aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/tehuti/tehuti.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/tehuti/tehuti.c')
-rw-r--r--drivers/net/ethernet/tehuti/tehuti.c2470
1 files changed, 2470 insertions, 0 deletions
diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
new file mode 100644
index 000000000000..3a90af6d111c
--- /dev/null
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -0,0 +1,2470 @@
1/*
2 * Tehuti Networks(R) Network Driver
3 * ethtool interface implementation
4 * Copyright (C) 2007 Tehuti Networks Ltd. All rights reserved
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
12/*
13 * RX HW/SW interaction overview
14 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
15 * There are 2 types of RX communication channels between driver and NIC.
16 * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
17 * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
18 * info about buffer's location, size and ID. An ID field is used to identify a
19 * buffer when it's returned with data via RXD Fifo (see below)
20 * 2) RX Data Fifo - RXD - holds descriptors of full buffers. This Fifo is
21 * filled by HW and is readen by SW. Each descriptor holds status and ID.
22 * HW pops descriptor from RXF Fifo, stores ID, fills buffer with incoming data,
23 * via dma moves it into host memory, builds new RXD descriptor with same ID,
24 * pushes it into RXD Fifo and raises interrupt to indicate new RX data.
25 *
26 * Current NIC configuration (registers + firmware) makes NIC use 2 RXF Fifos.
27 * One holds 1.5K packets and another - 26K packets. Depending on incoming
28 * packet size, HW desides on a RXF Fifo to pop buffer from. When packet is
29 * filled with data, HW builds new RXD descriptor for it and push it into single
30 * RXD Fifo.
31 *
32 * RX SW Data Structures
33 * ~~~~~~~~~~~~~~~~~~~~~
34 * skb db - used to keep track of all skbs owned by SW and their dma addresses.
35 * For RX case, ownership lasts from allocating new empty skb for RXF until
36 * accepting full skb from RXD and passing it to OS. Each RXF Fifo has its own
37 * skb db. Implemented as array with bitmask.
38 * fifo - keeps info about fifo's size and location, relevant HW registers,
39 * usage and skb db. Each RXD and RXF Fifo has its own fifo structure.
40 * Implemented as simple struct.
41 *
42 * RX SW Execution Flow
43 * ~~~~~~~~~~~~~~~~~~~~
44 * Upon initialization (ifconfig up) driver creates RX fifos and initializes
45 * relevant registers. At the end of init phase, driver enables interrupts.
46 * NIC sees that there is no RXF buffers and raises
47 * RD_INTR interrupt, isr fills skbs and Rx begins.
48 * Driver has two receive operation modes:
49 * NAPI - interrupt-driven mixed with polling
50 * interrupt-driven only
51 *
52 * Interrupt-driven only flow is following. When buffer is ready, HW raises
53 * interrupt and isr is called. isr collects all available packets
54 * (bdx_rx_receive), refills skbs (bdx_rx_alloc_skbs) and exit.
55
56 * Rx buffer allocation note
57 * ~~~~~~~~~~~~~~~~~~~~~~~~~
58 * Driver cares to feed such amount of RxF descriptors that respective amount of
59 * RxD descriptors can not fill entire RxD fifo. The main reason is lack of
60 * overflow check in Bordeaux for RxD fifo free/used size.
61 * FIXME: this is NOT fully implemented, more work should be done
62 *
63 */
64
65#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
66
67#include "tehuti.h"
68
69static DEFINE_PCI_DEVICE_TABLE(bdx_pci_tbl) = {
70 { PCI_VDEVICE(TEHUTI, 0x3009), },
71 { PCI_VDEVICE(TEHUTI, 0x3010), },
72 { PCI_VDEVICE(TEHUTI, 0x3014), },
73 { 0 }
74};
75
76MODULE_DEVICE_TABLE(pci, bdx_pci_tbl);
77
78/* Definitions needed by ISR or NAPI functions */
79static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f);
80static void bdx_tx_cleanup(struct bdx_priv *priv);
81static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget);
82
83/* Definitions needed by FW loading */
84static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size);
85
86/* Definitions needed by hw_start */
87static int bdx_tx_init(struct bdx_priv *priv);
88static int bdx_rx_init(struct bdx_priv *priv);
89
90/* Definitions needed by bdx_close */
91static void bdx_rx_free(struct bdx_priv *priv);
92static void bdx_tx_free(struct bdx_priv *priv);
93
94/* Definitions needed by bdx_probe */
95static void bdx_set_ethtool_ops(struct net_device *netdev);
96
97/*************************************************************************
98 * Print Info *
99 *************************************************************************/
100
101static void print_hw_id(struct pci_dev *pdev)
102{
103 struct pci_nic *nic = pci_get_drvdata(pdev);
104 u16 pci_link_status = 0;
105 u16 pci_ctrl = 0;
106
107 pci_read_config_word(pdev, PCI_LINK_STATUS_REG, &pci_link_status);
108 pci_read_config_word(pdev, PCI_DEV_CTRL_REG, &pci_ctrl);
109
110 pr_info("%s%s\n", BDX_NIC_NAME,
111 nic->port_num == 1 ? "" : ", 2-Port");
112 pr_info("srom 0x%x fpga %d build %u lane# %d max_pl 0x%x mrrs 0x%x\n",
113 readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF,
114 readl(nic->regs + FPGA_SEED),
115 GET_LINK_STATUS_LANES(pci_link_status),
116 GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl));
117}
118
119static void print_fw_id(struct pci_nic *nic)
120{
121 pr_info("fw 0x%x\n", readl(nic->regs + FW_VER));
122}
123
124static void print_eth_id(struct net_device *ndev)
125{
126 netdev_info(ndev, "%s, Port %c\n",
127 BDX_NIC_NAME, (ndev->if_port == 0) ? 'A' : 'B');
128
129}
130
131/*************************************************************************
132 * Code *
133 *************************************************************************/
134
135#define bdx_enable_interrupts(priv) \
136 do { WRITE_REG(priv, regIMR, IR_RUN); } while (0)
137#define bdx_disable_interrupts(priv) \
138 do { WRITE_REG(priv, regIMR, 0); } while (0)
139
140/* bdx_fifo_init
141 * create TX/RX descriptor fifo for host-NIC communication.
142 * 1K extra space is allocated at the end of the fifo to simplify
143 * processing of descriptors that wraps around fifo's end
144 * @priv - NIC private structure
145 * @f - fifo to initialize
146 * @fsz_type - fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB
147 * @reg_XXX - offsets of registers relative to base address
148 *
149 * Returns 0 on success, negative value on failure
150 *
151 */
152static int
153bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type,
154 u16 reg_CFG0, u16 reg_CFG1, u16 reg_RPTR, u16 reg_WPTR)
155{
156 u16 memsz = FIFO_SIZE * (1 << fsz_type);
157
158 memset(f, 0, sizeof(struct fifo));
159 /* pci_alloc_consistent gives us 4k-aligned memory */
160 f->va = pci_alloc_consistent(priv->pdev,
161 memsz + FIFO_EXTRA_SPACE, &f->da);
162 if (!f->va) {
163 pr_err("pci_alloc_consistent failed\n");
164 RET(-ENOMEM);
165 }
166 f->reg_CFG0 = reg_CFG0;
167 f->reg_CFG1 = reg_CFG1;
168 f->reg_RPTR = reg_RPTR;
169 f->reg_WPTR = reg_WPTR;
170 f->rptr = 0;
171 f->wptr = 0;
172 f->memsz = memsz;
173 f->size_mask = memsz - 1;
174 WRITE_REG(priv, reg_CFG0, (u32) ((f->da & TX_RX_CFG0_BASE) | fsz_type));
175 WRITE_REG(priv, reg_CFG1, H32_64(f->da));
176
177 RET(0);
178}
179
180/* bdx_fifo_free - free all resources used by fifo
181 * @priv - NIC private structure
182 * @f - fifo to release
183 */
184static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f)
185{
186 ENTER;
187 if (f->va) {
188 pci_free_consistent(priv->pdev,
189 f->memsz + FIFO_EXTRA_SPACE, f->va, f->da);
190 f->va = NULL;
191 }
192 RET();
193}
194
195/*
196 * bdx_link_changed - notifies OS about hw link state.
197 * @bdx_priv - hw adapter structure
198 */
199static void bdx_link_changed(struct bdx_priv *priv)
200{
201 u32 link = READ_REG(priv, regMAC_LNK_STAT) & MAC_LINK_STAT;
202
203 if (!link) {
204 if (netif_carrier_ok(priv->ndev)) {
205 netif_stop_queue(priv->ndev);
206 netif_carrier_off(priv->ndev);
207 netdev_err(priv->ndev, "Link Down\n");
208 }
209 } else {
210 if (!netif_carrier_ok(priv->ndev)) {
211 netif_wake_queue(priv->ndev);
212 netif_carrier_on(priv->ndev);
213 netdev_err(priv->ndev, "Link Up\n");
214 }
215 }
216}
217
218static void bdx_isr_extra(struct bdx_priv *priv, u32 isr)
219{
220 if (isr & IR_RX_FREE_0) {
221 bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
222 DBG("RX_FREE_0\n");
223 }
224
225 if (isr & IR_LNKCHG0)
226 bdx_link_changed(priv);
227
228 if (isr & IR_PCIE_LINK)
229 netdev_err(priv->ndev, "PCI-E Link Fault\n");
230
231 if (isr & IR_PCIE_TOUT)
232 netdev_err(priv->ndev, "PCI-E Time Out\n");
233
234}
235
236/* bdx_isr - Interrupt Service Routine for Bordeaux NIC
237 * @irq - interrupt number
238 * @ndev - network device
239 * @regs - CPU registers
240 *
241 * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise
242 *
243 * It reads ISR register to know interrupt reasons, and proceed them one by one.
244 * Reasons of interest are:
245 * RX_DESC - new packet has arrived and RXD fifo holds its descriptor
246 * RX_FREE - number of free Rx buffers in RXF fifo gets low
247 * TX_FREE - packet was transmited and RXF fifo holds its descriptor
248 */
249
250static irqreturn_t bdx_isr_napi(int irq, void *dev)
251{
252 struct net_device *ndev = dev;
253 struct bdx_priv *priv = netdev_priv(ndev);
254 u32 isr;
255
256 ENTER;
257 isr = (READ_REG(priv, regISR) & IR_RUN);
258 if (unlikely(!isr)) {
259 bdx_enable_interrupts(priv);
260 return IRQ_NONE; /* Not our interrupt */
261 }
262
263 if (isr & IR_EXTRA)
264 bdx_isr_extra(priv, isr);
265
266 if (isr & (IR_RX_DESC_0 | IR_TX_FREE_0)) {
267 if (likely(napi_schedule_prep(&priv->napi))) {
268 __napi_schedule(&priv->napi);
269 RET(IRQ_HANDLED);
270 } else {
271 /* NOTE: we get here if intr has slipped into window
272 * between these lines in bdx_poll:
273 * bdx_enable_interrupts(priv);
274 * return 0;
275 * currently intrs are disabled (since we read ISR),
276 * and we have failed to register next poll.
