasklet_kill(&pm8001_ha->tasklet[0]);
         else
                 for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
@@ -1074,7 +1234,8 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
                 goto err_out_disable;
 #ifdef PM8001_USE_TASKLET
         /*  Tasklet for non msi-x interrupt handler */
-        if ((!pdev->msix_cap) || (pm8001_ha->chip_id == chip_8001))
+        if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+            (pm8001_ha->chip_id == chip_8001))
                 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
                         (unsigned long)&(pm8001_ha->irq_vector[0]));
         else
@@ -1087,6 +1248,19 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
         }
+
+        /* Chip documentation for the 8070 and 8072 SPCv    */
+        /* states that a 500ms minimum delay is required    */
+        /* before issuing commands.  Otherwise, the firmare */
+        /* will enter an unrecoverable state.               */
+
+        if (pm8001_ha->chip_id == chip_8070 ||
+                pm8001_ha->chip_id == chip_8072) {
+                mdelay(500);
+        }
+
+        /* Spin up the PHYs */
+
         pm8001_ha->flags = PM8001F_RUN_TIME;
         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
                 pm8001_ha->phy[i].enable_completion = &completion;
@@ -1165,6 +1339,20 @@ static struct pci_device_id pm8001_pci_table[] = {
                 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
                 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
+        { PCI_VENDOR_ID_ATTO, 0x8070,
+                PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
+        { PCI_VENDOR_ID_ATTO, 0x8070,
+                PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
+        { PCI_VENDOR_ID_ATTO, 0x8072,
+                PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
+        { PCI_VENDOR_ID_ATTO, 0x8072,
+                PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
+        { PCI_VENDOR_ID_ATTO, 0x8070,
+                PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
+        { PCI_VENDOR_ID_ATTO, 0x8072,
+                PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
+        { PCI_VENDOR_ID_ATTO, 0x8072,
+                PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
         {} /* terminate list */
 };
 
@@ -1220,7 +1408,7 @@ MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
 MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
 MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
 MODULE_DESCRIPTION(
-                "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077 "
+                "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
                 "SAS/SATA controller driver");
 MODULE_VERSION(DRV_VERSION);
 MODULE_LICENSE("GPL");