277 * so we read the regs to trigger chip
278 * and allow further interupts. */
279 READ_REG(priv, regTXF_WPTR_0);
280 READ_REG(priv, regRXD_WPTR_0);
281 }
282 }
283
284 bdx_enable_interrupts(priv);
285 RET(IRQ_HANDLED);
286}
287
288static int bdx_poll(struct napi_struct *napi, int budget)
289{
290 struct bdx_priv *priv = container_of(napi, struct bdx_priv, napi);
291 int work_done;
292
293 ENTER;
294 bdx_tx_cleanup(priv);
295 work_done = bdx_rx_receive(priv, &priv->rxd_fifo0, budget);
296 if ((work_done < budget) ||
297 (priv->napi_stop++ >= 30)) {
298 DBG("rx poll is done. backing to isr-driven\n");
299
300 /* from time to time we exit to let NAPI layer release
301 * device lock and allow waiting tasks (eg rmmod) to advance) */
302 priv->napi_stop = 0;
303
304 napi_complete(napi);
305 bdx_enable_interrupts(priv);
306 }
307 return work_done;
308}
309
310/* bdx_fw_load - loads firmware to NIC
311 * @priv - NIC private structure
312 * Firmware is loaded via TXD fifo, so it must be initialized first.
313 * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC
314 * can have few of them). So all drivers use semaphore register to choose one
315 * that will actually load FW to NIC.
316 */
317
318static int bdx_fw_load(struct bdx_priv *priv)
319{
320 const struct firmware *fw = NULL;
321 int master, i;
322 int rc;
323
324 ENTER;
325 master = READ_REG(priv, regINIT_SEMAPHORE);
326 if (!READ_REG(priv, regINIT_STATUS) && master) {
327 rc = request_firmware(&fw, "tehuti/bdx.bin", &priv->pdev->dev);
328 if (rc)
329 goto out;
330 bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size);
331 mdelay(100);
332 }
333 for (i = 0; i < 200; i++) {
334 if (READ_REG(priv, regINIT_STATUS)) {
335 rc = 0;
336 goto out;
337 }
338 mdelay(2);
339 }
340 rc = -EIO;
341out:
342 if (master)
343 WRITE_REG(priv, regINIT_SEMAPHORE, 1);
344 if (fw)
345 release_firmware(fw);
346
347 if (rc) {
348 netdev_err(priv->ndev, "firmware loading failed\n");
349 if (rc == -EIO)
350 DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n",
351 READ_REG(priv, regVPC),
352 READ_REG(priv, regVIC),
353 READ_REG(priv, regINIT_STATUS), i);
354 RET(rc);
355 } else {
356 DBG("%s: firmware loading success\n", priv->ndev->name);
357 RET(0);
358 }
359}
360
361static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv)
362{
363 u32 val;
364
365 ENTER;
366 DBG("mac0=%x mac1=%x mac2=%x\n",
367 READ_REG(priv, regUNC_MAC0_A),
368 READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A));
369
370 val = (ndev->dev_addr[0] << 8) | (ndev->dev_addr[1]);
371 WRITE_REG(priv, regUNC_MAC2_A, val);
372 val = (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]);
373 WRITE_REG(priv, regUNC_MAC1_A, val);
374 val = (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]);
375 WRITE_REG(priv, regUNC_MAC0_A, val);
376
377 DBG("mac0=%x mac1=%x mac2=%x\n",
378 READ_REG(priv, regUNC_MAC0_A),
379 READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A));
380 RET();
381}
382
383/* bdx_hw_start - inits registers and starts HW's Rx and Tx engines
384 * @priv - NIC private structure
385 */
386static int bdx_hw_start(struct bdx_priv *priv)
387{
388 int rc = -EIO;
389 struct net_device *ndev = priv->ndev;
390
391 ENTER;
392 bdx_link_changed(priv);
393
394 /* 10G overall max length (vlan, eth&ip header, ip payload, crc) */
395 WRITE_REG(priv, regFRM_LENGTH, 0X3FE0);
396 WRITE_REG(priv, regPAUSE_QUANT, 0x96);
397 WRITE_REG(priv, regRX_FIFO_SECTION, 0x800010);
398 WRITE_REG(priv, regTX_FIFO_SECTION, 0xE00010);
399 WRITE_REG(priv, regRX_FULLNESS, 0);
400 WRITE_REG(priv, regTX_FULLNESS, 0);
401 WRITE_REG(priv, regCTRLST,
402 regCTRLST_BASE | regCTRLST_RX_ENA | regCTRLST_TX_ENA);
403
404 WRITE_REG(priv, regVGLB, 0);
405 WRITE_REG(priv, regMAX_FRAME_A,
406 priv->rxf_fifo0.m.pktsz & MAX_FRAME_AB_VAL);
407
408 DBG("RDINTCM=%08x\n", priv->rdintcm); /*NOTE: test script uses this */
409 WRITE_REG(priv, regRDINTCM0, priv->rdintcm);
410 WRITE_REG(priv, regRDINTCM2, 0); /*cpu_to_le32(rcm.val)); */
411
412 DBG("TDINTCM=%08x\n", priv->tdintcm); /*NOTE: test script uses this */
413 WRITE_REG(priv, regTDINTCM0, priv->tdintcm); /* old val = 0x300064 */
414
415 /* Enable timer interrupt once in 2 secs. */
416 /*WRITE_REG(priv, regGTMR0, ((GTMR_SEC * 2) & GTMR_DATA)); */
417 bdx_restore_mac(priv->ndev, priv);
418
419 WRITE_REG(priv, regGMAC_RXF_A, GMAC_RX_FILTER_OSEN |
420 GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB);
421
422#define BDX_IRQ_TYPE ((priv->nic->irq_type == IRQ_MSI) ? 0 : IRQF_SHARED)
423
424 rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE,
425 ndev->name, ndev);
426 if (rc)
427 goto err_irq;
428 bdx_enable_interrupts(priv);
429
430 RET(0);
431
432err_irq:
433 RET(rc);
434}
435
436static void bdx_hw_stop(struct bdx_priv *priv)
437{
438 ENTER;
439 bdx_disable_interrupts(priv);
440 free_irq(priv->pdev->irq, priv->ndev);
441
442 netif_carrier_off(priv->ndev);
443 netif_stop_queue(priv->ndev);
444
445 RET();
446}
447
448static int bdx_hw_reset_direct(void __iomem *regs)
449{
450 u32 val, i;
451 ENTER;
452
453 /* reset sequences: read, write 1, read, write 0 */
454 val = readl(regs + regCLKPLL);
455 writel((val | CLKPLL_SFTRST) + 0x8, regs + regCLKPLL);
456 udelay(50);
457 val = readl(regs + regCLKPLL);
458 writel(val & ~CLKPLL_SFTRST, regs + regCLKPLL);
459
460 /* check that the PLLs are locked and reset ended */
461 for (i = 0; i < 70; i++, mdelay(10))
462 if ((readl(regs + regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) {
463 /* do any PCI-E read transaction */
464 readl(regs + regRXD_CFG0_0);
465 return 0;
466 }
467 pr_err("HW reset failed\n");
468 return 1; /* failure */
469}
470
471static int bdx_hw_reset(struct bdx_priv *priv)
472{
473 u32 val, i;
474 ENTER;
475
476 if (priv->port == 0) {
477 /* reset sequences: read, write 1, read, write 0 */
478 val = READ_REG(priv, regCLKPLL);
479 WRITE_REG(priv, regCLKPLL, (val | CLKPLL_SFTRST) + 0x8);
480 udelay(50);
481 val = READ_REG(priv, regCLKPLL);
482 WRITE_REG(priv, regCLKPLL, val & ~CLKPLL_SFTRST);
483 }
484 /* check that the PLLs are locked and reset ended */
485 for (i = 0; i < 70; i++, mdelay(10))
486 if ((READ_REG(priv, regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) {
487 /* do any PCI-E read transaction */
488 READ_REG(priv, regRXD_CFG0_0);
489 return 0;
490 }
491 pr_err("HW reset failed\n");
492 return 1; /* failure */
493}
494
495static int bdx_sw_reset(struct bdx_priv *priv)
496{
497 int i;
498
499 ENTER;
500 /* 1. load MAC (obsolete) */
501 /* 2. disable Rx (and Tx) */
502 WRITE_REG(priv, regGMAC_RXF_A, 0);
503 mdelay(100);
504 /* 3. disable port */
505 WRITE_REG(priv, regDIS_PORT, 1);
506 /* 4. disable queue */
507 WRITE_REG(priv, regDIS_QU, 1);
508 /* 5. wait until hw is disabled */
509 for (i = 0; i < 50; i++) {
510 if (READ_REG(priv, regRST_PORT) & 1)
511 break;
512 mdelay(10);
513 }
514 if (i == 50)
515 netdev_err(priv->ndev, "SW reset timeout. continuing anyway\n");
516
517 /* 6. disable intrs */
518 WRITE_REG(priv, regRDINTCM0, 0);
519 WRITE_REG(priv, regTDINTCM0, 0);
520 WRITE_REG(priv, regIMR, 0);
521 READ_REG(priv, regISR);
522
523 /* 7. reset queue */
524 WRITE_REG(priv, regRST_QU, 1);
525 /* 8. reset port */
526 WRITE_REG(priv, regRST_PORT, 1);
527 /* 9. zero all read and write pointers */
528 for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
529 DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR);
530 for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
531 WRITE_REG(priv, i, 0);
532 /* 10. unseet port disable */
533 WRITE_REG(priv, regDIS_PORT, 0);
534 /* 11. unset queue disable */
535 WRITE_REG(priv, regDIS_QU, 0);
536 /* 12. unset queue reset */
537 WRITE_REG(priv, regRST_QU, 0);
538 /* 13. unset port reset */
539 WRITE_REG(priv, regRST_PORT, 0);
540 /* 14. enable Rx */
541 /* skiped. will be done later */
542 /* 15. save MAC (obsolete) */
543 for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10)
544 DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR);
545
546 RET(0);
547}
548
549/* bdx_reset - performs right type of reset depending on hw type */
550static int bdx_reset(struct bdx_priv *priv)
551{
552 ENTER;
553 RET((priv->pdev->device == 0x3009)
554 ? bdx_hw_reset(priv)
555 : bdx_sw_reset(priv));
556}
557
558/**
559 * bdx_close - Disables a network interface
560 * @netdev: network interface device structure
561 *
562 * Returns 0, this is not allowed to fail
563 *
564 * The close entry point is called when an interface is de-activated
565 * by the OS. The hardware is still under the drivers control, but
566 * needs to be disabled. A global MAC reset is issued to stop the
567 * hardware, and all transmit and receive resources are freed.
568 **/
569static int bdx_close(struct net_device *ndev)
570{
571 struct bdx_priv *priv = NULL;
572
573 ENTER;
574 priv = netdev_priv(ndev);
575
576 napi_disable(&priv->napi);
577
578 bdx_reset(priv);
579 bdx_hw_stop(priv);
580 bdx_rx_free(priv);
581 bdx_tx_free(priv);
582 RET(0);
583}
584
585/**
586 * bdx_open - Called when a network interface is made active
587 * @netdev: network interface device structure
588 *
589 * Returns 0 on success, negative value on failure
590 *
591 * The open entry point is called when a network interface is made
592 * active by the system (IFF_UP). At this point all resources needed
593 * for transmit and receive operations are allocated, the interrupt
594 * handler is registered with the OS, the watchdog timer is started,
595 * and the stack is notified that the interface is ready.
596 **/
597static int bdx_open(struct net_device *ndev)
598{
599 struct bdx_priv *priv;
600 int rc;
601
602 ENTER;
603 priv = netdev_priv(ndev);
604 bdx_reset(priv);
605 if (netif_running(ndev))
606 netif_stop_queue(priv->ndev);
607
608 if ((rc = bdx_tx_init(priv)) ||
609 (rc = bdx_rx_init(priv)) ||
610 (rc = bdx_fw_load(priv)))
611 goto err;
612
613 bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
614
615 rc = bdx_hw_start(priv);
616 if (rc)
617 goto err;
618
619 napi_enable(&priv->napi);
620
621 print_fw_id(priv->nic);
622
623 RET(0);
624
625err:
626 bdx_close(ndev);
627 RET(rc);
628}
629
630static int bdx_range_check(struct bdx_priv *priv, u32 offset)
631{
632 return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ?
633 -EINVAL : 0;
634}
635
636static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
637{
638 struct bdx_priv *priv = netdev_priv(ndev);
639 u32 data[3];
640 int error;
641
642 ENTER;
643
644 DBG("jiffies=%ld cmd=%d\n", jiffies, cmd);
645 if (cmd != SIOCDEVPRIVATE) {
646 error = copy_from_user(data, ifr->ifr_data, sizeof(data));
647 if (error) {
648 pr_err("can't copy from user\n");
649 RET(-EFAULT);
650 }
651 DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
652 }
653
654 if (!capable(CAP_SYS_RAWIO))
655 return -EPERM;
656
657 switch (data[0]) {
658
659 case BDX_OP_READ:
660 error = bdx_range_check(priv, data[1]);
661 if (error < 0)
662 return error;
663 data[2] = READ_REG(priv, data[1]);
664 DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2],
665 data[2]);
666 error = copy_to_user(ifr->ifr_data, data, sizeof(data));
667 if (error)
668 RET(-EFAULT);
669 break;
670
671 case BDX_OP_WRITE:
672 error = bdx_range_check(priv, data[1]);
673 if (error < 0)
674 return error;
675 WRITE_REG(priv, data[1], data[2]);
676 DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]);
677 break;
678
679 default:
680 RET(-EOPNOTSUPP);
681 }
682 return 0;
683}
684
685static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
686{
687 ENTER;
688 if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15))
689 RET(bdx_ioctl_priv(ndev, ifr, cmd));
690 else
691 RET(-EOPNOTSUPP);
692}
693
694/*
695 * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid
696 * by passing VLAN filter table to hardware
697 * @ndev network device
698 * @vid VLAN vid
699 * @op add or kill operation
700 */
701static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable)
702{
703 struct bdx_priv *priv = netdev_priv(ndev);
704 u32 reg, bit, val;
705
706 ENTER;
707 DBG2("vid=%d value=%d\n", (int)vid, enable);
708 if (unlikely(vid >= 4096)) {
709 pr_err("invalid VID: %u (> 4096)\n", vid);
710 RET();
711 }
712 reg = regVLAN_0 + (vid / 32) * 4;
713 bit = 1 << vid % 32;
714 val = READ_REG(priv, reg);
715 DBG2("reg=%x, val=%x, bit=%d\n", reg, val, bit);
716 if (enable)
717 val |= bit;
718 else
719 val &= ~bit;
720 DBG2("new val %x\n", val);
721 WRITE_REG(priv, reg, val);
722 RET();
723}
724
725/*
726 * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table
727 * @ndev network device
728 * @vid VLAN vid to add
729 */
730static void bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid)
731{
732 __bdx_vlan_rx_vid(ndev, vid, 1);
733}
734
735/*
736 * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table
737 * @ndev network device
738 * @vid VLAN vid to kill
739 */
740static void bdx_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid)
741{
742 __bdx_vlan_rx_vid(ndev, vid, 0);
743}
744
745/**
746 * bdx_change_mtu - Change the Maximum Transfer Unit
747 * @netdev: network interface device structure
748 * @new_mtu: new value for maximum frame size
749 *
750 * Returns 0 on success, negative on failure
751 */
752static int bdx_change_mtu(struct net_device *ndev, int new_mtu)
753{
754 ENTER;
755
756 if (new_mtu == ndev->mtu)
757 RET(0);
758
759 /* enforce minimum frame size */
760 if (new_mtu < ETH_ZLEN) {
761 netdev_err(ndev, "mtu %d is less then minimal %d\n",
762 new_mtu, ETH_ZLEN);
763 RET(-EINVAL);
764 }
765
766 ndev->mtu = new_mtu;
767 if (netif_running(ndev)) {
768 bdx_close(ndev);
769 bdx_open(ndev);
770 }
771 RET(0);
772}
773
774static void bdx_setmulti(struct net_device *ndev)
775{
776 struct bdx_priv *priv = netdev_priv(ndev);
777
778 u32 rxf_val =
779 GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB | GMAC_RX_FILTER_OSEN;
780 int i;
781
782 ENTER;
783 /* IMF - imperfect (hash) rx multicat filter */
784 /* PMF - perfect rx multicat filter */
785
786 /* FIXME: RXE(OFF) */
787 if (ndev->flags & IFF_PROMISC) {
788 rxf_val |= GMAC_RX_FILTER_PRM;
789 } else if (ndev->flags & IFF_ALLMULTI) {
790 /* set IMF to accept all multicast frmaes */
791 for (i = 0; i < MAC_MCST_HASH_NUM; i++)
792 WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, ~0);
793 } else if (!netdev_mc_empty(ndev)) {
794 u8 hash;
795 struct netdev_hw_addr *ha;
796 u32 reg, val;
797
798 /* set IMF to deny all multicast frames */
799 for (i = 0; i < MAC_MCST_HASH_NUM; i++)
800 WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, 0);
801 /* set PMF to deny all multicast frames */
802 for (i = 0; i < MAC_MCST_NUM; i++) {
803 WRITE_REG(priv, regRX_MAC_MCST0 + i * 8, 0);
804 WRITE_REG(priv, regRX_MAC_MCST1 + i * 8, 0);
805 }
806
807 /* use PMF to accept first MAC_MCST_NUM (15) addresses */
808 /* TBD: sort addresses and write them in ascending order
809 * into RX_MAC_MCST regs. we skip this phase now and accept ALL
810 * multicast frames throu IMF */
811 /* accept the rest of addresses throu IMF */
812 netdev_for_each_mc_addr(ha, ndev) {
813 hash = 0;
814 for (i = 0; i < ETH_ALEN; i++)
815 hash ^= ha->addr[i];
816 reg = regRX_MCST_HASH0 + ((hash >> 5) << 2);
817 val = READ_REG(priv, reg);
818 val |= (1 << (hash % 32));
819 WRITE_REG(priv, reg, val);
820 }
821
822 } else {
823 DBG("only own mac %d\n", netdev_mc_count(ndev));
824 rxf_val |= GMAC_RX_FILTER_AB;
825 }
826 WRITE_REG(priv, regGMAC_RXF_A, rxf_val);
827 /* enable RX */
828 /* FIXME: RXE(ON) */
829 RET();
830}
831
832static int bdx_set_mac(struct net_device *ndev, void *p)
833{
834 struct bdx_priv *priv = netdev_priv(ndev);
835 struct sockaddr *addr = p;
836
837 ENTER;
838 /*
839 if (netif_running(dev))
840 return -EBUSY
841 */
842 memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
843 bdx_restore_mac(ndev, priv);
844 RET(0);
845}
846
847static int bdx_read_mac(struct bdx_priv *priv)
848{
849 u16 macAddress[3], i;
850 ENTER;
851
852 macAddress[2] = READ_REG(priv, regUNC_MAC0_A);
853 macAddress[2] = READ_REG(priv, regUNC_MAC0_A);
854 macAddress[1] = READ_REG(priv, regUNC_MAC1_A);
855 macAddress[1] = READ_REG(priv, regUNC_MAC1_A);
856 macAddress[0] = READ_REG(priv, regUNC_MAC2_A);
857 macAddress[0] = READ_REG(priv, regUNC_MAC2_A);
858 for (i = 0; i < 3; i++) {
859 priv->ndev->dev_addr[i * 2 + 1] = macAddress[i];
860 priv->ndev->dev_addr[i * 2] = macAddress[i] >> 8;
861 }
862 RET(0);
863}
864
865static u64 bdx_read_l2stat(struct bdx_priv *priv, int reg)
866{
867 u64 val;
868
869 val = READ_REG(priv, reg);
870 val |= ((u64) READ_REG(priv, reg + 8)) << 32;
871 return val;
872}
873
874/*Do the statistics-update work*/
875static void bdx_update_stats(struct bdx_priv *priv)
876{
877 struct bdx_stats *stats = &priv->hw_stats;
878 u64 *stats_vector = (u64 *) stats;
879 int i;
880 int addr;
881
882 /*Fill HW structure */
883 addr = 0x7200;
884 /*First 12 statistics - 0x7200 - 0x72B0 */
885 for (i = 0; i < 12; i++) {
886 stats_vector[i] = bdx_read_l2stat(priv, addr);
887 addr += 0x10;
888 }
889 BDX_ASSERT(addr != 0x72C0);
890 /* 0x72C0-0x72E0 RSRV */
891 addr = 0x72F0;
892 for (; i < 16; i++) {
893 stats_vector[i] = bdx_read_l2stat(priv, addr);
894 addr += 0x10;
895 }
896 BDX_ASSERT(addr != 0x7330);
897 /* 0x7330-0x7360 RSRV */
898 addr = 0x7370;
899 for (; i < 19; i++) {
900 stats_vector[i] = bdx_read_l2stat(priv, addr);
901 addr += 0x10;
902 }
903 BDX_ASSERT(addr != 0x73A0);
904 /* 0x73A0-0x73B0 RSRV */
905 addr = 0x73C0;
906 for (; i < 23; i++) {
907 stats_vector[i] = bdx_read_l2stat(priv, addr);
908 addr += 0x10;
909 }
910 BDX_ASSERT(addr != 0x7400);
911 BDX_ASSERT((sizeof(struct bdx_stats) / sizeof(u64)) != i);
912}
913
914static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
915 u16 rxd_vlan);
916static void print_rxfd(struct rxf_desc *rxfd);
917
918/*************************************************************************
919 * Rx DB *
920 *************************************************************************/
921
922static void bdx_rxdb_destroy(struct rxdb *db)
923{
924 vfree(db);
925}
926
927static struct rxdb *bdx_rxdb_create(int nelem)
928{
929 struct rxdb *db;
930 int i;
931
932 db = vmalloc(sizeof(struct rxdb)
933 + (nelem * sizeof(int))
934 + (nelem * sizeof(struct rx_map)));
935 if (likely(db != NULL)) {
936 db->stack = (int *)(db + 1);
937 db->elems = (void *)(db->stack + nelem);
938 db->nelem = nelem;
939 db->top = nelem;
940 for (i = 0; i < nelem; i++)
941 db->stack[i] = nelem - i - 1; /* to make first allocs
942 close to db struct*/
943 }
944
945 return db;
946}
947
948static inline int bdx_rxdb_alloc_elem(struct rxdb *db)
949{
950 BDX_ASSERT(db->top <= 0);
951 return db->stack[--(db->top)];
952}
953
954static inline void *bdx_rxdb_addr_elem(struct rxdb *db, int n)
955{
956 BDX_ASSERT((n < 0) || (n >= db->nelem));
957 return db->elems + n;
958}
959
960static inline int bdx_rxdb_available(struct rxdb *db)
961{
962 return db->top;
963}
964
965static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
966{
967 BDX_ASSERT((n >= db->nelem) || (n < 0));
968 db->stack[(db->top)++] = n;
969}
970
971/*************************************************************************
972 * Rx Init *
973 *************************************************************************/
974
975/* bdx_rx_init - initialize RX all related HW and SW resources
976 * @priv - NIC private structure
977 *
978 * Returns 0 on success, negative value on failure
979 *
980 * It creates rxf and rxd fifos, update relevant HW registers, preallocate
981 * skb for rx. It assumes that Rx is desabled in HW
982 * funcs are grouped for better cache usage
983 *
984 * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
985 * filled and packets will be dropped by nic without getting into host or
986 * cousing interrupt. Anyway, in that condition, host has no chance to process
987 * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
988 */
989
990/* TBD: ensure proper packet size */
991
992static int bdx_rx_init(struct bdx_priv *priv)
993{
994 ENTER;
995
996 if (bdx_fifo_init(priv, &priv->rxd_fifo0.m, priv->rxd_size,
997 regRXD_CFG0_0, regRXD_CFG1_0,
998 regRXD_RPTR_0, regRXD_WPTR_0))
999 goto err_mem;
1000 if (bdx_fifo_init(priv, &priv->rxf_fifo0.m, priv->rxf_size,
1001 regRXF_CFG0_0, regRXF_CFG1_0,
1002 regRXF_RPTR_0, regRXF_WPTR_0))
1003 goto err_mem;
1004 priv->rxdb = bdx_rxdb_create(priv->rxf_fifo0.m.memsz /
1005 sizeof(struct rxf_desc));
1006 if (!priv->rxdb)
1007 goto err_mem;
1008
1009 priv->rxf_fifo0.m.pktsz = priv->ndev->mtu + VLAN_ETH_HLEN;
1010 return 0;
1011
1012err_mem:
1013 netdev_err(priv->ndev, "Rx init failed\n");
1014 return -ENOMEM;
1015}
1016
1017/* bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo
1018 * @priv - NIC private structure
1019 * @f - RXF fifo
1020 */
1021static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
1022{
1023 struct rx_map *dm;
1024 struct rxdb *db = priv->rxdb;
1025 u16 i;
1026
1027 ENTER;
1028 DBG("total=%d free=%d busy=%d\n", db->nelem, bdx_rxdb_available(db),
1029 db->nelem - bdx_rxdb_available(db));
1030 while (bdx_rxdb_available(db) > 0) {
1031 i = bdx_rxdb_alloc_elem(db);
1032 dm = bdx_rxdb_addr_elem(db, i);
1033 dm->dma = 0;
1034 }
1035 for (i = 0; i < db->nelem; i++) {
1036 dm = bdx_rxdb_addr_elem(db, i);
1037 if (dm->dma) {
1038 pci_unmap_single(priv->pdev,
1039 dm->dma, f->m.pktsz,
1040 PCI_DMA_FROMDEVICE);
1041 dev_kfree_skb(dm->skb);
1042 }
1043 }
1044}
1045
1046/* bdx_rx_free - release all Rx resources
1047 * @priv - NIC private structure
1048 * It assumes that Rx is desabled in HW
1049 */
1050static void bdx_rx_free(struct bdx_priv *priv)
1051{
1052 ENTER;
1053 if (priv->rxdb) {
1054 bdx_rx_free_skbs(priv, &priv->rxf_fifo0);
1055 bdx_rxdb_destroy(priv->rxdb);
1056 priv->rxdb = NULL;
1057 }
1058 bdx_fifo_free(priv, &priv->rxf_fifo0.m);
1059 bdx_fifo_free(priv, &priv->rxd_fifo0.m);
1060
1061 RET();
1062}
1063
1064/*************************************************************************
1065 * Rx Engine *
1066 *************************************************************************/
1067
1068/* bdx_rx_alloc_skbs - fill rxf fifo with new skbs
1069 * @priv - nic's private structure
1070 * @f - RXF fifo that needs skbs
1071 * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo.
1072 * skb's virtual and physical addresses are stored in skb db.
1073 * To calculate free space, func uses cached values of RPTR and WPTR
1074 * When needed, it also updates RPTR and WPTR.
1075 */
1076
1077/* TBD: do not update WPTR if no desc were written */
1078
1079static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f)
1080{
1081 struct sk_buff *skb;
1082 struct rxf_desc *rxfd;
1083 struct rx_map *dm;
1084 int dno, delta, idx;
1085 struct rxdb *db = priv->rxdb;
1086
1087 ENTER;
1088 dno = bdx_rxdb_available(db) - 1;
1089 while (dno > 0) {
1090 skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN);
1091 if (!skb) {
1092 pr_err("NO MEM: dev_alloc_skb failed\n");
1093 break;
1094 }
1095 skb->dev = priv->ndev;
1096 skb_reserve(skb, NET_IP_ALIGN);
1097
1098 idx = bdx_rxdb_alloc_elem(db);
1099 dm = bdx_rxdb_addr_elem(db, idx);
1100 dm->dma = pci_map_single(priv->pdev,
1101 skb->data, f->m.pktsz,
1102 PCI_DMA_FROMDEVICE);
1103 dm->skb = skb;
1104 rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr);
1105 rxfd->info = CPU_CHIP_SWAP32(0x10003); /* INFO=1 BC=3 */
1106 rxfd->va_lo = idx;
1107 rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma));
1108 rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma));
1109 rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz);
1110 print_rxfd(rxfd);
1111
1112 f->m.wptr += sizeof(struct rxf_desc);
1113 delta = f->m.wptr - f->m.memsz;
1114 if (unlikely(delta >= 0)) {
1115 f->m.wptr = delta;
1116 if (delta > 0) {
1117 memcpy(f->m.va, f->m.va + f->m.memsz, delta);
1118 DBG("wrapped descriptor\n");
1119 }
1120 }
1121 dno--;
1122 }
1123 /*TBD: to do - delayed rxf wptr like in txd */
1124 WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1125 RET();
1126}
1127
1128static inline void
1129NETIF_RX_MUX(struct bdx_priv *priv, u32 rxd_val1, u16 rxd_vlan,
1130 struct sk_buff *skb)
1131{
1132 ENTER;
1133 DBG("rxdd->flags.bits.vtag=%d\n", GET_RXD_VTAG(rxd_val1));
1134 if (GET_RXD_VTAG(rxd_val1)) {
1135 DBG("%s: vlan rcv vlan '%x' vtag '%x'\n",
1136 priv->ndev->name,
1137 GET_RXD_VLAN_ID(rxd_vlan),
1138 GET_RXD_VTAG(rxd_val1));
1139 __vlan_hwaccel_put_tag(skb, GET_RXD_VLAN_TCI(rxd_vlan));
1140 }
1141 netif_receive_skb(skb);
1142}
1143
1144static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
1145{
1146 struct rxf_desc *rxfd;
1147 struct rx_map *dm;
1148 struct rxf_fifo *f;
1149 struct rxdb *db;
1150 struct sk_buff *skb;
1151 int delta;
1152
1153 ENTER;
1154 DBG("priv=%p rxdd=%p\n", priv, rxdd);
1155 f = &priv->rxf_fifo0;
1156 db = priv->rxdb;
1157 DBG("db=%p f=%p\n", db, f);
1158 dm = bdx_rxdb_addr_elem(db, rxdd->va_lo);
1159 DBG("dm=%p\n", dm);
1160 skb = dm->skb;
1161 rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr);
1162 rxfd->info = CPU_CHIP_SWAP32(0x10003); /* INFO=1 BC=3 */
1163 rxfd->va_lo = rxdd->va_lo;
1164 rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma));
1165 rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma));
1166 rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz);
1167 print_rxfd(rxfd);
1168
1169 f->m.wptr += sizeof(struct rxf_desc);
1170 delta = f->m.wptr - f->m.memsz;
1171 if (unlikely(delta >= 0)) {
1172 f->m.wptr = delta;
1173 if (delta > 0) {
1174 memcpy(f->m.va, f->m.va + f->m.memsz, delta);
1175 DBG("wrapped descriptor\n");
1176 }
1177 }
1178 RET();
1179}
1180
1181/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS
1182 * NOTE: a special treatment is given to non-continuous descriptors
1183 * that start near the end, wraps around and continue at the beginning. a second
1184 * part is copied right after the first, and then descriptor is interpreted as
1185 * normal. fifo has an extra space to allow such operations
1186 * @priv - nic's private structure
1187 * @f - RXF fifo that needs skbs
1188 */
1189
1190/* TBD: replace memcpy func call by explicite inline asm */
1191
1192static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget)
1193{
1194 struct net_device *ndev = priv->ndev;
1195 struct sk_buff *skb, *skb2;
1196 struct rxd_desc *rxdd;
1197 struct rx_map *dm;
1198 struct rxf_fifo *rxf_fifo;
1199 int tmp_len, size;
1200 int done = 0;
1201 int max_done = BDX_MAX_RX_DONE;
1202 struct rxdb *db = NULL;
1203 /* Unmarshalled descriptor - copy of descriptor in host order */
1204 u32 rxd_val1;
1205 u16 len;
1206 u16 rxd_vlan;
1207
1208 ENTER;
1209 max_done = budget;
1210
1211 f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_WR_PTR;
1212
1213 size = f->m.wptr - f->m.rptr;
1214 if (size < 0)
1215 size = f->m.memsz + size; /* size is negative :-) */
1216
1217 while (size > 0) {
1218
1219 rxdd = (struct rxd_desc *)(f->m.va + f->m.rptr);
1220 rxd_val1 = CPU_CHIP_SWAP32(rxdd->rxd_val1);
1221
1222 len = CPU_CHIP_SWAP16(rxdd->len);
1223
1224 rxd_vlan = CPU_CHIP_SWAP16(rxdd->rxd_vlan);
1225
1226 print_rxdd(rxdd, rxd_val1, len, rxd_vlan);
1227
1228 tmp_len = GET_RXD_BC(rxd_val1) << 3;
1229 BDX_ASSERT(tmp_len <= 0);
1230 size -= tmp_len;
1231 if (size < 0) /* test for partially arrived descriptor */
1232 break;
1233
1234 f->m.rptr += tmp_len;
1235
1236 tmp_len = f->m.rptr - f->m.memsz;
1237 if (unlikely(tmp_len >= 0)) {
1238 f->m.rptr = tmp_len;
1239 if (tmp_len > 0) {
1240 DBG("wrapped desc rptr=%d tmp_len=%d\n",
1241 f->m.rptr, tmp_len);
1242 memcpy(f->m.va + f->m.memsz, f->m.va, tmp_len);
1243 }
1244 }
1245
1246 if (unlikely(GET_RXD_ERR(rxd_val1))) {
1247 DBG("rxd_err = 0x%x\n", GET_RXD_ERR(rxd_val1));
1248 ndev->stats.rx_errors++;
1249 bdx_recycle_skb(priv, rxdd);
1250 continue;
1251 }
1252
1253 rxf_fifo = &priv->rxf_fifo0;
1254 db = priv->rxdb;
1255 dm = bdx_rxdb_addr_elem(db, rxdd->va_lo);
1256 skb = dm->skb;
1257
1258 if (len < BDX_COPYBREAK &&
1259 (skb2 = dev_alloc_skb(len + NET_IP_ALIGN))) {
1260 skb_reserve(skb2, NET_IP_ALIGN);
1261 /*skb_put(skb2, len); */
1262 pci_dma_sync_single_for_cpu(priv->pdev,
1263 dm->dma, rxf_fifo->m.pktsz,
1264 PCI_DMA_FROMDEVICE);
1265 memcpy(skb2->data, skb->data, len);
1266 bdx_recycle_skb(priv, rxdd);
1267 skb = skb2;
1268 } else {
1269 pci_unmap_single(priv->pdev,
1270 dm->dma, rxf_fifo->m.pktsz,
1271 PCI_DMA_FROMDEVICE);
1272 bdx_rxdb_free_elem(db, rxdd->va_lo);
1273 }
1274
1275 ndev->stats.rx_bytes += len;
1276
1277 skb_put(skb, len);
1278 skb->protocol = eth_type_trans(skb, ndev);
1279
1280 /* Non-IP packets aren't checksum-offloaded */
1281 if (GET_RXD_PKT_ID(rxd_val1) == 0)
1282 skb_checksum_none_assert(skb);
1283 else
1284 skb->ip_summed = CHECKSUM_UNNECESSARY;
1285
1286 NETIF_RX_MUX(priv, rxd_val1, rxd_vlan, skb);
1287
1288 if (++done >= max_done)
1289 break;
1290 }
1291
1292 ndev->stats.rx_packets += done;
1293
1294 /* FIXME: do smth to minimize pci accesses */
1295 WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR);
1296
1297 bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0);
1298
1299 RET(done);
1300}
1301
1302/*************************************************************************
1303 * Debug / Temprorary Code *
1304 *************************************************************************/
1305static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len,
1306 u16 rxd_vlan)
1307{
1308 DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d va_lo %d va_hi %d\n",
1309 GET_RXD_BC(rxd_val1), GET_RXD_RXFQ(rxd_val1), GET_RXD_TO(rxd_val1),
1310 GET_RXD_TYPE(rxd_val1), GET_RXD_ERR(rxd_val1),
1311 GET_RXD_RXP(rxd_val1), GET_RXD_PKT_ID(rxd_val1),
1312 GET_RXD_VTAG(rxd_val1), len, GET_RXD_VLAN_ID(rxd_vlan),
1313 GET_RXD_CFI(rxd_vlan), GET_RXD_PRIO(rxd_vlan), rxdd->va_lo,
1314 rxdd->va_hi);
1315}
1316
1317static void print_rxfd(struct rxf_desc *rxfd)
1318{
1319 DBG("=== RxF desc CHIP ORDER/ENDIANESS =============\n"
1320 "info 0x%x va_lo %u pa_lo 0x%x pa_hi 0x%x len 0x%x\n",
1321 rxfd->info, rxfd->va_lo, rxfd->pa_lo, rxfd->pa_hi, rxfd->len);
1322}
1323
1324/*
1325 * TX HW/SW interaction overview
1326 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1327 * There are 2 types of TX communication channels between driver and NIC.
1328 * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
1329 * 2) TX Data Fifo - TXD - holds descriptors of full buffers.
1330 *
1331 * Currently NIC supports TSO, checksuming and gather DMA
1332 * UFO and IP fragmentation is on the way
1333 *
1334 * RX SW Data Structures
1335 * ~~~~~~~~~~~~~~~~~~~~~
1336 * txdb - used to keep track of all skbs owned by SW and their dma addresses.
1337 * For TX case, ownership lasts from geting packet via hard_xmit and until HW
1338 * acknowledges sent by TXF descriptors.
1339 * Implemented as cyclic buffer.
1340 * fifo - keeps info about fifo's size and location, relevant HW registers,
1341 * usage and skb db. Each RXD and RXF Fifo has its own fifo structure.
1342 * Implemented as simple struct.
1343 *
1344 * TX SW Execution Flow
1345 * ~~~~~~~~~~~~~~~~~~~~
1346 * OS calls driver's hard_xmit method with packet to sent.
1347 * Driver creates DMA mappings, builds TXD descriptors and kicks HW
1348 * by updating TXD WPTR.
1349 * When packet is sent, HW write us TXF descriptor and SW frees original skb.
1350 * To prevent TXD fifo overflow without reading HW registers every time,
1351 * SW deploys "tx level" technique.
1352 * Upon strart up, tx level is initialized to TXD fifo length.
1353 * For every sent packet, SW gets its TXD descriptor sizei
1354 * (from precalculated array) and substructs it from tx level.
1355 * The size is also stored in txdb. When TXF ack arrives, SW fetch size of
1356 * original TXD descriptor from txdb and adds it to tx level.
1357 * When Tx level drops under some predefined treshhold, the driver
1358 * stops the TX queue. When TX level rises above that level,
1359 * the tx queue is enabled again.
1360 *
1361 * This technique avoids eccessive reading of RPTR and WPTR registers.
1362 * As our benchmarks shows, it adds 1.5 Gbit/sec to NIS's throuput.
1363 */
1364
1365/*************************************************************************
1366 * Tx DB *
1367 *************************************************************************/
1368static inline int bdx_tx_db_size(struct txdb *db)
1369{
1370 int taken = db->wptr - db->rptr;
1371 if (taken < 0)
1372 taken = db->size + 1 + taken; /* (size + 1) equals memsz */
1373
1374 return db->size - taken;
1375}
1376
1377/* __bdx_tx_ptr_next - helper function, increment read/write pointer + wrap
1378 * @d - tx data base
1379 * @ptr - read or write pointer
1380 */
1381static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr)
1382{
1383 BDX_ASSERT(db == NULL || pptr == NULL); /* sanity */
1384
1385 BDX_ASSERT(*pptr != db->rptr && /* expect either read */
1386 *pptr != db->wptr); /* or write pointer */
1387
1388 BDX_ASSERT(*pptr < db->start || /* pointer has to be */
1389 *pptr >= db->end); /* in range */
1390
1391 ++*pptr;
1392 if (unlikely(*pptr == db->end))
1393 *pptr = db->start;
1394}
1395
1396/* bdx_tx_db_inc_rptr - increment read pointer
1397 * @d - tx data base
1398 */
1399static inline void bdx_tx_db_inc_rptr(struct txdb *db)
1400{
1401 BDX_ASSERT(db->rptr == db->wptr); /* can't read from empty db */
1402 __bdx_tx_db_ptr_next(db, &db->rptr);
1403}
1404
1405/* bdx_tx_db_inc_rptr - increment write pointer
1406 * @d - tx data base
1407 */
1408static inline void bdx_tx_db_inc_wptr(struct txdb *db)
1409{
1410 __bdx_tx_db_ptr_next(db, &db->wptr);
1411 BDX_ASSERT(db->rptr == db->wptr); /* we can not get empty db as
1412 a result of write */
1413}
1414
1415/* bdx_tx_db_init - creates and initializes tx db
1416 * @d - tx data base
1417 * @sz_type - size of tx fifo
1418 * Returns 0 on success, error code otherwise
1419 */
1420static int bdx_tx_db_init(struct txdb *d, int sz_type)
1421{
1422 int memsz = FIFO_SIZE * (1 << (sz_type + 1));
1423
1424 d->start = vmalloc(memsz);
1425 if (!d->start)
1426 return -ENOMEM;
1427
1428 /*
1429 * In order to differentiate between db is empty and db is full
1430 * states at least one element should always be empty in order to
1431 * avoid rptr == wptr which means db is empty
1432 */
1433 d->size = memsz / sizeof(struct tx_map) - 1;
1434 d->end = d->start + d->size + 1; /* just after last element */
1435
1436 /* all dbs are created equally empty */
1437 d->rptr = d->start;
1438 d->wptr = d->start;
1439
1440 return 0;
1441}
1442
1443/* bdx_tx_db_close - closes tx db and frees all memory
1444 * @d - tx data base
1445 */
1446static void bdx_tx_db_close(struct txdb *d)
1447{
1448 BDX_ASSERT(d == NULL);
1449
1450 vfree(d->start);
1451 d->start = NULL;
1452}
1453
1454/*************************************************************************
1455 * Tx Engine *
1456 *************************************************************************/
1457
1458/* sizes of tx desc (including padding if needed) as function
1459 * of skb's frag number */
1460static struct {
1461 u16 bytes;
1462 u16 qwords; /* qword = 64 bit */
1463} txd_sizes[MAX_SKB_FRAGS + 1];
1464
1465/* txdb_map_skb - creates and stores dma mappings for skb's data blocks
1466 * @priv - NIC private structure
1467 * @skb - socket buffer to map
1468 *
1469 * It makes dma mappings for skb's data blocks and writes them to PBL of
1470 * new tx descriptor. It also stores them in the tx db, so they could be
1471 * unmaped after data was sent. It is reponsibility of a caller to make
1472 * sure that there is enough space in the tx db. Last element holds pointer
1473 * to skb itself and marked with zero length
1474 */
1475static inline void
1476bdx_tx_map_skb(struct bdx_priv *priv, struct sk_buff *skb,
1477 struct txd_desc *txdd)
1478{
1479 struct txdb *db = &priv->txdb;
1480 struct pbl *pbl = &txdd->pbl[0];
1481 int nr_frags = skb_shinfo(skb)->nr_frags;
1482 int i;
1483
1484 db->wptr->len = skb_headlen(skb);
1485 db->wptr->addr.dma = pci_map_single(priv->pdev, skb->data,
1486 db->wptr->len, PCI_DMA_TODEVICE);
1487 pbl->len = CPU_CHIP_SWAP32(db->wptr->len);
1488 pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma));
1489 pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma));
1490 DBG("=== pbl len: 0x%x ================\n", pbl->len);
1491 DBG("=== pbl pa_lo: 0x%x ================\n", pbl->pa_lo);
1492 DBG("=== pbl pa_hi: 0x%x ================\n", pbl->pa_hi);
1493 bdx_tx_db_inc_wptr(db);
1494
1495 for (i = 0; i < nr_frags; i++) {
1496 const struct skb_frag_struct *frag;
1497
1498 frag = &skb_shinfo(skb)->frags[i];
1499 db->wptr->len = skb_frag_size(frag);
1500 db->wptr->addr.dma = skb_frag_dma_map(&priv->pdev->dev, frag,
1501 0, skb_frag_size(frag),
1502 DMA_TO_DEVICE);
1503
1504 pbl++;
1505 pbl->len = CPU_CHIP_SWAP32(db->wptr->len);
1506 pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma));
1507 pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma));
1508 bdx_tx_db_inc_wptr(db);
1509 }
1510
1511 /* add skb clean up info. */
1512 db->wptr->len = -txd_sizes[nr_frags].bytes;
1513 db->wptr->addr.skb = skb;
1514 bdx_tx_db_inc_wptr(db);
1515}
1516
1517/* init_txd_sizes - precalculate sizes of descriptors for skbs up to 16 frags
1518 * number of frags is used as index to fetch correct descriptors size,
1519 * instead of calculating it each time */
1520static void __init init_txd_sizes(void)
1521{
1522 int i, lwords;
1523
1524 /* 7 - is number of lwords in txd with one phys buffer
1525 * 3 - is number of lwords used for every additional phys buffer */
1526 for (i = 0; i < MAX_SKB_FRAGS + 1; i++) {
1527 lwords = 7 + (i * 3);
1528 if (lwords & 1)
1529 lwords++; /* pad it with 1 lword */
1530 txd_sizes[i].qwords = lwords >> 1;
1531 txd_sizes[i].bytes = lwords << 2;
1532 }
1533}
1534
1535/* bdx_tx_init - initialize all Tx related stuff.
1536 * Namely, TXD and TXF fifos, database etc */
1537static int bdx_tx_init(struct bdx_priv *priv)
1538{
1539 if (bdx_fifo_init(priv, &priv->txd_fifo0.m, priv->txd_size,
1540 regTXD_CFG0_0,
1541 regTXD_CFG1_0, regTXD_RPTR_0, regTXD_WPTR_0))
1542 goto err_mem;
1543 if (bdx_fifo_init(priv, &priv->txf_fifo0.m, priv->txf_size,
1544 regTXF_CFG0_0,
1545 regTXF_CFG1_0, regTXF_RPTR_0, regTXF_WPTR_0))
1546 goto err_mem;
1547
1548 /* The TX db has to keep mappings for all packets sent (on TxD)
1549 * and not yet reclaimed (on TxF) */
1550 if (bdx_tx_db_init(&priv->txdb, max(priv->txd_size, priv->txf_size)))
1551 goto err_mem;
1552
1553 priv->tx_level = BDX_MAX_TX_LEVEL;
1554#ifdef BDX_DELAY_WPTR
1555 priv->tx_update_mark = priv->tx_level - 1024;
1556#endif
1557 return 0;
1558
1559err_mem:
1560 netdev_err(priv->ndev, "Tx init failed\n");
1561 return -ENOMEM;
1562}
1563
1564/*
1565 * bdx_tx_space - calculates available space in TX fifo
1566 * @priv - NIC private structure
1567 * Returns available space in TX fifo in bytes
1568 */
1569static inline int bdx_tx_space(struct bdx_priv *priv)
1570{
1571 struct txd_fifo *f = &priv->txd_fifo0;
1572 int fsize;
1573
1574 f->m.rptr = READ_REG(priv, f->m.reg_RPTR) & TXF_WPTR_WR_PTR;
1575 fsize = f->m.rptr - f->m.wptr;
1576 if (fsize <= 0)
1577 fsize = f->m.memsz + fsize;
1578 return fsize;
1579}
1580
1581/* bdx_tx_transmit - send packet to NIC
1582 * @skb - packet to send
1583 * ndev - network device assigned to NIC
1584 * Return codes:
1585 * o NETDEV_TX_OK everything ok.
1586 * o NETDEV_TX_BUSY Cannot transmit packet, try later
1587 * Usually a bug, means queue start/stop flow control is broken in
1588 * the driver. Note: the driver must NOT put the skb in its DMA ring.
1589 * o NETDEV_TX_LOCKED Locking failed, please retry quickly.
1590 */
1591static netdev_tx_t bdx_tx_transmit(struct sk_buff *skb,
1592 struct net_device *ndev)
1593{
1594 struct bdx_priv *priv = netdev_priv(ndev);
1595 struct txd_fifo *f = &priv->txd_fifo0;
1596 int txd_checksum = 7; /* full checksum */
1597 int txd_lgsnd = 0;
1598 int txd_vlan_id = 0;
1599 int txd_vtag = 0;
1600 int txd_mss = 0;
1601
1602 int nr_frags = skb_shinfo(skb)->nr_frags;
1603 struct txd_desc *txdd;
1604 int len;
1605 unsigned long flags;
1606
1607 ENTER;
1608 local_irq_save(flags);
1609 if (!spin_trylock(&priv->tx_lock)) {
1610 local_irq_restore(flags);
1611 DBG("%s[%s]: TX locked, returning NETDEV_TX_LOCKED\n",
1612 BDX_DRV_NAME, ndev->name);
1613 return NETDEV_TX_LOCKED;
1614 }
1615
1616 /* build tx descriptor */
1617 BDX_ASSERT(f->m.wptr >= f->m.memsz); /* started with valid wptr */
1618 txdd = (struct txd_desc *)(f->m.va + f->m.wptr);
1619 if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL))
1620 txd_checksum = 0;
1621
1622 if (skb_shinfo(skb)->gso_size) {
1623 txd_mss = skb_shinfo(skb)->gso_size;
1624 txd_lgsnd = 1;
1625 DBG("skb %p skb len %d gso size = %d\n", skb, skb->len,
1626 txd_mss);
1627 }
1628
1629 if (vlan_tx_tag_present(skb)) {
1630 /*Cut VLAN ID to 12 bits */
1631 txd_vlan_id = vlan_tx_tag_get(skb) & BITS_MASK(12);
1632 txd_vtag = 1;
1633 }
1634
1635 txdd->length = CPU_CHIP_SWAP16(skb->len);
1636 txdd->mss = CPU_CHIP_SWAP16(txd_mss);
1637 txdd->txd_val1 =
1638 CPU_CHIP_SWAP32(TXD_W1_VAL
1639 (txd_sizes[nr_frags].qwords, txd_checksum, txd_vtag,
1640 txd_lgsnd, txd_vlan_id));
1641 DBG("=== TxD desc =====================\n");
1642 DBG("=== w1: 0x%x ================\n", txdd->txd_val1);
1643 DBG("=== w2: mss 0x%x len 0x%x\n", txdd->mss, txdd->length);
1644
1645 bdx_tx_map_skb(priv, skb, txdd);
1646
1647 /* increment TXD write pointer. In case of
1648 fifo wrapping copy reminder of the descriptor
1649 to the beginning */
1650 f->m.wptr += txd_sizes[nr_frags].bytes;
1651 len = f->m.wptr - f->m.memsz;
1652 if (unlikely(len >= 0)) {
1653 f->m.wptr = len;
1654 if (len > 0) {
1655 BDX_ASSERT(len > f->m.memsz);
1656 memcpy(f->m.va, f->m.va + f->m.memsz, len);
1657 }
1658 }
1659 BDX_ASSERT(f->m.wptr >= f->m.memsz); /* finished with valid wptr */
1660
1661 priv->tx_level -= txd_sizes[nr_frags].bytes;
1662 BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL);
1663#ifdef BDX_DELAY_WPTR
1664 if (priv->tx_level > priv->tx_update_mark) {
1665 /* Force memory writes to complete before letting h/w
1666 know there are new descriptors to fetch.
1667 (might be needed on platforms like IA64)
1668 wmb(); */
1669 WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1670 } else {
1671 if (priv->tx_noupd++ > BDX_NO_UPD_PACKETS) {
1672 priv->tx_noupd = 0;
1673 WRITE_REG(priv, f->m.reg_WPTR,
1674 f->m.wptr & TXF_WPTR_WR_PTR);
1675 }
1676 }
1677#else
1678 /* Force memory writes to complete before letting h/w
1679 know there are new descriptors to fetch.
1680 (might be needed on platforms like IA64)
1681 wmb(); */
1682 WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1683
1684#endif
1685#ifdef BDX_LLTX
1686 ndev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
1687#endif
1688 ndev->stats.tx_packets++;
1689 ndev->stats.tx_bytes += skb->len;
1690
1691 if (priv->tx_level < BDX_MIN_TX_LEVEL) {
1692 DBG("%s: %s: TX Q STOP level %d\n",
1693 BDX_DRV_NAME, ndev->name, priv->tx_level);
1694 netif_stop_queue(ndev);
1695 }
1696
1697 spin_unlock_irqrestore(&priv->tx_lock, flags);
1698 return NETDEV_TX_OK;
1699}
1700
1701/* bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ.
1702 * @priv - bdx adapter
1703 * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS
1704 * that those packets were sent
1705 */
1706static void bdx_tx_cleanup(struct bdx_priv *priv)
1707{
1708 struct txf_fifo *f = &priv->txf_fifo0;
1709 struct txdb *db = &priv->txdb;
1710 int tx_level = 0;
1711
1712 ENTER;
1713 f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_MASK;
1714 BDX_ASSERT(f->m.rptr >= f->m.memsz); /* started with valid rptr */
1715
1716 while (f->m.wptr != f->m.rptr) {
1717 f->m.rptr += BDX_TXF_DESC_SZ;
1718 f->m.rptr &= f->m.size_mask;
1719
1720 /* unmap all the fragments */
1721 /* first has to come tx_maps containing dma */
1722 BDX_ASSERT(db->rptr->len == 0);
1723 do {
1724 BDX_ASSERT(db->rptr->addr.dma == 0);
1725 pci_unmap_page(priv->pdev, db->rptr->addr.dma,
1726 db->rptr->len, PCI_DMA_TODEVICE);
1727 bdx_tx_db_inc_rptr(db);
1728 } while (db->rptr->len > 0);
1729 tx_level -= db->rptr->len; /* '-' koz len is negative */
1730
1731 /* now should come skb pointer - free it */
1732 dev_kfree_skb_irq(db->rptr->addr.skb);
1733 bdx_tx_db_inc_rptr(db);
1734 }
1735
1736 /* let h/w know which TXF descriptors were cleaned */
1737 BDX_ASSERT((f->m.wptr & TXF_WPTR_WR_PTR) >= f->m.memsz);
1738 WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR);
1739
1740 /* We reclaimed resources, so in case the Q is stopped by xmit callback,
1741 * we resume the transmition and use tx_lock to synchronize with xmit.*/
1742 spin_lock(&priv->tx_lock);
1743 priv->tx_level += tx_level;
1744 BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL);
1745#ifdef BDX_DELAY_WPTR
1746 if (priv->tx_noupd) {
1747 priv->tx_noupd = 0;
1748 WRITE_REG(priv, priv->txd_fifo0.m.reg_WPTR,
1749 priv->txd_fifo0.m.wptr & TXF_WPTR_WR_PTR);
1750 }
1751#endif
1752
1753 if (unlikely(netif_queue_stopped(priv->ndev) &&
1754 netif_carrier_ok(priv->ndev) &&
1755 (priv->tx_level >= BDX_MIN_TX_LEVEL))) {
1756 DBG("%s: %s: TX Q WAKE level %d\n",
1757 BDX_DRV_NAME, priv->ndev->name, priv->tx_level);
1758 netif_wake_queue(priv->ndev);
1759 }
1760 spin_unlock(&priv->tx_lock);
1761}
1762
1763/* bdx_tx_free_skbs - frees all skbs from TXD fifo.
1764 * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod
1765 */
1766static void bdx_tx_free_skbs(struct bdx_priv *priv)
1767{
1768 struct txdb *db = &priv->txdb;
1769
1770 ENTER;
1771 while (db->rptr != db->wptr) {
1772 if (likely(db->rptr->len))
1773 pci_unmap_page(priv->pdev, db->rptr->addr.dma,
1774 db->rptr->len, PCI_DMA_TODEVICE);
1775 else
1776 dev_kfree_skb(db->rptr->addr.skb);
1777 bdx_tx_db_inc_rptr(db);
1778 }
1779 RET();
1780}
1781
1782/* bdx_tx_free - frees all Tx resources */
1783static void bdx_tx_free(struct bdx_priv *priv)
1784{
1785 ENTER;
1786 bdx_tx_free_skbs(priv);
1787 bdx_fifo_free(priv, &priv->txd_fifo0.m);
1788 bdx_fifo_free(priv, &priv->txf_fifo0.m);
1789 bdx_tx_db_close(&priv->txdb);
1790}
1791
1792/* bdx_tx_push_desc - push descriptor to TxD fifo
1793 * @priv - NIC private structure
1794 * @data - desc's data
1795 * @size - desc's size
1796 *
1797 * Pushes desc to TxD fifo and overlaps it if needed.
1798 * NOTE: this func does not check for available space. this is responsibility
1799 * of the caller. Neither does it check that data size is smaller than
1800 * fifo size.
1801 */
1802static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
1803{
1804 struct txd_fifo *f = &priv->txd_fifo0;
1805 int i = f->m.memsz - f->m.wptr;
1806
1807 if (size == 0)
1808 return;
1809
1810 if (i > size) {
1811 memcpy(f->m.va + f->m.wptr, data, size);
1812 f->m.wptr += size;
1813 } else {
1814 memcpy(f->m.va + f->m.wptr, data, i);
1815 f->m.wptr = size - i;
1816 memcpy(f->m.va, data + i, f->m.wptr);
1817 }
1818 WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR);
1819}
1820
1821/* bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way
1822 * @priv - NIC private structure
1823 * @data - desc's data
1824 * @size - desc's size
1825 *
1826 * NOTE: this func does check for available space and, if necessary, waits for
1827 * NIC to read existing data before writing new one.
1828 */
1829static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size)
1830{
1831 int timer = 0;
1832 ENTER;
1833
1834 while (size > 0) {
1835 /* we substruct 8 because when fifo is full rptr == wptr
1836 which also means that fifo is empty, we can understand
1837 the difference, but could hw do the same ??? :) */
1838 int avail = bdx_tx_space(priv) - 8;
1839 if (avail <= 0) {
1840 if (timer++ > 300) { /* prevent endless loop */
1841 DBG("timeout while writing desc to TxD fifo\n");
1842 break;
1843 }
1844 udelay(50); /* give hw a chance to clean fifo */
1845 continue;
1846 }
1847 avail = min(avail, size);
1848 DBG("about to push %d bytes starting %p size %d\n", avail,
1849 data, size);
1850 bdx_tx_push_desc(priv, data, avail);
1851 size -= avail;
1852 data += avail;
1853 }
1854 RET();
1855}
1856
1857static const struct net_device_ops bdx_netdev_ops = {
1858 .ndo_open = bdx_open,
1859 .ndo_stop = bdx_close,
1860 .ndo_start_xmit = bdx_tx_transmit,
1861 .ndo_validate_addr = eth_validate_addr,
1862 .ndo_do_ioctl = bdx_ioctl,
1863 .ndo_set_rx_mode = bdx_setmulti,
1864 .ndo_change_mtu = bdx_change_mtu,
1865 .ndo_set_mac_address = bdx_set_mac,
1866 .ndo_vlan_rx_add_vid = bdx_vlan_rx_add_vid,
1867 .ndo_vlan_rx_kill_vid = bdx_vlan_rx_kill_vid,
1868};
1869
1870/**
1871 * bdx_probe - Device Initialization Routine
1872 * @pdev: PCI device information struct
1873 * @ent: entry in bdx_pci_tbl
1874 *
1875 * Returns 0 on success, negative on failure
1876 *
1877 * bdx_probe initializes an adapter identified by a pci_dev structure.
1878 * The OS initialization, configuring of the adapter private structure,
1879 * and a hardware reset occur.
1880 *
1881 * functions and their order used as explained in
1882 * /usr/src/linux/Documentation/DMA-{API,mapping}.txt
1883 *
1884 */
1885
1886/* TBD: netif_msg should be checked and implemented. I disable it for now */
1887static int __devinit
1888bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1889{
1890 struct net_device *ndev;
1891 struct bdx_priv *priv;
1892 int err, pci_using_dac, port;
1893 unsigned long pciaddr;
1894 u32 regionSize;
1895 struct pci_nic *nic;
1896
1897 ENTER;
1898
1899 nic = vmalloc(sizeof(*nic));
1900 if (!nic)
1901 RET(-ENOMEM);
1902
1903 /************** pci *****************/
1904 err = pci_enable_device(pdev);
1905 if (err) /* it triggers interrupt, dunno why. */
1906 goto err_pci; /* it's not a problem though */
1907
1908 if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) &&
1909 !(err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))) {
1910 pci_using_dac = 1;
1911 } else {
1912 if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
1913 (err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
1914 pr_err("No usable DMA configuration, aborting\n");
1915 goto err_dma;
1916 }
1917 pci_using_dac = 0;
1918 }
1919
1920 err = pci_request_regions(pdev, BDX_DRV_NAME);
1921 if (err)
1922 goto err_dma;
1923
1924 pci_set_master(pdev);
1925
1926 pciaddr = pci_resource_start(pdev, 0);
1927 if (!pciaddr) {
1928 err = -EIO;
1929 pr_err("no MMIO resource\n");
1930 goto err_out_res;
1931 }
1932 regionSize = pci_resource_len(pdev, 0);
1933 if (regionSize < BDX_REGS_SIZE) {
1934 err = -EIO;
1935 pr_err("MMIO resource (%x) too small\n", regionSize);
1936 goto err_out_res;
1937 }
1938
1939 nic->regs = ioremap(pciaddr, regionSize);
1940 if (!nic->regs) {
1941 err = -EIO;
1942 pr_err("ioremap failed\n");
1943 goto err_out_res;
1944 }
1945
1946 if (pdev->irq < 2) {
1947 err = -EIO;
1948 pr_err("invalid irq (%d)\n", pdev->irq);
1949 goto err_out_iomap;
1950 }
1951 pci_set_drvdata(pdev, nic);
1952
1953 if (pdev->device == 0x3014)
1954 nic->port_num = 2;
1955 else
1956 nic->port_num = 1;
1957
1958 print_hw_id(pdev);
1959
1960 bdx_hw_reset_direct(nic->regs);
1961
1962 nic->irq_type = IRQ_INTX;
1963#ifdef BDX_MSI
1964 if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) {
1965 err = pci_enable_msi(pdev);
1966 if (err)
1967 pr_err("Can't eneble msi. error is %d\n", err);
1968 else
1969 nic->irq_type = IRQ_MSI;
1970 } else
1971 DBG("HW does not support MSI\n");
1972#endif
1973
1974 /************** netdev **************/
1975 for (port = 0; port < nic->port_num; port++) {
1976 ndev = alloc_etherdev(sizeof(struct bdx_priv));
1977 if (!ndev) {
1978 err = -ENOMEM;
1979 pr_err("alloc_etherdev failed\n");
1980 goto err_out_iomap;
1981 }
1982
1983 ndev->netdev_ops = &bdx_netdev_ops;
1984 ndev->tx_queue_len = BDX_NDEV_TXQ_LEN;
1985
1986 bdx_set_ethtool_ops(ndev); /* ethtool interface */
1987
1988 /* these fields are used for info purposes only
1989 * so we can have them same for all ports of the board */
1990 ndev->if_port = port;
1991 ndev->base_addr = pciaddr;
1992 ndev->mem_start = pciaddr;
1993 ndev->mem_end = pciaddr + regionSize;
1994 ndev->irq = pdev->irq;
1995 ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO
1996 | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
1997 NETIF_F_HW_VLAN_FILTER | NETIF_F_RXCSUM
1998 /*| NETIF_F_FRAGLIST */
1999 ;
2000 ndev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
2001 NETIF_F_TSO | NETIF_F_HW_VLAN_TX;
2002
2003 if (pci_using_dac)
2004 ndev->features |= NETIF_F_HIGHDMA;
2005
2006 /************** priv ****************/
2007 priv = nic->priv[port] = netdev_priv(ndev);
2008
2009 priv->pBdxRegs = nic->regs + port * 0x8000;
2010 priv->port = port;
2011 priv->pdev = pdev;
2012 priv->ndev = ndev;
2013 priv->nic = nic;
2014 priv->msg_enable = BDX_DEF_MSG_ENABLE;
2015
2016 netif_napi_add(ndev, &priv->napi, bdx_poll, 64);
2017
2018 if ((readl(nic->regs + FPGA_VER) & 0xFFF) == 308) {
2019 DBG("HW statistics not supported\n");
2020 priv->stats_flag = 0;
2021 } else {
2022 priv->stats_flag = 1;
2023 }
2024
2025 /* Initialize fifo sizes. */
2026 priv->txd_size = 2;
2027 priv->txf_size = 2;
2028 priv->rxd_size = 2;
2029 priv->rxf_size = 3;
2030
2031 /* Initialize the initial coalescing registers. */
2032 priv->rdintcm = INT_REG_VAL(0x20, 1, 4, 12);
2033 priv->tdintcm = INT_REG_VAL(0x20, 1, 0, 12);
2034
2035 /* ndev->xmit_lock spinlock is not used.
2036 * Private priv->tx_lock is used for synchronization
2037 * between transmit and TX irq cleanup. In addition
2038 * set multicast list callback has to use priv->tx_lock.
2039 */
2040#ifdef BDX_LLTX
2041 ndev->features |= NETIF_F_LLTX;
2042#endif
2043 spin_lock_init(&priv->tx_lock);
2044
2045 /*bdx_hw_reset(priv); */
2046 if (bdx_read_mac(priv)) {
2047 pr_err("load MAC address failed\n");
2048 goto err_out_iomap;
2049 }
2050 SET_NETDEV_DEV(ndev, &pdev->dev);
2051 err = register_netdev(ndev);
2052 if (err) {
2053 pr_err("register_netdev failed\n");
2054 goto err_out_free;
2055 }
2056 netif_carrier_off(ndev);
2057 netif_stop_queue(ndev);
2058
2059 print_eth_id(ndev);
2060 }
2061 RET(0);
2062
2063err_out_free:
2064 free_netdev(ndev);
2065err_out_iomap:
2066 iounmap(nic->regs);
2067err_out_res:
2068 pci_release_regions(pdev);
2069err_dma:
2070 pci_disable_device(pdev);
2071err_pci:
2072 vfree(nic);
2073
2074 RET(err);
2075}
2076
2077/****************** Ethtool interface *********************/
2078/* get strings for statistics counters */
2079static const char
2080 bdx_stat_names[][ETH_GSTRING_LEN] = {
2081 "InUCast", /* 0x7200 */
2082 "InMCast", /* 0x7210 */
2083 "InBCast", /* 0x7220 */
2084 "InPkts", /* 0x7230 */
2085 "InErrors", /* 0x7240 */
2086 "InDropped", /* 0x7250 */
2087 "FrameTooLong", /* 0x7260 */
2088 "FrameSequenceErrors", /* 0x7270 */
2089 "InVLAN", /* 0x7280 */
2090 "InDroppedDFE", /* 0x7290 */
2091 "InDroppedIntFull", /* 0x72A0 */
2092 "InFrameAlignErrors", /* 0x72B0 */
2093
2094 /* 0x72C0-0x72E0 RSRV */
2095
2096 "OutUCast", /* 0x72F0 */
2097 "OutMCast", /* 0x7300 */
2098 "OutBCast", /* 0x7310 */
2099 "OutPkts", /* 0x7320 */
2100
2101 /* 0x7330-0x7360 RSRV */
2102
2103 "OutVLAN", /* 0x7370 */
2104 "InUCastOctects", /* 0x7380 */
2105 "OutUCastOctects", /* 0x7390 */
2106
2107 /* 0x73A0-0x73B0 RSRV */
2108
2109 "InBCastOctects", /* 0x73C0 */
2110 "OutBCastOctects", /* 0x73D0 */
2111 "InOctects", /* 0x73E0 */
2112 "OutOctects", /* 0x73F0 */
2113};
2114
2115/*
2116 * bdx_get_settings - get device-specific settings
2117 * @netdev
2118 * @ecmd
2119 */
2120static int bdx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
2121{
2122 u32 rdintcm;
2123 u32 tdintcm;
2124 struct bdx_priv *priv = netdev_priv(netdev);
2125
2126 rdintcm = priv->rdintcm;
2127 tdintcm = priv->tdintcm;
2128
2129 ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
2130 ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
2131 ethtool_cmd_speed_set(ecmd, SPEED_10000);
2132 ecmd->duplex = DUPLEX_FULL;
2133 ecmd->port = PORT_FIBRE;
2134 ecmd->transceiver = XCVR_EXTERNAL; /* what does it mean? */
2135 ecmd->autoneg = AUTONEG_DISABLE;
2136
2137 /* PCK_TH measures in multiples of FIFO bytes
2138 We translate to packets */
2139 ecmd->maxtxpkt =
2140 ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ);
2141 ecmd->maxrxpkt =
2142 ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc));
2143
2144 return 0;
2145}
2146
2147/*
2148 * bdx_get_drvinfo - report driver information
2149 * @netdev
2150 * @drvinfo
2151 */
2152static void
2153bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
2154{
2155 struct bdx_priv *priv = netdev_priv(netdev);
2156
2157 strlcat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver));
2158 strlcat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version));
2159 strlcat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
2160 strlcat(drvinfo->bus_info, pci_name(priv->pdev),
2161 sizeof(drvinfo->bus_info));
2162
2163 drvinfo->n_stats = ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names) : 0);
2164 drvinfo->testinfo_len = 0;
2165 drvinfo->regdump_len = 0;
2166 drvinfo->eedump_len = 0;
2167}
2168
2169/*
2170 * bdx_get_coalesce - get interrupt coalescing parameters
2171 * @netdev
2172 * @ecoal
2173 */
2174static int
2175bdx_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
2176{
2177 u32 rdintcm;
2178 u32 tdintcm;
2179 struct bdx_priv *priv = netdev_priv(netdev);
2180
2181 rdintcm = priv->rdintcm;
2182 tdintcm = priv->tdintcm;
2183
2184 /* PCK_TH measures in multiples of FIFO bytes
2185 We translate to packets */
2186 ecoal->rx_coalesce_usecs = GET_INT_COAL(rdintcm) * INT_COAL_MULT;
2187 ecoal->rx_max_coalesced_frames =
2188 ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc));
2189
2190 ecoal->tx_coalesce_usecs = GET_INT_COAL(tdintcm) * INT_COAL_MULT;
2191 ecoal->tx_max_coalesced_frames =
2192 ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ);
2193
2194 /* adaptive parameters ignored */
2195 return 0;
2196}
2197
2198/*
2199 * bdx_set_coalesce - set interrupt coalescing parameters
2200 * @netdev
2201 * @ecoal
2202 */
2203static int
2204bdx_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal)
2205{
2206 u32 rdintcm;
2207 u32 tdintcm;
2208 struct bdx_priv *priv = netdev_priv(netdev);
2209 int rx_coal;
2210 int tx_coal;
2211 int rx_max_coal;
2212 int tx_max_coal;
2213
2214 /* Check for valid input */
2215 rx_coal = ecoal->rx_coalesce_usecs / INT_COAL_MULT;
2216 tx_coal = ecoal->tx_coalesce_usecs / INT_COAL_MULT;
2217 rx_max_coal = ecoal->rx_max_coalesced_frames;
2218 tx_max_coal = ecoal->tx_max_coalesced_frames;
2219
2220 /* Translate from packets to multiples of FIFO bytes */
2221 rx_max_coal =
2222 (((rx_max_coal * sizeof(struct rxf_desc)) + PCK_TH_MULT - 1)
2223 / PCK_TH_MULT);
2224 tx_max_coal =
2225 (((tx_max_coal * BDX_TXF_DESC_SZ) + PCK_TH_MULT - 1)
2226 / PCK_TH_MULT);
2227
2228 if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF) ||
2229 (rx_max_coal > 0xF) || (tx_max_coal > 0xF))
2230 return -EINVAL;
2231
2232 rdintcm = INT_REG_VAL(rx_coal, GET_INT_COAL_RC(priv->rdintcm),
2233 GET_RXF_TH(priv->rdintcm), rx_max_coal);
2234 tdintcm = INT_REG_VAL(tx_coal, GET_INT_COAL_RC(priv->tdintcm), 0,
2235 tx_max_coal);
2236
2237 priv->rdintcm = rdintcm;
2238 priv->tdintcm = tdintcm;
2239
2240 WRITE_REG(priv, regRDINTCM0, rdintcm);
2241 WRITE_REG(priv, regTDINTCM0, tdintcm);
2242
2243 return 0;
2244}
2245
2246/* Convert RX fifo size to number of pending packets */
2247static inline int bdx_rx_fifo_size_to_packets(int rx_size)
2248{
2249 return (FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc);
2250}
2251
2252/* Convert TX fifo size to number of pending packets */
2253static inline int bdx_tx_fifo_size_to_packets(int tx_size)
2254{
2255 return (FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ;
2256}
2257
2258/*
2259 * bdx_get_ringparam - report ring sizes
2260 * @netdev
2261 * @ring
2262 */
2263static void
2264bdx_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
2265{
2266 struct bdx_priv *priv = netdev_priv(netdev);
2267
2268 /*max_pending - the maximum-sized FIFO we allow */
2269 ring->rx_max_pending = bdx_rx_fifo_size_to_packets(3);
2270 ring->tx_max_pending = bdx_tx_fifo_size_to_packets(3);
2271 ring->rx_pending = bdx_rx_fifo_size_to_packets(priv->rxf_size);
2272 ring->tx_pending = bdx_tx_fifo_size_to_packets(priv->txd_size);
2273}
2274
2275/*
2276 * bdx_set_ringparam - set ring sizes
2277 * @netdev
2278 * @ring
2279 */
2280static int
2281bdx_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
2282{
2283 struct bdx_priv *priv = netdev_priv(netdev);
2284 int rx_size = 0;
2285 int tx_size = 0;
2286
2287 for (; rx_size < 4; rx_size++) {
2288 if (bdx_rx_fifo_size_to_packets(rx_size) >= ring->rx_pending)
2289 break;
2290 }
2291 if (rx_size == 4)
2292 rx_size = 3;
2293
2294 for (; tx_size < 4; tx_size++) {
2295 if (bdx_tx_fifo_size_to_packets(tx_size) >= ring->tx_pending)
2296 break;
2297 }
2298 if (tx_size == 4)
2299 tx_size = 3;
2300
2301 /*Is there anything to do? */
2302 if ((rx_size == priv->rxf_size) &&
2303 (tx_size == priv->txd_size))
2304 return 0;
2305
2306 priv->rxf_size = rx_size;
2307 if (rx_size > 1)
2308 priv->rxd_size = rx_size - 1;
2309 else
2310 priv->rxd_size = rx_size;
2311
2312 priv->txf_size = priv->txd_size = tx_size;
2313
2314 if (netif_running(netdev)) {
2315 bdx_close(netdev);
2316 bdx_open(netdev);
2317 }
2318 return 0;
2319}
2320
2321/*
2322 * bdx_get_strings - return a set of strings that describe the requested objects
2323 * @netdev
2324 * @data
2325 */
2326static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
2327{
2328 switch (stringset) {
2329 case ETH_SS_STATS:
2330 memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names));
2331 break;
2332 }
2333}
2334
2335/*
2336 * bdx_get_sset_count - return number of statistics or tests
2337 * @netdev
2338 */
2339static int bdx_get_sset_count(struct net_device *netdev, int stringset)
2340{
2341 struct bdx_priv *priv = netdev_priv(netdev);
2342
2343 switch (stringset) {
2344 case ETH_SS_STATS:
2345 BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
2346 != sizeof(struct bdx_stats) / sizeof(u64));
2347 return (priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names) : 0;
2348 }
2349
2350 return -EINVAL;
2351}
2352
2353/*
2354 * bdx_get_ethtool_stats - return device's hardware L2 statistics
2355 * @netdev
2356 * @stats
2357 * @data
2358 */
2359static void bdx_get_ethtool_stats(struct net_device *netdev,
2360 struct ethtool_stats *stats, u64 *data)
2361{
2362 struct bdx_priv *priv = netdev_priv(netdev);
2363
2364 if (priv->stats_flag) {
2365
2366 /* Update stats from HW */
2367 bdx_update_stats(priv);
2368
2369 /* Copy data to user buffer */
2370 memcpy(data, &priv->hw_stats, sizeof(priv->hw_stats));
2371 }
2372}
2373
2374/*
2375 * bdx_set_ethtool_ops - ethtool interface implementation
2376 * @netdev
2377 */
2378static void bdx_set_ethtool_ops(struct net_device *netdev)
2379{
2380 static const struct ethtool_ops bdx_ethtool_ops = {
2381 .get_settings = bdx_get_settings,
2382 .get_drvinfo = bdx_get_drvinfo,
2383 .get_link = ethtool_op_get_link,
2384 .get_coalesce = bdx_get_coalesce,
2385 .set_coalesce = bdx_set_coalesce,
2386 .get_ringparam = bdx_get_ringparam,
2387 .set_ringparam = bdx_set_ringparam,
2388 .get_strings = bdx_get_strings,
2389 .get_sset_count = bdx_get_sset_count,
2390 .get_ethtool_stats = bdx_get_ethtool_stats,
2391 };
2392
2393 SET_ETHTOOL_OPS(netdev, &bdx_ethtool_ops);
2394}
2395
2396/**
2397 * bdx_remove - Device Removal Routine
2398 * @pdev: PCI device information struct
2399 *
2400 * bdx_remove is called by the PCI subsystem to alert the driver
2401 * that it should release a PCI device. The could be caused by a
2402 * Hot-Plug event, or because the driver is going to be removed from
2403 * memory.
2404 **/
2405static void __devexit bdx_remove(struct pci_dev *pdev)
2406{
2407 struct pci_nic *nic = pci_get_drvdata(pdev);
2408 struct net_device *ndev;
2409 int port;
2410
2411 for (port = 0; port < nic->port_num; port++) {
2412 ndev = nic->priv[port]->ndev;
2413 unregister_netdev(ndev);
2414 free_netdev(ndev);
2415 }
2416
2417 /*bdx_hw_reset_direct(nic->regs); */
2418#ifdef BDX_MSI
2419 if (nic->irq_type == IRQ_MSI)
2420 pci_disable_msi(pdev);
2421#endif
2422
2423 iounmap(nic->regs);
2424 pci_release_regions(pdev);
2425 pci_disable_device(pdev);
2426 pci_set_drvdata(pdev, NULL);
2427 vfree(nic);
2428
2429 RET();
2430}
2431
2432static struct pci_driver bdx_pci_driver = {
2433 .name = BDX_DRV_NAME,
2434 .id_table = bdx_pci_tbl,
2435 .probe = bdx_probe,
2436 .remove = __devexit_p(bdx_remove),
2437};
2438
2439/*
2440 * print_driver_id - print parameters of the driver build
2441 */
2442static void __init print_driver_id(void)
2443{
2444 pr_info("%s, %s\n", BDX_DRV_DESC, BDX_DRV_VERSION);
2445 pr_info("Options: hw_csum %s\n", BDX_MSI_STRING);
2446}
2447
2448static int __init bdx_module_init(void)
2449{
2450 ENTER;
2451 init_txd_sizes();
2452 print_driver_id();
2453 RET(pci_register_driver(&bdx_pci_driver));
2454}
2455
2456module_init(bdx_module_init);
2457
2458static void __exit bdx_module_exit(void)
2459{
2460 ENTER;
2461 pci_unregister_driver(&bdx_pci_driver);
2462 RET();
2463}
2464
2465module_exit(bdx_module_exit);
2466
2467MODULE_LICENSE("GPL");
2468MODULE_AUTHOR(DRIVER_AUTHOR);
2469MODULE_DESCRIPTION(BDX_DRV_DESC);
2470MODULE_FIRMWARE("tehuti/bdx.bin");
generated by cgit v1.2.2 (git 2.25.0) at 2026-01-09 06:34:20 -0500